| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ovl_lseek() is using ssize_t to return the value from vfs_llseek(). On a
32-bit kernel ssize_t is a 32-bit signed int, which overflows above 2 GB.
Assign the return value of vfs_llseek() to loff_t to fix this.
Reported-by: Boris Gjenero <boris.gjenero@gmail.com>
Fixes: 9e46b840c705 ("ovl: support stacked SEEK_HOLE/SEEK_DATA")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Now overlayfs falls back to use default file splice read
and write, which is not compatiple with overlayfs, returning
EFAULT. xfstests generic/591 can reproduce part of this.
Tested this patch with xfstests auto group tests.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
A performance regression was observed since linux v4.19 with aio test using
fio with iodepth 128 on overlayfs. The queue depth of the device was
always 1 which is unexpected.
After investigation, it was found that commit 16914e6fc7e1 ("ovl: add
ovl_read_iter()") and commit 2a92e07edc5e ("ovl: add ovl_write_iter()")
resulted in vfs_iter_{read,write} being called on underlying filesystem,
which always results in syncronous IO.
Implement async IO for stacked reading and writing. This resolves the
performance regresion.
This is implemented by allocating a new kiocb for submitting the AIO
request on the underlying filesystem. When the request is completed, the
new kiocb is freed and the completion callback is called on the original
iocb.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The ovl_layer struct is never modified except at initialization.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs, but if lower layer is on the
same fs and upper layer, it has no pseudo_dev assigned.
In this overlay layers setup:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the
st_dev;st_ino values of the real lower inode before copy up and the
st_dev;st_ino values of the real upper inode after copy up.
Fix this inconsitency by assigning a unique pseudo_dev also for upper fs,
that will be used as st_dev value along with the lower inode st_dev for
overlay inodes in the case above.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This fixes ovl_lower_uuid_ok() to correctly detect the corner case:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case, bad_uuid would not have been set for B, because the check
only involved the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We check for conflicting (and null) uuid among all lower layers, including
those layers that are on the same fs as the upper layer.
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Rename lower_fs[] array to fs[], extend its size by one and use index fsid
(instead of fsid-1) to access the fs[] array.
Initialize fs[0] with upper fs values. fsid 0 is reserved even with lower
only overlay, so fs[0] remains null in this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
No code uses the sb returned from this helper, so make it retrun a boolean
and rename it to ovl_same_fs().
The xino mode is irrelevant when all layers are on same fs, so instead of
describing samefs with mode OVL_XINO_OFF, use a new xino_mode state, which
is 0 in the case of samefs, -1 in the case of xino=off and > 0 with xino
enabled.
Create a new helper ovl_same_dev(), to use instead of the common check for
(ovl_same_fs() || xinobits).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Rename lower_layers[] array to layers[], extend its size by one and
initialize layers[0] with upper layer values. Lower layers are now
addressed with index 1..numlower. layers[0] is reserved even with lower
only overlay.
[SzM: replace ofs->numlower with ofs->numlayer, the latter's value is
incremented by one]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Current copy-up is not efficient for big sparse file,
It's not only slow but also wasting more disk space
when the target lower file has huge hole inside.
This patch tries to recognize file hole and skip it
during copy-up.
Detail logic of hole detection as below:
When we detect next data position is larger than current
position we will skip that hole, otherwise we copy
data in the size of OVL_COPY_UP_CHUNK_SIZE. Actually,
it may not recognize all kind of holes and sometimes
only skips partial of hole area. However, it will be
enough for most of the use cases.
Additionally, this optimization relies on lseek(2)
SEEK_DATA implementation, so for some specific
filesystems which do not support this feature
will behave as before on copy-up.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In ovl_llseek() we use the overlay inode rwsem to protect against
concurrent modifications to real file f_pos, because we copy the overlay
file f_pos to/from the real file f_pos.
This caused a lockdep warning of locking order violation when the
ovl_llseek() operation was called on a lower nested overlay layer while the
upper layer fs sb_writers is held (with patch improving copy-up efficiency
for big sparse file).
Use the internal ovl_inode_lock() instead of the overlay inode rwsem in
those cases. It is meant to be used for protecting against concurrent
changes to overlay inode internal state changes.
The locking order rules are documented to explain this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Use pr_fmt auto generate "overlayfs: " prefix.
Signed-off-by: lijiazi <lijiazi@xiaomi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The WARN_ON() that child entry is always on overlay st_dev became wrong
when we allowed this function to update d_ino in non-samefs setup with xino
enabled.
It is not true in case of xino bits overflow on a non-dir inode. Leave the
WARN_ON() only for directories, where assertion is still true.
Fixes: adbf4f7ea834 ("ovl: consistent d_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix some bugs and documentation"
* tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
docs: filesystems: overlayfs: Fix restview warnings
docs: filesystems: overlayfs: Rename overlayfs.txt to .rst
ovl: relax WARN_ON() on rename to self
ovl: fix corner case of non-unique st_dev;st_ino
ovl: don't use a temp buf for encoding real fh
ovl: make sure that real fid is 32bit aligned in memory
ovl: fix lookup failure on multi lower squashfs
|
|
In ovl_rename(), if new upper is hardlinked to old upper underneath
overlayfs before upper dirs are locked, user will get an ESTALE error
and a WARN_ON will be printed.
Changes to underlying layers while overlayfs is mounted may result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON().
Reported-by: syzbot+bb1836a212e69f8e201a@syzkaller.appspotmail.com
Fixes: 804032fabb3b ("ovl: don't check rename to self")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs and pure upper inodes use the
real upper st_dev.
It is fine for an overlay pure upper inode to use the same st_dev;st_ino
values as the real upper inode, because the content of those two different
filesystem objects is always the same.
In this case, however:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the same
st_dev;st_ino values as the real lower inode. This may result with a false
positive results of 'diff' between the real lower and copied up overlay
inode.
Fix this by using the upper st_dev;st_ino values in this case. This breaks
the property of constant st_dev;st_ino across copy up of this case. This
breakage will be fixed by a later patch.
Fixes: 5148626b806a ("ovl: allocate anon bdev per unique lower fs")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We can allocate maximum fh size and encode into it directly.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Seprate on-disk encoding from in-memory and on-wire resresentation
of overlay file handle.
In-memory and on-wire we only ever pass around pointers to struct
ovl_fh, which encapsulates at offset 3 the on-disk format struct
ovl_fb. struct ovl_fb encapsulates at offset 21 the real file handle.
That makes sure that the real file handle is always 32bit aligned
in-memory when passed down to the underlying filesystem.
On-disk format remains the same and store/load are done into
correctly aligned buffer.
New nfs exported file handles are exported with aligned real fid.
Old nfs file handles are copied to an aligned buffer before being
decoded.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In the past, overlayfs required that lower fs have non null uuid in
order to support nfs export and decode copy up origin file handles.
Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of
lower fs") relaxed this requirement for nfs export support, as long
as uuid (even if null) is unique among all lower fs.
However, said commit unintentionally also relaxed the non null uuid
requirement for decoding copy up origin file handles, regardless of
the unique uuid requirement.
Amend this mistake by disabling decoding of copy up origin file handle
from lower fs with a conflicting uuid.
We still encode copy up origin file handles from those fs, because
file handles like those already exist in the wild and because they
might provide useful information in the future.
There is an unhandled corner case described by Miklos this way:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case bad_uuid won't be set for B, because the check only
involves the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We will deal with this corner case later.
Reported-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/
Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When filtering xattr list for reading, presence of trusted xattr
results in a security audit log. However, if there is other content
no errno will be set, and if there isn't, the errno will be -ENODATA
and not -EPERM as is usually associated with a lack of capability.
The check does not block the request to list the xattrs present.
Switch to ns_capable_noaudit to reflect a more appropriate check.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-security-module@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org # v3.18+
Fixes: a082c6f680da ("ovl: filter trusted xattr for non-admin")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
if ovl_encode_real_fh() fails, no memory was allocated
and the error in the error-valued pointer should be returned.
Fixes: 9b6faee07470 ("ovl: check ERR_PTR() return value from ovl_encode_fh()")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on
upper/work dirs") in v4.13 added some sanity checks on overlayfs layers.
This change caused a docker regression. The root cause was mount leaks
by docker, which as far as I know, still exist.
To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression
caused by exclusive upper/work dir protection") in v4.14 turned the
mount errors into warnings for the default index=off configuration.
Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in
v5.2, re-introduced exclusive upper/work dir checks regardless of
index=off configuration.
This changes the status quo and mount leak related bug reports have
started to re-surface. Restore the status quo to fix the regressions.
To clarify, index=off does NOT relax overlapping layers check for this
ovelayfs mount. index=off only relaxes exclusive upper/work dir checks
with another overlayfs mount.
To cover the part of overlapping layers detection that used the
exclusive upper/work dir checks to detect overlap with self upper/work
dir, add a trap also on the work base dir.
Link: https://github.com/moby/moby/issues/34672
Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/
Link: https://github.com/containers/libpod/issues/3540
Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Colin Walters <walters@verbum.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Relax the condition that overlayfs supports nfs export, to require
that i_ino is consistent with st_ino/d_ino.
It is enough to require that st_ino and d_ino are consistent.
This fixes the failure of xfstest generic/504, due to mismatch of
st_ino to inode number in the output of /proc/locks.
Fixes: 12574a9f4c9c ("ovl: consistent i_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Change first argument to MODULE_PARM_DESC() calls, that each of them
matched the actual module parameter name. The matching results in
changing (the 'parm' section from) the output of `modinfo overlay` from:
parm: ovl_check_copy_up:Obsolete; does nothing
parm: redirect_max:ushort
parm: ovl_redirect_max:Maximum length of absolute redirect xattr value
parm: redirect_dir:bool
parm: ovl_redirect_dir_def:Default to on or off for the redirect_dir feature
parm: redirect_always_follow:bool
parm: ovl_redirect_always_follow:Follow redirects even if redirect_dir feature is turned off
parm: index:bool
parm: ovl_index_def:Default to on or off for the inodes index feature
parm: nfs_export:bool
parm: ovl_nfs_export_def:Default to on or off for the NFS export feature
parm: xino_auto:bool
parm: ovl_xino_auto_def:Auto enable xino feature
parm: metacopy:bool
parm: ovl_metacopy_def:Default to on or off for the metadata only copy up feature
into:
parm: check_copy_up:Obsolete; does nothing
parm: redirect_max:Maximum length of absolute redirect xattr value (ushort)
parm: redirect_dir:Default to on or off for the redirect_dir feature (bool)
parm: redirect_always_follow:Follow redirects even if redirect_dir feature is turned off (bool)
parm: index:Default to on or off for the inodes index feature (bool)
parm: nfs_export:Default to on or off for the NFS export feature (bool)
parm: xino_auto:Auto enable xino feature (bool)
parm: metacopy:Default to on or off for the metadata only copy up feature (bool)
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
gcc gets a bit confused by the logic in ovl_setup_trap() and
can't figure out whether the local 'trap' variable in the caller
was initialized or not:
fs/overlayfs/super.c: In function 'ovl_fill_super':
fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized]
iput(trap);
^~~~~~~~~~
fs/overlayfs/super.c:1312:17: note: 'trap' was declared here
Reword slightly to make it easier for the compiler to understand.
Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
NFS mounts can be disconnected from fs root. Don't fail the overlapping
layer check because of this.
The check is not authoritative anyway, since topology can change during or
after the check.
Reported-by: Antti Antinoja <antti@fennosys.fi>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
|
|
The ioctl argument was parsed as the wrong type.
Fixes: b21d9c435f93 ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Overlapping overlay layers are not supported and can cause unexpected
behavior, but overlayfs does not currently check or warn about these
configurations.
User is not supposed to specify the same directory for upper and
lower dirs or for different lower layers and user is not supposed to
specify directories that are descendants of each other for overlay
layers, but that is exactly what this zysbot repro did:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Moving layer root directories into other layers while overlayfs
is mounted could also result in unexpected behavior.
This commit places "traps" in the overlay inode hash table.
Those traps are dummy overlay inodes that are hashed by the layers
root inodes.
On mount, the hash table trap entries are used to verify that overlay
layers are not overlapping. While at it, we also verify that overlay
layers are not overlapping with directories "in-use" by other overlay
instances as upperdir/workdir.
On lookup, the trap entries are used to verify that overlay layers
root inodes have not been moved into other layers after mount.
Some examples:
$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
mount -o bind base/lower lower
mount -o bind base/upper upper
mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
-o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
[ 94.434900] overlayfs: overlapping upperdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
[ 151.350132] overlayfs: conflicting lowerdir path
mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
-o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
[ 201.205045] overlayfs: overlapping lowerdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
mnt/0
mnt/0/w
find: 'mnt/0/w/work': Too many levels of symbolic links
find: 'mnt/0/u': Too many levels of symbolic links
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
They are the extended version of FS_IOC_FS[SG]ETFLAGS ioctls.
xfs_io -c "chattr <flags>" uses the new ioctls for setting flags.
This used to work in kernel pre v4.19, before stacked file ops
introduced the ovl_ioctl whitelist.
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: d1d04ef8572b ("ovl: stack file ops")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
"Just bug fixes in this small update"
* tag 'ovl-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: relax WARN_ON() for overlapping layers use case
ovl: check the capability before cred overridden
ovl: do not generate duplicate fsnotify events for "fake" path
ovl: support stacked SEEK_HOLE/SEEK_DATA
ovl: fix missing upper fs freeze protection on copy up for ioctl
|
|
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc dcache updates from Al Viro:
"Most of this pile is putting name length into struct name_snapshot and
making use of it.
The beginning of this series ("ovl_lookup_real_one(): don't bother
with strlen()") ought to have been split in two (separate switch of
name_snapshot to struct qstr from overlayfs reaping the trivial
benefits of that), but I wanted to avoid a rebase - by the time I'd
spotted that it was (a) in -next and (b) close to 5.1-final ;-/"
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit_compare_dname_path(): switch to const struct qstr *
audit_update_watch(): switch to const struct qstr *
inotify_handle_event(): don't bother with strlen()
fsnotify: switch send_to_group() and ->handle_event to const struct qstr *
fsnotify(): switch to passing const struct qstr * for file_name
switch fsnotify_move() to passing const struct qstr * for old_name
ovl_lookup_real_one(): don't bother with strlen()
sysv: bury the broken "quietly truncate the long filenames" logics
nsfs: unobfuscate
unexport d_alloc_pseudo()
|
|
We found that it return success when we set IMMUTABLE_FL flag to a file in
docker even though the docker didn't have the capability
CAP_LINUX_IMMUTABLE.
The commit d1d04ef8572b ("ovl: stack file ops") and dab5ca8fd9dd ("ovl: add
lsattr/chattr support") implemented chattr operations on a regular overlay
file. ovl_real_ioctl() overridden the current process's subjective
credentials with ofs->creator_cred which have the capability
CAP_LINUX_IMMUTABLE so that it will return success in
vfs_ioctl()->cap_capable().
Fix this by checking the capability before cred overridden. And here we
only care about APPEND_FL and IMMUTABLE_FL, so get these information from
inode.
[SzM: move check and call to underlying fs inside inode locked region to
prevent two such calls from racing with each other]
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Overlayfs "fake" path is used for stacked file operations on underlying
files. Operations on files with "fake" path must not generate fsnotify
events with path data, because those events have already been generated at
overlayfs layer and because the reported event->fd for fanotify marks on
underlying inode/filesystem will have the wrong path (the overlayfs path).
Link: https://lore.kernel.org/linux-fsdevel/20190423065024.12695-1-jencce.kernel@gmail.com/
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: d1d04ef8572b ("ovl: stack file ops")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Overlay file f_pos is the master copy that is preserved
through copy up and modified on read/write, but only real
fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose
limitations that are more strict than ->s_maxbytes for specific
files, so we use the real file to perform seeks.
We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0
requests.
Fixes: d1d04ef8572b ("ovl: stack file ops")
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.
The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion. File may be open O_RDONLY, but ioctl modifies the
file. VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.
Fixes: dab5ca8fd9dd ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
synchronous parts are left in ->destroy_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If a file has been copied up metadata only, and later data is copied up,
upper loses any security.capability xattr it has (underlying filesystem
clears it as upon file write).
From a user's point of view, this is just a file copy-up and that should
not result in losing security.capability xattr. Hence, before data copy
up, save security.capability xattr (if any) and restore it on upper after
data copy up is complete.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 0c2888749363 ("ovl: A new xattr OVL_XATTR_METACOPY for file on upper")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If a file with capability set (and hence security.capability xattr) is
written kernel clears security.capability xattr. For overlay, during file
copy up if xattrs are copied up first and then data is, copied up. This
means data copy up will result in clearing of security.capability xattr
file on lower has. And this can result into surprises. If a lower file has
CAP_SETUID, then it should not be cleared over copy up (if nothing was
actually written to file).
This also creates problems with chown logic where it first copies up file
and then tries to clear setuid bit. But by that time security.capability
xattr is already gone (due to data copy up), and caller gets -ENODATA.
This has been reported by Giuseppe here.
https://github.com/containers/libpod/issues/2015#issuecomment-447824842
Fix this by copying up data first and then metadta. This is a regression
which has been introduced by my commit as part of metadata only copy up
patches.
TODO: There will be some corner cases where a file is copied up metadata
only and later data copy up happens and that will clear security.capability
xattr. Something needs to be done about that too.
Fixes: bd64e57586d3 ("ovl: During copy up, first copy up metadata and then data")
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This reverts commit 007ea44892e6fa963a0876a979e34890325c64eb.
The commit broke some selinux-testsuite cases, and it looks like there's no
straightforward fix keeping the direction of this patch, so revert for now.
The original patch was trying to fix the consistency of permission checks, and
not an observed bug. So reverting should be safe.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When decoding a lower file handle, we first call ovl_check_origin_fh()
with connected=false to get any real lower dentry for overlay inode
cache lookup.
If the real dentry is a disconnected dir dentry, ovl_check_origin_fh()
is called again with connected=true to get a connected real dentry
and find the lower layer the real dentry belongs to.
If the first call returned a connected real dentry, we use it to
lookup an overlay connected dentry, but the first ovl_check_origin_fh()
call with connected=false did not check that the found dentry is under
the root of the layer (see ovl_acceptable()), it only checked that
the found dentry super block matches the uuid of the lower file handle.
In case there are multiple lower layers on the same fs and the found
dentry is not from the top most lower layer, using the layer index
returned from the first ovl_check_origin_fh() is wrong and we end
up failing to decode the file handle.
Fix this by always calling ovl_check_origin_fh() with connected=true
if we got a directory dentry in the first call.
Fixes: 8b58924ad55c ("ovl: lookup in inode cache first when decoding...")
Cc: <stable@vger.kernel.org> # v4.17
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Theodore Ts'o reported a v4.19 regression with docker-dropbox:
https://marc.info/?l=linux-fsdevel&m=154070089431116&w=2
"I was rebuilding my dropbox Docker container, and it failed in 4.19
with the following error:
...
dpkg: error: error creating new backup file \
'/var/lib/dpkg/status-old': Invalid cross-device link"
The problem did not reproduce with metacopy feature disabled.
The error was caused by insufficient credentials to set
"trusted.overlay.redirect" xattr on link of a metacopy file.
Reproducer:
echo Y > /sys/module/overlay/parameters/redirect_dir
echo Y > /sys/module/overlay/parameters/metacopy
cd /tmp
mkdir l u w m
chmod 777 l u
touch l/foo
ln l/foo l/link
chmod 666 l/foo
mount -t overlay none -olowerdir=l,upperdir=u,workdir=w m
su fsgqa
ln m/foo m/bar
[ 21.455823] overlayfs: failed to set redirect (-1)
ln: failed to create hard link 'm/bar' => 'm/foo':\
Invalid cross-device link
Reported-by: Theodore Y. Ts'o <tytso@mit.edu>
Reported-by: Maciej Zięba <maciekz82@gmail.com>
Fixes: 4120fe64dce4 ("ovl: Set redirect on upper inode when it is linked")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
|
|
Current behavior is to automatically disable metacopy if redirect_dir is
not enabled and proceed with the mount.
If "metacopy=on" mount option was given, then this behavior can confuse the
user: no mount failure, yet metacopy is disabled.
This patch makes metacopy=on imply redirect_dir=on.
The converse is also true: turning off full redirect with redirect_dir=
{off|follow|nofollow} will disable metacopy.
If both metacopy=on and redirect_dir={off|follow|nofollow} is specified,
then mount will fail, since there's no way to correctly resolve the
conflict.
Reported-by: Daniel Walsh <dwalsh@redhat.com>
Fixes: d5791044d2e5 ("ovl: Provide a mount option metacopy=on/off...")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it. This is a
reproducer:
mkdir lower upper work merge
touch lower/file
mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
rm merge/file
ls -al merge/file
rm upper/file
ls -al merge/
mkdir merge/file
Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.
Reported by: kaixuxia <xiakaixu1987@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e9be9d5e76e3 ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
|
