summaryrefslogtreecommitdiffstats
path: root/fs/overlayfs/util.c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-13ovl: Do not lose security.capability xattr over metadata file copy-upVivek Goyal1-20/+35
If a file has been copied up metadata only, and later data is copied up, upper loses any security.capability xattr it has (underlying filesystem clears it as upon file write). From a user's point of view, this is just a file copy-up and that should not result in losing security.capability xattr. Hence, before data copy up, save security.capability xattr (if any) and restore it on upper after data copy up is complete. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: 0c2888749363 ("ovl: A new xattr OVL_XATTR_METACOPY for file on upper") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-26ovl: abstract ovl_inode lock with a helperAmir Goldstein1-12/+13
The abstraction improves code readabilty (to some). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-26ovl: remove the 'locked' argument of ovl_nlink_{start,end}Amir Goldstein1-16/+12
It just makes the interface strange without adding any significant value. The only case where locked is false and return value is 0 is in ovl_rename() when new is negative, so handle that case explicitly in ovl_rename(). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-26ovl: relax requirement for non null uuid of lower fsAmir Goldstein1-2/+1
We use uuid to associate an overlay lower file handle with a lower layer, so we can accept lower fs with null uuid as long as all lower layers with null uuid are on the same fs. This change allows enabling index and nfs_export features for the setup of single lower fs of type squashfs - squashfs supports file handles, but has a null uuid. This change also allows enabling index and nfs_export features for nested overlayfs, where the lower overlay has nfs_export enabled. Enabling the index feature with single lower squashfs fixes the unionmount-testsuite test: ./run --ov --squashfs --verify As a by-product, if, like the lower squashfs, upper fs also uses the generic export_encode_fh() implementation to export 32bit inode file handles (e.g. ext4), then the xino_auto config/module/mount option will enable unique overlay inode numbers. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-24ovl: fix memory leak on unlink of indexed fileAmir Goldstein1-1/+2
The memory leak was detected by kmemleak when running xfstests overlay/051,053 Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Check redirect on index as wellVivek Goyal1-0/+50
Right now we seem to check redirect only if upperdentry is found. But it is possible that there is no upperdentry but later we found an index. We need to check redirect on index as well and set it in ovl_inode->redirect. Otherwise link code can assume that dentry does not have redirect and place a new one which breaks things. In my testing overlay/033 test started failing in xfstests. Following are the details. For example do following. $ mkdir lower upper work merged - Make lower dir with 4 links. $ echo "foo" > lower/l0.txt $ ln lower/l0.txt lower/l1.txt $ ln lower/l0.txt lower/l2.txt $ ln lower/l0.txt lower/l3.txt - Mount with index on and metacopy on. $ mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work,\ index=on,metacopy=on none merged - Link lower $ ln merged/l0.txt merged/l4.txt (This will metadata copy up of l0.txt and put an absolute redirect /l0.txt) $ echo 2 > /proc/sys/vm/drop/caches $ ls merged/l1.txt (Now l1.txt will be looked up. There is no upper dentry but there is lower dentry and index will be found. We don't check for redirect on index, hence ovl_inode->redirect will be NULL.) - Link Upper $ ln merged/l4.txt merged/l5.txt (Lookup of l4.txt will use inode from l1.txt lookup which is still in cache. It has ovl_inode->redirect NULL, hence link will put a new redirect and replace /l0.txt with /l4.txt - Drop caches. echo 2 > /proc/sys/vm/drop_caches - List l1.txt and it returns -ESTALE $ ls merged/l0.txt (It returns stale because, we found a metacopy of l0.txt in upper and it has redirect l4.txt but there is no file named l4.txt in lower layer. So lower data copy is not found and -ESTALE is returned.) So problem here is that we did not process redirect on index. Check redirect on index as well and then problem is fixed. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Do not set dentry type ORIGIN for broken hardlinksVivek Goyal1-1/+2
If a dentry has copy up origin, we set flag OVL_PATH_ORIGIN. So far this decision was easy that we had to check only for oe->numlower and if it is non-zero, we knew there is copy up origin. (For non-dir we installed origin dentry in lowerstack[0]). But we don't create ORGIN xattr for broken hardlinks (index=off). And with metacopy feature it is possible that we will install lowerstack[0] but ORIGIN xattr is not there. It is data dentry of upper metacopy dentry which has been found using regular name based lookup or using REDIRECT. So with addition of this new case, just presence of oe->numlower is not sufficient to guarantee that ORIGIN xattr is present. So to differentiate between two cases, look at OVL_CONST_INO flag. If this flag is set and upperdentry is there, that means it can be marked as type ORIGIN. OVL_CONST_INO is not set if lower hardlink is broken or will be broken over copy up. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Treat metacopy dentries as type OVL_PATH_MERGEVivek Goyal1-1/+2
Right now OVL_PATH_MERGE is used only for merged directories. But conceptually, a metacopy dentry (backed by a lower data dentry) is a merged entity as well. So mark metacopy dentries as OVL_PATH_MERGE and ovl_rename() makes use of this property later to set redirect on a metacopy file. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Add helper ovl_inode_realdata()Vivek Goyal1-0/+12
Add an helper to retrieve real data inode associated with overlay inode. This helper will ignore all metacopy inodes and will return only the real inode which has data. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Store lower data inode in ovl_inodeVivek Goyal1-1/+11
Right now ovl_inode stores inode pointer for lower inode. This helps with quickly getting lower inode given overlay inode (ovl_inode_lower()). Now with metadata only copy-up, we can have metacopy inode in middle layer as well and inode containing data can be different from ->lower. I need to be able to open the real file in ovl_open_realfile() and for that I need to quickly find the lower data inode. Hence store lower data inode also in ovl_inode. Also provide an helper ovl_inode_lowerdata() to access this field. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Fix ovl_getattr() to get number of blocks from lowerVivek Goyal1-0/+16
If an inode has been copied up metadata only, then we need to query the number of blocks from lower and fill up the stat->st_blocks. We need to be careful about races where we are doing stat on one cpu and data copy up is taking place on other cpu. We want to return stat->st_blocks either from lower or stable upper and not something in between. Hence, ovl_has_upperdata() is called first to figure out whether block reporting will take place from lower or upper. We now support metacopy dentries in middle layer. That means number of blocks reporting needs to come from lowest data dentry and this could be different from lower dentry. Hence we end up making a separate vfs_getxattr() call for metacopy dentries to get number of blocks. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Add helper ovl_dentry_lowerdata() to get lower data dentryVivek Goyal1-0/+13
Now we have the notion of data dentry and metacopy dentry. ovl_dentry_lower() will return uppermost lower dentry, but it could be either data or metacopy dentry. Now we support metacopy dentries in lower layers so it is possible that lowerstack[0] is metacopy dentry while lowerstack[1] is actual data dentry. So add an helper which returns lowest most dentry which is supposed to be data dentry. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Copy up meta inode data from lowest data inodeVivek Goyal1-0/+12
So far lower could not be a meta inode. So whenever it was time to copy up data of a meta inode, we could copy it up from top most lower dentry. But now lower itself can be a metacopy inode. That means data copy up needs to take place from a data inode in metacopy inode chain. Find lower data inode in the chain and use that for data copy up. Introduced a helper called ovl_path_lowerdata() to find the lower data inode chain. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Modify ovl_lookup() and friends to lookup metacopy dentryVivek Goyal1-0/+22
This patch modifies ovl_lookup() and friends to lookup metacopy dentries. It also allows for presence of metacopy dentries in lower layer. During lookup, check for presence of OVL_XATTR_METACOPY and if not present, set OVL_UPPERDATA bit in flags. We don't support metacopy feature with nfs_export. So in nfs_export code, we set OVL_UPPERDATA flag set unconditionally if upper inode exists. Do not follow metacopy origin if we find a metacopy only inode and metacopy feature is not enabled for that mount. Like redirect, this can have security implications where an attacker could hand craft upper and try to gain access to file on lower which it should not have to begin with. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: A new xattr OVL_XATTR_METACOPY for file on upperVivek Goyal1-4/+74
Now we will have the capability to have upper inodes which might be only metadata copy up and data is still on lower inode. So add a new xattr OVL_XATTR_METACOPY to distinguish between two cases. Presence of OVL_XATTR_METACOPY reflects that file has been copied up metadata only and and data will be copied up later from lower origin. So this xattr is set when a metadata copy takes place and cleared when data copy takes place. We also use a bit in ovl_inode->flags to cache OVL_UPPERDATA which reflects whether ovl inode has data or not (as opposed to metadata only copy up). If a file is copied up metadata only and later when same file is opened for WRITE, then data copy up takes place. We copy up data, remove METACOPY xattr and then set the UPPERDATA flag in ovl_inode->flags. While all these operations happen with oi->lock held, read side of oi->flags can be lockless. That is another thread on another cpu can check if UPPERDATA flag is set or not. So this gives us an ordering requirement w.r.t UPPERDATA flag. That is, if another cpu sees UPPERDATA flag set, then it should be guaranteed that effects of data copy up and remove xattr operations are also visible. For example. CPU1 CPU2 ovl_open() acquire(oi->lock) ovl_open_maybe_copy_up() ovl_copy_up_data() open_open_need_copy_up() vfs_removexattr() ovl_already_copied_up() ovl_dentry_needs_data_copy_up() ovl_set_flag(OVL_UPPERDATA) ovl_test_flag(OVL_UPPERDATA) release(oi->lock) Say CPU2 is copying up data and in the end sets UPPERDATA flag. But if CPU1 perceives the effects of setting UPPERDATA flag but not the effects of preceding operations (ex. upper that is not fully copied up), it will be a problem. Hence this patch introduces smp_wmb() on setting UPPERDATA flag operation and smp_rmb() on UPPERDATA flag test operation. May be some other lock or barrier is already covering it. But I am not sure what that is and is it obvious enough that we will not break it in future. So hence trying to be safe here and introducing barriers explicitly for UPPERDATA flag/bit. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-20ovl: Add helper ovl_already_copied_up()Vivek Goyal1-1/+25
There are couple of places where we need to know if file is already copied up (in lockless manner). Right now its open coded and there are only two conditions to check. Soon this patch series will introduce another condition to check and Amir wants to introduce one more. So introduce a helper instead to check this so that code is easier to read. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18ovl: copy up inode flagsMiklos Szeredi1-0/+1
On inode creation copy certain inode flags from the underlying real inode to the overlay inode. This is in preparation for moving overlay functionality out of the VFS. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18ovl: copy up timesMiklos Szeredi1-1/+9
Copy up mtime and ctime to overlay inode after times in real object are modified. Be careful not to dirty cachelines when not necessary. This is in preparation for moving overlay functionality out of the VFS. This patch shouldn't have any observable effect. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-04-12ovl: constant st_ino for non-samefs with xinoAmir Goldstein1-3/+14
On 64bit systems, when overlay layers are not all on the same fs, but all inode numbers of underlying fs are not using the high bits, use the high bits to partition the overlay st_ino address space. The high bits hold the fsid (upper fsid is 0). This way overlay inode numbers are unique and all inodes use overlay st_dev. Inode numbers are also persistent for a given layer configuration. Currently, our only indication for available high ino bits is from a filesystem that supports file handles and uses the default encode_fh() operation, which encodes a 32bit inode number. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-04-12ovl: allocate anon bdev per unique lower fsAmir Goldstein1-1/+6
Instead of allocating an anonymous bdev per lower layer, allocate one anonymous bdev per every unique lower fs that is different than upper fs. Every unique lower fs is assigned an fsid > 0 and the number of unique lower fs are stored in ofs->numlowerfs. The assigned fsid is stored in the lower layer struct and will be used also for inode number multiplexing. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-04-12ovl: factor out ovl_map_dev_ino() helperAmir Goldstein1-0/+7
A helper for ovl_getattr() to map the values of st_dev and st_ino according to constant st_ino rules. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-04-12ovl: set i_ino to the value of st_ino for NFS exportAmir Goldstein1-1/+7
Eddie Horng reported that readdir of an overlayfs directory that was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN. The reason is that while preparing the response for readdirplus, nfsd checks inside encode_entryplus_baggage() that a child dentry's inode number matches the value of d_ino returns by overlayfs readdir iterator. Because the overlayfs inodes use arbitrary inode numbers that are not correlated with the values of st_ino/d_ino, NFSv3 falls back to not encoding d_type. Although this is an allowed behavior, we can fix it for the case of all overlayfs layers on the same underlying filesystem. When NFS export is enabled and d_ino is consistent with st_ino (samefs), set the same value also to i_ino in ovl_fill_inode() for all overlayfs inodes, nfsd readdirplus sanity checks will pass. ovl_fill_inode() may be called from ovl_new_inode(), before real inode was created with ino arg 0. In that case, i_ino will be updated to real upper inode i_ino on ovl_inode_init() or ovl_inode_update(). Reported-by: Eddie Horng <eddiehorng.tw@gmail.com> Tested-by: Eddie Horng <eddiehorng.tw@gmail.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Fixes: 8383f1748829 ("ovl: wire up NFS export operations") Cc: <stable@vger.kernel.org> #v4.16 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: store 'has_upper' and 'opaque' as bit flagsAmir Goldstein1-11/+19
We need to make some room in struct ovl_entry to store information about redirected ancestors for NFS export, so cram two booleans as bit flags. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: copy up of disconnected dentriesAmir Goldstein1-3/+4
With NFS export, some operations on decoded file handles (e.g. open, link, setattr, xattr_set) may call copy up with a disconnected non-dir. In this case, we will copy up lower inode to index dir without linking it to upper dir. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: whiteout index when union nlink drops to zeroAmir Goldstein1-6/+11
With NFS export feature enabled, when overlay inode nlink drops to zero, instead of removing the index entry, replace it with a whiteout index entry. This is needed for NFS export in order to prevent future open by handle from opening the lower file directly. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: cleanup dir index when dir nlink drops to zeroAmir Goldstein1-3/+3
When non-dir index union nlink drops to zero the non-dir index is cleaned. Do the same for directory type index entries when union directory is removed. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: index directories on copy up for NFS exportAmir Goldstein1-1/+1
With the NFS export feature enabled, all dirs are indexed on copy up. Non-dir files are copied up directly to indexdir and then hardlinked to upper dir. Directories are copied up to indexdir, then an index entry is created in indexdir with 'upper' xattr pointing to the copied up dir and then the copied up dir is moved to upper dir. Directory index is also used for consistency verification, like detecting multiple redirected dirs to the same lower dir on lookup. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: index all non-dir on copy up for NFS exportAmir Goldstein1-0/+4
With the NFS export feature enabled, all non-dir are indexed on copy up. The copy up origin inode of an indexed non-dir can be used as a unique identifier of the overlay object. The full index is also used for consistency verfication, like detecting multiple non-hardlink uppers with the same 'origin' on lookup. Directory index on copy up will be implemented by following patch. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: create ovl_need_index() helperAmir Goldstein1-4/+20
The helper determines which lower file needs to be indexed on copy up and before nlink changes. For index=on, the helper evaluates to true for lower hardlinks. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-24ovl: add support for "nfs_export" configurationAmir Goldstein1-0/+16
Introduce the "nfs_export" config, module and mount options. The NFS export feature depends on the "index" feature and enables two implicit overlayfs features: "index_all" and "verify_lower". The "index_all" feature creates an index on copy up of every file and directory. The "verify_lower" feature uses the full index to detect overlay filesystems inconsistencies on lookup, like redirect from multiple upper dirs to the same lower dir. NFS export can be enabled for non-upper mount with no index. However, because lower layer redirects cannot be verified with the index, enabling NFS export support on an overlay with no upper layer requires turning off redirect follow (e.g. "redirect_dir=nofollow"). The full index may incur some overhead on mount time, especially when verifying that lower directory file handles are not stale. NFS export support, full index and consistency verification will be implemented by following patches. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-19ovl: hash directory inodes for fsnotifyAmir Goldstein1-2/+2
fsnotify pins a watched directory inode in cache, but if directory dentry is released, new lookup will allocate a new dentry and a new inode. Directory events will be notified on the new inode, while fsnotify listener is watching the old pinned inode. Hash all directory inodes to reuse the pinned inode on lookup. Pure upper dirs are hashes by real upper inode, merge and lower dirs are hashed by real lower inode. The reference to lower inode was being held by the lower dentry object in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry may drop lower inode refcount to zero. Add a refcount on behalf of the overlay inode to prevent that. As a by-product, hashing directory inodes also detects multiple redirected dirs to the same lower dir and uncovered redirected dir target on and returns -ESTALE on lookup. The reported issue dates back to initial version of overlayfs, but this patch depends on ovl_inode code that was introduced in kernel v4.13. Cc: <stable@vger.kernel.org> #v4.13 Reported-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com>
2017-11-09ovl: re-structure overlay lower layers in-memoryChandan Rajendra1-1/+6
Define new structures to represent overlay instance lower layers and overlay merge dir lower layers to make room for storing more per layer information in-memory. Instead of keeping the fs instance lower layers in an array of struct vfsmount, keep them in an array of new struct ovl_layer, that has a pointer to struct vfsmount. Instead of keeping the dentry lower layers in an array of struct path, keep them in an array of new struct ovl_path, that has a pointer to struct dentry and to struct ovl_layer. Add a small helper to find the fs layer id that correspopnds to a lower struct ovl_path and use it in ovl_lookup(). [amir: split re-structure from anonymous bdev patch] Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-09ovl: move include of ovl_entry.h into overlayfs.hAmir Goldstein1-1/+0
Most overlayfs c files already explicitly include ovl_entry.h to use overlay entry struct definitions and upcoming changes are going to require even more c files to include this header. All overlayfs c files include overlayfs.h and overlayfs.h itself refers to some structs defined in ovl_entry.h, so it seems more logic to include ovl_entry.h from overlayfs.h than from c files. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-09ovl: no direct iteration for dir with origin xattrAmir Goldstein1-0/+13
If a non-merge dir in an overlay mount has an overlay.origin xattr, it means it was once an upper merge dir, which may contain whiteouts and then the lower dir was removed under it. Do not iterate real dir directly in this case to avoid exposing whiteouts. [SzM] Set OVL_WHITEOUT for all merge directories as well. [amir] A directory that was just copied up does not have the OVL_WHITEOUTS flag. We need to set it to fix merge dir iteration. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-10-05ovl: fix missing unlock_rename() in ovl_do_copy_up()Amir Goldstein1-0/+19
Use the ovl_lock_rename_workdir() helper which requires unlock_rename() only on lock success. Fixes: ("fd210b7d67ee ovl: move copy up lock out") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-10-05ovl: fix dput() of ERR_PTR in ovl_cleanup_index()Amir Goldstein1-1/+4
Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-27ovl: constant d_ino for non-merge dirsMiklos Szeredi1-6/+18
Impure directories are ones which contain objects with origins (i.e. those that have been copied up). These are relevant to readdir operation only because of the d_ino field, no other transformation is necessary. Also a directory can become impure between two getdents(2) calls. This patch creates a cache for impure directories. Unlike the cache for merged directories, this one only contains entries with origin and is not refcounted but has a its lifetime tied to that of the dentry. Similarly to the merged cache, the impure cache is invalidated based on a version number. This version number is incremented when an entry with origin is added or removed from the directory. If the cache is empty, then the impure xattr is removed from the directory. This patch also fixes up handling of d_ino for the ".." entry if the parent directory is merged. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-20ovl: fix xattr get and set with selinuxMiklos Szeredi1-1/+6
inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr to get security label, and ovl_xattr_get() calls ovl_dentry_real(), which depends on dentry->d_inode, but d_inode is null and not initialized yet at this point resulting in an Oops. Fix by getting the upperdentry info from the inode directly in this case. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: 09d8b586731b ("ovl: move __upperdentry to ovl_inode") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: cleanup orphan index entriesAmir Goldstein1-1/+65
index entry should live only as long as there are upper or lower hardlinks. Cleanup orphan index entries on mount and when dropping the last overlay inode nlink. When about to cleanup or link up to orphan index and the index inode nlink > 1, admit that something went wrong and adjust overlay nlink to index inode nlink - 1 to prevent it from dropping below zero. This could happen when adding lower hardlinks underneath a mounted overlay and then trying to unlink them. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: persistent overlay inode nlink for indexed inodesAmir Goldstein1-0/+66
With inodes index enabled, an overlay inode nlink counts the union of upper and non-covered lower hardlinks. During the lifetime of a non-pure upper inode, the following nlink modifying operations can happen: 1. Lower hardlink copy up 2. Upper hardlink created, unlinked or renamed over 3. Lower hardlink whiteout or renamed over For the first, copy up case, the union nlink does not change, whether the operation succeeds or fails, but the upper inode nlink may change. Therefore, before copy up, we store the union nlink value relative to the lower inode nlink in the index inode xattr trusted.overlay.nlink. For the second, upper hardlink case, the union nlink should be incremented or decremented IFF the operation succeeds, aligned with nlink change of the upper inode. Therefore, before link/unlink/rename, we store the union nlink value relative to the upper inode nlink in the index inode. For the last, lower cover up case, we simplify things by preceding the whiteout or cover up with copy up. This makes sure that there is an index upper inode where the nlink xattr can be stored before the copied up upper entry is unlink. Return the overlay inode nlinks for indexed upper inodes on stat(2). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: implement index dir copy upAmir Goldstein1-1/+1
Implement a copy up method for non-dir objects using index dir to prevent breaking lower hardlinks on copy up. This method requires that the inodes index dir feature was enabled and that all underlying fs support file handle encoding/decoding. On the first lower hardlink copy up, upper file is created in index dir, named after the hex representation of the lower origin inode file handle. On the second lower hardlink copy up, upper file is found in index dir, by the same lower handle key. On either case, the upper indexed inode is then linked to the copy up upper path. The index entry remains linked for future lower hardlink copy up and for lower to upper inode map, that is needed for exporting overlayfs to NFS. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: add flag for upper in ovl_entryMiklos Szeredi1-0/+19
For rename, we need to ensure that an upper alias exists for hard links before attempting the operation. Introduce a flag in ovl_entry to track the state of the upper alias. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: defer upper dir lock to tempfile linkAmir Goldstein1-1/+0
On copy up of regular file using an O_TMPFILE, lock upper dir only before linking the tempfile in place. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: hash overlay non-dir inodes by copy up originMiklos Szeredi1-2/+1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: introduce the inodes index dir featureAmir Goldstein1-0/+15
Create the index dir on mount. The index dir will contain hardlinks to upper inodes, named after the hex representation of their origin lower inodes. The index dir is going to be used to prevent breaking lower hardlinks on copy up and to implement overlayfs NFS export. Because the feature is not fully backward compat, enabling the feature is opt-in by config/module/mount option. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04vfs: introduce inode 'inuse' lockAmir Goldstein1-0/+31
Added an i_state flag I_INUSE and helpers to set/clear/test the bit. The 'inuse' lock is an 'advisory' inode lock, that can be used to extend exclusive create protection beyond parent->i_mutex lock among cooperating users. This is going to be used by overlayfs to get exclusive ownership on upper and work dirs among overlayfs mounts. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: move cache and version to ovl_inodeMiklos Szeredi1-12/+8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: use ovl_inode mutex to synchronize concurrent copy upAmir Goldstein1-17/+6
Use the new ovl_inode mutex to synchonize concurrent copy up instead of the super block copy up workqueue. Moving the synchronization object from the overlay dentry to the overlay inode is needed for synchonizing concurrent copy up of lower hardlinks to the same upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: move impure to ovl_inodeMiklos Szeredi1-10/+12
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04ovl: move redirect to ovl_inodeMiklos Szeredi1-6/+4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>