summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2
AgeCommit message (Collapse)AuthorFilesLines
2006-03-24[PATCH] ocfs2: dlm recovery fixesKurt Hackel4-19/+142
when starting lock mastery (excepting the recovery lock) wait on any nodes needing recovery. fix one instance where lock resources were left attached to the recovery list after recovery completed. ensure that the node_down code is run uniformly regardless of which node found the dead node first. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-24[PATCH] ocfs2: fix hang in dlm lock resource masteryKurt Hackel1-32/+92
fixes hangs in lock mastery related to refcounting on the mle structure Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-24ocfs2: use __attribute__ formatMark Fasheh1-2/+6
Use the "format" attribute on ocfs2_error() and ocfs2_abort() so that the compiler will warn when we get calls to those functions wrong. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-24[PATCH] cpuset memory spread: slab cache formatPaul Jackson2-4/+7
Rewrap the overly long source code lines resulting from the previous patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch contains only formatting changes, and no function change. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] cpuset memory spread: slab cache filesystemsPaul Jackson2-2/+2
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD memory spreading. If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's in a cpuset with the 'memory_spread_slab' option enabled goes to allocate from such a slab cache, the allocations are spread evenly over all the memory nodes (task->mems_allowed) allowed to that task, instead of favoring allocation on the node local to the current cpu. The following inode and similar caches are marked SLAB_MEM_SPREAD: file cache ==== ===== fs/adfs/super.c adfs_inode_cache fs/affs/super.c affs_inode_cache fs/befs/linuxvfs.c befs_inode_cache fs/bfs/inode.c bfs_inode_cache fs/block_dev.c bdev_cache fs/cifs/cifsfs.c cifs_inode_cache fs/coda/inode.c coda_inode_cache fs/dquot.c dquot fs/efs/super.c efs_inode_cache fs/ext2/super.c ext2_inode_cache fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr fs/ext3/super.c ext3_inode_cache fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr fs/fat/cache.c fat_cache fs/fat/inode.c fat_inode_cache fs/freevxfs/vxfs_super.c vxfs_inode fs/hpfs/super.c hpfs_inode_cache fs/isofs/inode.c isofs_inode_cache fs/jffs/inode-v23.c jffs_fm fs/jffs2/super.c jffs2_i fs/jfs/super.c jfs_ip fs/minix/inode.c minix_inode_cache fs/ncpfs/inode.c ncp_inode_cache fs/nfs/direct.c nfs_direct_cache fs/nfs/inode.c nfs_inode_cache fs/ntfs/super.c ntfs_big_inode_cache_name fs/ntfs/super.c ntfs_inode_cache fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache fs/ocfs2/super.c ocfs2_inode_cache fs/proc/inode.c proc_inode_cache fs/qnx4/inode.c qnx4_inode_cache fs/reiserfs/super.c reiser_inode_cache fs/romfs/inode.c romfs_inode_cache fs/smbfs/inode.c smb_inode_cache fs/sysv/inode.c sysv_inode_cache fs/udf/super.c udf_inode_cache fs/ufs/super.c ufs_inode_cache net/socket.c sock_inode_cache net/sunrpc/rpc_pipe.c rpc_inode_cache The choice of which slab caches to so mark was quite simple. I marked those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache, inode_cache, and buffer_head, which were marked in a previous patch. Even though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same potentially large file system i/o related slab caches as we need for memory spreading. Given that the rule now becomes "wherever you would have used a SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain. Future file system writers will just copy one of the existing file system slab cache setups and tend to get it right without thinking. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] slab: Remove SLAB_NO_REAP optionChristoph Lameter1-1/+1
SLAB_NO_REAP is documented as an option that will cause this slab not to be reaped under memory pressure. However, that is not what happens. The only thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused slab elements that were allocated in batch in cache_reap(). Cache_reap() is run every few seconds independently of memory pressure. Could we remove the whole thing? Its only used by three slabs anyways and I cannot find a reason for having this option. There is an additional problem with SLAB_NO_REAP. If set then the recovery of objects from alien caches is switched off. Objects not freed on the same node where they were initially allocated will only be reused if a certain amount of objects accumulates from one alien node (not very likely) or if the cache is explicitly shrunk. (Strangely __cache_shrink does not check for SLAB_NO_REAP) Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-01[PATCH] ocfs2: use hlists for lockres hashMark Fasheh5-45/+41
Switch from list_head to hlist_head. Make the size of the hash dependent upon the allocated area, rather than a constant. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: added source addr to bind() in o2net_start_connect()Sunil Mushran1-2/+12
to prevent confusion when a virtual ip is created on the same interface Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01ocfs2: Respond to on-disk corruption in the extent map code.Joel Becker1-2/+36
The extent map code has long noticed when the on-disk extent information is corrupt. However, so far it has only returned an error. We should take the filesystem read-only, as it is corrupt. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01ocfs2: Set .owner on masklog sysfs attributes.Joel Becker1-0/+1
Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: fix orphan recovery deadlockMark Fasheh5-32/+154
Orphan dir recovery can deadlock with another process in ocfs2_delete_inode() in some corner cases. Fix this by tracking recovery state more closely and allowing it to handle inode wipes which might deadlock. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: complete failure recovery for nodemanager initJeff Mahoney1-1/+3
This patch finishes cleaning up the node manager allocations if it fails to initialize. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: remove non existing function prototypesMark Fasheh1-5/+0
Remove some prototypes from tcp.h for functions which have long been gone. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: remove unused codeMark Fasheh2-53/+1
Remove some #ifdef'd out code which was inadvertantly introduced in our initial merge. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: remove pointless max journal size limitMark Fasheh1-1/+0
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01[PATCH] ocfs2: fix -Wformat warnings when building UML on x86-64Jeff Mahoney1-1/+1
The check to determine which format string is appopriate for u64 and friends works in most cases, but UML on x86_64 doesn't define CONFIG_X86_64, so it results in screen fulls of compile-time warnings. This patch fixes it to handle that case. fs/ocfs2/cluster/masklog.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: detach from heartbeat events before freeing mleKurt Hackel1-1/+6
Signed-off-by: Kurt Hackel <Kurt.Hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: only checkpoint journal when asked toMark Fasheh2-6/+3
Disable automatic checkpointing of the journal - this is a relic from older ocfs2 days. Worth quite a bit of performance on longer running single node tests. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: manually grant remote recovery lockKurt Hackel1-0/+11
* fix a hang in recovery that occurred in dlmlock_remote. the $RECOVERY lock was never moved to the granted queue even after getting DLM_NORMAL back from the master node. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: add dlm_wait_for_node_deathKurt Hackel4-1/+40
* add dlm_wait_for_node_death function to be used after receiving a network error. this will wait for the given timeout to allow the heartbeat callbacks to update the domain map. without this, some paths may spin and consume enough cpu that the heartbeat gets starved and never updates. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: fix release of ast never reservedKurt Hackel1-3/+4
* fix a bug in dlm_convert_lock_handler where dlm_lockres_release_ast was being called even if no ast was ever reserved Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: recheck recovery state after getting lockKurt Hackel1-0/+24
* after successfully taking the $RECOVERY lock in EX mode, recheck to make sure that recovery has not already begun or completed on another node Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] ocfs2: don't wait on recovery when locking journalMark Fasheh1-1/+5
The mount path had incorrectly asked the locking code to wait for recovery completion, which deadlocks things because recovery waits for mount to complete first. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] ocfs2: fix compile warningsMark Fasheh3-13/+18
Fix a couple of compile warnings found when compiling on a ppc64 build box. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] BUG_ON() Conversion in fs/ocfs2/Eric Sesterhenn / snakebyte4-20/+11
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] fs/ocfs2/dlm/dlmrecovery.c must #include <linux/delay.h>Adrian Bunk1-0/+1
fs/ocfs2/dlm/dlmrecovery.c does now use msleep(), and does therefore need to #include <linux/delay.h> for getting the prototype of this function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] ocfs2: Semaphore to mutex conversion.Arjan van de Ven3-9/+10
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] ocfs2/dlm: fixesKurt Hackel5-49/+256
* fix a hang which can occur during shutdown migration * do not allow nodes to join during recovery * when restarting lock mastery, do not ignore nodes which come up * more than one node could become recovery master, fix this * sleep to allow some time for heartbeat state to catch up to network * extra debug info for bad recovery state problems * make DLM_RECO_NODE_DATA_DONE a valid state for non-master recovery nodes * prune all locks from dead nodes on $RECOVERY lock resources * do NOT automatically add new nodes to mle nodemaps until they have properly joined the domain * make sure dlm_pick_recovery_master only exits when all nodes have synced * properly handle dlmunlock errors in dlm_pick_recovery_master * do not propagate network errors in dlm_send_begin_reco_message * dead nodes were not being put in the recovery map sometimes, fix this * dlmunlock was failing to clear the unlock actions on DLM_DENIED Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[OCFS2] Make ip_io_sem a mutexMark Fasheh6-18/+18
ip_io_sem is now ip_io_mutex. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] ocfs2/dlm: fix compilation on ia64Jeff Mahoney1-1/+1
Including <asm/signal.h> results in compilation failure on ia64 due to not including <linux/compiler.h> Including <linux/signal.h> corrects the problem. Please apply. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] OCFS2: __init / __exit problemAdrian Bunk3-3/+3
Functions called by __init funtions mustn't be __exit. Reported by Jan-Benedict Glaw <jbglaw@lug-owl.de>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-01-11[PATCH] capable/capability.h (fs/)Randy Dunlap1-0/+1
fs: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] replace inode_update_time with file_update_timeChristoph Hellwig1-6/+2
To allow various options to work per-mount instead of per-sb we need a struct vfsmount when updating ctime and mtime. This preparation patch replaces the inode_update_time routine with a file_update_atime routine so we can easily get at the vfsmount. (and the file makes more sense in this context anyway). Also get rid of the unused second argument - we always want to update the ctime when calling this routine. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] mutex subsystem, semaphore to mutex: VFS, sb->s_lockIngo Molnar1-1/+1
This patch converts the superblock-lock semaphore to a mutex, affecting lock_super()/unlock_super(). Tested on ext3 and XFS. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09[PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_semJes Sorensen7-35/+35
This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-08[PATCH] remove gcc-2 checksAndrew Morton1-4/+3
Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-03[PATCH] This patch contains the following cleanups:Adrian Bunk3-8/+3
- cluster/sys.c: make needlessly global code static - dlm/: "extern" declarations for variables belong into header files (and in this case, they are already in dlmdomain.h) Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemMark Fasheh52-0/+24438
The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemMark Fasheh6-1/+1485
dlmfs: A minimal dlm userspace interface implemented via a virtual file system. Most of the OCFS2 tools make use of this to take cluster locks when doing operations on the file system. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemKurt Hackel17-0/+10830
A distributed lock manager built with the cluster file system use case in mind. The OCFS2 dlm exposes a VMS style API, though things have been simplified internally. The only lock levels implemented currently are NLMODE, PRMODE and EXMODE. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemZach Brown7-0/+2624
Node messaging via tcp. Used by the dlm and the file system for point to point communication between nodes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemMark Fasheh3-0/+1916
Disk based heartbeat. Configured and started from userspace, the kernel component handles I/O submission and event generation via callback mechanism. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemKurt Hackel7-0/+1001
A simple node information service, filled and updated from userspace. The rest of the stack queries this service for simple node information. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemZach Brown2-0/+441
Very simple printk wrapper which adds the ability to enable various sets of debug messages at run-time. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>