summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/dlmglue.h
AgeCommit message (Collapse)AuthorFilesLines
2014-04-03ocfs2: avoid blocking in ocfs2_mark_lockres_freeing() in downconvert threadJan Kara1-1/+2
If we are dropping last inode reference from downconvert thread, we will end up calling ocfs2_mark_lockres_freeing() which can block if the lock we are freeing is queued thus creating an A-A deadlock. Luckily, since we are the downconvert thread, we can immediately dequeue the lock and thus avoid waiting in this case. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-10ocfs2: Fix lockdep warning in reflink.Tao Ma1-0/+1
This patch change mutex_lock to a new subclass and add a new inode lock subclass for the target inode which caused this lockdep warning. ============================================= [ INFO: possible recursive locking detected ] 2.6.35+ #5 --------------------------------------------- reflink/11086 is trying to acquire lock: (Meta){+++++.}, at: [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2] but task is already holding lock: (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2] other info that might help us debug this: 6 locks held by reflink/11086: #0: (&sb->s_type->i_mutex_key#15/1){+.+.+.}, at: [<ffffffff820e09ec>] lookup_create+0x26/0x97 #1: (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa06f99a0>] ocfs2_reflink_ioctl+0x4d3/0x1229 [ocfs2] #2: (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2] #3: (&oi->ip_xattr_sem){+.+.+.}, at: [<ffffffffa06f9b58>] ocfs2_reflink_ioctl+0x68b/0x1229 [ocfs2] #4: (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa06f9b67>] ocfs2_reflink_ioctl+0x69a/0x1229 [ocfs2] #5: (&sb->s_type->i_mutex_key#15/2){+.+...}, at: [<ffffffffa06f9d4f>] ocfs2_reflink_ioctl+0x882/0x1229 [ocfs2] stack backtrace: Pid: 11086, comm: reflink Not tainted 2.6.35+ #5 Call Trace: [<ffffffff82063dd9>] validate_chain+0x56e/0xd68 [<ffffffff82062275>] ? mark_held_locks+0x49/0x69 [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1 [<ffffffff82065a81>] lock_acquire+0xc6/0xed [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2] [<ffffffffa06c9ade>] __ocfs2_cluster_lock+0x975/0xa0d [ocfs2] [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2] [<ffffffffa06e107b>] ? ocfs2_wait_for_recovery+0x15/0x8a [ocfs2] [<ffffffffa06cb6ea>] ocfs2_inode_lock_full_nested+0x1ac/0xdc5 [ocfs2] [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2] [<ffffffff820623a0>] ? trace_hardirqs_on_caller+0x10b/0x12f [<ffffffff82060193>] ? debug_mutex_free_waiter+0x4f/0x53 [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2] [<ffffffffa06ce24a>] ? ocfs2_file_lock_res_init+0x66/0x78 [ocfs2] [<ffffffff820bb2d2>] ? might_fault+0x40/0x8d [<ffffffffa06df9f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2] [<ffffffff820ee5d3>] ? mntput_no_expire+0x1d/0xb0 [<ffffffff820e07b3>] ? path_put+0x2c/0x31 [<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d [<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae [<ffffffff8233a7f6>] ? _raw_spin_unlock+0x26/0x2a [<ffffffff8200299c>] ? sysret_check+0x27/0x62 [<ffffffff820e59ab>] sys_ioctl+0x57/0x7a [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-22ocfs2: Add new refcount tree lock resource in dlmglue.Tao Ma1-0/+6
refcount tree lock resource is used to protect refcount tree read/write among multiple nodes. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-06-22ocfs2: Add lockdep annotationsJan Kara1-3/+17
Add lockdep support to OCFS2. The support also covers all of the cluster locks except for open locks, journal locks, and local quotafile locks. These are special because they are acquired for a node, not for a particular process and lockdep cannot deal with such type of locking. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-06-22ocfs2: Disable orphan scanning for local and hard-ro mountsSunil Mushran1-2/+2
Local and Hard-RO mounts do not need orphan scanning. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-06-03ocfs2: timer to queue scan of all orphan slotsSrinivas Eeda1-0/+11
When a dentry is unlinked, the unlinking node takes an EX on the dentry lock before moving the dentry to the orphan directory. Other nodes that have this dentry in cache have a PR on the same dentry lock. When the EX is requested, the other nodes flag the corresponding inode as MAYBE_ORPHANED during downconvert. The inode is finally deleted when the last node to iput the inode sees that i_nlink==0 and the MAYBE_ORPHANED flag is set. A problem arises if a node is forced to free dentry locks because of memory pressure. If this happens, the node will no longer get downconvert notifications for the dentries that have been unlinked on another node. If it also happens that node is actively using the corresponding inode and happens to be the one performing the last iput on that inode, it will fail to delete the inode as it will not have the MAYBE_ORPHANED flag set. This patch fixes this shortcoming by introducing a periodic scan of the orphan directories to delete such inodes. Care has been taken to distribute the workload across the cluster so that no one node has to perform the task all the time. Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-04-03ocfs2: fix rare stale inode errors when exporting via nfswengang wang1-0/+2
For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Implementation of local and global quota file handlingJan Kara1-0/+19
For each quota type each node has local quota file. In this file it stores changes users have made to disk usage via this node. Once in a while this information is synced to global file (and thus with other nodes) so that limits enforcement at least aproximately works. Global quota files contain all the information about usage and limits. It's mostly handled by the generic VFS code (which implements a trie of structures inside a quota file). We only have to provide functions to convert structures from on-disk format to in-memory one. We also have to provide wrappers for various quota functions starting transactions and acquiring necessary cluster locks before the actual IO is really started. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Break out stackglue into modules.Joel Becker1-1/+1
We define the ocfs2_stack_plugin structure to represent a stack driver. The o2cb stack code is split into stack_o2cb.c. This becomes the ocfs2_stack_o2cb.ko module. The stackglue generic functions are similarly split into the ocfs2_stackglue.ko module. This module now provides an interface to register drivers. The ocfs2_stack_o2cb driver registers itself. As part of this interface, ocfs2_stackglue can load drivers on demand. This is accomplished in ocfs2_cluster_connect(). ocfs2_cluster_disconnect() is now notified when a _hangup() is pending. If a hangup is pending, it will not release the driver module and will let _hangup() do that. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-04-18ocfs2: Clean up stackglue initializationJoel Becker1-3/+2
The stack glue initialization function needs a better name so that it can be used cleanly when stackglue becomes a module. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Introduce the new ocfs2_cluster_connect/disconnect() API.Joel Becker1-1/+0
This step introduces a cluster stack agnostic API for initializing and exiting. fs/ocfs2/dlmglue.c no longer uses o2cb/o2dlm knowledge to connect to the stack. It is all handled in stackglue.c. heartbeat.c no longer needs to know how it gets called. ocfs2_do_node_down() is now a clean recovery trigger. The big gotcha is the ordering of initializations and de-initializations done underneath ocfs2_cluster_connect(). ocfs2_dlm_init() used to do all o2dlm initialization in one block. Thus, the o2dlm functionality of ocfs2_cluster_connect() is very straightforward. ocfs2_dlm_shutdown(), however, did a few things between de-registration of the eviction callback and actually shutting down the domain. Now de-registration and shutdown of the domain are wrapped within the single ocfs2_cluster_disconnect() call. I've checked the code paths to make sure we can safely tear down things in ocfs2_dlm_shutdown() before calling ocfs2_cluster_disconnect(). The filesystem has already set itself to ignore the callback. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Separate out dlm lock functions.Joel Becker1-0/+3
This is the first in a series of patches to isolate ocfs2 from the underlying cluster stack. Here we wrap the dlm locking functions with ocfs2-specific calls. Because ocfs2 always uses the same dlm lock status callbacks, we can eliminate the callbacks from the filesystem visible functions. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-03-03[2.6 patch] fs/ocfs2/: possible cleanupsAdrian Bunk1-2/+0
This patch contains the following cleanups that are now possible: - make the following needlessly global functions static: - dlmglue.c:ocfs2_process_blocked_lock() - heartbeat.c:ocfs2_node_map_init() - #if 0 the following unused global function plus support functions: - heartbeat.c:ocfs2_node_map_is_only() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-02-06ocfs2: Negotiate locking protocol versions.Joel Becker1-0/+1
Currently, when ocfs2 nodes connect via TCP, they advertise their compatibility level. If the versions do not match, two nodes cannot speak to each other and they disconnect. As a result, this provides no forward or backwards compatibility. This patch implements a simple protocol negotiation at the dlm level by introducing a major/minor version number scheme for entities that communicate. Specifically, o2dlm has a major/minor version for interaction with o2dlm on other nodes, and ocfs2 itself has a major/minor version for interacting with the filesystem on other nodes. This will allow rolling upgrades of ocfs2 clusters when changes to the locking or network protocols can be done in a backwards compatible manner. In those cases, only the minor number is changed and the negotatied protocol minor is returned from dlm join. In the far less likely event that a required protocol change makes backwards compatibility impossible, we simply bump the major number. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25[PATCH 1/2] ocfs2: add flock lock typeMark Fasheh1-0/+5
This adds a new dlmglue lock type which is intended to back flock() requests. Since these locks are driven from userspace, usage rules are much more liberal than the typical Ocfs2 internal cluster lock. As a result, we can't make use of most dlmglue features - lock caching and lock level optimizations in particular. Additionally, userspace is free to deadlock itself, so we have to deal with that in the same way as the rest of the kernel - by allowing a signal to abort a lock request. In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock() does it's own dlm coordination. We still use the same helper functions though, so duplicated code is kept to a minimum. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Rename ocfs2_meta_[un]lockMark Fasheh1-6/+6
Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Remove data locksMark Fasheh1-10/+1
The meta lock now covers both meta data and data, so this just removes the now-redundant data lock. Combining locks saves us a round of lock mastery per inode and one less lock to ping between nodes during read/write. We don't lose much - since meta locks were always held before a data lock (and at the same level) ordered writeout mode (the default) ensured that flushing for the meta data lock also pushed out data anyways. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25ocfs2: Remove mount/unmount votesMark Fasheh1-2/+3
The node maps that are set/unset by these votes are no longer relevant, thus we can remove the mount and umount votes. Since those are the last two remaining votes, we can also remove the entire vote infrastructure. The vote thread has been renamed to the downconvert thread, and the small amount of functionality related to managing it has been moved into fs/ocfs2/dlmglue.c. All references to votes have been removed or updated. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-12ocfs2: Structure updates for inline dataMark Fasheh1-2/+2
Add the disk, network and memory structures needed to support data in inode. Struct ocfs2_inline_data is defined and embedded in ocfs2_dinode for storing inline data. A new inode field, i_dyn_features, is added to facilitate tracking of dynamic inode state. Since it will be used often, we want to mirror it on ocfs2_inode_info, and transfer it via the meta data lvb. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-05-02[PATCH] fs/ocfs2/: make 3 functions staticAdrian Bunk1-7/+0
This patch makes the following needlessly global functions static: - aops.c: ocfs2_write_data_page() - dlmglue.c: ocfs2_dump_meta_lvb_info() - file.c: ocfs2_set_inode_size() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: Remove delete inode voteTiger Yang1-0/+3
Ocfs2 currently does cluster-wide node messaging to check the open state of an inode during delete. This patch removes that mechanism in favor of an inode cluster lock which is taken at shared read when an inode is first read and dropped in clear_inode(). This allows a deleting node to test the liveness of an inode by attempting to take an exclusive lock. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01ocfs2: core atime update functionsTiger Yang1-0/+3
This patch adds the core routines for updating atime in ocfs2. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01ocfs2: remove unused handle argument from ocfs2_meta_lock_full()Mark Fasheh1-3/+1
Now that this is unused and all callers pass NULL, we can safely remove it. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01[2.6 patch] make ocfs2_create_new_lock() staticAdrian Bunk1-2/+0
This patch makes the needlessly global ocfs2_create_new_lock() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Remove i_generation from inode lock namesMark Fasheh1-3/+4
OCFS2 puts inode meta data in the "lock value block" provided by the DLM. Typically, i_generation is encoded in the lock name so that a deleted inode on and a new one in the same block don't share the same lvb. Unfortunately, that scheme means that the read in ocfs2_read_locked_inode() is potentially thrown away as soon as the meta data lock is taken - we cannot encode the lock name without first knowing i_generation, which requires a disk read. This patch encodes i_generation in the inode meta data lvb, and removes the value from the inode meta data lock name. This way, the read can be covered by a lock, and at the same time we can distinguish between an up to date and a stale LVB. This will help cold-cache stat(2) performance in particular. Since this patch changes the protocol version, we take the opportunity to do a minor re-organization of two of the LVB fields. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Encode i_generation in the meta data lvbMark Fasheh1-2/+3
When i_generation is removed from the lockname, this will help us determine whether a meta data lvb has information that is in sync with the local struct inode. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Free up some space in the lvbMark Fasheh1-1/+3
lvb_version doesn't need to be a whole 32 bits. Make it an 8 bit field to free up some space. This should be backwards compatible until we use one of the fields, in which case we'd bump the lvb version anyway. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Add new cluster lock typeMark Fasheh1-0/+11
Replace the dentry vote mechanism with a cluster lock which covers a set of dentries. This allows us to force d_delete() only on nodes which actually care about an unlink. Every node that does a ->lookup() gets a read only lock on the dentry, until an unlink during which the unlinking node, will request an exclusive lock, forcing the other nodes who care about that dentry to d_delete() it. The effect is that we retain a very lightweight ->d_revalidate(), and at the same time get to make large improvements to the average case performance of the ocfs2 unlink and rename operations. This patch adds the cluster lock type which OCFS2 can attach to dentries. A small number of fs/ocfs2/dcache.c functions are stubbed out so that this change can compile. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-20ocfs2: add ext2 attributesHerbert Poetzl1-2/+3
Support immutable, and other attributes. Some renaming and other minor fixes done by myself. Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemMark Fasheh1-0/+111
The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>