summaryrefslogtreecommitdiffstats
path: root/fs/ntfs
AgeCommit message (Collapse)AuthorFilesLines
2018-08-17ntfs: mft: remove VLA usageKees Cook1-2/+10
In the quest to remove all stack VLA usage from the kernel[1], this allocates the maximum size stack buffer. Existing checks already require that blocksize >= NTFS_BLOCK_SIZE and mft_record_size <= PAGE_SIZE, so max_bhs can be at most PAGE_SIZE / NTFS_BLOCK_SIZE. Sanity checks are added for robustness. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Link: http://lkml.kernel.org/r/20180626172909.41453-4-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17ntfs: decompress: remove VLA usageKees Cook1-12/+16
In the quest to remove all stack VLA usage from the kernel[1], this moves the stack buffer used during decompression to be allocated externally. The existing "dest_max_index" used in the VLA is bounded by cb_max_page. cb_max_page is bounded by max_page, and max_page is bounded by nr_pages. Since nr_pages is used for the "pages" allocation, it can similarly be used for the "completed_pages" allocation and passed into the decompression function. The error paths are updated to free the new allocation. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Link: http://lkml.kernel.org/r/20180626172909.41453-3-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17ntfs: aops: remove VLA usageKees Cook1-1/+4
In the quest to remove all stack VLA usage from the kernel[1], this uses the maximum size needed on the stack and adds a sanity check for robustness: index.block_size cannot be larger than PAGE_SIZE nor less than NTFS_BLOCK_SIZE. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Link: http://lkml.kernel.org/r/20180626172909.41453-2-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17fs/ntfs/aops.c: don't disable interrupts during kmap_atomic()Sebastian Andrzej Siewior1-4/+0
ntfs_end_buffer_async_read() disables interrupts around kmap_atomic(). This is a leftover from the old kmap_atomic() implementation which relied on fixed mapping slots, so the caller had to make sure that the same slot could not be reused from an interrupting context. kmap_atomic() was changed to dynamic slots long ago and commit 1ec9c5ddc17a ("include/linux/highmem.h: remove the second argument of k[un]map_atomic()") removed the slot assignements, but the callers were not checked for now redundant interrupt disabling. Remove the conditional interrupt disable. Link: http://lkml.kernel.org/r/20180611144913.gln5mklhqcrfsoom@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17fs/ntfs: use timespec64 directly for timestamp conversionArnd Bergmann2-18/+21
Now that the VFS has been converted from timespec to timespec64 timestamps, only the conversion to/from ntfs timestamps uses 32-bit seconds. This changes that last missing piece to get the ntfs implementation y2038 safe on 32-bit architectures. Link: http://lkml.kernel.org/r/20180718115017.742609-2-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds1-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani1-15/+15
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-03-28ntfs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) callChristoph Hellwig1-2/+2
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as in mark dirty to be written out by fdatasync as well. So dirtying for both flags makes no sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-01ntfs: remove i_version handlingJeff Layton2-15/+0
NTFS keeps track of the i_version counter here, seemingly for no reason. It does not set the SB_I_VERSION flag so it'll never be incremented on write, and it doesn't increment it internally for metadata operations. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds1-16/+16
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+2
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-03buffer: have alloc_page_buffers() use __GFP_NOFAILJens Axboe2-2/+2
Instead of adding weird retry logic in that function, utilize __GFP_NOFAIL to ensure that the vm takes care of handling any potential retries appropriately. This means we don't have to call free_more_memory() from here. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds1-17/+14
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-08-01fs: convert a pile of fsync routines to errseq_t based reportingJeff Layton2-2/+2
This patch converts most of the in-kernel filesystems that do writeback out of the pagecache to report errors using the errseq_t-based infrastructure that was recently added. This allows them to report errors once for each open file description. Most filesystems have a fairly straightforward fsync operation. They call filemap_write_and_wait_range to write back all of the data and wait on it, and then (sometimes) sync out the metadata. For those filesystems this is a straightforward conversion from calling filemap_write_and_wait_range in their fsync operation to calling file_write_and_wait_range. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-17/+14
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-05-28ntfs: Use ERR_CAST() to avoid cross-structure castKees Cook1-1/+1
When trying to propagate an error result, the error return path attempts to retain the error, but does this with an open cast across very different types, which the upcoming structure layout randomization plugin flags as being potentially dangerous in the face of randomization. This is a false positive, but what this code actually wants to do is use ERR_CAST() to retain the error value. Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge branch 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-blockLinus Torvalds2-4/+3
Pull fs meta data unmap optimization from Jens Axboe: "A series from Jan Kara, providing a more efficient way for unmapping meta data from in the buffer cache than doing it block-by-block. Provide a general helper that existing callers can use" * 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block: fs: Remove unmap_underlying_metadata fs: Add helper to clean bdev aliases under a bh and use it ext2: Use clean_bdev_aliases() instead of iteration ext4: Use clean_bdev_aliases() instead of iteration direct-io: Use clean_bdev_aliases() instead of handmade iteration fs: Provide function to unmap metadata for a range of blocks
2016-12-13Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds3-0/+3
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
2016-11-04fs: Add helper to clean bdev aliases under a bh and use itJan Kara2-4/+3
Add a helper function that clears buffer heads from a block device aliasing passed bh. Use this helper function from filesystems instead of the original unmap_underlying_metadata() to save some boiler plate code and also have a better name for the functionalily since it is not unmapping anything for a *long* time. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01mm: only include blk_types in swap.h if CONFIG_SWAP is enabledChristoph Hellwig2-0/+2
It's only needed for the CONFIG_SWAP-only use of bio_end_io_t. Because CONFIG_SWAP implies CONFIG_BLOCK this will allow to drop some ifdefs in blk_types.h. Instead we'll need to add a few explicit includes that were implicit before, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01block,fs: untangle fs.h and blk_types.hChristoph Hellwig1-0/+1
Nothing in fs.h should require blk_types.h to be included. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-30fs: remove the never implemented aio_fsync file operationChristoph Hellwig1-2/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-10-08Merge remote-tracking branch 'jk/vfs' into work.miscAl Viro1-1/+1
2016-09-27fs: Replace current_fs_time() with current_time()Deepa Dinamani2-2/+2
current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27get rid of separate multipage fault-in primitivesAl Viro1-1/+1
* the only remaining callers of "short" fault-ins are just as happy with generic variants (both in lib/iov_iter.c); switch them to multipage variants, kill the "short" ones * rename the multipage variants to now available plain ones. * get rid of compat macro defining iov_iter_fault_in_multipage_readable by expanding it in its only user. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-22fs: Give dentry to inode_change_ok() instead of inodeJan Kara1-1/+1
inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2016-07-28Merge branch 'work.misc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted cleanups and fixes. Probably the most interesting part long-term is ->d_init() - that will have a bunch of followups in (at least) ceph and lustre, but we'll need to sort the barrier-related rules before it can get used for really non-trivial stuff. Another fun thing is the merge of ->d_iput() callers (dentry_iput() and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all except the one in __d_lookup_lru())" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) fs/dcache.c: avoid soft-lockup in dput() vfs: new d_init method vfs: Update lookup_dcache() comment bdev: get rid of ->bd_inodes Remove last traces of ->sync_page new helper: d_same_name() dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends() vfs: clean up documentation vfs: document ->d_real() vfs: merge .d_select_inode() into .d_real() unify dentry_iput() and dentry_unlink_inode() binfmt_misc: ->s_root is not going anywhere drop redundant ->owner initializations ufs: get rid of redundant checks orangefs: constify inode_operations missed comment updates from ->direct_IO() prototype change file_inode(f)->i_mapping is f->f_mapping trim fsnotify hooks a bit 9p: new helper - v9fs_parent_fid() debugfs: ->d_parent is never NULL or negative ...
2016-07-28Merge branch 'salted-string-hash'Linus Torvalds1-1/+1
This changes the vfs dentry hashing to mix in the parent pointer at the _beginning_ of the hash, rather than at the end. That actually improves both the hash and the code generation, because we can move more of the computation to the "static" part of the dcache setup, and do less at lookup runtime. It turns out that a lot of other hash users also really wanted to mix in a base pointer as a 'salt' for the hash, and so the slightly extended interface ends up working well for other cases too. Users that want a string hash that is purely about the string pass in a 'salt' pointer of NULL. * merge branch 'salted-string-hash': fs/dcache.c: Save one 32-bit multiply in dcache lookup vfs: make the string hashes salt the hash
2016-06-30Remove last traces of ->sync_pageMatthew Wilcox1-1/+1
Commit 7eaceaccab5f removed ->sync_page, but a few mentions of it still existed in documentation and comments, Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-10vfs: make the string hashes salt the hashLinus Torvalds1-1/+1
We always mixed in the parent pointer into the dentry name hash, but we did it late at lookup time. It turns out that we can simplify that lookup-time action by salting the hash with the parent pointer early instead of late. A few other users of our string hashes also wanted to mix in their own pointers into the hash, and those are updated to use the same mechanism. Hash users that don't have any particular initial salt can just use the NULL pointer as a no-salt. Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie5-8/+8
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-01fs: simplify the generic_write_sync prototypeChristoph Hellwig1-5/+2
The kiocb already has the new position, so use that. The only interesting case is AIO, where we currently don't bother updating ki_pos. We're about to free the kiocb after we're done, so we might as well update it to make everyone's life simpler. While we're at it also return the bytes written argument passed in if we were successful so that the boilerplate error switch code in the callers can go away. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01fs: add IOCB_SYNC and IOCB_DSYNCChristoph Hellwig1-1/+1
This will allow us to do per-I/O sync file writes, as required by a lot of fileservers or storage targets. XXX: Will need a few additional audits for O_DSYNC Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov8-36/+27
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov14-187/+187
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22wrappers for ->i_mutex accessAl Viro4-15/+15
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-14kmemcg: account certain kmem allocations to memcgVladimir Davydov1-2/+2
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, fs: introduce mapping_gfp_constraint()Michal Hocko1-2/+2
There are many places which use mapping_gfp_mask to restrict a more generic gfp mask which would be used for allocations which are not directly related to the page cache but they are performed in the same context. Let's introduce a helper function which makes the restriction explicit and easier to track. This patch doesn't introduce any functional changes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04ntfs: delete unnecessary checks before calling iput()SF Markus Elfring1-14/+7
iput() tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-07ntfs: super.c: Fix error logNik Nyby1-1/+1
"transation" should be "transaction" Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-04Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
2015-06-24mm: do not ignore mapping_gfp_mask in page cache allocation pathsMichal Hocko1-1/+2
page_cache_read, do_generic_file_read, __generic_file_splice_read and __ntfs_grab_cache_pages currently ignore mapping_gfp_mask when calling add_to_page_cache_lru which might cause recursion into fs down in the direct reclaim path if the mapping really relies on GFP_NOFS semantic. This doesn't seem to be the case now because page_cache_read (page fault path) doesn't seem to suffer from the reclaim recursion issues and do_generic_file_read and __generic_file_splice_read also shouldn't be called under fs locks which would deadlock in the reclaim path. Anyway it is better to obey mapping gfp mask and prevent from later breakage. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24NTFS: use kvfree() in ntfs_free()Pekka Enberg1-6/+1
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-23fs: cleanup slight list_entry abuseRasmus Villemoes1-1/+1
list_entry is just a wrapper for container_of, but it is arguably wrong (and slightly confusing) to use it when the pointed-to struct member is not a struct list_head. Use container_of directly instead. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-23fs: Rename file_remove_suid() to file_remove_privs()Jan Kara1-1/+1
file_remove_suid() is a misnomer since it removes also file capabilities stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells something else than whether file_remove_suid() call is necessary which leads to bugs. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 16:06:35 +0000