| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The ignore mask logic in send_to_group() does not match the logic
in fanotify_should_send_event(). In the latter, a vfsmount mark ignore
mask precedes an inode mark mask and in the former, it does not.
That difference may cause events to be sent to fanotify backend for no
reason. Fix the logic in send_to_group() to match that of
fanotify_should_send_event().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When event on child inodes are sent to the parent inode mark and
parent inode mark was not marked with FAN_EVENT_ON_CHILD, the event
will not be delivered to the listener process. However, if the same
process also has a mount mark, the event to the parent inode will be
delivered regadless of the mount mark mask.
This behavior is incorrect in the case where the mount mark mask does
not contain the specific event type. For example, the process adds
a mark on a directory with mask FAN_MODIFY (without FAN_EVENT_ON_CHILD)
and a mount mark with mask FAN_CLOSE_NOWRITE (without FAN_ONDIR).
A modify event on a file inside that directory (and inside that mount)
should not create a FAN_MODIFY event, because neither of the marks
requested to get that event on the file.
Fixes: 1968f5eed54c ("fanotify: use both marks when possible")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc filesystem updates from Jan Kara:
"udf, ext2, quota, fsnotify fixes & cleanups:
- udf fixes for handling of media without uid/gid
- udf fixes for some corner cases in parsing of volume recognition
sequence
- improvements of fsnotify handling of ENOMEM
- new ioctl to allow setting of watch descriptor id for inotify (for
checkpoint - restart)
- small ext2, reiserfs, quota cleanups"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Kill an unused extern entry form quota.h
reiserfs: Remove VLA from fs/reiserfs/reiserfs.h
udf: fix potential refcnt problem of nls module
ext2: change return code to -ENOMEM when failing memory allocation
udf: Do not mark possibly inconsistent filesystems as closed
fsnotify: Let userspace know about lost events due to ENOMEM
fanotify: Avoid lost events due to ENOMEM for unlimited queues
udf: Remove never implemented mount options
udf: Update mount option documentation
udf: Provide saner default for invalid uid / gid
udf: Clean up handling of invalid uid/gid
udf: Apply uid/gid mount options also to new inodes & chown
udf: Ignore [ug]id=ignore mount options
udf: Fix handling of Partition Descriptors
udf: Unify common handling of descriptors
udf: Convert descriptor index definitions to enum
udf: Allow volume descriptor sequence to be terminated by unrecorded block
udf: Simplify handling of Volume Descriptor Pointers
udf: Fix off-by-one in volume descriptor sequence length
inotify: Extend ioctl to allow to request id of new watch descriptor
|
|
Using the fs-internal do_fanotify_mark() helper allows us to get rid of
the fs-internal call to the sys_fanotify_mark() syscall.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Acked-by: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Using the inotify-internal do_inotify_init() helper allows us to get rid
of the in-kernel call to sys_inotify_init1() syscall.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Acked-by: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Currently if notification event is lost due to event allocation failing
we ENOMEM, we just silently continue (except for fanotify permission
events where we deny the access). This is undesirable as userspace has
no way of knowing whether the notifications it got are complete or not.
Treat lost events due to ENOMEM the same way as lost events due to queue
overflow so that userspace knows something bad happened and it likely
needs to rescan the filesystem.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Fanotify queues of unlimited length do not expect events can be lost.
Since these queues are used for system auditing and other security
related tasks, loosing events can even have security implications.
Currently, since the allocation is small (32-bytes), it cannot fail
however when we start accounting events in memcgs, allocation can start
failing. So avoid loosing events due to failure to allocate memory by
making event allocation use __GFP_NOFAIL.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Watch descriptor is id of the watch created by inotify_add_watch().
It is allocated in inotify_add_to_idr(), and takes the numbers
starting from 1. Every new inotify watch obtains next available
number (usually, old + 1), as served by idr_alloc_cyclic().
CRIU (Checkpoint/Restore In Userspace) project supports inotify
files, and restores watched descriptors with the same numbers,
they had before dump. Since there was no kernel support, we
had to use cycle to add a watch with specific descriptor id:
while (1) {
int wd;
wd = inotify_add_watch(inotify_fd, path, mask);
if (wd < 0) {
break;
} else if (wd == desired_wd_id) {
ret = 0;
break;
}
inotify_rm_watch(inotify_fd, wd);
}
(You may find the actual code at the below link:
https://github.com/checkpoint-restore/criu/blob/v3.7/criu/fsnotify.c#L577)
The cycle is suboptiomal and very expensive, but since there is no better
kernel support, it was the only way to restore that. Happily, we had met
mostly descriptors with small id, and this approach had worked somehow.
But recent time containers with inotify with big watch descriptors
begun to come, and this way stopped to work at all. When descriptor id
is something about 0x34d71d6, the restoring process spins in busy loop
for a long time, and the restore hungs and delay of migration from node
to node could easily be watched.
This patch aims to solve this problem. It introduces new ioctl
INOTIFY_IOC_SETNEXTWD, which allows to request the number of next created
watch descriptor from userspace. It simply calls idr_set_cursor() primitive
to populate idr::idr_next, so that next idr_alloc_cyclic() allocation
will return this id, if it is not occupied. This is the way which is
used to restore some other resources from userspace. For example,
/proc/sys/kernel/ns_last_pid works the same for task pids.
The new code is under CONFIG_CHECKPOINT_RESTORE #define, so small system
may exclude it.
v2: Use INT_MAX instead of custom definition of max id,
as IDR subsystem guarantees id is between 0 and INT_MAX.
CC: Jan Kara <jack@suse.cz>
CC: Matthew Wilcox <willy@infradead.org>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"The usual rocket-science from trivial tree for 4.15"
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
MAINTAINERS: relinquish kconfig
MAINTAINERS: Update my email address
treewide: Fix typos in Kconfig
kfifo: Fix comments
init/Kconfig: Fix module signing document location
misc: ibmasm: Return error on error path
HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
MAINTAINERS: Correct path to uDraw PS3 driver
tracing: Fix doc mistakes in trace sample
tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
mm/huge_memory.c: fixup grammar in comment
lib/xz: Add fall-through comments to a switch statement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, ext2, isofs and udf fixes from Jan Kara:
- two small quota error handling fixes
- two isofs fixes for architectures with signed char
- several udf block number overflow and signedness fixes
- ext2 rework of mount option handling to avoid GFP_KERNEL allocation
with spinlock held
- ... it also contains a patch to implement auditing of responses to
fanotify permission events. That should have been in the fanotify
pull request but I mistakenly merged that patch into a wrong branch
and noticed only now at which point I don't think it's worth rebasing
and redoing.
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: be aware of error from dquot_initialize
quota: fix potential infinite loop
isofs: use unsigned char types consistently
isofs: fix timestamps beyond 2027
udf: Fix some sign-conversion warnings
udf: Fix signed/unsigned format specifiers
udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF
udf: Remove some outdate references from documentation
udf: Avoid overflow when session starts at large offset
ext2: Fix possible sleep in atomic during mount option parsing
ext2: Parse mount options into a dedicated structure
audit: Record fanotify access control decisions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- fixes of use-after-tree issues when handling fanotify permission
events from Miklos
- refcount_t conversions from Elena
- fixes of ENOMEM handling in dnotify and fsnotify from me
* 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: convert fsnotify_mark.refcnt from atomic_t to refcount_t
fanotify: clean up CONFIG_FANOTIFY_ACCESS_PERMISSIONS ifdefs
fsnotify: clean up fsnotify()
fanotify: fix fsnotify_prepare_user_wait() failure
fsnotify: fix pinning group in fsnotify_prepare_user_wait()
fsnotify: pin both inode and vfsmount mark
fsnotify: clean up fsnotify_prepare/finish_user_wait()
fsnotify: convert fsnotify_group.refcnt from atomic_t to refcount_t
fsnotify: Protect bail out path of fsnotify_add_mark_locked() properly
dnotify: Handle errors from fsnotify_add_mark_locked() in fcntl_dirnotify()
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable fsnotify_mark.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The only negative from this patch should be an addition of 32bytes to
'struct fsnotify_group' if CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not
defined.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Use helpers to get first and next marks from connector.
Also get rid of inode_node/vfsmount_node local variables, which just refers
to the same objects as iter_info. There was an srcu_dereference() for
foo_node, but that's completely superfluous since we've already done it
when obtaining foo_node.
Also get rid of inode_group/vfsmount_group local variables; checking
against non-NULL for these is the same as checking against non-NULL
inode_mark/vfsmount_mark.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
If fsnotify_prepare_user_wait() fails, we leave the event on the
notification list. Which will result in a warning in
fsnotify_destroy_event() and later use-after-free.
Instead of adding a new helper to remove the event from the list in this
case, I opted to move the prepare/finish up into fanotify_handle_event().
This will allow these to be moved further out into the generic code later,
and perhaps let us move to non-sleeping RCU.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 05f0e38724e8 ("fanotify: Release SRCU lock when waiting for userspace response")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Blind increment of group's user_waits is not enough, we could be far enough
in the group's destruction that it isn't taken into account (i.e. grabbing
the mark ref afterwards doesn't guarantee that it was the ref coming from
the _group_ that was grabbed).
Instead we need to check (under lock) that the mark is still attached to
the group after having obtained a ref to the mark. If not, skip it.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 9385a84d7e1f ("fsnotify: Pass fsnotify_iter_info into handle_event handler")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
We may fail to pin one of the marks in fsnotify_prepare_user_wait() when
dropping the srcu read lock, resulting in use after free at the next
iteration.
Solution is to store both marks in iter_info instead of just the one we'll
be sending the event for.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 9385a84d7e1f ("fsnotify: Pass fsnotify_iter_info into handle_event handler")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch doesn't actually fix any bug, just paves the way for fixing mark
and group pinning.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable fsnotify_group.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When fsnotify_add_mark_locked() fails it cleans up the mark it was
adding. Since the mark is already visible in group's list, we should
protect update of mark->flags with mark->lock. I'm not aware of any real
issues this could cause (since we also hold group->mark_mutex) but
better be safe and obey locking rules properly.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fsnotify_add_mark_locked() can fail but we do not check its return
value. This didn't matter before commit 9dd813c15b2c "fsnotify: Move
mark list head from object into dedicated structure" as none of possible
failures could happen for dnotify but after that commit -ENOMEM can be
returned. Handle this error properly in fcntl_dirnotify() as
otherwise we just hit BUG_ON(dn_mark->dn) in dnotify_free_mark().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reported-by: syzkaller
Fixes: 9dd813c15b2c101168808d4f5941a29985758973
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch fixes some spelling typos found in Kconfig files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The fanotify interface allows user space daemons to make access
control decisions. Under common criteria requirements, we need to
optionally record decisions based on policy. This patch adds a bit mask,
FAN_AUDIT, that a user space daemon can 'or' into the response decision
which will tell the kernel that it made a decision and record it.
It would be used something like this in user space code:
response.response = FAN_DENY | FAN_AUDIT;
write(fd, &response, sizeof(struct fanotify_response));
When the syscall ends, the audit system will record the decision as a
AUDIT_FANOTIFY auxiliary record to denote that the reason this event
occurred is the result of an access control decision from fanotify
rather than DAC or MAC policy.
A sample event looks like this:
type=PATH msg=audit(1504310584.332:290): item=0 name="./evil-ls"
inode=1319561 dev=fc:03 mode=0100755 ouid=1000 ogid=1000 rdev=00:00
obj=unconfined_u:object_r:user_home_t:s0 nametype=NORMAL
type=CWD msg=audit(1504310584.332:290): cwd="/home/sgrubb"
type=SYSCALL msg=audit(1504310584.332:290): arch=c000003e syscall=2
success=no exit=-1 a0=32cb3fca90 a1=0 a2=43 a3=8 items=1 ppid=901
pid=959 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000
fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts1 ses=3 comm="bash"
exe="/usr/bin/bash" subj=unconfined_u:unconfined_r:unconfined_t:
s0-s0:c0.c1023 key=(null)
type=FANOTIFY msg=audit(1504310584.332:290): resp=2
Prior to using the audit flag, the developer needs to call
fanotify_init or'ing in FAN_ENABLE_AUDIT to ensure that the kernel
supports auditing. The calling process must also have the CAP_AUDIT_WRITE
capability.
Signed-off-by: sgrubb <sgrubb@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Make this const as it is never modified.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
take_dentry_name_snapshot() takes a safe snapshot of dentry name;
if the name is a short one, it gets copied into caller-supplied
structure, otherwise an extra reference to external name is grabbed
(those are never modified). In either case the pointer to stable
string is stored into the same structure.
dentry must be held by the caller of take_dentry_name_snapshot(),
but may be freely dropped afterwards - the snapshot will stay
until destroyed by release_dentry_name_snapshot().
Intended use:
struct name_snapshot s;
take_dentry_name_snapshot(&s, dentry);
...
access s.name
...
release_dentry_name_snapshot(&s);
Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name
to pass down with event.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When delivering an event to userspace for a file on an NFS share,
if the file is deleted on server side before user reads the event,
user will not get the event.
If the event queue contained several events, the stale event is
quietly dropped and read() returns to user with events read so far
in the buffer.
If the event queue contains a single stale event or if the stale
event is a permission event, read() returns to user with the kernel
internal error code 518 (EOPENSTALE), which is not a POSIX error code.
Check the internal return value -EOPENSTALE in fanotify_read(), just
the same as it is checked in path_openat() and drop the event in the
cases that it is not already dropped.
This is a reproducer from Marko Rauhamaa:
Just take the example program listed under "man fanotify" ("fantest")
and follow these steps:
==============================================================
NFS Server NFS Client(1) NFS Client(2)
==============================================================
# echo foo >/nfsshare/bar.txt
# cat /nfsshare/bar.txt
foo
# ./fantest /nfsshare
Press enter key to terminate.
Listening for events.
# rm -f /nfsshare/bar.txt
# cat /nfsshare/bar.txt
read: Unknown error 518
cat: /nfsshare/bar.txt: Operation not permitted
==============================================================
where NFS Client (1) and (2) are two terminal sessions on a single NFS
Client machine.
Reported-by: Marko Rauhamaa <marko.rauhamaa@f-secure.com>
Tested-by: Marko Rauhamaa <marko.rauhamaa@f-secure.com>
Cc: <linux-api@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
We recently shifted this code around, so we're no longer holding the
lock on this path.
Fixes: 755b5bc681eb ("fsnotify: Remove indirection from mark list addition")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Pointer to ->free_mark callback unnecessarily occupies one long in each
fsnotify_mark although they are the same for all marks from one
notification group. Move the callback pointer to fsnotify_ops.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Currently we initialize mark->group only in fsnotify_add_mark_lock().
However we will need to access fsnotify_ops of corresponding group from
fsnotify_put_mark() so we need mark->group initialized earlier. Do that
in fsnotify_init_mark() which has a consequence that once
fsnotify_init_mark() is called on a mark, the mark has to be destroyed
by fsnotify_put_mark().
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
inode_mark.c now contains only a single function. Move it to
fs/notify/fsnotify.c and remove inode_mark.c.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
These are very thin wrappers, just remove them. Drop
fs/notify/vfsmount_mark.c as it is empty now.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The function is already mostly contained in what
fsnotify_clear_marks_by_group() does. Just update that function to not
select marks when all of them should be destroyed and remove
fsnotify_detach_group_marks().
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The _flags() suffix in the function name was more confusing than
explaining so just remove it. Also rename the argument from 'flags' to
'type' to better explain what the function expects.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Inline these helpers as they are very thin. We still keep them as we
don't want to expose details about how list type is determined.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
These helpers are just very thin wrappers now. Remove them.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
These helpers are now only a simple assignment and just obfuscate
what is going on. Remove them.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When userspace task processing fanotify permission events screws up and
does not respond, fsnotify_mark_srcu SRCU is held indefinitely which
causes further hangs in the whole notification subsystem. Although we
cannot easily solve the problem of operations blocked waiting for
response from userspace, we can at least somewhat localize the damage by
dropping SRCU lock before waiting for userspace response and reacquiring
it when userspace responds.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Pass fsnotify_iter_info into ->handle_event() handler so that it can
release and reacquire SRCU lock via fsnotify_prepare_user_wait() and
fsnotify_finish_user_wait() functions. These functions also make sure
current marks are appropriately pinned so that iteration protected by
srcu in fsnotify() stays safe.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fanotify wants to drop fsnotify_mark_srcu lock when waiting for response
from userspace so that the whole notification subsystem is not blocked
during that time. This patch provides a framework for safely getting
mark reference for a mark found in the object list which pins the mark
in that list. We can then drop fsnotify_mark_srcu, wait for userspace
response and then safely continue iteration of the object list once we
reaquire fsnotify_mark_srcu.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Currently we queue all marks for destruction on group shutdown and then
destroy them from fsnotify_destroy_group() instead from a worker thread
which is the usual path. However worker can already be processing some
list of marks to destroy so this does not make 100% all marks are really
destroyed by the time group is shut down. This isn't a big problem as
each mark holds group reference and thus group stays partially alive
until all marks are really freed but there's no point in complicating
our lives - just wait for the delayed work to be finished instead.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Instead of removing mark from object list from fsnotify_detach_mark(),
remove the mark when last reference to the mark is dropped. This will
allow fanotify to wait for userspace response to event without having to
hold onto fsnotify_mark_srcu.
To avoid pinning inodes by elevated refcount (and thus e.g. delaying
file deletion) while someone holds mark reference, we detach connector
from the object also from fsnotify_destroy_marks() and not only after
removing last mark from the list as it was now.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Currently we queue mark into a list of marks for destruction in
__fsnotify_free_mark() and keep the last mark reference dangling. After the
worker waits for SRCU period, it drops the last reference to the mark
which frees it. This scheme has the disadvantage that if we hold
reference to a mark and drop and reacquire SRCU lock, the mark can get
freed immediately which is slightly inconvenient and we will need to
avoid this in the future.
Move to a scheme where queueing of mark into a list of marks for
destruction happens when the last reference to the mark is dropped. Also
drop reference to the mark held by group list already when mark is
removed from that list instead of dropping it only from the destruction
worker.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Dropping mark reference can result in mark being freed. Although it
should not happen in inotify_remove_from_idr() since caller should hold
another reference, just don't risk lock up just after WARN_ON
unnecessarily. Also fold do_inotify_remove_from_idr() into the single
callsite as that function really is just two lines of real code.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Currently we free fsnotify_mark_connector structure only when inode /
vfsmount is getting freed. This can however impose noticeable memory
overhead when marks get attached to inodes only temporarily. So free the
connector structure once the last mark is detached from the object.
Since notification infrastructure can be working with the connector
under the protection of fsnotify_mark_srcu, we have to be careful and
free the fsnotify_mark_connector only after SRCU period passes.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
So far list of marks attached to an object (inode / vfsmount) was
protected by i_lock or mnt_root->d_lock. This dictates that the list
must be empty before the object can be destroyed although the list is
now anchored in the fsnotify_mark_connector structure. Protect the list
by a spinlock in the fsnotify_mark_connector structure to decouple
lifetime of a list of marks from a lifetime of the object. This also
simplifies the code quite a bit since we don't have to differentiate
between inode and vfsmount lists in quite a few places anymore.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
