summaryrefslogtreecommitdiffstats
path: root/fs/notify/inotify
AgeCommit message (Collapse)AuthorFilesLines
2019-09-23Merge tag 'selinux-pr-20190917' of ↵Linus Torvalds1-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Add LSM hooks, and SELinux access control hooks, for dnotify, fanotify, and inotify watches. This has been discussed with both the LSM and fs/notify folks and everybody is good with these new hooks. - The LSM stacking changes missed a few calls to current_security() in the SELinux code; we fix those and remove current_security() for good. - Improve our network object labeling cache so that we always return the object's label, even when under memory pressure. Previously we would return an error if we couldn't allocate a new cache entry, now we always return the label even if we can't create a new cache entry for it. - Convert the sidtab atomic_t counter to a normal u32 with READ/WRITE_ONCE() and memory barrier protection. - A few patches to policydb.c to clean things up (remove forward declarations, long lines, bad variable names, etc) * tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm: remove current_security() selinux: fix residual uses of current_security() for the SELinux blob selinux: avoid atomic_t usage in sidtab fanotify, inotify, dnotify, security: add security hook for fs notifications selinux: always return a secid from the network caches if we find one selinux: policydb - rename type_val_to_struct_array selinux: policydb - fix some checkpatch.pl warnings selinux: shuffle around policydb.c to get rid of forward declarations
2019-08-12fanotify, inotify, dnotify, security: add security hook for fs notificationsAaron Goidel1-2/+12
As of now, setting watches on filesystem objects has, at most, applied a check for read access to the inode, and in the case of fanotify, requires CAP_SYS_ADMIN. No specific security hook or permission check has been provided to control the setting of watches. Using any of inotify, dnotify, or fanotify, it is possible to observe, not only write-like operations, but even read access to a file. Modeling the watch as being merely a read from the file is insufficient for the needs of SELinux. This is due to the fact that read access should not necessarily imply access to information about when another process reads from a file. Furthermore, fanotify watches grant more power to an application in the form of permission events. While notification events are solely, unidirectional (i.e. they only pass information to the receiving application), permission events are blocking. Permission events make a request to the receiving application which will then reply with a decision as to whether or not that action may be completed. This causes the issue of the watching application having the ability to exercise control over the triggering process. Without drawing a distinction within the permission check, the ability to read would imply the greater ability to control an application. Additionally, mount and superblock watches apply to all files within the same mount or superblock. Read access to one file should not necessarily imply the ability to watch all files accessed within a given mount or superblock. In order to solve these issues, a new LSM hook is implemented and has been placed within the system calls for marking filesystem objects with inotify, fanotify, and dnotify watches. These calls to the hook are placed at the point at which the target path has been resolved and are provided with the path struct, the mask of requested notification events, and the type of object on which the mark is being set (inode, superblock, or mount). The mask and obj_type have already been translated into common FS_* values shared by the entirety of the fs notification infrastructure. The path struct is passed rather than just the inode so that the mount is available, particularly for mount watches. This also allows for use of the hook by pathname-based security modules. However, since the hook is intended for use even by inode based security modules, it is not placed under the CONFIG_SECURITY_PATH conditional. Otherwise, the inode-based security modules would need to enable all of the path hooks, even though they do not use any of them. This only provides a hook at the point of setting a watch, and presumes that permission to set a particular watch implies the ability to receive all notification about that object which match the mask. This is all that is required for SELinux. If other security modules require additional hooks or infrastructure to control delivery of notification, these can be added by them. It does not make sense for us to propose hooks for which we have no implementation. The understanding that all notifications received by the requesting application are all strictly of a type for which the application has been granted permission shows that this implementation is sufficient in its coverage. Security modules wishing to provide complete control over fanotify must also implement a security_file_open hook that validates that the access requested by the watching application is authorized. Fanotify has the issue that it returns a file descriptor with the file mode specified during fanotify_init() to the watching process on event. This is already covered by the LSM security_file_open hook if the security module implements checking of the requested file mode there. Otherwise, a watching process can obtain escalated access to a file for which it has not been authorized. The selinux_path_notify hook implementation works by adding five new file permissions: watch, watch_mount, watch_sb, watch_reads, and watch_with_perm (descriptions about which will follow), and one new filesystem permission: watch (which is applied to superblock checks). The hook then decides which subset of these permissions must be held by the requesting application based on the contents of the provided mask and the obj_type. The selinux_file_open hook already checks the requested file mode and therefore ensures that a watching process cannot escalate its access through fanotify. The watch, watch_mount, and watch_sb permissions are the baseline permissions for setting a watch on an object and each are a requirement for any watch to be set on a file, mount, or superblock respectively. It should be noted that having either of the other two permissions (watch_reads and watch_with_perm) does not imply the watch, watch_mount, or watch_sb permission. Superblock watches further require the filesystem watch permission to the superblock. As there is no labeled object in view for mounts, there is no specific check for mount watches beyond watch_mount to the inode. Such a check could be added in the future, if a suitable labeled object existed representing the mount. The watch_reads permission is required to receive notifications from read-exclusive events on filesystem objects. These events include accessing a file for the purpose of reading and closing a file which has been opened read-only. This distinction has been drawn in order to provide a direct indication in the policy for this otherwise not obvious capability. Read access to a file should not necessarily imply the ability to observe read events on a file. Finally, watch_with_perm only applies to fanotify masks since it is the only way to set a mask which allows for the blocking, permission event. This permission is needed for any watch which is of this type. Though fanotify requires CAP_SYS_ADMIN, this is insufficient as it gives implicit trust to root, which we do not do, and does not support least privilege. Signed-off-by: Aaron Goidel <acgoide@tycho.nsa.gov> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce1-5/+3
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12memcg, fsnotify: no oom-kill for remote memcg chargingShakeel Butt1-2/+6
Commit d46eb14b735b ("fs: fsnotify: account fsnotify metadata to kmemcg") added remote memcg charging for fanotify and inotify event objects. The aim was to charge the memory to the listener who is interested in the events but without triggering the OOM killer. Otherwise there would be security concerns for the listener. At the time, oom-kill trigger was not in the charging path. A parallel work added the oom-kill back to charging path i.e. commit 29ef680ae7c2 ("memcg, oom: move out_of_memory back to the charge path"). So to not trigger oom-killer in the remote memcg, explicitly add __GFP_RETRY_MAYFAIL to the fanotigy and inotify event allocations. Link: http://lkml.kernel.org/r/20190514212259.156585-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118Thomas Gleixner2-20/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge branch 'work.dcache' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc dcache updates from Al Viro: "Most of this pile is putting name length into struct name_snapshot and making use of it. The beginning of this series ("ovl_lookup_real_one(): don't bother with strlen()") ought to have been split in two (separate switch of name_snapshot to struct qstr from overlayfs reaping the trivial benefits of that), but I wanted to avoid a rebase - by the time I'd spotted that it was (a) in -next and (b) close to 5.1-final ;-/" * 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: audit_compare_dname_path(): switch to const struct qstr * audit_update_watch(): switch to const struct qstr * inotify_handle_event(): don't bother with strlen() fsnotify: switch send_to_group() and ->handle_event to const struct qstr * fsnotify(): switch to passing const struct qstr * for file_name switch fsnotify_move() to passing const struct qstr * for old_name ovl_lookup_real_one(): don't bother with strlen() sysv: bury the broken "quietly truncate the long filenames" logics nsfs: unobfuscate unexport d_alloc_pseudo()
2019-04-26inotify_handle_event(): don't bother with strlen()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-26fsnotify: switch send_to_group() and ->handle_event to const struct qstr *Al Viro2-4/+4
note that conditions surrounding accesses to dname in audit_watch_handle_event() and audit_mark_handle_event() guarantee that dname won't have been NULL. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-19Make anon_inodes unconditionalDavid Howells1-1/+0
Make the anon_inodes facility unconditional so that it can be used by core VFS code and pidfd code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [christian@brauner.io: adapt commit message to mention pidfds] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-03-11inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()ZhangXiaoxu1-2/+5
Commit 4d97f7d53da7dc83 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") forgot to call fsnotify_put_mark() with IN_MASK_CREATE after fsnotify_find_mark() Fixes: 4d97f7d53da7dc83 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-02-07fsnotify: report FS_ISDIR flag with MOVE_SELF and DELETE_SELF eventsAmir Goldstein1-0/+9
We need to report FS_ISDIR flag with MOVE_SELF and DELETE_SELF events for fanotify, because fanotify API requires the user to explicitly request events on directories by FAN_ONDIR flag. inotify never reported IN_ISDIR with those events. It looks like an oversight, but to avoid the risk of breaking existing inotify programs, mask the FS_ISDIR flag out when reprting those events to inotify backend. We also add the FS_ISDIR flag with FS_ATTRIB event in the case of rename over an empty target directory. inotify did not report IN_ISDIR in this case, but it normally does report IN_ISDIR along with IN_ATTRIB event, so in this case, we do not mask out the FS_ISDIR flag. [JK: Simplify the checks in fsnotify_move()] Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-02-06fsnotify: move mask out of struct fsnotify_eventAmir Goldstein3-6/+9
Common fsnotify_event helpers have no need for the mask field. It is only used by backend code, so move the field out of the abstract fsnotify_event struct and into the concrete backend event structs. This change packs struct inotify_event_info better on 64bit machine and will allow us to cram some more fields into struct fanotify_event_info. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-01-02inotify: Fix fd refcount leak in inotify_add_watch().Tetsuo Handa1-2/+4
Commit 4d97f7d53da7dc83 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") forgot to call fdput() before bailing out. Fixes: 4d97f7d53da7dc83 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") CC: stable@vger.kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-10-04fsnotify: convert runtime BUG_ON() to BUILD_BUG_ON()Amir Goldstein1-1/+1
The BUG_ON() statements to verify number of bits in ALL_FSNOTIFY_BITS and ALL_INOTIFY_BITS are converted to build time check of the constant. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-08-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+10
Merge updates from Andrew Morton: - a few misc things - a few Y2038 fixes - ntfs fixes - arch/sh tweaks - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) mm/hmm.c: remove unused variables align_start and align_end fs/userfaultfd.c: remove redundant pointer uwq mm, vmacache: hash addresses based on pmd mm/list_lru: introduce list_lru_shrink_walk_irq() mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one() mm/list_lru.c: move locking from __list_lru_walk_one() to its caller mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node() mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP mm/sparse: delete old sparse_init and enable new one mm/sparse: add new sparse_init_nid() and sparse_init() mm/sparse: move buffer init/fini to the common place mm/sparse: use the new sparse buffer functions in non-vmemmap mm/sparse: abstract sparse buffer allocations mm/hugetlb.c: don't zero 1GiB bootmem pages mm, page_alloc: double zone's batchsize mm/oom_kill.c: document oom_lock mm/hugetlb: remove gigantic page support for HIGHMEM mm, oom: remove sleep from under oom_lock kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous() mm/cma: remove unsupported gfp_mask parameter from cma_alloc() ...
2018-08-17fs: fsnotify: account fsnotify metadata to kmemcgShakeel Butt2-2/+10
Patch series "Directed kmem charging", v8. The Linux kernel's memory cgroup allows limiting the memory usage of the jobs running on the system to provide isolation between the jobs. All the kernel memory allocated in the context of the job and marked with __GFP_ACCOUNT will also be included in the memory usage and be limited by the job's limit. The kernel memory can only be charged to the memcg of the process in whose context kernel memory was allocated. However there are cases where the allocated kernel memory should be charged to the memcg different from the current processes's memcg. This patch series contains two such concrete use-cases i.e. fsnotify and buffer_head. The fsnotify event objects can consume a lot of system memory for large or unlimited queues if there is either no or slow listener. The events are allocated in the context of the event producer. However they should be charged to the event consumer. Similarly the buffer_head objects can be allocated in a memcg different from the memcg of the page for which buffer_head objects are being allocated. To solve this issue, this patch series introduces mechanism to charge kernel memory to a given memcg. In case of fsnotify events, the memcg of the consumer can be used for charging and for buffer_head, the memcg of the page can be charged. For directed charging, the caller can use the scope API memalloc_[un]use_memcg() to specify the memcg to charge for all the __GFP_ACCOUNT allocations within the scope. This patch (of 2): A lot of memory can be consumed by the events generated for the huge or unlimited queues if there is either no or slow listener. This can cause system level memory pressure or OOMs. So, it's better to account the fsnotify kmem caches to the memcg of the listener. However the listener can be in a different memcg than the memcg of the producer and these allocations happen in the context of the event producer. This patch introduces remote memcg charging API which the producer can use to charge the allocations to the memcg of the listener. There are seven fsnotify kmem caches and among them allocations from dnotify_struct_cache, dnotify_mark_cache, fanotify_mark_cache and inotify_inode_mark_cachep happens in the context of syscall from the listener. So, SLAB_ACCOUNT is enough for these caches. The objects from fsnotify_mark_connector_cachep are not accounted as they are small compared to the notification mark or events and it is unclear whom to account connector to since it is shared by all events attached to the inode. The allocations from the event caches happen in the context of the event producer. For such caches we will need to remote charge the allocations to the listener's memcg. Thus we save the memcg reference in the fsnotify_group structure of the listener. This patch has also moved the members of fsnotify_group to keep the size same, at least for 64 bit build, even with additional member by filling the holes. [shakeelb@google.com: use GFP_KERNEL_ACCOUNT rather than open-coding it] Link: http://lkml.kernel.org/r/20180702215439.211597-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-27inotify: Add flag IN_MASK_CREATE for inotify_add_watch()Henry Wilson1-1/+8
The flag IN_MASK_CREATE is introduced as a flag for inotiy_add_watch() which prevents inotify from modifying any existing watches when invoked. If the pathname specified in the call has a watched inode associated with it and IN_MASK_CREATE is specified, fail with an errno of EEXIST. Use of IN_MASK_CREATE with IN_MASK_ADD is reserved for future use and will return EINVAL. RATIONALE In the current implementation, there is no way to prevent inotify_add_watch() from modifying existing watch descriptors. Even if the caller keeps a record of all watch descriptors collected, this is only sufficient to detect that an existing watch descriptor may have been modified. The assumption that a particular path will map to the same inode over multiple calls to inotify_add_watch() cannot be made as files can be renamed or deleted. It is also not possible to assume that two distinct paths do no map to the same inode, due to hard-links or a dereferenced symbolic link. Further uses of inotify_add_watch() to revert the change may cause other watch descriptors to be modified or created, merely compunding the problem. There is currently no system call such as inotify_modify_watch() to explicity modify a watch descriptor, which would be able to revert unwanted changes. Thus the caller cannot guarantee to be able to revert any changes to existing watch decriptors. Additionally the caller cannot assume that the events that are associated with a watch descriptor are within the set requested, as any future calls to inotify_add_watch() may unintentionally modify a watch descriptor's mask. Thus it cannot currently be guaranteed that a watch descriptor will only generate events which have been requested. The program must filter events which come through its watch descriptor to within its expected range. Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Henry Wilson <henry.wilson@acentic.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-05-18fsnotify: add fsnotify_add_inode_mark() wrappersAmir Goldstein1-1/+1
Before changing the arguments of the functions fsnotify_add_mark() and fsnotify_add_mark_locked(), convert most callers to use a wrapper. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-05-18fsnotify: generalize iteration of marks by object typeAmir Goldstein1-4/+4
Make some code that handles marks of object types inode and vfsmount generic, so it can handle other object types. Introduce fsnotify_foreach_obj_type macro to iterate marks by object type and fsnotify_iter_{should|set}_report_type macros to set/test report_mask. This is going to be used for adding mark of another object type (super block mark). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-05-18fsnotify: remove redundant arguments to handle_event()Amir Goldstein3-7/+9
inode_mark and vfsmount_mark arguments are passed to handle_event() operation as function arguments as well as on iter_info struct. The difference is that iter_info struct may contain marks that should not be handled and are represented as NULL arguments to inode_mark or vfsmount_mark. Instead of passing the inode_mark and vfsmount_mark arguments, add a report_mask member to iter_info struct to indicate which marks should be handled, versus marks that should only be kept alive during user wait. This change is going to be used for passing more mark types with handle_event() (i.e. super block marks). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-05Merge branch 'for_linus' of ↵Linus Torvalds2-1/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull misc filesystem updates from Jan Kara: "udf, ext2, quota, fsnotify fixes & cleanups: - udf fixes for handling of media without uid/gid - udf fixes for some corner cases in parsing of volume recognition sequence - improvements of fsnotify handling of ENOMEM - new ioctl to allow setting of watch descriptor id for inotify (for checkpoint - restart) - small ext2, reiserfs, quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Kill an unused extern entry form quota.h reiserfs: Remove VLA from fs/reiserfs/reiserfs.h udf: fix potential refcnt problem of nls module ext2: change return code to -ENOMEM when failing memory allocation udf: Do not mark possibly inconsistent filesystems as closed fsnotify: Let userspace know about lost events due to ENOMEM fanotify: Avoid lost events due to ENOMEM for unlimited queues udf: Remove never implemented mount options udf: Update mount option documentation udf: Provide saner default for invalid uid / gid udf: Clean up handling of invalid uid/gid udf: Apply uid/gid mount options also to new inodes & chown udf: Ignore [ug]id=ignore mount options udf: Fix handling of Partition Descriptors udf: Unify common handling of descriptors udf: Convert descriptor index definitions to enum udf: Allow volume descriptor sequence to be terminated by unrecorded block udf: Simplify handling of Volume Descriptor Pointers udf: Fix off-by-one in volume descriptor sequence length inotify: Extend ioctl to allow to request id of new watch descriptor
2018-04-02inotify: add do_inotify_init() helper; remove in-kernel call to syscallDominik Brodowski1-2/+7
Using the inotify-internal do_inotify_init() helper allows us to get rid of the in-kernel call to sys_inotify_init1() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Acked-by: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-02-27fsnotify: Let userspace know about lost events due to ENOMEMJan Kara1-1/+7
Currently if notification event is lost due to event allocation failing we ENOMEM, we just silently continue (except for fanotify permission events where we deny the access). This is undesirable as userspace has no way of knowing whether the notifications it got are complete or not. Treat lost events due to ENOMEM the same way as lost events due to queue overflow so that userspace knows something bad happened and it likely needs to rescan the filesystem. Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-14inotify: Extend ioctl to allow to request id of new watch descriptorKirill Tkhai1-0/+14
Watch descriptor is id of the watch created by inotify_add_watch(). It is allocated in inotify_add_to_idr(), and takes the numbers starting from 1. Every new inotify watch obtains next available number (usually, old + 1), as served by idr_alloc_cyclic(). CRIU (Checkpoint/Restore In Userspace) project supports inotify files, and restores watched descriptors with the same numbers, they had before dump. Since there was no kernel support, we had to use cycle to add a watch with specific descriptor id: while (1) { int wd; wd = inotify_add_watch(inotify_fd, path, mask); if (wd < 0) { break; } else if (wd == desired_wd_id) { ret = 0; break; } inotify_rm_watch(inotify_fd, wd); } (You may find the actual code at the below link: https://github.com/checkpoint-restore/criu/blob/v3.7/criu/fsnotify.c#L577) The cycle is suboptiomal and very expensive, but since there is no better kernel support, it was the only way to restore that. Happily, we had met mostly descriptors with small id, and this approach had worked somehow. But recent time containers with inotify with big watch descriptors begun to come, and this way stopped to work at all. When descriptor id is something about 0x34d71d6, the restoring process spins in busy loop for a long time, and the restore hungs and delay of migration from node to node could easily be watched. This patch aims to solve this problem. It introduces new ioctl INOTIFY_IOC_SETNEXTWD, which allows to request the number of next created watch descriptor from userspace. It simply calls idr_set_cursor() primitive to populate idr::idr_next, so that next idr_alloc_cyclic() allocation will return this id, if it is not occupied. This is the way which is used to restore some other resources from userspace. For example, /proc/sys/kernel/ns_last_pid works the same for task pids. The new code is under CONFIG_CHECKPOINT_RESTORE #define, so small system may exclude it. v2: Use INT_MAX instead of custom definition of max id, as IDR subsystem guarantees id is between 0 and INT_MAX. CC: Jan Kara <jack@suse.cz> CC: Matthew Wilcox <willy@infradead.org> CC: Andrew Morton <akpm@linux-foundation.org> CC: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27fs: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-14Merge branch 'fsnotify' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: - fixes of use-after-tree issues when handling fanotify permission events from Miklos - refcount_t conversions from Elena - fixes of ENOMEM handling in dnotify and fsnotify from me * 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: convert fsnotify_mark.refcnt from atomic_t to refcount_t fanotify: clean up CONFIG_FANOTIFY_ACCESS_PERMISSIONS ifdefs fsnotify: clean up fsnotify() fanotify: fix fsnotify_prepare_user_wait() failure fsnotify: fix pinning group in fsnotify_prepare_user_wait() fsnotify: pin both inode and vfsmount mark fsnotify: clean up fsnotify_prepare/finish_user_wait() fsnotify: convert fsnotify_group.refcnt from atomic_t to refcount_t fsnotify: Protect bail out path of fsnotify_add_mark_locked() properly dnotify: Handle errors from fsnotify_add_mark_locked() in fcntl_dirnotify()
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31fsnotify: convert fsnotify_mark.refcnt from atomic_t to refcount_tElena Reshetova1-2/+2
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable fsnotify_mark.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Move ->free_mark callback to fsnotify_opsJan Kara3-12/+14
Pointer to ->free_mark callback unnecessarily occupies one long in each fsnotify_mark although they are the same for all marks from one notification group. Move the callback pointer to fsnotify_ops. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Add group pointer in fsnotify_init_mark()Jan Kara1-3/+2
Currently we initialize mark->group only in fsnotify_add_mark_lock(). However we will need to access fsnotify_ops of corresponding group from fsnotify_put_mark() so we need mark->group initialized earlier. Do that in fsnotify_init_mark() which has a consequence that once fsnotify_init_mark() is called on a mark, the mark has to be destroyed by fsnotify_put_mark(). Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Remove fsnotify_find_{inode|vfsmount}_mark()Jan Kara1-1/+1
These are very thin wrappers, just remove them. Drop fs/notify/vfsmount_mark.c as it is empty now. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Remove fsnotify_recalc_{inode|vfsmount}_mask()Jan Kara1-1/+1
These helpers are just very thin wrappers now. Remove them. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Remove fsnotify_set_mark_{,ignored_}mask_locked()Jan Kara1-4/+2
These helpers are now only a simple assignment and just obfuscate what is going on. Remove them. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Pass fsnotify_iter_info into handle_event handlerJan Kara3-3/+5
Pass fsnotify_iter_info into ->handle_event() handler so that it can release and reacquire SRCU lock via fsnotify_prepare_user_wait() and fsnotify_finish_user_wait() functions. These functions also make sure current marks are appropriately pinned so that iteration protected by srcu in fsnotify() stays safe. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10fsnotify: Move queueing of mark for destruction into fsnotify_put_mark()Jan Kara1-2/+1
Currently we queue mark into a list of marks for destruction in __fsnotify_free_mark() and keep the last mark reference dangling. After the worker waits for SRCU period, it drops the last reference to the mark which frees it. This scheme has the disadvantage that if we hold reference to a mark and drop and reacquire SRCU lock, the mark can get freed immediately which is slightly inconvenient and we will need to avoid this in the future. Move to a scheme where queueing of mark into a list of marks for destruction happens when the last reference to the mark is dropped. Also drop reference to the mark held by group list already when mark is removed from that list instead of dropping it only from the destruction worker. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10inotify: Do not drop mark reference under idr_lockJan Kara1-18/+6
Dropping mark reference can result in mark being freed. Although it should not happen in inotify_remove_from_idr() since caller should hold another reference, just don't risk lock up just after WARN_ON unnecessarily. Also fold do_inotify_remove_from_idr() into the single callsite as that function really is just two lines of real code. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-03inotify: Remove inode pointers from debug messagesJan Kara2-17/+12
Printing inode pointers in warnings has dubious value and with future changes we won't be able to easily get them without either locking or chances we oops along the way. So just remove inode pointers from the warning messages. Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-24inotify: Convert to using per-namespace limitsNikolay Borisov3-21/+36
This patchset converts inotify to using the newly introduced per-userns sysctl infrastructure. Currently the inotify instances/watches are being accounted in the user_struct structure. This means that in setups where multiple users in unprivileged containers map to the same underlying real user (i.e. pointing to the same user_struct) the inotify limits are going to be shared as well, allowing one user(or application) to exhaust all others limits. Fix this by switching the inotify sysctls to using the per-namespace/per-user limits. This will allow the server admin to set sensible global limits, which can further be tuned inside every individual user namespace. Additionally, in order to preserve the sysctl ABI make the existing inotify instances/watches sysctls modify the values of the initial user namespace. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-12-05fsnotify: constify 'data' passed to ->handle_event()Al Viro2-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-07fsnotify: convert notification_mutex to a spinlockJan Kara1-8/+8
notification_mutex is used to protect the list of pending events. As such there's no reason to use a sleeping lock for it. Convert it to a spinlock. [jack@suse.cz: fixed version] Link: http://lkml.kernel.org/r/1474031567-1831-1-git-send-email-jack@suse.cz Link: http://lkml.kernel.org/r/1473797711-14111-5-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05inotify: actually check for invalid bits in sys_inotify_add_watch()Dave Hansen1-1/+13
The comment here says that it is checking for invalid bits. But, the mask is *actually* checking to ensure that _any_ valid bit is set, which is quite different. Without this check, an unexpected bit could get set on an inotify object. Since these bits are also interpreted by the fsnotify/dnotify code, there is the potential for an object to be mishandled inside the kernel. For instance, can we be sure that setting the dnotify flag FS_DN_RENAME on an inotify watch is harmless? Add the actual check which was intended. Retain the existing inotify bits are being added to the watch. Plus, this is existing behavior which would be nice to preserve. I did a quick sniff test that inotify functions and that my 'inotify-tools' package passes 'make check'. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-16fs/notify: don't use module_init for non-modular inotify_user codePaul Gortmaker1-2/+2
The INOTIFY_USER option is bool, and hence this code is either present or absent. It will never be modular, so using module_init as an alias for __initcall is rather misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of fs_initcall (which makes sense for fs code) will thus change this registration from level 6-device to level 5-fs (i.e. slightly earlier). However no observable impact of that small difference has been observed during testing, or is expected. Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2014-12-13fsnotify: unify inode and mount marks handlingJan Kara2-6/+6
There's a lot of common code in inode and mount marks handling. Factor it out to a common helper function. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-28sched, inotify: Deal with nested sleepsPeter Zijlstra1-5/+4
inotify_read is a wait loop with sleeps in. Wait loops rely on task_struct::state and sleeps do too, since that's the only means of actually sleeping. Therefore the nested sleeps destroy the wait loop state and the wait loop breaks the sleep functions that assume TASK_RUNNING (mutex_lock). Fix this by using the new woken_wake_function and wait_woken() stuff, which registers wakeups in wait and thereby allows shrinking the task_state::state changes to the actual sleep part. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tglx@linutronix.de Cc: ilya.dryomov@inktank.com Cc: umgwanakikbuti@gmail.com Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20140924082242.254858080@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-09fsnotify: don't put user context if it was never assignedSasha Levin1-2/+4
On some failure paths we may attempt to free user context even if it wasn't assigned yet. This will cause a NULL ptr deref and a kernel BUG. The path I was looking at is in inotify_new_group(): oevent = kmalloc(sizeof(struct inotify_event_info), GFP_KERNEL); if (unlikely(!oevent)) { fsnotify_destroy_group(group); return ERR_PTR(-ENOMEM); } fsnotify_destroy_group() would get called here, but group->inotify_data.user is only getting assigned later: group->inotify_data.user = get_current_user(); Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06fsnotify: rename event handling functionsJan Kara2-3/+3
Rename fsnotify_add_notify_event() to fsnotify_add_event() since the "notify" part is duplicit. Rename fsnotify_remove_notify_event() and fsnotify_peek_notify_event() to fsnotify_remove_first_event() and fsnotify_peek_first_event() respectively since "notify" part is duplicit and they really look at the first event in the queue. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>