| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull nfsd updates from Chuck Lever:
"This release introduces support for the CB_RECALL_ANY operation. NFSD
can send this operation to request that clients return any delegations
they choose. The server uses this operation to handle low memory
scenarios or indicate to a client when that client has reached the
maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily whilst
support for sparse files in local filesystems and the VFS is improved.
Two major data structure fixes appear in this release:
- The nfs4_file hash table is replaced with a resizable hash table to
reduce the latency of NFSv4 OPEN operations.
- Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2 to
be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree"
* tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (49 commits)
NFSD: Avoid clashing function prototypes
SUNRPC: Fix crasher in unwrap_integ_data()
SUNRPC: Make the svc_authenticate tracepoint conditional
NFSD: Use only RQ_DROPME to signal the need to drop a reply
SUNRPC: Clean up xdr_write_pages()
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
NFSD: add CB_RECALL_ANY tracepoints
NFSD: add delegation reaper to react to low memory condition
NFSD: add support for sending CB_RECALL_ANY
NFSD: refactoring courtesy_client_reaper to a generic low memory shrinker
trace: Relocate event helper files
NFSD: pass range end to vfs_fsync_range() instead of count
lockd: fix file selection in nlmsvc_cancel_blocked
lockd: ensure we use the correct file descriptor when unlocking
lockd: set missing fl_flags field when retrieving args
NFSD: Use struct_size() helper in alloc_session()
nfsd: return error if nfs4_setacl fails
lockd: set other missing fields when unlocking files
NFSD: Add an nfsd_file_fsync tracepoint
sunrpc: svc: Remove an unused static function svc_ungetu32()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull VFS acl updates from Christian Brauner:
"This contains the work that builds a dedicated vfs posix acl api.
The origins of this work trace back to v5.19 but it took quite a while
to understand the various filesystem specific implementations in
sufficient detail and also come up with an acceptable solution.
As we discussed and seen multiple times the current state of how posix
acls are handled isn't nice and comes with a lot of problems: The
current way of handling posix acls via the generic xattr api is error
prone, hard to maintain, and type unsafe for the vfs until we call
into the filesystem's dedicated get and set inode operations.
It is already the case that posix acls are special-cased to death all
the way through the vfs. There are an uncounted number of hacks that
operate on the uapi posix acl struct instead of the dedicated vfs
struct posix_acl. And the vfs must be involved in order to interpret
and fixup posix acls before storing them to the backing store, caching
them, reporting them to userspace, or for permission checking.
Currently a range of hacks and duct tape exist to make this work. As
with most things this is really no ones fault it's just something that
happened over time. But the code is hard to understand and difficult
to maintain and one is constantly at risk of introducing bugs and
regressions when having to touch it.
Instead of continuing to hack posix acls through the xattr handlers
this series builds a dedicated posix acl api solely around the get and
set inode operations.
Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
helpers must be used in order to interact with posix acls. They
operate directly on the vfs internal struct posix_acl instead of
abusing the uapi posix acl struct as we currently do. In the end this
removes all of the hackiness, makes the codepaths easier to maintain,
and gets us type safety.
This series passes the LTP and xfstests suites without any
regressions. For xfstests the following combinations were tested:
- xfs
- ext4
- btrfs
- overlayfs
- overlayfs on top of idmapped mounts
- orangefs
- (limited) cifs
There's more simplifications for posix acls that we can make in the
future if the basic api has made it.
A few implementation details:
- The series makes sure to retain exactly the same security and
integrity module permission checks. Especially for the integrity
modules this api is a win because right now they convert the uapi
posix acl struct passed to them via a void pointer into the vfs
struct posix_acl format to perform permission checking on the mode.
There's a new dedicated security hook for setting posix acls which
passes the vfs struct posix_acl not a void pointer. Basing checking
on the posix acl stored in the uapi format is really unreliable.
The vfs currently hacks around directly in the uapi struct storing
values that frankly the security and integrity modules can't
correctly interpret as evidenced by bugs we reported and fixed in
this area. It's not necessarily even their fault it's just that the
format we provide to them is sub optimal.
- Some filesystems like 9p and cifs need access to the dentry in
order to get and set posix acls which is why they either only
partially or not even at all implement get and set inode
operations. For example, cifs allows setxattr() and getxattr()
operations but doesn't allow permission checking based on posix
acls because it can't implement a get acl inode operation.
Thus, this patch series updates the set acl inode operation to take
a dentry instead of an inode argument. However, for the get acl
inode operation we can't do this as the old get acl method is
called in e.g., generic_permission() and inode_permission(). These
helpers in turn are called in various filesystem's permission inode
operation. So passing a dentry argument to the old get acl inode
operation would amount to passing a dentry to the permission inode
operation which we shouldn't and probably can't do.
So instead of extending the existing inode operation Christoph
suggested to add a new one. He also requested to ensure that the
get and set acl inode operation taking a dentry are consistently
named. So for this version the old get acl operation is renamed to
->get_inode_acl() and a new ->get_acl() inode operation taking a
dentry is added. With this we can give both 9p and cifs get and set
acl inode operations and in turn remove their complex custom posix
xattr handlers.
In the future I hope to get rid of the inode method duplication but
it isn't like we have never had this situation. Readdir is just one
example. And frankly, the overall gain in type safety and the more
pleasant api wise are simply too big of a benefit to not accept
this duplication for a while.
- We've done a full audit of every codepaths using variant of the
current generic xattr api to get and set posix acls and
surprisingly it isn't that many places. There's of course always a
chance that we might have missed some and if so I'm sure we'll find
them soon enough.
The crucial codepaths to be converted are obviously stacking
filesystems such as ecryptfs and overlayfs.
For a list of all callers currently using generic xattr api helpers
see [2] including comments whether they support posix acls or not.
- The old vfs generic posix acl infrastructure doesn't obey the
create and replace semantics promised on the setxattr(2) manpage.
This patch series doesn't address this. It really is something we
should revisit later though.
The patches are roughly organized as follows:
(1) Change existing set acl inode operation to take a dentry
argument (Intended to be a non-functional change)
(2) Rename existing get acl method (Intended to be a non-functional
change)
(3) Implement get and set acl inode operations for filesystems that
couldn't implement one before because of the missing dentry.
That's mostly 9p and cifs (Intended to be a non-functional
change)
(4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
and vfs_set_acl() including security and integrity hooks
(Intended to be a non-functional change)
(5) Implement get and set acl inode operations for stacking
filesystems (Intended to be a non-functional change)
(6) Switch posix acl handling in stacking filesystems to new posix
acl api now that all filesystems it can stack upon support it.
(7) Switch vfs to new posix acl api (semantical change)
(8) Remove all now unused helpers
(9) Additional regression fixes reported after we merged this into
linux-next
Thanks to Seth for a lot of good discussion around this and
encouragement and input from Christoph"
* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
posix_acl: Fix the type of sentinel in get_acl
orangefs: fix mode handling
ovl: call posix_acl_release() after error checking
evm: remove dead code in evm_inode_set_acl()
cifs: check whether acl is valid early
acl: make vfs_posix_acl_to_xattr() static
acl: remove a slew of now unused helpers
9p: use stub posix acl handlers
cifs: use stub posix acl handlers
ovl: use stub posix acl handlers
ecryptfs: use stub posix acl handlers
evm: remove evm_xattr_acl_change()
xattr: use posix acl api
ovl: use posix acl api
ovl: implement set acl method
ovl: implement get acl method
ecryptfs: implement set acl method
ecryptfs: implement get acl method
ksmbd: use vfs_remove_acl()
acl: add vfs_remove_acl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
NFSv4 operations manage the lifetime of nfsd_file items they use by
means of NFSv4 OPEN and CLOSE. Hence there's no need for them to be
garbage collected.
Introduce a mechanism to enable garbage collection for nfsd_file
items used only by NFSv2/3 callers.
Note that the change in nfsd_file_put() ensures that both CLOSE and
DELEGRETURN will actually close out and free an nfsd_file on last
reference of a non-garbage-collected file.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=394
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
In a moment I'm going to introduce separate nfsd_file types, one of
which is garbage-collected; the other, not. The garbage-collected
variety is to be used by NFSv2 and v3, and the non-garbage-collected
variety is to be used by NFSv4.
nfsd_commit() is invoked by both NFSv3 and NFSv4 consumers. We want
nfsd_commit() to find and use the correct variety of cached
nfsd_file object for the NFS version that is in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
|
|
nfserrno() is common to all nfs versions, but nfsproc.c is specifically
for NFSv2. Move it to vfs.c, and the prototype to vfs.h.
While we're in here, remove the #ifdef EDQUOT check in this function.
It's apparently a holdover from the initial merge of the nfsd code in
1997. No other place in the kernel checks that that symbol is defined
before using it, so I think we can dispense with it here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Variable host_err is assigned a value that is never read, it is being
re-assigned a value in every different execution path in the following
switch statement. The assignment is redundant and can be removed.
Cleans up clang-scan warning:
warning: Value stored to 'host_err' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull vfs fix from Al Viro:
"Amir's copy_file_range() fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: fix copy_file_range() averts filesystem freeze protection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix rare data corruption on READ operations
* tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix reads with a non-zero offset that don't end on a page boundary
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This was found when virtual machines with nfs-mounted qcow2 disks
failed to boot properly.
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142132
Fixes: bfbfb6182ad1 ("nfsd_splice_actor(): handle compound pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.
Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().
As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Pull vfs file updates from Al Viro:
"struct file-related stuff"
* tag 'pull-file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
dma_buf_getfile(): don't bother with ->f_flags reassignments
Change calling conventions for filldir_t
locks: fix TOCTOU race when granting write lease
|
|
nfsd_unlink() can kick off a CB_RECALL (via
vfs_unlink() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_unlink()
again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
nfsd_rename() can kick off a CB_RECALL (via
vfs_rename() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_rename()
again, once.
This version of the patch handles renaming an existing file,
but does not deal with renaming onto an existing file. That
case will still always trigger an NFS4ERR_DELAY.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
nfsd_setattr() can kick off a CB_RECALL (via
notify_change() -> break_lease()) if a delegation is present. Before
returning NFS4ERR_DELAY, give the client holding that delegation a
chance to return it and then retry the nfsd_setattr() again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
Move code that will be retried (in a subsequent patch) into a helper
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
nfsd_create_locked() does not use the "fname" and "flen" arguments, so
drop them from declaration and all callers.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull iov_iter fix from Al Viro:
"Fix for a nfsd regression caused by the iov_iter stuff this window"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd_splice_actor(): handle compound pages
|
|
pipe_buffer might refer to a compound page (and contain more than a PAGE_SIZE
worth of data). Theoretically it had been possible since way back, but
nfsd_splice_actor() hadn't run into that until copy_page_to_iter() change.
Fortunately, the only thing that changes for compound pages is that we
need to stuff each relevant subpage in and convert the offset into offset
in the first subpage.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: f0f6b614f83d "copy_page_to_iter(): don't split high-order page in case of ITER_PIPE"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A recent patch moved ACL setting into nfsd_setattr().
Unfortunately it didn't work as nfsd_setattr() aborts early if
iap->ia_valid is 0.
Remove this test, and instead avoid calling notify_change() when
ia_valid is 0.
This means that nfsd_setattr() will now *always* lock the inode.
Previously it didn't if only a ATTR_MODE change was requested on a
symlink (see Commit 15b7a1b86d66 ("[PATCH] knfsd: fix setattr-on-symlink
error return")). I don't think this change really matters.
Fixes: c0cbe70742f4 ("NFSD: add posix ACLs to struct nfsd_attrs")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop". Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).
So let's just return bool ("should we keep going?") - it's less confusing
that way. The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
do something for everything in directory, until we run into problem
and
find an entry in directory and do something to it.
The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.
"true means stop" would be more natural for the second group; "true
means keep going" - for the first one. I tried both variants and
the things like
if allocation failed
something = -ENOMEM;
return true;
just looked unnatural and asking for trouble.
[folded suggestion from Matthew Wilcox <willy@infradead.org>]
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
As all inode locking is now fully balanced, fh_put() does not need to
call fh_unlock().
fh_lock() and fh_unlock() are no longer used, so discard them.
These are the only real users of ->fh_locked, so discard that too.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When locking a file to access ACLs and xattrs etc, use explicit locking
with inode_lock() instead of fh_lock(). This means that the calls to
fh_fill_pre/post_attr() are also explicit which improves readability and
allows us to place them only where they are needed. Only the xattr
calls need pre/post information.
When locking a file we don't need I_MUTEX_PARENT as the file is not a
parent of anything, so we can use inode_lock() directly rather than the
inode_lock_nested() call that fh_lock() uses.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When creating or unlinking a name in a directory use explicit
inode_lock_nested() instead of fh_lock(), and explicit calls to
fh_fill_pre_attrs() and fh_fill_post_attrs(). This is already done
for renames, with lock_rename() as the explicit locking.
Also move the 'fill' calls closer to the operation that might change the
attributes. This way they are avoided on some error paths.
For the v2-only code in nfsproc.c, the fill calls are not replaced as
they aren't needed.
Making the locking explicit will simplify proposed future changes to
locking for directories. It also makes it easily visible exactly where
pre/post attributes are used - not all callers of fh_lock() actually
need the pre/post attributes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_lookup() takes an exclusive lock on the parent inode, but no
callers want the lock and it may not be needed at all if the
result is in the dcache.
Change nfsd_lookup_dentry() to not take the lock, and call
lookup_one_len_locked() which takes lock only if needed.
nfsd4_open() currently expects the lock to still be held, but that isn't
necessary as nfsd_validate_delegated_dentry() provides required
guarantees without the lock.
NOTE: NFSv4 requires directory changeinfo for OPEN even when a create
wasn't requested and no change happened. Now that nfsd_lookup()
doesn't use fh_lock(), we need to explicitly fill the attributes
when no create happens. A new fh_fill_both_attrs() is provided
for that task.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
On non-error paths, nfsd_link() calls fh_unlock() twice. This is safe
because fh_unlock() records that the unlock has been done and doesn't
repeat it.
However it makes the code a little confusing and interferes with changes
that are planned for directory locking.
So rearrange the code to ensure fh_unlock() is called exactly once if
fh_lock() was called.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Some error paths in nfsd_unlink() allow it to exit without unlocking the
directory. This is not a problem in practice as the directory will be
locked with an fh_put(), but it is untidy and potentially confusing.
This allows us to remove all the fh_unlock() calls that are immediately
after nfsd_unlink() calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_create() usually returns with the directory still locked.
nfsd_symlink() usually returns with it unlocked. This is clumsy.
Until recently nfsd_create() needed to keep the directory locked until
ACLs and security label had been set. These are now set inside
nfsd_create() (in nfsd_setattr()) so this need is gone.
So change nfsd_create() and nfsd_symlink() to always unlock, and remove
any fh_unlock() calls that follow calls to these functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
pacl and dpacl pointers are added to struct nfsd_attrs, which requires
that we have an nfsd_attrs_free() function to free them.
Those nfsv4 functions that can set ACLs now set up these pointers
based on the passed in NFSv4 ACL.
nfsd_setattr() sets the acls as appropriate.
Errors are handled as with security labels.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_setattr() now sets a security label if provided, and nfsv4 provides
it in the 'open' and 'create' paths and the 'setattr' path.
If setting the label failed (including because the kernel doesn't
support labels), an error field in 'struct nfsd_attrs' is set, and the
caller can respond. The open/create callers clear
FATTR4_WORD2_SECURITY_LABEL in the returned attr set in this case.
The setattr caller returns the error.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The NFS protocol includes attributes when creating symlinks.
Linux does store attributes for symlinks and allows them to be set,
though they are not used for permission checking.
NFSD currently doesn't set standard (struct iattr) attributes when
creating symlinks, but for NFSv4 it does set ACLs and security labels.
This is inconsistent.
To improve consistency, pass the provided attributes into nfsd_symlink()
and call nfsd_create_setattr() to set them.
NOTE: this results in a behaviour change for all NFS versions when the
client sends non-default attributes with a SYMLINK request. With the
Linux client, the only attributes are:
attr.ia_mode = S_IFLNK | S_IRWXUGO;
attr.ia_valid = ATTR_MODE;
so the final outcome will be unchanged. Other clients might sent
different attributes, and if they did they probably expect them to be
honoured.
We ignore any error from nfsd_create_setattr(). It isn't really clear
what should be done if a file is successfully created, but the
attributes cannot be set. NFS doesn't allow partial success to be
reported. Reporting failure is probably more misleading than reporting
success, so the status is ignored.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The attributes that nfsd might want to set on a file include 'struct
iattr' as well as an ACL and security label.
The latter two are passed around quite separately from the first, in
part because they are only needed for NFSv4. This leads to some
clumsiness in the code, such as the attributes NOT being set in
nfsd_create_setattr().
We need to keep the directory locked until all attributes are set to
ensure the file is never visibile without all its attributes. This need
combined with the inconsistent handling of attributes leads to more
clumsiness.
As a first step towards tidying this up, introduce 'struct nfsd_attrs'.
This is passed (by reference) to vfs.c functions that work with
attributes, and is assembled by the various nfs*proc functions which
call them. As yet only iattr is included, but future patches will
expand this.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:
- Fix NFSD crash during NFSv4.2 READ_PLUS operation
- Fix incorrect status code returned by COMMIT operation"
* tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix READ_PLUS crasher
NFSD: restore EINVAL error translation in nfsd_commit()
|
|
A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.
Before commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems. After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.
Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.
Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().
This patch restores some cross-filesystem copy restrictions that existed
prior to commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().
Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user. Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e. nfsv3).
Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb. This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().
nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.
fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.
Fixes: 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: 64bf5ff58dff ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t")
incidentally broke translation of -EINVAL to nfserr_notsupp.
The patch restores that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Its only caller always passes S_IFREG as the @type parameter. As an
additional clean-up, add a kerneldoc comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that its two callers have their own version-specific instance of
this function, do_nfsd_create() is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I'd like to move do_nfsd_create() out of vfs.c. Therefore
nfsd_create_setattr() needs to be made publicly visible.
Note that both call sites in vfs.c commit both the new object and
its parent directory, so just combine those common metadata commits
into nfsd_create_setattr().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: The "out" label already invokes fh_drop_write().
Note that fh_drop_write() is already careful not to invoke
mnt_drop_write() if either it has already been done or there is
nothing to drop. Therefore no change in behavior is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd_splice_actor() checks that the page being spliced does not
match the previous element in the svc_rqst::rq_pages array. We
believe this is to prevent a double put_page() in cases where the
READ payload is partially contained in the xdr_buf's head buffer.
However, the NFSD READ proc functions no longer place any part of
the READ payload in the head buffer, in order to properly support
NFS/RDMA READ with Write chunks. Therefore, simplify the logic in
nfsd_splice_actor() to remove this unnecessary check.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
These functions are page cache functionality and don't need to be
declared in fs.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.
However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set. Before NFSv2 support can be removed,
we need to choose a different "always supported" version.
This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.
The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since, well, forever, the Linux NFS server's nfsd_commit() function
has returned nfserr_inval when the passed-in byte range arguments
were non-sensical.
However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests
are permitted to return only the following non-zero status codes:
NFS3ERR_IO
NFS3ERR_STALE
NFS3ERR_BADHANDLE
NFS3ERR_SERVERFAULT
NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL
is not listed in the COMMIT row of Table 6 in RFC 8881.
RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not
specify when it can or should be used.
Instead of dropping or failing a COMMIT request in a byte range that
is not supported, turn it into a valid request by treating one or
both arguments as zero. Offset zero means start-of-file, count zero
means until-end-of-file, so we only ever extend the commit range.
NFS servers are always allowed to commit more and sooner than
requested.
The range check is no longer bounded by NFS_OFFSET_MAX, but rather
by the value that is returned in the maxfilesize field of the NFSv3
FSINFO procedure or the NFSv4 maxfilesize file attribute.
Note that this change results in a new pynfs failure:
CMT4 st_commit.testCommitOverflow : RUNNING
CMT4 st_commit.testCommitOverflow : FAILURE
COMMIT with offset + count overflow should return
NFS4ERR_INVAL, instead got NFS4_OK
IMO the test is not correct as written: RFC 8881 does not allow the
COMMIT operation to return NFS4ERR_INVAL.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
|
|
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These functions are related to file handle processing and have
nothing to do with XDR encoding or decoding. Also they are no longer
NFSv3-specific. As a clean-up, move their definitions to a more
appropriate location. WCC is also an NFSv3-specific term, so rename
them as general-purpose helpers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
According to commit bbf2f098838a ("nfsd: Reset the boot verifier on
all write I/O errors"), the Linux NFS server forces all clients to
resend pending unstable writes if any server-side write or commit
operation encounters an error (say, ENOSPC). This is a rare and
quite exceptional event that could require administrative recovery
action, so it should be made trace-able. Example trace event:
nfsd-938 [002] 7174.945558: nfsd_writeverf_reset: boot_time= 61cc920d xid=0xdcd62036 error=-28 new verifier=0x08aecc6142515904
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: These functions handle what the specs call a write
verifier, which in the Linux NFS server implementation is now
divorced from the server's boot instance
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
