summaryrefslogtreecommitdiffstats
path: root/fs/nfs/nfs4super.c
AgeCommit message (Collapse)AuthorFilesLines
2015-04-23NFS: Move nfs_idmap.h into fs/nfs/Anna Schumaker1-1/+1
This file is only used internally to the NFS v4 module, so it doesn't need to be in the global include path. I also renamed it from nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-03-27NFSv4: Return the delegation before returning the layout in evict_inode()Trond Myklebust1-2/+3
Minor optimisation for the case where the layout has return-on-close enabled. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-12Merge branch 'for-3.20/bdi' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull backing device changes from Jens Axboe: "This contains a cleanup of how the backing device is handled, in preparation for a rework of the life time rules. In this part, the most important change is to split the unrelated nommu mmap flags from it, but also removing a backing_dev_info pointer from the address_space (and inode), and a cleanup of other various minor bits. Christoph did all the work here, I just fixed an oops with pages that have a swap backing. Arnd fixed a missing export, and Oleg killed the lustre backing_dev_info from staging. Last patch was from Al, unexporting parts that are now no longer needed outside" * 'for-3.20/bdi' of git://git.kernel.dk/linux-block: Make super_blocks and sb_lock static mtd: export new mtd_mmap_capabilities fs: make inode_to_bdi() handle NULL inode staging/lustre/llite: get rid of backing_dev_info fs: remove default_backing_dev_info fs: don't reassign dirty inodes to default_backing_dev_info nfs: don't call bdi_unregister ceph: remove call to bdi_unregister fs: remove mapping->backing_dev_info fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info nilfs2: set up s_bdi like the generic mount_bdev code block_dev: get bdev inode bdi directly from the block device block_dev: only write bdev inode on close fs: introduce f_op->mmap_capabilities for nommu mmap support fs: kill BDI_CAP_SWAP_BACKED fs: deduplicate noop_backing_dev_info
2015-02-03nfs41: create NFSv3 DS connection if specifiedPeng Tao1-0/+3
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-01-20nfs: don't call bdi_unregisterChristoph Hellwig1-1/+0
bdi_destroy already does all the work, and if we delay freeing the anon bdev we can get away with just that single call. Addintionally remove the call during mount failure, as deactivate_super_locked will already call ->kill_sb and clean up the bdi for us. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-03mm + fs: store shadow entries in page cacheJohannes Weiner1-1/+1
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-13NFSv4.1: Fix a race in nfs4_write_inodeTrond Myklebust1-11/+3
nfs4_write_inode() must not be allowed to exit until the layoutcommit is done. That means that both NFS_INO_LAYOUTCOMMIT and NFS_INO_LAYOUTCOMMITTING have to be cleared. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-10-28nfs: Use PTR_ERR_OR_ZERO in 'nfs/nfs4super.c'Geyslan G. Bem1-6/+6
Use 'PTR_ERR_OR_ZERO()' rather than 'IS_ERR(...) ? PTR_ERR(...) : 0'. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-07NFSv4: Fix security auto-negotiationTrond Myklebust1-4/+0
NFSv4 security auto-negotiation has been broken since commit 4580a92d44e2b21c2254fa5fef0f1bfb43c82318 (NFS: Use server-recommended security flavor by default (NFSv3)) because nfs4_try_mount() will automatically select AUTH_SYS if it sees no auth flavours. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com>
2013-09-07NFS: Clean up the auth flavour array messTrond Myklebust1-1/+3
What is the point of having a 'auth_flavor_len' field, if it is always set to 1, and can't be used to determine if the user has selected an auth flavour? This cleanup goes back to using auth_flavor_len for its original intended purpose, and gets rid of the ad-hoc replacements. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-18NFSv4: Move the DNS resolver into the NFSv4 moduleTrond Myklebust1-3/+11
The other protocols don't use it, so make it local to NFSv4, and remove the EXPORT. Also ensure that we only compile in cache_lib.o if we're using the legacy DNS resolver. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Bryan Schumaker <bjschuma@netapp.com>
2013-04-04NFS: Use server-recommended security flavor by default (NFSv3)Chuck Lever1-0/+2
Since commit ec88f28d in 2009, checking if the user-specified flavor is in the server's flavor list has been the source of a few noticeable regressions (now fixed), but there is one that is still vexing. An NFS server can list AUTH_NULL in its flavor list, which suggests a client should try to mount the server with the flavor of the client's choice, but the server will squash all accesses. In some cases, our client fails to mount a server because of this check, when the mount could have proceeded successfully. Skip this check if the user has specified "sec=" on the mount command line. But do consult the server-provided flavor list to choose a security flavor if no sec= option is specified on the mount command. If a server lists Kerberos pseudoflavors before "sys" in its export options, our client now chooses Kerberos over AUTH_UNIX for mount points, when no security flavor is specified by the mount command. This could be surprising to some administrators or users, who would then need to have Kerberos credentials to access the export. Or, a client administrator may not have enabled rpc.gssd. In this case, auth_rpcgss.ko might still be loadable, which is enough for the new logic to choose Kerberos over AUTH_UNIX. But the mount would fail since no GSS context can be created without rpc.gssd running. To retain the use of AUTH_UNIX by default: o The server administrator can ensure that "sys" is listed before Kerberos flavors in its export security options (see exports(5)), o The client administrator can explicitly specify "sec=sys" on its mount command line (see nfs(5)), o The client administrator can use "Sec=sys" in an appropriate section of /etc/nfsmount.conf (see nfsmount.conf(5)), or o The client administrator can blacklist auth_rpcgss.ko. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-26vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry opJeff Layton1-3/+3
The following set of operations on a NFS client and server will cause server# mkdir a client# cd a server# mv a a.bak client# sleep 30 # (or whatever the dir attrcache timeout is) client# stat . stat: cannot stat `.': Stale NFS file handle Obviously, we should not be getting an ESTALE error back there since the inode still exists on the server. The problem is that the lookup code will call d_revalidate on the dentry that "." refers to, because NFS has FS_REVAL_DOT set. nfs_lookup_revalidate will see that the parent directory has changed and will try to reverify the dentry by redoing a LOOKUP. That of course fails, so the lookup code returns ESTALE. The problem here is that d_revalidate is really a bad fit for this case. What we really want to know at this point is whether the inode is still good or not, but we don't really care what name it goes by or whether the dcache is still valid. Add a new d_op->d_weak_revalidate operation and have complete_walk call that instead of d_revalidate. The intent there is to allow for a "weaker" d_revalidate that just checks to see whether the inode is still good. This is also gives us an opportunity to kill off the FS_REVAL_DOT special casing. [AV: changed method name, added note in porting, fixed confusion re having it possibly called from RCU mode (it won't be)] Cc: NeilBrown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14NFS: Ensure that we always drop inodes that have been marked as staleTrond Myklebust1-0/+1
There is no need to cache stale inodes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-08-16NFS: Fix a regression when loading the NFS v4 modulebjschuma@gmail.com1-15/+0
Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias pointing to nfs.ko, rather than nfs4.ko. This can prevent the v4 module from loading on mount, since the kernel sees that something named "nfs4" has already been loaded. To work around this, I've renamed the modules to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko". I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount -t nfs4` still works. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Convert v4 into a moduleBryan Schumaker1-2/+7
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Split out remaining NFS v4 inode functionsBryan Schumaker1-0/+39
Somehow I missed this in my previous patch series, but these functions are only needed by the v4 code and should be moved to a v4-only file. I wasn't exactly sure where I should put these functions, so I moved them into nfs4super.c where I could make them static. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Pass super operations and xattr handlers in the nfs_subversionBryan Schumaker1-21/+3
I can set all variables in the nfs_fill_super() function, allowing me to remove the nfs4_fill_super() function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Only initialize the ACL client in the v3 caseBryan Schumaker1-1/+1
v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to initialize the ACL client only when we are using v3. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Create a try_mount rpc opBryan Schumaker1-1/+2
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have easy access to rpc_ops that used to be difficult to reach. This allows me to set up a different mount path for NFS v2/3 and NFS v4. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Remove the NFS v4 xdev mount functionBryan Schumaker1-25/+0
I can now share this code with the v2 and v3 code by using the NFS subversion structure. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30NFS: Add version registering frameworkBryan Schumaker1-2/+12
This patch adds in the code to track multiple versions of the NFS protocol. I created default structures for v2, v3 and v4 so that each version can continue to work while I convert them into kernel modules. I also removed the const parameter from the rpc_version array so that I can change it at runtime. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: exit_nfs_v4() shouldn't be an __exit functionBryan Schumaker1-1/+1
... yet. Right now, init_nfs() is calling this function if an error is encountered when loading the nfs module. An __exit function can't be called from one declared as __init. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Split out the NFS v4 filesystem typesBryan Schumaker1-0/+328
This allows me to move the v4 mounting and unmounting functions out of the generic client and into a file that is only compiled when CONFIG_NFS_V4 is enabled. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Initialize v4 sysctls from nfs_init_v4()Bryan Schumaker1-0/+9
And split them out of the generic client into their own file. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Create an init_nfs_v4() functionBryan Schumaker1-0/+23
I want to initialize all of NFS v4 in a single function that will eventually be used as the v4 module init function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>