summaryrefslogtreecommitdiffstats
path: root/fs/nfs/nfs4session.h
AgeCommit message (Collapse)AuthorFilesLines
2016-09-27NFSv4.1: Don't deadlock the state manager on the SEQUENCE status flagsTrond Myklebust1-0/+1
As described in RFC5661, section 18.46, some of the status flags exist in order to tell the client when it needs to acknowledge the existence of revoked state on the server and/or to recover state. Those flags will then remain set until the recovery procedure is done. In order to avoid looping, the client therefore needs to ignore those particular flags while recovering. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFSv4.x: Add kernel parameter to control the callback serverTrond Myklebust1-0/+1
Add support for the kernel parameter nfs.callback_nr_threads to set the number of threads that will be assigned to the callback channel. Add support for the kernel parameter nfs.nfs.max_session_cb_slots to set the maximum size of the callback channel slot table. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-08-28NFSv4.1: Defer bumping the slot sequence number until we free the slotTrond Myklebust1-1/+2
For operations like OPEN or LAYOUTGET, which return recallable state (i.e. delegations and layouts) we want to enable the mechanism for resolving recall races in RFC5661 Section 2.10.6.3. To do so, we will want to defer bumping the slot's sequence number until we have finished processing the RPC results. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-08-28NFSv4.1: Delay callback processing when there are referring triplesTrond Myklebust1-1/+4
If CB_SEQUENCE tells us that the processing of this request depends on the completion of one or more referring triples (see RFC 5661 Section 2.10.6.3), delay the callback processing until after the RPC requests being referred to have completed. If we end up delaying for more than 1/2 second, then fall back to returning NFS4ERR_DELAY in reply to the callback. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-08-28NFSv4.1: Fix Oopsable condition in server callback racesTrond Myklebust1-0/+1
The slot table hasn't been an array since v3.7. Ensure that we use nfs4_lookup_slot() to access the slot correctly. Fixes: 87dda67e7386 ("NFSv4.1: Allow SEQUENCE to resize the slot table...") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v3.8+
2016-01-25NFSv4.x: Allow multiple callbacks in flightTrond Myklebust1-0/+8
Hook the callback channel into the same session management machinery as we use for the forward channel. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-03-03NFSv4.1: Clear the old state by our client id before establishing a new leaseTrond Myklebust1-0/+1
If the call to exchange-id returns with the EXCHGID4_FLAG_CONFIRMED_R flag set, then that means our lease was established by a previous mount instance. Ensure that we detect this situation, and that we clear the state held by that mount. Reported-by: Jorge Mora <Jorge.Mora@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-18NFSv4.1: Clean up create_sessionTrond Myklebust1-0/+6
Don't decode directly into the shared struct session Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-02-01NFSv4.1: nfs4_destroy_session must call rpc_destroy_waitqueueTrond Myklebust1-1/+1
There may still be timers active on the session waitqueues. Make sure that we kill them before freeing the memory. Cc: stable@vger.kernel.org # 3.12+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-09-04When CONFIG_NFS_V4_1 is not enabled, "make C=2" emits this warning:Chuck Lever1-3/+3
linux/fs/nfs/nfs4session.c:337:6: warning: symbol 'nfs41_set_target_slotid' was not declared. Should it be static? Move nfs41_set_target_slotid() and nfs41_update_target_slotid() back behind CONFIG_NFS_V4_1, since, in the final revision of this work, they are used only in NFSv4.1 and later. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-03NFS: Add global helper for releasing slot table resourcesChuck Lever1-0/+1
The nfs4_destroy_slot_tables() function is renamed to avoid confusion with the new helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-03NFS: Add global helper to set up a stand-along nfs4_slot_tableChuck Lever1-0/+2
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-03NFS: Enable slot table helpers for NFSv4.0Chuck Lever1-15/+13
I'd like to re-use NFSv4.1's slot table machinery for NFSv4.0 transport blocking. Re-organize some of nfs4session.c so the slot table code is built even when NFS_V4_1 is disabled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22NFSv4.1: Add tracepoints for debugging slot table operationsTrond Myklebust1-0/+10
Add tracepoints to nfs41_setup_sequence and nfs41_sequence_done to track session and slot table state changes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-07NFSv4.1 Increase NFS4_DEF_SLOT_TABLE_SIZEAndy Adamson1-1/+1
Increase NFS4_DEF_SLOT_TABLE_SIZE which is used as the client ca_maxreequests value in CREATE_SESSION. Current non-dynamic session slot server implementations use the client ca_maxrequests as a maximum slot number: 64 session slots can handle most workloads. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-28NFSv4.1 Refactor nfs4_init_session and nfs4_init_channel_attrsAndy Adamson1-5/+2
nfs4_init_session was originally written to be called prior to nfs4_init_channel_attrs, setting the session target_max response and request sizes that nfs4_init_channel_attrs would pay attention to. In the current code flow, nfs4_init_session, just like nfs4_init_ds_session for the data server case, is called after the session is all negotiated, and is actually used in a RECLAIM COMPLETE call to the server. Remove the un-needed fc_target_max response and request fields from nfs4_session and just set the max_resp_sz and max_rqst_sz in nfs4_init_channel_attrs. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-20NFSv4.1 Fix a pNFS session draining deadlockAndy Adamson1-5/+8
On a CB_RECALL the callback service thread flushes the inode using filemap_flush prior to scheduling the state manager thread to return the delegation. When pNFS is used and I/O has not yet gone to the data server servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async filemap_flush call, the LAYOUTGET must proceed to completion. If the state manager starts to recover data while the inode flush is sending the LAYOUTGET, a deadlock occurs as the callback service thread holds the single callback session slot until the flushing is done which blocks the state manager thread, and the state manager thread has set the session draining bit which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot table waitq. Separate the draining of the back channel from the draining of the fore channel by moving the NFS4_SESSION_DRAINING bit from session scope into the fore and back slot tables. Drain the back channel first allowing the LAYOUTGET call to proceed (and fail) so the callback service thread frees the callback slot. Then proceed with draining the forechannel. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-15NFSv4.1: Deal effectively with interrupted RPC calls.Trond Myklebust1-0/+1
If an RPC call is interrupted, assume that the server hasn't processed the RPC call so that the next time we use the slot, we know that if we get a NFS4ERR_SEQ_MISORDERED or NFS4ERR_SEQ_FALSE_RETRY, we just have to bump the sequence number. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-15NFSv4.1: Move the RPC timestamp out of the slot.Trond Myklebust1-1/+0
Shave a few bytes off the slot table size by moving the RPC timestamp into the sequence results. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Try to eliminate outliers when updating target_highest_slotidTrond Myklebust1-0/+2
Look for sudden changes in the first and second derivatives in order to eliminate outlier changes to target_highest_slotid (which are due to out-of-order RPC replies). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Ensure smooth handover of slots from one task to the next waitingTrond Myklebust1-0/+4
Currently, we see a lot of bouncing for the value of highest_used_slotid due to the fact that slots are getting freed, instead of getting instantly transmitted to the next waiting task. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Set the maximum slot table size to 1024 slotsTrond Myklebust1-1/+1
This means that we end up statically allocating 128 bytes for the bitmap on each slot table. For a server that supports 1MB write and read I/O sizes this means that we can completely fill the maximum 1GB TCP send/receive windows. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Move slot table and session struct definitions to nfs4session.hTrond Myklebust1-0/+101
Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Cleanup move session slot management to fs/nfs/nfs4session.cTrond Myklebust1-0/+35
NFSv4.1 session management is getting complex enough to deserve a separate file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>