summaryrefslogtreecommitdiffstats
path: root/fs/nfs/nfs3acl.c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-20nfs: fix xfstest generic/099 failed on nfsv3ZhangXiaoxu1-2/+0
After setxattr, the nfsv3 cached the acl which set by user. But at the backend, the shared file system (eg. ext4) will check the acl, if it can merged with mode, it won't add acl to the file. So, the nfsv3 cached acl is redundant. Don't 'set_cached_acl' when setxattr. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-08-08NFS: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-31posix_acl: Inode acl caching fixesAndreas Gruenbacher1-2/+41
When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06posix acls: Remove duplicate xattr name definitionsAndreas Gruenbacher1-2/+2
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT} and replace them with the definitions in <include/uapi/linux/xattr.h>. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells1-1/+1
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-25NFSv3: Fix missing includes of nfs3_fs.hTrond Myklebust1-0/+1
Silence a few warnings about missing symbols that are due to missing includes of nfs3_fs.h. Fixes: 00a36a1090350 (NFS: Move v3 declarations out of internal.h) Fixes: cb8c20fa53ec2 (NFS: Move NFS v3 acl functions to nfs3_fs.h) Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-26NFSv3: Fix another acl regressionTrond Myklebust1-1/+4
When creating a new object on the NFS server, we should not be sending posix setacl requests unless the preceding posix_acl_create returned a non-trivial acl. Doing so, causes Solaris servers in particular to return an EINVAL. Fixes: 013cdf1088d72 (nfs: use generic posix ACL infrastructure,,,) Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132786 Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03nfs3_list_one_acl(): check get_acl() result with IS_ERR_OR_NULLAndrey Utkin1-1/+1
There was a check for result being not NULL. But get_acl() may return NULL, or ERR_PTR, or actual pointer. The purpose of the function where current change is done is to "list ACLs only when they are available", so any error condition of get_acl() mustn't be elevated, and returning 0 there is still valid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81111 Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 74adf83f5d77 (nfs: only show Posix ACLs in listxattr if actually...) Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-07-08nfs: only show Posix ACLs in listxattr if actually presentChristoph Hellwig1-0/+43
The big ACL switched nfs to use generic_listxattr, which calls all existing ->list handlers. Add a custom .listxattr implementation that only lists the ACLs if they actually are present on the given inode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Philippe Troin <phil@fifi.org> Tested-by: Philippe Troin <phil@fifi.org> Fixes: 013cdf1088d7 (nfs: use generic posix ACL infrastructure ...) Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-02-03NFSv3: Fix return value of nfs3_proc_setaclsTrond Myklebust1-2/+11
nfs3_proc_setacls is used internally by the NFSv3 create operations to set the acl after the file has been created. If the operation fails because the server doesn't support acls, then it must return '0', not -EOPNOTSUPP. Reported-by: Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/20140201010328.GI15937@n2100.arm.linux.org.uk Cc: Christoph Hellwig <hch@lst.de> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-02-03NFSv3: Remove unused function nfs3_proc_set_default_aclTrond Myklebust1-19/+0
Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-01-31nfs: fix setting of ACLs on file creation.Noah Massey1-1/+1
nfs3_get_acl() tries to skip posix equivalent ACLs, but misinterprets the return value of posix_acl_equiv_mode(). Fix it. This is a regression introduced by "nfs: use generic posix ACL infrastructure for v3 Posix ACLs" CC: Christoph Hellwig <hch@infradead.org> CC: linux-nfs@vger.kernel.org CC: linux-fsdevel@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-01-26nfs: use generic posix ACL infrastructure for v3 Posix ACLsChristoph Hellwig1-236/+55
This causes a small behaviour change in that we don't bother to set ACLs on file creation if the mode bit can express the access permissions fully, and thus behaving identical to local filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25fs: make posix_acl_create more usefulChristoph Hellwig1-1/+1
Rename the current posix_acl_created to __posix_acl_create and add a fully featured helper to set up the ACLs on file creation that uses get_acl(). Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-18userns: Pass a userns parameter into posix_acl_to_xattr and posix_acl_from_xattrEric W. Biederman1-2/+2
- Pass the user namespace the uid and gid values in the xattr are stored in into posix_acl_from_xattr. - Pass the user namespace kuid and kgid values should be converted into when storing uid and gid values in an xattr in posix_acl_to_xattr. - Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to pass in &init_user_ns. In the short term this change is not strictly needed but it makes the code clearer. In the longer term this change is necessary to be able to mount filesystems outside of the initial user namespace that natively store posix acls in the linux xattr format. Cc: Theodore Tso <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-03-11NFS: Fix a number of sparse warningsTrond Myklebust1-1/+1
Fix a number of "warning: symbol 'foo' was not declared. Should it be static?" conditions. Fix 2 cases of "warning: Using plain integer as NULL pointer" fs/nfs/delegation.c:263:31: warning: restricted fmode_t degrades to integer - We want to allow upgrades to a WRITE delegation, but should otherwise consider servers that hand out duplicate delegations to be borken. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-08-01switch posix_acl_create() to umode_t *Al Viro1-1/+1
so we can pass &inode->i_mode to it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25kill boilerplates around posix_acl_create_masq()Al Viro1-7/+3
new helper: posix_acl_create(&acl, gfp, mode_p). Replaces acl with modified clone, on failure releases acl and replaces with NULL. Returns 0 or -ve on error. All callers of posix_acl_create_masq() switched. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-25NFS: Prevent memory allocation failure in nfsacl_encode()Chuck Lever1-2/+2
nfsacl_encode() allocates memory in certain cases. This of course is not guaranteed to work. Since commit 9f06c719 "SUNRPC: New xdr_streams XDR encoder API", the kernel's XDR encoders can't return a result indicating possibly a failure, so a memory allocation failure in nfsacl_encode() has become fatal (ie, the XDR code Oopses) in some cases. However, the allocated memory is a tiny fixed amount, on the order of 40-50 bytes. We can easily use a stack-allocated buffer for this, with only a wee bit of nose-holding. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14NFS: Reduce stack footprint of nfs3_proc_getacl() and nfs3_proc_setacl()Trond Myklebust1-7/+16
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-06-17nfs: remove unnecessary NFS_INO_INVALID_ACL checksJames Morris1-2/+0
Unless I'm mistaken, NFS_INO_INVALID_ACL is being checked twice during getacl calls (i.e. first via nfs_revalidate_inode() and then by each all site). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-10NFSv3: Fix posix ACL codeTrond Myklebust1-6/+21
Fix a memory leak due to allocation in the XDR layer. In cases where the RPC call needs to be retransmitted, we end up allocating new pages without clearing the old ones. Fix this by moving the allocation into nfs3_proc_setacls(). Also fix an issue discovered by Kevin Rudd, whereby the amount of memory reserved for the acls in the xdr_buf->head was miscalculated, and causing corruption. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07NFS: missing nfs_fattr_init in nfs3_proc_getacl and nfs3_proc_setacls ↵Jeff Layton1-0/+2
(resend #2) The fattrs used in the NFSv3 getacl/setacl calls are not being properly initialized. This occasionally causes nfs_update_inode to fall into NFSv4 specific codepaths when handling post-op attrs from these calls. Thanks to Cai Qian for noticing the spurious NFSv4 messages in debug output from a v3 mount... Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09NFS: Ensure we zap only the access and acl caches when setting new aclsTrond Myklebust1-3/+6
...and ensure that we obey the NFS_INO_INVALID_ACL flag when retrieving the acls. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: Remove nfs_begin_data_update/nfs_end_data_updateTrond Myklebust1-2/+0
The lower level routines in fs/nfs/proc.c, fs/nfs/nfs3proc.c and fs/nfs/nfs4proc.c should already be dealing with the revalidation issues. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-06-09NFSv3: Client-side nfsacl caching fixAndreas Gruenbacher1-3/+8
Fix two errors in the client-side acl cache: First, when nfs3_proc_getacl requests only the default acl of a file and the access acl is not cached already, a NULL access acl entry is cached instead of ERR_PTR(-EAGAIN) ("not cached"). Second, update the cached acls in nfs3_proc_setacls: nfs_refresh_inode does not always invalidate the cached acls, and when it does not, the cached acls get out of sync. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20SUNRPC: eliminate rpc_call()Chuck Lever1-4/+12
Clean-up: replace rpc_call() helper with direct call to rpc_call_sync. This makes NFSv2 and NFSv3 synchronous calls more computationally efficient, and reduces stack consumption in functions that used to invoke rpc_call more than once. Test plan: Compile kernel with CONFIG_NFS enabled. Connectathon on NFS version 2, version 3, and version 4 mount points. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-08-18[PATCH] NFS: Introduce the use of inode->i_lock to protect fields in nfsiChuck Lever1-0/+2
Down the road we want to eliminate the use of the global kernel lock entirely from the NFS client. To do this, we need to protect the fields in the nfs_inode structure adequately. Start by serializing updates to the "cache_validity" field. Note this change addresses an SMP hang found by njw@osdl.org, where processes deadlock because nfs_end_data_update and nfs_revalidate_mapping update the "cache_validity" field without proper serialization. Test plan: Millions of fsx ops on SMP clients. Run Nick Wilson's breaknfs program on large SMP clients. Signed-off-by: Chuck Lever <cel@netapp.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-18[PATCH] NFS: split nfsi->flags into two fieldsChuck Lever1-1/+1
Certain bits in nfsi->flags can be manipulated with atomic bitops, and some are better manipulated via logical bitmask operations. This patch splits the flags field into two. The next patch introduces atomic bitops for one of the fields. Test plan: Millions of fsx ops on SMP clients. Signed-off-by: Chuck Lever <cel@netapp.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28[PATCH] really remove xattr_acl.hChristoph Hellwig1-7/+7
Looks like it sneaked back with the NFS ACL merge.. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[PATCH] NFS: Fix up v3 ACL caching codeTrond Myklebust1-5/+6
Initialize the inode cache values correctly. Clean up __nfs3_forget_cached_acls() Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Cache the NFSv3 acls.Andreas Gruenbacher1-15/+85
Attach acls to inodes in the icache to avoid unnecessary GETACL RPC round-trips. As long as the client doesn't retrieve any acls itself, only the default acls of exiting directories and the default and access acls of new directories will end up in the cache, which preserves some memory compared to always caching the access and default acl of all files. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Fix handling of the umask when an NFSv3 default acl is present.Andreas Gruenbacher1-0/+29
NFSv3 has no concept of a umask on the server side: The client applies the umask locally, and sends the effective permissions to the server. This behavior is wrong when files are created in a directory that has a default ACL. In this case, the umask is supposed to be ignored, and only the default ACL determines the file's effective permissions. Usually its the server's task to conditionally apply the umask. But since the server knows nothing about the umask, we have to do it on the client side. This patch tries to fetch the parent directory's default ACL before creating a new file, computes the appropriate create mode to send to the server, and finally sets the new file's access and default acl appropriately. Many thanks to Buck Huppmann <buchk@pobox.com> for sending the initial version of this patch, as well as for arguing why we need this change. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] NFS: Add support for NFSv3 ACLsAndreas Gruenbacher1-0/+303
This adds acl support fo nfs clients via the NFSACL protocol extension, by implementing the getxattr, listxattr, setxattr, and removexattr iops for the system.posix_acl_access and system.posix_acl_default attributes. This patch implements a dumb version that uses no caching (and thus adds some overhead). (Another patch in this patchset adds caching as well.) Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>