summaryrefslogtreecommitdiffstats
path: root/fs/nfs/client.c
AgeCommit message (Collapse)AuthorFilesLines
2008-12-23NFSv4: Fix up delegation callbacksTrond Myklebust1-19/+38
Currently, the callback server is listening on IPv6 if it is enabled. This means that IPv4 addresses will always be mapped. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23NFSv4: Remove nfs_client->cl_semTrond Myklebust1-1/+0
Now that we're using the flags to indicate state that needs to be recovered, as well as having implemented proper refcounting and spinlocking on the state and open_owners, we can get rid of nfs_client->cl_sem. The only remaining case that was dubious was the file locking, and that case is now covered by the nfsi->rwsem. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23NLM: allow lockd requests from an unprivileged portChuck Lever1-0/+2
If the admin has specified the "noresvport" option for an NFS mount point, the kernel's NFS client uses an unprivileged source port for the main NFS transport. The kernel's lockd client should use an unprivileged port in this case as well. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23NFS: add "[no]resvport" mount optionChuck Lever1-4/+7
The standard default security setting for NFS is AUTH_SYS. An NFS client connects to NFS servers via a privileged source port and a fixed standard destination port (2049). The client sends raw uid and gid numbers to identify users making NFS requests, and the server assumes an appropriate authority on the client has vetted these values because the source port is privileged. On Linux, by default in-kernel RPC services use a privileged port in the range between 650 and 1023 to avoid using source ports of well- known IP services. Using such a small range limits the number of NFS mount points and the number of unique NFS servers to which a client can connect concurrently. An NFS client can use unprivileged source ports to expand the range of source port numbers, allowing more concurrent server connections and more NFS mount points. Servers must explicitly allow NFS connections from unprivileged ports for this to work. In the past, bumping the value of the sunrpc.max_resvport sysctl on the client would permit the NFS client to use unprivileged ports. Bumping this setting also changes the maximum port number used by other in-kernel RPC services, some of which still required a port number less than 1023. This is exacerbated by the way source port numbers are chosen by the Linux RPC client, which starts at the top of the range and works downwards. It means that bumping the maximum means all RPC services requesting a source port will likely get an unprivileged port instead of a privileged one. Changing this setting effects all NFS mount points on a client. A sysadmin could not selectively choose which mount points would use non-privileged ports and which could not. Lastly, this mechanism of expanding the limit on the number of NFS mount points was entirely undocumented. To address the need for the NFS client to use a large range of source ports without interfering with the activity of other in-kernel RPC services, we introduce a new NFS mount option. This option explicitly tells only the NFS client to use a non-privileged source port when communicating with the NFS server for one specific mount point. This new mount option is called "resvport," like the similar NFS mount option on FreeBSD and Mac OS X. A sister patch for nfs-utils will be submitted that documents this new option in nfs(5). The default setting for this new mount option requires the NFS client to use a privileged port, as before. Explicitly specifying the "noresvport" mount option allows the NFS client to use an unprivileged source port for this mount point when connecting to the NFS server port. This mount option is supported only for text-based NFS mounts. [ Sidebar: it is widely known that security mechanisms based on the use of privileged source ports are ineffective. However, the NFS client can combine the use of unprivileged ports with the use of secure authentication mechanisms, such as Kerberos. This allows a large number of connections and mount points while ensuring a useful level of security. Eventually we may change the default setting for this option depending on the security flavor used for the mount. For example, if the mount is using only AUTH_SYS, then the default setting will be "resvport;" if the mount is using a strong security flavor such as krb5, the default setting will be "noresvport." ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> [Trond.Myklebust@netapp.com: Fixed a bug whereby nfs4_init_client() was being called with incorrect arguments.] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23NFS: move nfs_server flag initializationChuck Lever1-8/+8
Make it possible for the NFSv4 mount set up logic to pass mount option flags down the stack to nfs_create_rpc_client(). This is immediately useful if we want NFS mount options to modulate settings of the underlying RPC transport, but it may be useful at some later point if other parts of the NFSv4 mount initialization logic want to know what the mount options are. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23NFS: expand flags passed to nfs_create_rpc_client()Chuck Lever1-4/+8
The nfs_create_rpc_client() function sets up an RPC client for an NFS mount point. Add an option that allows it to set up an RPC transport from an unprivileged port. Instead of having nfs_create_rpc_client()'s callers retain local knowledge about how to set up an RPC client, create a couple of flag arguments to control the use of RPC_CLNT_CREATE flags. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07NFS: Don't apply NFS_MOUNT_FLAGMASK to text-based mountsTrond Myklebust1-2/+2
The point of introducing text-based mounts was to allow us to add functionality without having to worry about legacy binary mount formats. The mask should be there in order to ensure that binary formats don't start enabling features that they cannot support. There is no justification for applying it to the text mount path. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-06NFS: Clean up nfs_sb_active/nfs_sb_deactiveTrond Myklebust1-1/+0
Instead of causing umount requests to block on server->active_wq while the asynchronous sillyrename deletes are executing, we can use the sb->s_active counter to obtain a reference to the super_block, and then release that reference in nfs_async_unlink_release(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09NFS: set transport defaults after mount option parsing is finishedTrond Myklebust1-5/+8
Move the UDP/TCP default timeo/retrans settings for text mounts to nfs_init_timeout_values(), which was were they were always being initialised (and sanity checked) for binary mounts. Document the default timeout values using appropriate #defines. Ensure that we initialise and sanity check the transport protocols that may have been specified by the user. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-05-16nfs: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-4/+4
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-29nfs: use proc_create to setup de->proc_fopsDenis V. Lunev1-8/+6
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_root_fsAlexey Dobriyan1-3/+3
Use creation by full path instead: "fs/foo". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19NFSv4: Reintroduce machine credsTrond Myklebust1-0/+7
We need to try to ensure that we always use the same credentials whenever we re-establish the clientid on the server. If not, the server won't recognise that we're the same client, and so may not allow us to recover state. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19NFS: Save the values of the "mount*=" mount optionsChuck Lever1-0/+10
Save the value of the mountproto= mountport= mountvers= and mountaddr= options so that these values can be displayed later via nfs_show_options(). This preserves the intent of the original mount options, should the file system need to be remounted based on what's displayed in /proc/mounts. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19NFS: Save the value of the "port=" mount optionChuck Lever1-0/+4
During a remount based on the mount options displayed in /proc/mounts, we want to preserve the original behavior of the mount request. Let's save the original setting of the "port=" mount option in the mount's nfs_server structure. This allows us to simplify the default behavior of port setting for NFSv4 mounts: by default, NFSv2/3 mounts first try an RPC bind to determine the NFS server's port, unless the user specified the "port=" mount option; Users can force the client to skip the RPC bind by explicitly specifying "port=<value>". NFSv4, by contrast, assumes the NFS server port is 2049 and skips the RPC bind, unless the user specifies "port=". Users can force an RPC bind for NFSv4 by explicitly specifying "port=0". I added a couple of extra comments to clarify this behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-28SUNRPC: Add a (empty for the moment) destructor for rpc_wait_queuesTrond Myklebust1-0/+2
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-01Merge branch 'task_killable' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits) Remove commented-out code copied from NFS NFS: Switch from intr mount option to TASK_KILLABLE Add wait_for_completion_killable Add wait_event_killable Add schedule_timeout_killable Use mutex_lock_killable in vfs_readdir Add mutex_lock_killable Use lock_page_killable Add lock_page_killable Add fatal_signal_pending Add TASK_WAKEKILL exit: Use task_is_* signal: Use task_is_* sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL ptrace: Use task_is_* power: Use task_is_* wait: Use TASK_NORMAL proc/base.c: Use task_is_* proc/array.c: Use TASK_REPORT perfmon: Use task_is_* ... Fixed up conflicts in NFS/sunrpc manually..
2008-01-30NFSv4: Iterate through all nfs_clients when the server recalls a delegationTrond Myklebust1-0/+35
The same delegation may have been handed out to more than one nfs_client. Ensure that if a recall occurs, we return all instances. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NLM: Introduce an arguments structure for nlmclnt_init()Chuck Lever1-7/+10
Clean up: pass 5 arguments to nlmclnt_init() in a structure similar to the new nfs_client_initdata structure. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2008-01-30NFS: Invoke nlmclnt_init during NFS mount processingChuck Lever1-13/+19
Cache an appropriate nlm_host structure in the NFS client's mount point metadata for later use. Note that there is no need to set NFS_MOUNT_NONLM in the error case -- if nfs_start_lockd() returns a non-zero value, its callers ensure that the mount request fails outright. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Fix the 'proto=' mount optionTrond Myklebust1-7/+13
Currently, if you have a server mounted using networking protocol, you cannot specify a different value using the 'proto=' option on another mountpoint. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Support per-mountpoint timeout parameters.Trond Myklebust1-35/+47
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Ensure that we respect NFS_MAX_TCP_TIMEOUTTrond Myklebust1-1/+5
It isn't sufficient just to limit timeout->to_initval, we also need to limit to_maxval. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Support non-IPv4 addresses in nfs_parsed_mount_dataChuck Lever1-2/+2
Replace the nfs_server and mount_server address fields in the nfs_parsed_mount_data structure with a "struct sockaddr_storage" instead of a "struct sockaddr_in". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Adjust nfs_clone_mount structure to store "struct sockaddr *"Chuck Lever1-2/+2
Change the addr field in the nfs_clone_mount structure to store a "struct sockaddr *" to support non-IPv4 addresses in the NFS client. Note this is mostly a cosmetic change, and does not actually allow referrals using IPv6 addresses. The existing referral code assumes that the server returns a string that represents an IPv4 address. This code needs to support hostnames and IPv6 addresses as well as IPv4 addresses, thus it will need to be reorganized completely (to handle DNS resolution in user space). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Change nfs4_set_client() to accept struct sockaddr *Chuck Lever1-10/+15
Adjust the arguments and callers of nfs4_set_client() to pass a "struct sockaddr *" instead of a "struct sockaddr_in *" to support non-IPv4 addresses in the NFS client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Change nfs_get_client() to take sockaddr *Chuck Lever1-6/+5
Adjust arguments and callers of nfs_get_client() to pass a "struct sockaddr *" instead of "struct sockaddr_in *" to support non-IPv4 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Change nfs_find_client() to take "struct sockaddr *"Chuck Lever1-6/+1
Adjust arguments and callers of nfs_find_client() to pass a "struct sockaddr *" instead of "struct sockaddr_in *" to support non-IPv4 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Trond: Also fix up protocol version number argument in nfs_find_client() to use the correct u32 type. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Expand server address storage in nfs_client structChuck Lever1-2/+6
Prepare for managing larger addresses in the NFS client by widening the nfs_client struct's cl_addr field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> (Modified to work with the new parameters for nfs_alloc_client) Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Add support for AF_INET6 addresses in __nfs_find_client()Trond Myklebust1-2/+39
Introduce AF_INET6-specific address checking to __nfs_find_client(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: eliminate NIPQUAD(clp->cl_addr.sin_addr)Chuck Lever1-6/+6
To ensure the NFS client displays IPv6 addresses properly, replace address family-specific NIPQUAD() invocations with a call to the RPC client to get a formatted string representing the remote peer's address. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Remove the redundant nfs_client->cl_nfsversionTrond Myklebust1-23/+18
We can get the same information from the rpc_ops structure instead. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Clean up the nfs_find_client function.Trond Myklebust1-22/+30
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Clean up the nfs_client initialisationTrond Myklebust1-20/+31
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Clean up address comparison in __nfs_find_client()Chuck Lever1-2/+1
The address comparison in the __nfs_find_client() function is deceptive. It uses a memcmp() to check a pair of u32 fields for equality. Not only is this inefficient, but usually memcmp() is used for comparing two *whole* sockaddr_in's (which includes comparisons of the address family and port number), so it's easy to mistake the comparison here for a whole sockaddr comparison, which it isn't. So for clarity and efficiency, we replace the memcmp() with a simple test for equality between the two s_addr fields. This should have no behavioral effect. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NFS: Stop sillyname renames and unmounts from racingSteve Dickson1-0/+3
Added an active/deactive mechanism to the nfs_server structure allowing async operations to hold off umount until the operations are done. Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-12-11NFSv2/v3: Fix a memory leak when using -onolockTrond Myklebust1-3/+3
Neil Brown said: > Hi Trond, > > We found that a machine which made moderately heavy use of > 'automount' was leaking some nfs data structures - particularly the > 4K allocated by rpc_alloc_iostats. > It turns out that this only happens with filesystems with -onolock > set. > The problem is that if NFS_MOUNT_NONLM is set, nfs_start_lockd doesn't > set server->destroy, so when the filesystem is unmounted, the > ->client_acl is not shutdown, and so several resources are still > held. Multiple mount/umount cycles will slowly eat away memory > several pages at a time. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NeilBrown <neilb@suse.de>
2007-12-06NFS: Switch from intr mount option to TASK_KILLABLEMatthew Wilcox1-5/+1
By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr' mount option. We have to use _killable everywhere instead of _interruptible as we get rid of rpc_clnt_sigmask/sigunmask. Signed-off-by: Liam R. Howlett <howlett@gmail.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-10-17mm: bdi init hooksPeter Zijlstra1-0/+6
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09NFS: support RDMA mounts\"Talpey, Thomas\1-0/+2
Adds hooks to the string-based NFS mount to support an "rdma" protocol option. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS/SUNRPC: use transport protocol naming\"Talpey, Thomas\1-2/+3
Instead of an { address family, raw IP protocol number }-tuple, use the newly-defined RPC identifier when creating clients in the upper layers. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: use in-kernel mount argument structure for nfsv4 mounts\"Talpey, Thomas\1-12/+12
The user-visible nfs4_mount_data does not contain sufficient data to describe new mount options, and also is now a legacy structure. Replace it with the internal nfs_parsed_mount_data for nfsv4 in-kernel use. Signed-off-by: Tom Talpey <tmt@netapp.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS: use in-kernel mount argument structure for nfsv[23] mounts\"Talpey, Thomas\1-8/+10
The user-visible nfs_mount_data does not contain sufficient data to describe new mount options, and also is now a legacy structure. Replace it with the internal nfs_parsed_mount_data for nfsv[23] in-kernel use. Signed-off-by: Tom Talpey <tmt@netapp.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-09-28NFS: Fix an Oops in encode_lookup()Trond Myklebust1-10/+19
It doesn't look as if the NFS file name limit is being initialised correctly in the struct nfs_server. Make sure that we limit whatever is being set in nfs_probe_fsinfo() and nfs_init_server(). Also ensure that readdirplus and nfs4_path_walk respect our file name limits. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Make NFS client use seq_list_xxx helpersPavel Emelianov1-48/+6
This includes /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes entries. Both need to show the header and use the list_head. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10NFSv4: Reduce the chances of an open_owner identifier collisionTrond Myklebust1-2/+1
Currently we just use a 32-bit counter. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10NFSv4: Don't reuse expired nfs4_state_owner structsTrond Myklebust1-10/+0
That just confuses certain NFSv4 servers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Remove redundant calls to rpciod_up()/rpciod_down()Trond Myklebust1-15/+0
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan1-1/+1
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap1-1/+0
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 14:47:27 +0000