summaryrefslogtreecommitdiffstats
path: root/fs/kernfs
AgeCommit message (Collapse)AuthorFilesLines
2019-09-19Merge tag 'y2038-vfs' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull y2038 vfs updates from Arnd Bergmann: "Add inode timestamp clamping. This series from Deepa Dinamani adds a per-superblock minimum/maximum timestamp limit for a file system, and clamps timestamps as they are written, to avoid random behavior from integer overflow as well as having different time stamps on disk vs in memory. At mount time, a warning is now printed for any file system that can represent current timestamps but not future timestamps more than 30 years into the future, similar to the arbitrary 30 year limit that was added to settimeofday(). This was picked as a compromise to warn users to migrate to other file systems (e.g. ext4 instead of ext3) when they need the file system to survive beyond 2038 (or similar limits in other file systems), but not get in the way of normal usage" * tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: ext4: Reduce ext4 timestamp warnings isofs: Initialize filesystem timestamp ranges pstore: fs superblock limits fs: omfs: Initialize filesystem timestamp ranges fs: hpfs: Initialize filesystem timestamp ranges fs: ceph: Initialize filesystem timestamp ranges fs: sysv: Initialize filesystem timestamp ranges fs: affs: Initialize filesystem timestamp ranges fs: fat: Initialize filesystem timestamp ranges fs: cifs: Initialize filesystem timestamp ranges fs: nfs: Initialize filesystem timestamp ranges ext4: Initialize timestamps limits 9p: Fill min and max timestamps in sb fs: Fill in max and min timestamps in superblock utimes: Clamp the timestamps before update mount: Add mount warning for impending timestamp expiry timestamp_truncate: Replace users of timespec64_trunc vfs: Add timestamp_truncate() api vfs: Add file timestamp range support
2019-08-30timestamp_truncate: Replace users of timespec64_truncDeepa Dinamani1-4/+3
Update the inode timestamp updates to use timestamp_truncate() instead of timespec64_trunc(). The change was mostly generated by the following coccinelle script. virtual context virtual patch @r1 depends on patch forall@ struct inode *inode; identifier i_xtime =~ "^i_[acm]time$"; expression e; @@ inode->i_xtime = - timespec64_trunc( + timestamp_truncate( ..., - e); + inode); Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: adrian.hunter@intel.com Cc: dedekind1@gmail.com Cc: gregkh@linuxfoundation.org Cc: hch@lst.de Cc: jaegeuk@kernel.org Cc: jlbec@evilplan.org Cc: richard@nod.at Cc: tj@kernel.org Cc: yuchao0@huawei.com Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-ntfs-dev@lists.sourceforge.net Cc: linux-mtd@lists.infradead.org
2019-07-25fs: kernfs: Fix possible null-pointer dereferences in ↵Jia-Ju Bai1-2/+4
kernfs_path_from_node_locked() In kernfs_path_from_node_locked(), there is an if statement on line 147 to check whether buf is NULL: if (buf) When buf is NULL, it is used on line 151: len += strlcpy(buf + len, parent_str, ...) and line 158: len += strlcpy(buf + len, "/", ...) and line 160: len += strlcpy(buf + len, kn->name, ...) Thus, possible null-pointer dereferences may occur. To fix these possible bugs, buf is checked before being used. If it is NULL, -EINVAL is returned. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20190724022242.27505-1-baijiaju1990@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25kernfs: fix potential null pointer dereferencePeng Wang1-2/+1
Get root safely after kn is ensureed to be not null. Signed-off-by: Peng Wang <rocking@whu.edu.cn> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20190708151611.13242-1-rocking@whu.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner6-12/+6
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge branch 'work.dcache' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc dcache updates from Al Viro: "Most of this pile is putting name length into struct name_snapshot and making use of it. The beginning of this series ("ovl_lookup_real_one(): don't bother with strlen()") ought to have been split in two (separate switch of name_snapshot to struct qstr from overlayfs reaping the trivial benefits of that), but I wanted to avoid a rebase - by the time I'd spotted that it was (a) in -next and (b) close to 5.1-final ;-/" * 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: audit_compare_dname_path(): switch to const struct qstr * audit_update_watch(): switch to const struct qstr * inotify_handle_event(): don't bother with strlen() fsnotify: switch send_to_group() and ->handle_event to const struct qstr * fsnotify(): switch to passing const struct qstr * for file_name switch fsnotify_move() to passing const struct qstr * for old_name ovl_lookup_real_one(): don't bother with strlen() sysv: bury the broken "quietly truncate the long filenames" logics nsfs: unobfuscate unexport d_alloc_pseudo()
2019-05-07Merge tag 'selinux-pr-20190507' of ↵Linus Torvalds4-116/+82
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "We've got a few SELinux patches for the v5.2 merge window, the highlights are below: - Add LSM hooks, and the SELinux implementation, for proper labeling of kernfs. While we are only including the SELinux implementation here, the rest of the LSM folks have given the hooks a thumbs-up. - Update the SELinux mdp (Make Dummy Policy) script to actually work on a modern system. - Disallow userspace to change the LSM credentials via /proc/self/attr when the task's credentials are already overridden. The change was made in procfs because all the LSM folks agreed this was the Right Thing To Do and duplicating it across each LSM was going to be annoying" * tag 'selinux-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: proc: prevent changes to overridden credentials selinux: Check address length before reading address family kernfs: fix xattr name handling in LSM helpers MAINTAINERS: update SELinux file patterns selinux: avoid uninitialized variable warning selinux: remove useless assignments LSM: lsm_hooks.h - fix missing colon in docstring selinux: Make selinux_kernfs_init_security static kernfs: initialize security of newly created nodes selinux: implement the kernfs_init_security hook LSM: add new hook for kernfs node initialization kernfs: use simple_xattrs for security attributes selinux: try security xattr after genfs for kernfs filesystems kernfs: do not alloc iattrs in kernfs_xattr_get kernfs: clean up struct kernfs_iattrs scripts/selinux: fix build selinux: use kernel linux/socket.h for genheaders and mdp scripts/selinux: modernize mdp
2019-04-26fsnotify(): switch to passing const struct qstr * for file_nameAl Viro1-2/+4
Note that in fnsotify_move() and fsnotify_link() we are guaranteed that dentry->d_name won't change during the fsnotify() evaluation (by having the parent directory locked exclusive), so we don't need to fetch dentry->d_name.name in the callers. In fsnotify_dirent() the same stability of dentry->d_name is also true, but it's a bit more convoluted - there is one callchain (devpts_pty_new() -> fsnotify_create() -> fsnotify_dirent()) where the parent is _not_ locked, but on devpts ->d_name of everything is unchanging; it has neither explicit nor implicit renames. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-25kernfs: fix barrier usage in __kernfs_new_node()Andrea Parri1-3/+2
smp_mb__before_atomic() can not be applied to atomic_set(). Remove the barrier and rely on RELEASE synchronization. Fixes: ba16b2846a8c6 ("kernfs: add an API to get kernfs node from inode number") Cc: stable@vger.kernel.org Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04kernfs: fix xattr name handling in LSM helpersOndrej Mosnacek1-41/+21
The implementation of kernfs_security_xattr_*() helpers reuses the kernfs_node_xattr_*() functions, which take the suffix of the xattr name and extract full xattr name from it using xattr_full_name(). However, this function relies on the fact that the suffix passed to xattr handlers from VFS is always constructed from the full name by just incerementing the pointer. This doesn't necessarily hold for the callers of kernfs_security_xattr_*(), so their usage will easily lead to out-of-bounds access. Fix this by moving the xattr name reconstruction to the VFS xattr handlers and replacing the kernfs_security_xattr_*() helpers with more general kernfs_xattr_*() helpers that take full xattr name and allow accessing all kernfs node's xattrs. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: b230d5aba2d1 ("LSM: add new hook for kernfs node initialization") Fixes: ec882da5cda9 ("selinux: implement the kernfs_init_security hook") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20kernfs: initialize security of newly created nodesOndrej Mosnacek1-2/+9
Use the new security_kernfs_init_security() hook to allow LSMs to possibly assign a non-default security context to a newly created kernfs node based on the attributes of the new node and also its parent node. This fixes an issue with cgroupfs under SELinux, where newly created cgroup subdirectories/files would not inherit its parent's context if it had been set explicitly to a non-default value (other than the genfs context specified by the policy). This can be reproduced as follows (on Fedora/RHEL): # mkdir /sys/fs/cgroup/unified/test # # Need permissive to change the label under Fedora policy: # setenforce 0 # chcon -t container_file_t /sys/fs/cgroup/unified/test # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.procs -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 cgroup.threads drwxr-xr-x. 2 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 init.scope drwxr-xr-x. 26 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:21 system.slice drwxr-xr-x. 3 root root system_u:object_r:container_file_t:s0 0 Jan 29 03:15 test drwxr-xr-x. 3 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:06 user.slice # mkdir /sys/fs/cgroup/unified/test/subdir Actual result: # ls -ldZ /sys/fs/cgroup/unified/test/subdir drwxr-xr-x. 2 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:15 /sys/fs/cgroup/unified/test/subdir Expected result: # ls -ldZ /sys/fs/cgroup/unified/test/subdir drwxr-xr-x. 2 root root unconfined_u:object_r:container_file_t:s0 0 Jan 29 03:15 /sys/fs/cgroup/unified/test/subdir Link: https://github.com/SELinuxProject/selinux-kernel/issues/39 Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20LSM: add new hook for kernfs node initializationOndrej Mosnacek1-9/+39
This patch introduces a new security hook that is intended for initializing the security data for newly created kernfs nodes, which provide a way of storing a non-default security context, but need to operate independently from mounts (and therefore may not have an associated inode at the moment of creation). The main motivation is to allow kernfs nodes to inherit the context of the parent under SELinux, similar to the behavior of security_inode_init_security(). Other LSMs may implement their own logic for handling the creation of new nodes. This patch also adds helper functions to <linux/kernfs.h> for getting/setting security xattrs of a kernfs node so that LSMs hooks are able to do their job. Other important attributes should be accessible direcly in the kernfs_node fields (in case there is need for more, then new helpers should be added to kernfs.h along with the patch that needs them). Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> [PM: more manual merge fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20kernfs: use simple_xattrs for security attributesOndrej Mosnacek3-58/+2
Replace the special handling of security xattrs with simple_xattrs, as is already done for the trusted xattrs. This simplifies the code and allows LSMs to use more than just a single xattr to do their business. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> [PM: manual merge fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20kernfs: do not alloc iattrs in kernfs_xattr_getOndrej Mosnacek1-4/+14
This is a read-only operation, so we can simply return -ENODATA if kn->iattr is NULL. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> [PM: minor merge fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20kernfs: clean up struct kernfs_iattrsOndrej Mosnacek4-36/+31
Right now, kernfs_iattrs embeds the whole struct iattr, even though it doesn't really use half of its fields... This both leads to wasting space and makes the code look awkward. Let's just list the few fields we need directly in struct kernfs_iattrs. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> [PM: merged a number of chunks manually due to fuzz] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-12Merge branch 'work.mount' of ↵Linus Torvalds2-82/+38
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount infrastructure updates from Al Viro: "The rest of core infrastructure; no new syscalls in that pile, but the old parts are switched to new infrastructure. At that point conversions of individual filesystems can happen independently; some are done here (afs, cgroup, procfs, etc.), there's also a large series outside of that pile dealing with NFS (quite a bit of option-parsing stuff is getting used there - it's one of the most convoluted filesystems in terms of mount-related logics), but NFS bits are the next cycle fodder. It got seriously simplified since the last cycle; documentation is probably the weakest bit at the moment - I considered dropping the commit introducing Documentation/filesystems/mount_api.txt (cutting the size increase by quarter ;-), but decided that it would be better to fix it up after -rc1 instead. That pile allows to do followup work in independent branches, which should make life much easier for the next cycle. fs/super.c size increase is unpleasant; there's a followup series that allows to shrink it considerably, but I decided to leave that until the next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits) afs: Use fs_context to pass parameters over automount afs: Add fs_context support vfs: Add some logging to the core users of the fs_context log vfs: Implement logging through fs_context vfs: Provide documentation for new mount API vfs: Remove kern_mount_data() hugetlbfs: Convert to fs_context cpuset: Use fs_context kernfs, sysfs, cgroup, intel_rdt: Support fs_context cgroup: store a reference to cgroup_ns into cgroup_fs_context cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper cgroup_do_mount(): massage calling conventions cgroup: stash cgroup_root reference into cgroup_fs_context cgroup2: switch to option-by-option parsing cgroup1: switch to option-by-option parsing cgroup: take options parsing into ->parse_monolithic() cgroup: fold cgroup1_mount() into cgroup1_get_tree() cgroup: start switching to fs_context ipc: Convert mqueue fs to fs_context proc: Add fs_context support to procfs ...
2019-03-06Merge tag 'driver-core-5.1-rc1' of ↵Linus Torvalds4-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ...
2019-03-05fs: kernfs: add poll file operationJohannes Weiner1-11/+20
Patch series "psi: pressure stall monitors", v3. Android is adopting psi to detect and remedy memory pressure that results in stuttering and decreased responsiveness on mobile devices. Psi gives us the stall information, but because we're dealing with latencies in the millisecond range, periodically reading the pressure files to detect stalls in a timely fashion is not feasible. Psi also doesn't aggregate its averages at a high enough frequency right now. This patch series extends the psi interface such that users can configure sensitive latency thresholds and use poll() and friends to be notified when these are breached. As high-frequency aggregation is costly, it implements an aggregation method that is optimized for fast, short-interval averaging, and makes the aggregation frequency adaptive, such that high-frequency updates only happen while monitored stall events are actively occurring. With these patches applied, Android can monitor for, and ward off, mounting memory shortages before they cause problems for the user. For example, using memory stall monitors in userspace low memory killer daemon (lmkd) we can detect mounting pressure and kill less important processes before device becomes visibly sluggish. In our memory stress testing psi memory monitors produce roughly 10x less false positives compared to vmpressure signals. Having ability to specify multiple triggers for the same psi metric allows other parts of Android framework to monitor memory state of the device and act accordingly. The new interface is straightforward. The user opens one of the pressure files for writing and writes a trigger description into the file descriptor that defines the stall state - some or full, and the maximum stall time over a given window of time. E.g.: /* Signal when stall time exceeds 100ms of a 1s window */ char trigger[] = "full 100000 1000000"; fd = open("/proc/pressure/memory"); write(fd, trigger, sizeof(trigger)); while (poll() >= 0) { ... } close(fd); When the monitored stall state is entered, psi adapts its aggregation frequency according to what the configured time window requires in order to emit event signals in a timely fashion. Once the stalling subsides, aggregation reverts back to normal. The trigger is associated with the open file descriptor. To stop monitoring, the user only needs to close the file descriptor and the trigger is discarded. Patches 1-4 prepare the psi code for polling support. Patch 5 implements the adaptive polling logic, the pressure growth detection optimized for short intervals, and hooks up write() and poll() on the pressure files. The patches were developed in collaboration with Johannes Weiner. This patch (of 5): Kernfs has a standardized poll/notification mechanism for waking all pollers on all fds when a filesystem node changes. To allow polling for custom events, add a .poll callback that can override the default. This is in preparation for pollable cgroup pressure files which have per-fd trigger configurations. Link: http://lkml.kernel.org/r/20190124211518.244221-2-surenb@google.com Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Li Zefan <lizefan@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28kernfs, sysfs, cgroup, intel_rdt: Support fs_contextDavid Howells2-52/+38
Make kernfs support superblock creation/mount/remount with fs_context. This requires that sysfs, cgroup and intel_rdt, which are built on kernfs, be made to support fs_context also. Notes: (1) A kernfs_fs_context struct is created to wrap fs_context and the kernfs mount parameters are moved in here (or are in fs_context). (2) kernfs_mount{,_ns}() are made into kernfs_get_tree(). The extra namespace tag parameter is passed in the context if desired (3) kernfs_free_fs_context() is provided as a destructor for the kernfs_fs_context struct, but for the moment it does nothing except get called in the right places. (4) sysfs doesn't wrap kernfs_fs_context since it has no parameters to pass, but possibly this should be done anyway in case someone wants to add a parameter in future. (5) A cgroup_fs_context struct is created to wrap kernfs_fs_context and the cgroup v1 and v2 mount parameters are all moved there. (6) cgroup1 parameter parsing error messages are now handled by invalf(), which allows userspace to collect them directly. (7) cgroup1 parameter cleanup is now done in the context destructor rather than in the mount/get_tree and remount functions. Weirdies: (*) cgroup_do_get_tree() calls cset_cgroup_from_root() with locks held, but then uses the resulting pointer after dropping the locks. I'm told this is okay and needs commenting. (*) The cgroup refcount web. This really needs documenting. (*) cgroup2 only has one root? Add a suggestion from Thomas Gleixner in which the RDT enablement code is placed into its own function. [folded a leak fix from Andrey Vagin] Signed-off-by: David Howells <dhowells@redhat.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tejun Heo <tj@kernel.org> cc: Li Zefan <lizefan@huawei.com> cc: Johannes Weiner <hannes@cmpxchg.org> cc: cgroups@vger.kernel.org cc: fenghua.yu@intel.com Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-08kernfs: Allocating memory for kernfs_iattrs with kmem_cache.Ayush Mittal4-4/+9
Creating a new cache for kernfs_iattrs. Currently, memory is allocated with kzalloc() which always gives aligned memory. On ARM, this is 64 byte aligned. To avoid the wastage of memory in aligning the size requested, a new cache for kernfs_iattrs is created. Size of struct kernfs_iattrs is 80 Bytes. On ARM, it will come in kmalloc-128 slab. and it will come in kmalloc-192 slab if debug info is enabled. Extra bytes taken 48 bytes. Total number of objects created : 4096 Total saving = 48*4096 = 192 KB After creating new slab(When debug info is enabled) : sh-3.2# cat /proc/slabinfo ... kernfs_iattrs_cache 4069 4096 128 32 1 : tunables 0 0 0 : slabdata 128 128 0 ... All testing has been done on ARM target. Signed-off-by: Ayush Mittal <ayush.m@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17kill kernfs_pin_sb()Al Viro1-30/+0
unused now and impossible to use safely anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-01-17fix cgroup_do_mount() handling of failure exitsAl Viro1-2/+6
same story as with last May fixes in sysfs (7b745a4e4051 "unfuck sysfs_mount()"); new_sb is left uninitialized in case of early errors in kernfs_mount_ns() and papering over it by treating any error from kernfs_mount_ns() as equivalent to !new_ns ends up conflating the cases when objects had never been transferred to a superblock with ones when that has happened and resulting new superblock had been dropped. Easily fixed (same way as in sysfs case). Additionally, there's a superblock leak on kernfs_node_dentry() failure *and* a dentry leak inside kernfs_node_dentry() itself - the latter on probably impossible errors, but the former not impossible to trigger (as the matter of fact, injecting allocation failures at that point *does* trigger it). Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-27kernfs: Improve kernfs_notify() poll notification latencyRadu Rendec1-12/+11
kernfs_notify() does two notifications: poll and fsnotify. Originally, both notifications were done from scheduled work context and all that kernfs_notify() did was schedule the work. This patch simply moves the poll notification from the scheduled work handler to kernfs_notify(). The fsnotify notification still needs to be done from scheduled work context because it can sleep (it needs to lock a mutex). If the poll notification is time critical (the notified thread needs to wake as quickly as possible), it's better to do it from kernfs_notify() directly. One example is calling sysfs_notify_dirent() from a hardware interrupt handler to wake up a thread and handle the interrupt in user space. Signed-off-by: Radu Rendec <radu.rendec@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-26mm: zero-seek shrinkersJohannes Weiner1-0/+3
The page cache and most shrinkable slab caches hold data that has been read from disk, but there are some caches that only cache CPU work, such as the dentry and inode caches of procfs and sysfs, as well as the subset of radix tree nodes that track non-resident page cache. Currently, all these are shrunk at the same rate: using DEFAULT_SEEKS for the shrinker's seeks setting tells the reclaim algorithm that for every two page cache pages scanned it should scan one slab object. This is a bogus setting. A virtual inode that required no IO to create is not twice as valuable as a page cache page; shadow cache entries with eviction distances beyond the size of memory aren't either. In most cases, the behavior in practice is still fine. Such virtual caches don't tend to grow and assert themselves aggressively, and usually get picked up before they cause problems. But there are scenarios where that's not true. Our database workloads suffer from two of those. For one, their file workingset is several times bigger than available memory, which has the kernel aggressively create shadow page cache entries for the non-resident parts of it. The workingset code does tell the VM that most of these are expendable, but the VM ends up balancing them 2:1 to cache pages as per the seeks setting. This is a huge waste of memory. These workloads also deal with tens of thousands of open files and use /proc for introspection, which ends up growing the proc_inode_cache to absurdly large sizes - again at the cost of valuable cache space, which isn't a reasonable trade-off, given that proc inodes can be re-created without involving the disk. This patch implements a "zero-seek" setting for shrinkers that results in a target ratio of 0:1 between their objects and IO-backed caches. This allows such virtual caches to grow when memory is available (they do cache/avoid CPU work after all), but effectively disables them as soon as IO-backed objects are under pressure. It then switches the shrinkers for procfs and sysfs metadata, as well as excess page cache shadow nodes, to the new zero-seek setting. Link: http://lkml.kernel.org/r/20181009184732.762-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Domas Mituzas <dmituzas@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-16kernfs: Fix range checks in kernfs_get_target_pathBernd Edlinger1-1/+4
The terminating NUL byte is only there because the buffer is allocated with kzalloc(PAGE_SIZE, GFP_KERNEL), but since the range-check is off-by-one, and PAGE_SIZE==PATH_MAX, the returned string may not be zero-terminated if it is exactly PATH_MAX characters long. Furthermore also the initial loop may theoretically exceed PATH_MAX and cause a fault. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-18Merge tag 'driver-core-4.19-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are all of the driver core and related patches for 4.19-rc1. Nothing huge here, just a number of small cleanups and the ability to now stop the deferred probing after init happens. All of these have been in linux-next for a while with only a merge issue reported" * tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) base: core: Remove WARN_ON from link dependencies check drivers/base: stop new probing during shutdown drivers: core: Remove glue dirs from sysfs earlier driver core: remove unnecessary function extern declare sysfs.h: fix non-kernel-doc comment PM / Domains: Stop deferring probe at the end of initcall iommu: Remove IOMMU_OF_DECLARE iommu: Stop deferring probe at end of initcalls pinctrl: Support stopping deferred probe after initcalls dt-bindings: pinctrl: add a 'pinctrl-use-default' property driver core: allow stopping deferred probe after init driver core: add a debugfs entry to show deferred devices sysfs: Fix internal_create_group() for named group updates base: fix order of OF initialization linux/device.h: fix kernel-doc notation warning Documentation: update firmware loader fallback reference kobject: Replace strncpy with memcpy drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number kernfs: Replace strncpy with memcpy device: Add #define dev_fmt similar to #define pr_fmt ...
2018-07-20kernfs: allow creating kernfs objects with arbitrary uid/gidDmitry Torokhov5-7/+45
This change allows creating kernfs files and directories with arbitrary uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments. The "simple" kernfs_create_file() and kernfs_create_dir() are left alone and always create objects belonging to the global root. When creating symlinks ownership (uid/gid) is taken from the target kernfs object. Co-Developed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07kernfs: Replace strncpy with memcpyGuenter Roeck1-1/+1
gcc 8.1.0 complains: fs/kernfs/symlink.c:91:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/kernfs/symlink.c: In function 'kernfs_iop_get_link': fs/kernfs/symlink.c:88:14: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-14Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into ↵Arnd Bergmann2-6/+6
vfs-timespec64 Pull the timespec64 conversion from Deepa Dinamani: "The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The flag patch applies cleanly. I've not seen the timestamps update logic change often. The series applies cleanly on 4.17-rc6 and linux-next tip (top commit: next-20180517). I'm not sure how to merge this kind of a series with a flag patch. We are targeting 4.18 for this. Let me know if you have other suggestions. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. I've tried to keep the conversions with the script simple, to aid in the reviews. I've kept all the internal filesystem data structures and function signatures the same. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions." I've pulled it into a branch based on top of the NFS changes that are now in mainline, so I could resolve the non-obvious conflict between the two while merging. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani2-6/+6
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-06-05Merge tag 'driver-core-4.18-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the driver core patchset for 4.18-rc1. The large chunk of these are firmware core documentation and api updates. Nothing major there, just better descriptions for others to be able to understand the firmware code better. There's also a user for a new firmware api call. Other than that, there are some minor updates for debugfs, kernfs, and the driver core itself. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) driver core: hold dev's parent lock when needed driver-core: return EINVAL error instead of BUG_ON() driver core: add __printf verification to device_create_groups_vargs mm: memory_hotplug: use put_device() if device_register fail base: core: fix typo 'can by' to 'can be' debugfs: inode: debugfs_create_dir uses mode permission from parent debugfs: Re-use kstrtobool_from_user() Documentation: clarify firmware_class provenance and why we can't rename the module Documentation: remove stale firmware API reference Documentation: fix few typos and clarifications for the firmware loader ath10k: re-enable the firmware fallback mechanism for testmode ath10k: use firmware_request_nowarn() to load firmware firmware: add firmware_request_nowarn() - load firmware without warnings firmware_loader: make firmware_fallback_sysfs() print more useful firmware_loader: move kconfig FW_LOADER entries to its own file firmware_loader: replace ---help--- with help firmware_loader: enhance Kconfig documentation over FW_LOADER firmware_loader: document firmware_sysfs_fallback() firmware: rename fw_sysfs_fallback to firmware_fallback_sysfs() firmware: use () to terminate kernel-doc function names ...
2018-05-21kernfs: deal with kernfs_fill_super() failuresAl Viro1-0/+1
make sure that info->node is initialized early, so that kernfs_kill_sb() can list_del() it safely. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-23fs: kernfs: Adding new return type vm_fault_tSouptick Joarder1-4/+4
Use new return type vm_fault_t for page_mkwrite and fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Reference id -> 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-09Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-19kernfs: fix regression in kernfs_fop_write caused by wrong typeIvan Vecera1-1/+1
Commit b7ce40cff0b9 ("kernfs: cache atomic_write_len in kernfs_open_file") changes type of local variable 'len' from ssize_t to size_t. This change caused that the *ppos value is updated also when the previous write callback failed. Mentioned snippet: ... len = ops->write(...); <- return value can be negative ... if (len > 0) <- true here in this case *ppos += len; ... Fixes: b7ce40cff0b9 ("kernfs: cache atomic_write_len in kernfs_open_file") Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27fs: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds1-1/+1
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds6-42/+197
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-01kernfs: checking for IS_ERR() instead of NULLDan Carpenter1-2/+2
The kernfs_get_inode() returns NULL on error, it never returns error pointers. Fixes: aa8188253474 ("kernfs: add exportfs operations") Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-28kernfs: Clarify lockdep name for kn->countWaiman Long1-1/+1
The reference count in kernfs_node structure is treated like a rwsem by using lockdep instrumentation code. The lockdep name, however, is still "s_active" which is carried over from the old sysfs code. As s_active is no longer the variable name, its use may confuse users on where the lock is when it is reported by lockdep. So it is changed to "kn->count" which is how this variable is normally referenced in kernfs code. Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-29blktrace: add an option to allow displaying cgroup pathShaohua Li1-0/+19
By default we output cgroup id in blktrace. This adds an option to display cgroup path. Since get cgroup path is a relativly heavy operation, we don't enable it by default. with the option enabled, blktrace will output something like this: dd-1353 [007] d..2 293.015252: 8,0 /test/level D R 24 + 8 [dd] Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-29kernfs: add exportfs operationsShaohua Li1-0/+56
Now we have the facilities to implement exportfs operations. The idea is cgroup can export the fhandle info to userspace, then userspace uses fhandle to find the cgroup name. Another example is userspace can get fhandle for a cgroup and BPF uses the fhandle to filter info for the cgroup. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-29kernfs: introduce kernfs_node_idShaohua Li3-9/+9
inode number and generation can identify a kernfs node. We are going to export the identification by exportfs operations, so put ino and generation into a separate structure. It's convenient when later patches use the identification. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-29kernfs: don't set dentry->d_fsdataShaohua Li6-31/+27
When working on adding exportfs operations in kernfs, I found it's hard to initialize dentry->d_fsdata in the exportfs operations. Looks there is no way to do it without race condition. Look at the kernfs code closely, there is no point to set dentry->d_fsdata. inode->i_private already points to kernfs_node, and we can get inode from a dentry. So this patch just delete the d_fsdata usage. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-29kernfs: add an API to get kernfs node from inode numberShaohua Li3-1/+69
Add an API to get kernfs node from inode number. We will need this to implement exportfs operations. This API will be used in blktrace too later, so it should be as fast as possible. To make the API lock free, kernfs node is freed in RCU context. And we depend on kernfs_node count/ino number to filter out stale kernfs nodes. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-29kernfs: implement i_generationShaohua Li2-1/+10
Set i_generation for kernfs inode. This is required to implement exportfs operations. The generation is 32-bit, so it's possible the generation wraps up and we find stale files. To reduce the posssibility, we don't reuse inode numer immediately. When the inode number allocation wraps, we increase generation number. In this way generation/inode number consist of a 64-bit number which is unlikely duplicated. This does make the idr tree more sparse and waste some memory. Since idr manages 32-bit keys, idr uses a 6-level radix tree, each level covers 6 bits of the key. In a 100k inode kernfs, the worst case will have around 300k radix tree node. Each node is 576bytes, so the tree will use about ~150M memory. Sounds not too bad, if this really is a problem, we should find better data structure. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>