summaryrefslogtreecommitdiffstats
path: root/fs/jbd2
AgeCommit message (Collapse)AuthorFilesLines
2017-02-20Merge tag 'ext4_for_linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "For this cycle we add support for the shutdown ioctl, which is primarily used for testing, but which can be useful on production systems when a scratch volume is being destroyed and the data on it doesn't need to be saved. This found (and we fixed) a number of bugs with ext4's recovery to corrupted file system --- the bugs increased the amount of data that could be potentially lost, and in the case of the inline data feature, could cause the kernel to BUG. Also included are a number of other bug fixes, including in ext4's fscrypt, DAX, inline data support" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits) ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN ext4: fix fencepost in s_first_meta_bg validation ext4: don't BUG when truncating encrypted inodes on the orphan list ext4: do not use stripe_width if it is not set ext4: fix stripe-unaligned allocations dax: assert that i_rwsem is held exclusive for writes ext4: fix DAX write locking ext4: add EXT4_IOC_GOINGDOWN ioctl ext4: add shutdown bit and check for it ext4: rename s_resize_flags to s_ext4_flags ext4: return EROFS if device is r/o and journal replay is needed ext4: preserve the needs_recovery flag when the journal is aborted jbd2: don't leak modified metadata buffers on an aborted journal ext4: fix inline data error paths ext4: move halfmd4 into hash.c directly ext4: fix use-after-iput when fscrypt contexts are inconsistent jbd2: fix use after free in kjournald2() ext4: fix data corruption in data=journal mode ext4: trim allocation requests to group size ext4: replace BUG_ON with WARN_ON in mb_find_extent() ...
2017-02-04jbd2: don't leak modified metadata buffers on an aborted journalTheodore Ts'o1-1/+3
If the journal has been aborted, we shouldn't mark the underlying buffer head as dirty, since that will cause the metadata block to get modified. And if the journal has been aborted, we shouldn't allow this since it will almost certainly lead to a corrupted file system. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-02-01jbd2: fix use after free in kjournald2()Sahitya Tummala1-1/+1
Below is the synchronization issue between unmount and kjournald2 contexts, which results into use after free issue in kjournald2(). Fix this issue by using journal->j_state_lock to synchronize the wait_event() done in journal_kill_thread() and the wake_up() done in kjournald2(). TASK 1: umount cmd: |--jbd2_journal_destroy() { |--journal_kill_thread() { write_lock(&journal->j_state_lock); journal->j_flags |= JBD2_UNMOUNT; ... write_unlock(&journal->j_state_lock); wake_up(&journal->j_wait_commit); TASK 2 wakes up here: kjournald2() { ... checks JBD2_UNMOUNT flag and calls goto end-loop; ... end_loop: write_unlock(&journal->j_state_lock); journal->j_task = NULL; --> If this thread gets pre-empted here, then TASK 1 wait_event will exit even before this thread is completely done. wait_event(journal->j_wait_done_commit, journal->j_task == NULL); ... write_lock(&journal->j_state_lock); write_unlock(&journal->j_state_lock); } |--kfree(journal); } } wake_up(&journal->j_wait_done_commit); --> this step now results into use after free issue. } Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-01-14fs/jbd2, locking/mutex, sched/wait: Use mutex_lock_io() for ↵Tejun Heo2-7/+7
journal->j_checkpoint_mutex When an ext4 fs is bogged down by a lot of metadata IOs (in the reported case, it was deletion of millions of files, but any massive amount of journal writes would do), after the journal is filled up, tasks which try to access the filesystem and aren't currently performing the journal writes end up waiting in __jbd2_log_wait_for_space() for journal->j_checkpoint_mutex. Because those mutex sleeps aren't marked as iowait, this condition can lead to misleadingly low iowait and /proc/stat:procs_blocked. While iowait propagation is far from strict, this condition can be triggered fairly easily and annotating these sleeps correctly helps initial diagnosis quite a bit. Use the new mutex_lock_io() for journal->j_checkpoint_mutex so that these sleeps are properly marked as iowait. Reported-by: Mingbo Wan <mingbo@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1477673892-28940-5-git-send-email-tj@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-13Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds4-13/+15
Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
2016-11-01block,fs: use REQ_* flags directlyChristoph Hellwig4-13/+15
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12jbd2: fix incorrect unlock on j_list_lockTaesoo Kim1-1/+2
When 'jh->b_transaction == transaction' (asserted by below) J_ASSERT_JH(jh, (jh->b_transaction == transaction || ... 'journal->j_list_lock' will be incorrectly unlocked, since the the lock is aquired only at the end of if / else-if statements (missing the else case). Signed-off-by: Taesoo Kim <tsgatesv@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Fixes: 6e4862a5bb9d12be87e4ea5d9a60836ebed71d28 Cc: stable@vger.kernel.org # 3.14+
2016-10-11fs: use mapping_set_error instead of opencoded set_bitMichal Hocko1-2/+1
The mapping_set_error() helper sets the correct AS_ flag for the mapping so there is no reason to open code it. Use the helper directly. [akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO] Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-22jbd2: fix lockdep annotation in add_transaction_credits()Jan Kara1-2/+4
Thomas has reported a lockdep splat hitting in add_transaction_credits(). The problem is that that function calls jbd2_might_wait_for_commit() while holding j_state_lock which is wrong (we do not really wait for transaction commit while holding that lock). Fix the problem by moving jbd2_might_wait_for_commit() into places where we are ready to wait for transaction commit and thus j_state_lock is unlocked. Cc: stable@vger.kernel.org Fixes: 1eaa566d368b214d99cbb973647c1b0b8102a9ae Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-09-15jbd2: move more common code into journal_init_common()Geliang Tang1-81/+50
There are some repetitive code in jbd2_journal_init_dev() and jbd2_journal_init_inode(). So this patch moves the common code into journal_init_common() helper to simplify the code. And fix the coding style warnings reported by checkpatch.pl by the way. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2016-07-26Merge tag 'ext4_for_linus' of ↵Linus Torvalds3-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The major change this cycle is deleting ext4's copy of the file system encryption code and switching things over to using the copies in fs/crypto. I've updated the MAINTAINERS file to add an entry for fs/crypto listing Jaeguk Kim and myself as the maintainers. There are also a number of bug fixes, most notably for some problems found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also fixed is a writeback deadlock detected by generic/130, and some potential races in the metadata checksum code" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: verify extent header depth ext4: short-cut orphan cleanup on error ext4: fix reference counting bug on block allocation error MAINTAINRES: fs-crypto maintainers update ext4 crypto: migrate into vfs's crypto engine ext2: fix filesystem deadlock while reading corrupted xattr block ext4: fix project quota accounting without quota limits enabled ext4: validate s_reserved_gdt_blocks on mount ext4: remove unused page_idx ext4: don't call ext4_should_journal_data() on the journal inode ext4: Fix WARN_ON_ONCE in ext4_commit_super() ext4: fix deadlock during page writeback ext4: correct error value of function verifying dx checksum ext4: avoid modifying checksum fields directly during checksum verification ext4: check for extents that wrap around jbd2: make journal y2038 safe jbd2: track more dependencies on transaction commit jbd2: move lockdep tracking to journal_s jbd2: move lockdep instrumentation for jbd2 handles ext4: respect the nobarrier mount option in nojournal mode ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds3-10/+10
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-06-30jbd2: make journal y2038 safeArnd Bergmann1-1/+1
The jbd2 journal stores the commit time in 64-bit seconds and 32-bit nanoseconds, which avoids an overflow in 2038, but it gets the numbers from current_kernel_time(), which uses 'long' seconds on 32-bit architectures. This simply changes the code to call current_kernel_time64() so we use 64-bit seconds consistently. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2016-06-30jbd2: track more dependencies on transaction commitJan Kara2-0/+5
So far we were tracking only dependency on transaction commit due to starting a new handle (which may require commit to start a new transaction). Now add tracking also for other cases where we wait for transaction commit. This way lockdep can catch deadlocks e. g. because we call jbd2_journal_stop() for a synchronous handle with some locks held which rank below transaction start. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-30jbd2: move lockdep tracking to journal_sJan Kara2-8/+7
Currently lockdep map is tracked in each journal handle. To be able to expand lockdep support to cover also other cases where we depend on transaction commit and where handle is not available, move lockdep map into struct journal_s. Since this makes the lockdep map shared for all handles, we have to use rwsem_acquire_read() for acquisitions now. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-30jbd2: move lockdep instrumentation for jbd2 handlesJan Kara1-2/+2
The transaction the handle references is free to commit once we've decremented t_updates counter. Move the lockdep instrumentation to that place. Currently it was a bit later which did not really matter but subsequent improvements to lockdep instrumentation would cause false positives with it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-24jbd2: get rid of superfluous __GFP_REPEATMichal Hocko1-25/+7
jbd2_alloc is explicit about its allocation preferences wrt. the allocation size. Sub page allocations go to the slab allocator and larger are using either the page allocator or vmalloc. This is all good but the logic is unnecessarily complex. 1) as per Ted, the vmalloc fallback is a left-over: : jbd2_alloc is only passed in the bh->b_size, which can't be PAGE_SIZE, so : the code path that calls vmalloc() should never get called. When we : conveted jbd2_alloc() to suppor sub-page size allocations in commit : d2eecb039368, there was an assumption that it could be called with a size : greater than PAGE_SIZE, but that's certaily not true today. Moreover vmalloc allocation might even lead to a deadlock because the callers expect GFP_NOFS context while vmalloc is GFP_KERNEL. 2) __GFP_REPEAT for requests <= PAGE_ALLOC_COSTLY_ORDER is ignored since the flag was introduced. Let's simplify the code flow and use the slab allocator for sub-page requests and the page allocator for others. Even though order > 0 is not currently used as per above leave that option open. Link: http://lkml.kernel.org/r/1464599699-30131-18-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-07block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie1-1/+1
To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have ll_rw_block users pass in op and flags separatelyMike Christie2-3/+3
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie2-7/+7
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-24Merge tag 'ext4_for_linus' of ↵Linus Torvalds3-5/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Fix a number of bugs, most notably a potential stale data exposure after a crash and a potential BUG_ON crash if a file has the data journalling flag enabled while it has dirty delayed allocation blocks that haven't been written yet. Also fix a potential crash in the new project quota code and a maliciously corrupted file system. In addition, fix some DAX-specific bugs, including when there is a transient ENOSPC situation and races between writes via direct I/O and an mmap'ed segment that could lead to lost I/O. Finally the usual set of miscellaneous cleanups" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: pre-zero allocated blocks for DAX IO ext4: refactor direct IO code ext4: fix race in transient ENOSPC detection ext4: handle transient ENOSPC properly for DAX dax: call get_blocks() with create == 1 for write faults to unwritten extents ext4: remove unmeetable inconsisteny check from ext4_find_extent() jbd2: remove excess descriptions for handle_s ext4: remove unnecessary bio get/put ext4: silence UBSAN in ext4_mb_init() ext4: address UBSAN warning in mb_find_order_for_block() ext4: fix oops on corrupted filesystem ext4: fix check of dqget() return value in ext4_ioctl_setproject() ext4: clean up error handling when orphan list is corrupted ext4: fix hang when processing corrupted orphaned inode list ext4: remove trailing \n from ext4_warning/ext4_error calls ext4: fix races between changing inode journal mode and ext4_writepages ext4: handle unwritten or delalloc buffers before enabling data journaling ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart() ext4: do not ask jbd2 to write data for delalloc buffers jbd2: add support for avoiding data writes during transaction commits ...
2016-04-24jbd2: add support for avoiding data writes during transaction commitsJan Kara3-5/+24
Currently when filesystem needs to make sure data is on permanent storage before committing a transaction it adds inode to transaction's inode list. During transaction commit, jbd2 writes back all dirty buffers that have allocated underlying blocks and waits for the IO to finish. However when doing writeback for delayed allocated data, we allocate blocks and immediately submit the data. Thus asking jbd2 to write dirty pages just unnecessarily adds more work to jbd2 possibly writing back other redirtied blocks. Add support to jbd2 to allow filesystem to ask jbd2 to only wait for outstanding data writes before committing a transaction and thus avoid unnecessary writes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-18Merge branch 'master' into for-nextJiri Kosina5-141/+96
Sync with Linus' tree so that patches against newer codebase can be applied. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-18Doc: treewide : Fix typos in DocBook/filesystem.xmlMasanari Iida2-4/+4
This patch fix spelling typos found in DocBook/filesystem.xml. It is because the file was generated from comments in code, I have to fix the comments in codes, instead of xml file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov3-5/+5
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-13jbd2: do not fail journal because of frozen_buffer allocation failureMichal Hocko1-17/+5
Journal transaction might fail prematurely because the frozen_buffer is allocated by GFP_NOFS request: [ 72.440013] do_get_write_access: OOM for frozen_buffer [ 72.440014] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.440015] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4735: Out of memory (...snipped....) [ 72.495559] do_get_write_access: OOM for frozen_buffer [ 72.495560] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.496839] do_get_write_access: OOM for frozen_buffer [ 72.496841] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.505766] Aborting journal on device sda1-8. [ 72.505851] EXT4-fs (sda1): Remounting filesystem read-only This wasn't a problem until "mm: page_alloc: do not lock up GFP_NOFS allocations upon OOM" because small GPF_NOFS allocations never failed. This allocation seems essential for the journal and GFP_NOFS is too restrictive to the memory allocator so let's use __GFP_NOFAIL here to emulate the previous behavior. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-09jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount pathOGAWA Hirofumi1-5/+12
On umount path, jbd2_journal_destroy() writes latest transaction ID (->j_tail_sequence) to be used at next mount. The bug is that ->j_tail_sequence is not holding latest transaction ID in some cases. So, at next mount, there is chance to conflict with remaining (not overwritten yet) transactions. mount (id=10) write transaction (id=11) write transaction (id=12) umount (id=10) <= the bug doesn't write latest ID mount (id=10) write transaction (id=11) crash mount [recovery process] transaction (id=11) transaction (id=12) <= valid transaction ID, but old commit must not replay Like above, this bug become the cause of recovery failure, or FS corruption. So why ->j_tail_sequence doesn't point latest ID? Because if checkpoint transactions was reclaimed by memory pressure (i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated. (And another case is, __jbd2_journal_clean_checkpoint_list() is called with empty transaction.) So in above cases, ->j_tail_sequence is not pointing latest transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not done too. So, to fix this problem with minimum changes, this patch updates ->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes, some optimizations would be possible to avoid unnecessary REQ_FLUSH for example though.) BTW, journal->j_tail_sequence = ++journal->j_transaction_sequence; Increment of ->j_transaction_sequence seems to be unnecessary, but ext3 does this. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2016-02-22jbd2: save some atomic ops in __JI_COMMIT_RUNNING handlingJan Kara2-7/+7
Currently we used atomic bit operations to manipulate __JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are always written and read under j_list_lock. So just change the operations to standard bit operations. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: unify revoke and tag block checksum handlingJan Kara4-60/+23
Revoke and tag descriptor blocks are just different kinds of descriptor blocks and thus have checksum in the same place. Unify computation and checking of checksums for these. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: factor out common descriptor block initializationJan Kara3-18/+15
Descriptor block header is initialized in several places. Factor out the common code into jbd2_journal_get_descriptor_buffer(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: remove unnecessary arguments of jbd2_journal_write_revoke_recordsJan Kara2-20/+16
jbd2_journal_write_revoke_records() takes journal pointer and write_op, although journal can be obtained from the passed transaction and write_op is always WRITE_SYNC. Remove these superfluous arguments. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-01-06fs: use block_device name vsprintf helperDmitry Monakhov1-4/+2
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds1-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes for v4.4, including fixes for post-2038 time encodings, some endian conversion problems with ext4 encryption, potential memory leaks after truncate in data=journal mode, and an ocfs2 regression caused by a jbd2 performance improvement" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix null committed data return in undo_access ext4: add "static" to ext4_seq_##name##_fops struct ext4: fix an endianness bug in ext4_encrypted_follow_link() ext4: fix an endianness bug in ext4_encrypted_zeroout() jbd2: Fix unreclaimed pages after truncate in data=journal mode ext4: Fix handling of extended tv_sec
2015-12-04jbd2: fix null committed data return in undo_accessJunxiao Bi1-3/+7
introduced jbd2_write_access_granted() to improve write|undo_access speed, but missed to check the status of b_committed_data which caused a kernel panic on ocfs2. [ 6538.405938] ------------[ cut here ]------------ [ 6538.406686] kernel BUG at fs/ocfs2/suballoc.c:2400! [ 6538.406686] invalid opcode: 0000 [#1] SMP [ 6538.406686] Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront xen_fbfront parport_pc parport pcspkr i2c_piix4 acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix cirrus ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect i2c_core syscopyarea dm_mirror dm_region_hash dm_log dm_mod [ 6538.406686] CPU: 1 PID: 16265 Comm: mmap_truncate Not tainted 4.3.0 #1 [ 6538.406686] Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 [ 6538.406686] task: ffff88007c2bab00 ti: ffff880075b78000 task.ti: ffff880075b78000 [ 6538.406686] RIP: 0010:[<ffffffffa06a286b>] [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP: 0018:ffff880075b7b7f8 EFLAGS: 00010246 [ 6538.406686] RAX: ffff8800760c5b40 RBX: ffff88006c06a000 RCX: ffffffffa06e6df0 [ 6538.406686] RDX: 0000000000000000 RSI: ffff88007a6f6ea0 RDI: ffff88007a760430 [ 6538.406686] RBP: ffff880075b7b878 R08: 0000000000000002 R09: 0000000000000001 [ 6538.406686] R10: ffffffffa06769be R11: 0000000000000000 R12: 0000000000000001 [ 6538.406686] R13: ffffffffa06a1750 R14: 0000000000000001 R15: ffff88007a6f6ea0 [ 6538.406686] FS: 00007f17fde30720(0000) GS:ffff88007f040000(0000) knlGS:0000000000000000 [ 6538.406686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6538.406686] CR2: 0000000000601730 CR3: 000000007aea0000 CR4: 00000000000406e0 [ 6538.406686] Stack: [ 6538.406686] ffff88007c2bb5b0 ffff880075b7b8e0 ffff88007a7604b0 ffff88006c640800 [ 6538.406686] ffff88007a7604b0 ffff880075d77390 0000000075b7b878 ffffffffa06a309d [ 6538.406686] ffff880075d752d8 ffff880075b7b990 ffff880075b7b898 0000000000000000 [ 6538.406686] Call Trace: [ 6538.406686] [<ffffffffa06a309d>] ? ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2] [ 6538.406686] [<ffffffffa06a3654>] _ocfs2_free_suballoc_bits+0xe4/0x320 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a397e>] _ocfs2_free_clusters+0xee/0x210 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa0682d50>] ? ocfs2_extend_trans+0x50/0x1a0 [ocfs2] [ 6538.406686] [<ffffffffa06a3ad5>] ocfs2_free_clusters+0x15/0x20 [ocfs2] [ 6538.406686] [<ffffffffa065072c>] ocfs2_replay_truncate_records+0xfc/0x290 [ocfs2] [ 6538.406686] [<ffffffffa06843ac>] ? ocfs2_start_trans+0xec/0x1d0 [ocfs2] [ 6538.406686] [<ffffffffa0654600>] __ocfs2_flush_truncate_log+0x140/0x2d0 [ocfs2] [ 6538.406686] [<ffffffffa0654394>] ? ocfs2_reserve_blocks_for_rec_trunc.clone.0+0x44/0x170 [ocfs2] [ 6538.406686] [<ffffffffa065acd4>] ocfs2_remove_btree_range+0x374/0x630 [ocfs2] [ 6538.406686] [<ffffffffa017486b>] ? jbd2_journal_stop+0x25b/0x470 [jbd2] [ 6538.406686] [<ffffffffa065d5b5>] ocfs2_commit_truncate+0x305/0x670 [ocfs2] [ 6538.406686] [<ffffffffa0683430>] ? ocfs2_journal_access_eb+0x20/0x20 [ocfs2] [ 6538.406686] [<ffffffffa067adb7>] ocfs2_truncate_file+0x297/0x380 [ocfs2] [ 6538.406686] [<ffffffffa01759e4>] ? jbd2_journal_begin_ordered_truncate+0x64/0xc0 [jbd2] [ 6538.406686] [<ffffffffa067c7a2>] ocfs2_setattr+0x572/0x860 [ocfs2] [ 6538.406686] [<ffffffff810e4a3f>] ? current_fs_time+0x3f/0x50 [ 6538.406686] [<ffffffff812124b7>] notify_change+0x1d7/0x340 [ 6538.406686] [<ffffffff8121abf9>] ? generic_getxattr+0x79/0x80 [ 6538.406686] [<ffffffff811f5876>] do_truncate+0x66/0x90 [ 6538.406686] [<ffffffff81120e30>] ? __audit_syscall_entry+0xb0/0x110 [ 6538.406686] [<ffffffff811f5bb3>] do_sys_ftruncate.clone.0+0xf3/0x120 [ 6538.406686] [<ffffffff811f5bee>] SyS_ftruncate+0xe/0x10 [ 6538.406686] [<ffffffff816aa2ae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 6538.406686] Code: 28 48 81 ee b0 04 00 00 48 8b 92 50 fb ff ff 48 8b 80 b0 03 00 00 48 39 90 88 00 00 00 0f 84 30 fe ff ff 0f 0b eb fe 0f 0b eb fe <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 6538.406686] RIP [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP <ffff880075b7b7f8> [ 6538.691128] ---[ end trace 31cd7011d6770d7e ]--- [ 6538.694492] Kernel panic - not syncing: Fatal exception [ 6538.695484] Kernel Offset: disabled Fixes: de92c8caf16c("jbd2: speedup jbd2_journal_get_[write|undo]_access()") Cc: <stable@vger.kernel.org> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-11-24jbd2: Fix unreclaimed pages after truncate in data=journal modeJan Kara1-0/+2
Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by: Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b794130b130e77ffa975bb58cb843744f9ae5 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-11-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman1-2/+2
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-18ext4, jbd2: ensure entering into panic after recording an error in superblockDaeho Jeong1-1/+5
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the journaling will be aborted first and the error number will be recorded into JBD2 superblock and, finally, the system will enter into the panic state in "errors=panic" option. But, in the rare case, this sequence is little twisted like the below figure and it will happen that the system enters into panic state, which means the system reset in mobile environment, before completion of recording an error in the journal superblock. In this case, e2fsck cannot recognize that the filesystem failure occurred in the previous run and the corruption wouldn't be fixed. Task A Task B ext4_handle_error() -> jbd2_journal_abort() -> __journal_abort_soft() -> __jbd2_journal_abort_hard() | -> journal->j_flags |= JBD2_ABORT; | | __ext4_abort() | -> jbd2_journal_abort() | | -> __journal_abort_soft() | | -> if (journal->j_flags & JBD2_ABORT) | | return; | -> panic() | -> jbd2_journal_update_sb_errno() Tested-by: Hobin Woo <hobin.woo@samsung.com> Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-10-17jbd2: fix checkpoint list cleanupJan Kara1-5/+3
Unlike comments and expectation of callers journal_clean_one_cp_list() returned 1 not only if it freed the transaction but also if it freed some buffers in the transaction. That could make __jbd2_journal_clean_checkpoint_list() skip processing t_checkpoint_io_list and continue with processing the next transaction. This is mostly a cosmetic issue since the only result is we can sometimes free less memory than we could. But it's still worth fixing. Fix journal_clean_one_cp_list() to return 1 only if the transaction was really freed. Fixes: 50849db32a9f529235a84bcc84a6b8e631b1d0ec Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-10-17jbd2: clean up feature test macros with predicate functionsDarrick J. Wong4-33/+23
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17ext4: call out CRC and corruption errors with specific error codesDarrick J. Wong2-5/+6
Instead of overloading EIO for CRC errors and corrupt structures, return the same error codes that XFS returns for the same issues. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-15jbd2: gate checksum calculations on crc driver presence, not sb flagsDarrick J. Wong1-3/+3
Change the journal's checksum functions to gate on whether or not the crc32c driver is loaded, and gate the loading on the superblock bits. This prevents a journal crash if someone loads a journal in no-csum mode and then randomizes the superblock, thus flipping on the feature bits. Tested-By: Nikolay Borisov <kernel@kyup.com> Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-08-04jbd2: limit number of reserved creditsLukas Czerner1-9/+27
Currently there is no limitation on number of reserved credits we can ask for. If we ask for more reserved credits than 1/2 of maximum transaction size, or if total number of credits exceeds the maximum transaction size per operation (which is currently only possible with the former) we will spin forever in start_this_handle(). Fix this by adding this limitation at the start of start_this_handle(). This patch also removes the credit limitation 1/2 of maximum transaction size, since we really only want to limit the number of reserved credits. There is not much point to limit the credits if there is still space in the journal. This accidentally also fixes the online resize, where due to the limitation of the journal credits we're unable to grow file systems with 1k block size and size between 16M and 32M. It has been partially fixed by 2c869b262a10ca99cb866d04087d75311587a30c, but not entirely. Thanks Jan Kara for helping me getting the correct fix. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-28jbd2: avoid infinite loop when destroying aborted journalJan Kara3-8/+44
Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal superblock fails" changed jbd2_cleanup_journal_tail() to return EIO when the journal is aborted. That makes logic in jbd2_log_do_checkpoint() bail out which is fine, except that jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make a progress in cleaning the journal. Without it jbd2_journal_destroy() just loops in an infinite loop. Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of jbd2_log_do_checkpoint() fails with error. Reported-by: Eryu Guan <guaneryu@gmail.com> Tested-by: Eryu Guan <guaneryu@gmail.com> Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-23ext4, jbd2: add REQ_FUA flag when recording an error in the superblockDaeho Jeong1-1/+1
When an error condition is detected, an error status should be recorded into superblocks of EXT4 or JBD2. However, the write request is submitted now without REQ_FUA flag, even in "barrier=1" mode, which is followed by panic() function in "errors=panic" mode. On mobile devices which make whole system reset as soon as kernel panic occurs, this write request containing an error flag will disappear just from storage cache without written to the physical cells. Therefore, when next start, even forever, the error flag cannot be shown in both superblocks, and e2fsck cannot fix the filesystem problems automatically, unless e2fsck is executed in force checking mode. [ Changed use test_opt(sb, BARRIER) of checking the journal flags -- TYT ] Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-12jbd2: speedup jbd2_journal_dirty_metadata()Jan Kara1-6/+32
It is often the case that we mark buffer as having dirty metadata when the buffer is already in that state (frequent for bitmaps, inode table blocks, superblock). Thus it is unnecessary to contend on grabbing journal head reference and bh_state lock. Avoid that by checking whether any modification to the buffer is needed before grabbing any locks or references. [ Note: this is a fixed version of commit 2143c1965a761, which was reverted in ebeaa8ddb3663b5 due to a false positive triggering of an assertion check. -- Ted ] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-27Revert "jbd2: speedup jbd2_journal_dirty_metadata()"Linus Torvalds1-27/+6
This reverts commit 2143c1965a761332ae417b22fd477b636e4f54ec. This commit seems to be the cause of the following jbd2 assertion failure: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:1325! invalid opcode: 0000 [#1] SMP Modules linked in: bnep bluetooth fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 ... CPU: 7 PID: 5509 Comm: gcc Not tainted 4.1.0-10944-g2a298679b411 #1 Hardware name: /DH87RL, BIOS RLH8710H.86A.0327.2014.0924.1645 09/24/2014 task: ffff8803bf866040 ti: ffff880308528000 task.ti: ffff880308528000 RIP: jbd2_journal_dirty_metadata+0x237/0x290 Call Trace: __ext4_handle_dirty_metadata+0x43/0x1f0 ext4_handle_dirty_dirent_node+0xde/0x160 ? jbd2_journal_get_write_access+0x36/0x50 ext4_delete_entry+0x112/0x160 ? __ext4_journal_start_sb+0x52/0xb0 ext4_unlink+0xfa/0x260 vfs_unlink+0xec/0x190 do_unlinkat+0x24a/0x270 SyS_unlink+0x11/0x20 entry_SYSCALL_64_fastpath+0x12/0x6a ---[ end trace ae033ebde8d080b4 ]--- which is not easily reproducible (I've seen it just once, and then Ted was able to reproduce it once). Revert it while Ted and Jan try to figure out what is wrong. Cc: Jan Kara <jack@suse.cz> Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-8/+2
Merge second patchbomb from Andrew Morton: - most of the rest of MM - lots of misc things - procfs updates - printk feature work - updates to get_maintainer, MAINTAINERS, checkpatch - lib/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) exit,stats: /* obey this comment */ coredump: add __printf attribute to cn_*printf functions coredump: use from_kuid/kgid when formatting corename fs/reiserfs: remove unneeded cast NILFS2: support NFSv2 export fs/befs/btree.c: remove unneeded initializations fs/minix: remove unneeded cast init/do_mounts.c: add create_dev() failure log kasan: remove duplicate definition of the macro KASAN_FREE_PAGE fs/efs: femove unneeded cast checkpatch: emit "NOTE: <types>" message only once after multiple files checkpatch: emit an error when there's a diff in a changelog checkpatch: validate MODULE_LICENSE content checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr() checkpatch: fix processing of MEMSET issues checkpatch: suggest using ether_addr_equal*() checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files checkpatch: remove local from codespell path checkpatch: add --showfile to allow input via pipe to show filenames ...
2015-06-25fs/jbd2/journal.c: use strreplace()Rasmus Villemoes1-8/+2
In one case, we eliminate a local variable; in the other a strlen() call and some .text. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 10:39:02 +0000