| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The new GLF_INSTANTIATE_NEEDED flag obsoletes the old rgrp flag
GFS2_RDF_UPTODATE, so this patch replaces it like we did with inodes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
With the addition of the new GLF_INSTANTIATE_NEEDED flag, the
GIF_INVALID flag is now redundant. This patch removes it.
Since inode_instantiate is only called when instantiation is needed,
the check in inode_instantiate is removed too.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, when a glock was locked, the very first holder on the
queue would unlock the lockref and call the go_instantiate glops function
(if one existed), unless GL_SKIP was specified. When we introduced the new
node-scope concept, we allowed multiple holders to lock glocks in EX mode
and share the lock.
But node-scope introduced a new problem: if the first holder has GL_SKIP
and the next one does NOT, since it is not the first holder on the queue,
the go_instantiate op was not called. Eventually the GL_SKIP holder may
call the instantiate sub-function (e.g. gfs2_rgrp_bh_get) but there was
still a window of time in which another non-GL_SKIP holder assumes the
instantiate function had been called by the first holder. In the case of
rgrp glocks, this led to a NULL pointer dereference on the buffer_heads.
This patch tries to fix the problem by introducing two new glock flags:
GLF_INSTANTIATE_NEEDED, which keeps track of when the instantiate function
needs to be called to "fill in" or "read in" the object before it is
referenced.
GLF_INSTANTIATE_IN_PROG which is used to determine when a process is
in the process of reading in the object. Whenever a function needs to
reference the object, it checks the GLF_INSTANTIATE_NEEDED flag, and if
set, it sets GLF_INSTANTIATE_IN_PROG and calls the glops "go_instantiate"
function.
As before, the gl_lockref spin_lock is unlocked during the IO operation,
which may take a relatively long amount of time to complete. While
unlocked, if another process determines go_instantiate is still needed,
it sees GLF_INSTANTIATE_IN_PROG is set, and waits for the go_instantiate
glop operation to be completed. Once GLF_INSTANTIATE_IN_PROG is cleared,
it needs to check GLF_INSTANTIATE_NEEDED again because the other process's
go_instantiate operation may not have been successful.
Functions that previously called the instantiate sub-functions now call
directly into gfs2_instantiate so the new bits are managed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, the go_lock glock operations (glops) did not do
any actual locking. They were used to instantiate objects, like reading
in dinodes and rgrps from the media.
This patch renames the functions to go_instantiate for clarity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Now that gfs2_file_buffered_write is the only remaining user of
ip->i_gh, we can move the glock holder to the stack (or rather, use the
one we already have on the stack); there is no need for keeping the
holder in the inode anymore.
This is slightly complicated by the fact that we're using ip->i_gh for
the statfs inode in gfs2_file_buffered_write as well. Writing to the
statfs inode isn't very common, so allocate the statfs holder
dynamically when needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch introduces a new HIF_MAY_DEMOTE flag and infrastructure that
will allow glocks to be demoted automatically on locking conflicts.
When a locking request comes in that isn't compatible with the locking
state of an active holder and that holder has the HIF_MAY_DEMOTE flag
set, the holder will be demoted before the incoming locking request is
granted.
Note that this mechanism demotes active holders (with the HIF_HOLDER
flag set), while before we were only demoting glocks without any active
holders. This allows processes to keep hold of locks that may form a
cyclic locking dependency; the core glock logic will then break those
dependencies in case a conflicting locking request occurs. We'll use
this to avoid giving up the inode glock proactively before faulting in
pages.
Processes that allow a glock holder to be taken away indicate this by
calling gfs2_holder_allow_demote(), which sets the HIF_MAY_DEMOTE flag.
Later, they call gfs2_holder_disallow_demote() to clear the flag again,
and then they check if their holder is still queued: if it is, they are
still holding the glock; if it isn't, they can re-acquire the glock (or
abort).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Holder flag HIF_FIRST is no longer used or needed, so remove it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, several functions in gfs2 related to the updating
of the statfs file used a newly acquired/read buffer_head for the
local statfs file. This is completely unnecessary, because other nodes
should never update it. Recreating the buffer is a waste of time.
This patch allows gfs2 to read in the local statefs buffer_head at
mount time and keep it around until unmount time.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The only glock that uses go_xmote_bh glops function is the freeze glock
which uses freeze_go_xmote_bh. It does not use its gh parameter, so
this patch eliminates the unneeded parameter.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git
Merge the resource group glock sharing feature and the revoke accounting rework.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In the log, revokes are stored as a revoke descriptor (struct
gfs2_log_descriptor), followed by zero or more additional revoke blocks
(struct gfs2_meta_header). On filesystems with a blocksize of 4k, the
revoke descriptor contains up to 503 revokes, and the metadata blocks
contain up to 509 revokes each. We've so far been reserving space for
revokes in transactions in block granularity, so a lot more space than
necessary was being allocated and then released again.
This patch switches to assigning revokes to transactions individually
instead. Initially, space for the revoke descriptor is reserved and
handed out to transactions. When more revokes than that are reserved,
additional revoke blocks are added. When the log is flushed, the space
for the additional revoke blocks is released, but we keep the space for
the revoke descriptor block allocated.
Transactions may still reserve more revokes than they will actually need
in the end, but now we won't overshoot the target as much, and by only
returning the space for excess revokes at log flush time, we further
reduce the amount of contention between processes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Prepare for treating resource group glocks as exclusive among nodes but
shared among all tasks running on a node: introduce another layer of
node-specific locking that the local tasks can use to coordinate their
accesses.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add a rs_reserved field to struct gfs2_blkreserv to keep track of the number of
blocks reserved by this particular reservation, and a rd_reserved field to
struct gfs2_rgrpd to keep track of the total number of reserved blocks in the
resource group. Those blocks are exclusively reserved, as opposed to the
rs_requested / rd_requested blocks which are tracked in the reservation tree
(rd_rstree) and which can be stolen if necessary.
When making a reservation with gfs2_inplace_reserve, rs_reserved is set to
somewhere between ap->min_target and ap->target depending on the number of free
blocks in the resource group. When allocating blocks with gfs2_alloc_blocks,
rs_reserved is decremented accordingly. Eventually, any reserved but not
consumed blocks are returned to the resource group by gfs2_inplace_release.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
We keep track of what we've so far been referring to as reservations in
rd_rstree: the nodes in that tree indicate where in a resource group we'd
like to allocate the next couple of blocks for a particular inode. Local
processes take those as hints, but they may still "steal" blocks from those
extents, so when actually allocating a block, we must double check in the
bitmap whether that block is actually still free. Likewise, other cluster
nodes may "steal" such blocks as well.
One of the following patches introduces resource group glock sharing, i.e.,
sharing of an exclusively locked resource group glock among local processes to
speed up allocations. To make that work, we'll need to keep track of how many
blocks we've actually reserved for each inode, so we end up with two different
kinds of reservations.
Distinguish these two kinds by referring to blocks which are reserved but may
still be "stolen" as "requested". This rename also makes it more obvious that
rs_requested and rd_requested are strongly related.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Turn on rgrplvb by default for sb_fs_format > 1801.
Mount options still have to override this so a new args field to
differentiate between 'off' and 'not specified' is added, and the new
default is applied only when it's not specified.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Keep the current value of the updated log tail in the super block as
sb_log_flush_tail instead of computing it on the fly. This avoids
unnecessary sd_ail_lock taking and cleans up the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This counter and the associated wait queue are only used so that
gfs2_make_fs_ro can efficiently wait for all pending log space
allocations to fail after setting the filesystem to read-only. This
comes at the cost of waking up that wait queue very frequently.
Instead, when gfs2_log_reserve fails because the filesystem has become
read-only, Wake up sd_log_waitq. In gfs2_make_fs_ro, set the file
system read-only and then wait until all the log space has been
released. Give up and report the problem after a while. With that,
sd_reserving_log and sd_reserving_log_wait can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Replace the TR_ALLOCED flag by its inverse, TR_ONSTACK: that way, the flag only
needs to be set in the exceptional case of on-stack transactions. Split off
__gfs2_trans_begin from gfs2_trans_begin and use it to replace the open-coded
version in gfs2_ail_empty_gl.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The recovery func can recover multiple journals, but they were all using
the same bio. This resulted in use-after-free related to sdp->sd_log_bio.
This patch moves the variable to the journal descriptor, jd, so that
every recovery can operate on its own bio. And hopefully we never run out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
GFS2 uses struct gfs2_rbm to represent a filesystem block number as a
bit position within a resource group. This representation is used in
the bitmap manipulation code to prevent excessive conversions between
block numbers and bit positions, but also in struct gfs2_blkreserv which
is part of struct gfs2_inode, to mark the start of a reservation. In
the inode, the bit position representation makes less sense: first, the
start position is used as a block number about as often as a bit
position; second, the bit position representation makes the code
unnecessarily complicated and difficult to read.
Therefore, change struct gfs2_blkreserv to represent the start of a
reservation as a block number instead of a bit position. (This requires
keeping track of the resource group in gfs2_blkreserv separately.) With
that change, various things can be slightly simplified, and struct
gfs2_rbm can be moved to rgrp.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Since commit a0e3cc65fa29 ("gfs2: Turn gl_delete into a delayed work"), we're
cancelling any pending delete work of an iopen glock before attaching a new
inode to that glock in gfs2_create_inode. This means that delete_work_func can
no longer be queued or running when attaching the iopen glock to the new inode,
and we can revert commit a4923865ea07 ("GFS2: Prevent delete work from
occurring on glocks used for create"), which tried to achieve the same but in a
racy way.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch introduce a new globs attribute to define the subclass of the
glock lockref spinlock. This avoid the following lockdep warning, which
occurs when we lock an inode lock while an iopen lock is held:
============================================
WARNING: possible recursive locking detected
5.10.0-rc3+ #4990 Not tainted
--------------------------------------------
kworker/0:1/12 is trying to acquire lock:
ffff9067d45672d8 (&gl->gl_lockref.lock){+.+.}-{3:3}, at: lockref_get+0x9/0x20
but task is already holding lock:
ffff9067da308588 (&gl->gl_lockref.lock){+.+.}-{3:3}, at: delete_work_func+0x164/0x260
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&gl->gl_lockref.lock);
lock(&gl->gl_lockref.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/0:1/12:
#0: ffff9067c1bfdd38 ((wq_completion)delete_workqueue){+.+.}-{0:0}, at: process_one_work+0x1b7/0x540
#1: ffffac594006be70 ((work_completion)(&(&gl->gl_delete)->work)){+.+.}-{0:0}, at: process_one_work+0x1b7/0x540
#2: ffff9067da308588 (&gl->gl_lockref.lock){+.+.}-{3:3}, at: delete_work_func+0x164/0x260
stack backtrace:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.10.0-rc3+ #4990
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: delete_workqueue delete_work_func
Call Trace:
dump_stack+0x8b/0xb0
__lock_acquire.cold+0x19e/0x2e3
lock_acquire+0x150/0x410
? lockref_get+0x9/0x20
_raw_spin_lock+0x27/0x40
? lockref_get+0x9/0x20
lockref_get+0x9/0x20
delete_work_func+0x188/0x260
process_one_work+0x237/0x540
worker_thread+0x4d/0x3b0
? process_one_work+0x540/0x540
kthread+0x127/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Suggested-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
And read these in __get_log_header() from the log header.
Also make gfs2_statfs_change_out() non-static so it can be used
outside of super.c
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The gfs2_glock structure has a gl_vm member, introduced in commit 7005c3e4ae428
("GFS2: Use range based functions for rgrp sync/invalidation"), which stores
the location of resource groups within their address space. This structure is
in a union with iopen glock specific fields. It was introduced because at
unmount time, the resource group objects were destroyed before flushing out any
pending resource group glock work, and flushing out such work could require
flushing / truncating the address space.
Since commit b3422cacdd7e6 ("gfs2: Rework how rgrp buffer_heads are managed"),
any pending resource group glock work is flushed out before destroying the
resource group objects. So the resource group objects will now always exist in
rgrp_go_sync and rgrp_go_inval, and we now simply compute the gl_vm values
where needed instead of caching them. This also eliminates the union.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, glock.c maintained a flag, GLF_QUEUED, which indicated
when a glock had a holder queued. It was only checked for inode glocks,
although set and cleared by all glocks, and it was only used to determine
whether the glock should be held for the minimum hold time before releasing.
The problem is that the flag is not accurate at all. If a process holds
the glock, the flag is set. When they dequeue the glock, it only cleared
the flag in cases when the state actually changed. So if the state doesn't
change, the flag may still be set, even when nothing is queued.
This happens to iopen glocks often: the get held in SH, then the file is
closed, but the glock remains in SH mode.
We don't need a special flag to indicate this: we can simply tell whether
the glock has any items queued to the holders queue. It's a waste of cpu
time to maintain it.
This patch eliminates the flag in favor of simply checking list_empty
on the glock holders.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
syzkaller found the following splat with CONFIG_DEBUG_KOBJECT_RELEASE=y:
Read of size 1 at addr ffff000028e896b8 by task kworker/1:2/228
CPU: 1 PID: 228 Comm: kworker/1:2 Tainted: G S 5.9.0-rc8+ #101
Hardware name: linux,dummy-virt (DT)
Workqueue: events kobject_delayed_cleanup
Call trace:
dump_backtrace+0x0/0x4d8
show_stack+0x34/0x48
dump_stack+0x174/0x1f8
print_address_description.constprop.0+0x5c/0x550
kasan_report+0x13c/0x1c0
__asan_report_load1_noabort+0x34/0x60
memcmp+0xd0/0xd8
gfs2_uevent+0xc4/0x188
kobject_uevent_env+0x54c/0x1240
kobject_uevent+0x2c/0x40
__kobject_del+0x190/0x1d8
kobject_delayed_cleanup+0x2bc/0x3b8
process_one_work+0x96c/0x18c0
worker_thread+0x3f0/0xc30
kthread+0x390/0x498
ret_from_fork+0x10/0x18
Allocated by task 1110:
kasan_save_stack+0x28/0x58
__kasan_kmalloc.isra.0+0xc8/0xe8
kasan_kmalloc+0x10/0x20
kmem_cache_alloc_trace+0x1d8/0x2f0
alloc_super+0x64/0x8c0
sget_fc+0x110/0x620
get_tree_bdev+0x190/0x648
gfs2_get_tree+0x50/0x228
vfs_get_tree+0x84/0x2e8
path_mount+0x1134/0x1da8
do_mount+0x124/0x138
__arm64_sys_mount+0x164/0x238
el0_svc_common.constprop.0+0x15c/0x598
do_el0_svc+0x60/0x150
el0_svc+0x34/0xb0
el0_sync_handler+0xc8/0x5b4
el0_sync+0x15c/0x180
Freed by task 228:
kasan_save_stack+0x28/0x58
kasan_set_track+0x28/0x40
kasan_set_free_info+0x24/0x48
__kasan_slab_free+0x118/0x190
kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0x6c/0x210
kfree+0x13c/0x460
Use the same pattern as f2fs + ext4 where the kobject destruction must
complete before allowing the FS itself to be freed. This means that we
need an explicit free_sbd in the callers.
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[Also go to fail_free when init_names fails.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
In delete_work_func, if the iopen glock still has an inode attached,
limit the inode lookup to that specific generation number: in the likely
case that the inode was deleted on the node on which the inode's link
count dropped to zero, we can skip verifying the on-disk block type and
reading in the inode. The same applies if another node that had the
inode open managed to delete the inode before us.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When there's contention on the iopen glock, it means that the link count
of the corresponding inode has dropped to zero on a remote node which is
now trying to delete the inode. In that case, try to evict the inode so
that the iopen glock will be released, which will allow the remote node
to do its job.
When the inode is still open locally, the inode's reference count won't
drop to zero and so we'll keep holding the inode and its iopen glock.
The remote node will time out its request to grab the iopen glock, and
when the inode is finally closed locally, we'll try to delete it
ourself.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This requires flushing delayed work items in gfs2_make_fs_ro (which is called
before unmounting a filesystem).
When inodes are deleted and then recreated, pending gl_delete work items would
have no effect because the inode generations will have changed, so we can
cancel any pending gl_delete works before reusing iopen glocks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, multiple users called gfs2_qa_alloc which allocated
a qadata structure to the inode, if quotas are turned on. Later, in
file close or evict, the structure was deleted with gfs2_qa_delete.
But there can be several competing processes who need access to the
structure. There were races between file close (release) and the others.
Thus, a release could delete the structure out from under a process
that relied upon its existence. For example, chown.
This patch changes the management of the qadata structures to be
a get/put scheme. Function gfs2_qa_alloc has been changed to gfs2_qa_get
and if the structure is allocated, the count essentially starts out at
1. Function gfs2_qa_delete has been renamed to gfs2_qa_put, and the
last guy to decrement the count to 0 frees the memory.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, function do_xmote would try to sync out the glock
dirty data by calling the appropriate glops function XXX_go_sync()
but it did not check for a good return code. If the sync was not
possible due to an io error or whatever, do_xmote would continue on
and call go_inval and release the glock to other cluster nodes.
When those nodes go to replay the journal, they may already be holding
glocks for the journal records that should have been synced, but were
not due to the ignored error.
This patch introduces proper error code checking to the go_sync
family of glops functions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.
This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.
The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.
Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.
The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.
Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.
Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.
We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.
Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.
For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
We need to allow some glocks to be enqueued, dequeued, promoted, and demoted
when we're withdrawn. For example, to maintain metadata integrity, we should
disallow the use of inode and rgrp glocks when withdrawn. Other glocks, like
iopen or the transaction glocks may be safely used because none of their
metadata goes through the journal. So in general, we should disallow all
glocks with an address space, and allow all the others. One exception is:
we need to allow our active journal to be demoted so others may recover it.
Allowing glocks after withdraw gives us the ability to take appropriate
action (in a following patch) to have our journal properly replayed by
another node rather than just abandoning the current transactions and
pretending nothing bad happened, leaving the other nodes free to modify
the blocks we had in our journal, which may result in file system
corruption.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, gfs2 kept track of journal io errors in two
places sd_log_error and the SDF_AIL1_IO_ERROR flag in sd_flags.
This patch consolidates the two into sd_log_error so that it
reflects the first error encountered writing to the journal.
In future patches, we will take advantage of this by checking
this value rather than having to check both when reacting to
io errors.
In addition, this fixes a tight loop in unmount: If buffers
get on the ail1 list and an io error occurs elsewhere, the
ail1 list would never be cleared because they were always busy.
So unmount would hang, waiting for the ail1 list to empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, the rgrp code had a serious problem related to
how it managed buffer_heads for resource groups. The problem caused
file system corruption, especially in cases of journal replay.
When an rgrp glock was demoted to transfer ownership to a
different cluster node, do_xmote() first calls rgrp_go_sync and then
rgrp_go_inval, as expected. When it calls rgrp_go_sync, that called
gfs2_rgrp_brelse() that dropped the buffer_head reference count.
In most cases, the reference count went to zero, which is right.
However, there were other places where the buffers are handled
differently.
After rgrp_go_sync, do_xmote called rgrp_go_inval which called
gfs2_rgrp_brelse a second time, then rgrp_go_inval's call to
truncate_inode_pages_range would get rid of the pages in memory,
but only if the reference count drops to 0.
Unfortunately, gfs2_rgrp_brelse was setting bi->bi_bh = NULL.
So when rgrp_go_sync called gfs2_rgrp_brelse, it lost the pointer
to the buffer_heads in cases where the reference count was still 1.
Therefore, when rgrp_go_inval called gfs2_rgrp_brelse a second time,
it failed the check for "if (bi->bi_bh)" and thus failed to call
brelse a second time. Because of that, the reference count on those
buffers sometimes failed to drop from 1 to 0. And that caused
function truncate_inode_pages_range to keep the pages in page cache
rather than freeing them.
The next time the rgrp glock was acquired, the metadata read of
the rgrp buffers re-used the pages in memory, which were now
wrong because they were likely modified by the other node who
acquired the glock in EX (which is why we demoted the glock).
This re-use of the page cache caused corruption because changes
made by the other nodes were never seen, so the bitmaps were
inaccurate.
For some reason, the problem became most apparent when journal
replay forced the replay of rgrps in memory, which caused newer
rgrp data to be overwritten by the older in-core pages.
A big part of the problem was that the rgrp buffer were released
in multiple places: The go_unlock function would release them when
the glock was released rather than when the glock is demoted,
which is clearly wrong because our intent was to cache them until
the glock is demoted from SH or EX.
This patch attempts to clean up the mess and make one consistent
and centralized mechanism for managing the rgrp buffer_heads by
implementing several changes:
1. It eliminates the call to gfs2_rgrp_brelse() from rgrp_go_sync.
We don't want to release the buffers or zero the pointers when
syncing for the reasons stated above. It only makes sense to
release them when the glock is actually invalidated (go_inval).
And when we do, then we set the bh pointers to NULL.
2. The go_unlock function (which was only used for rgrps) is
eliminated, as we've talked about doing many times before.
The go_unlock function was called too early in the glock dq
process, and should not happen until the glock is invalidated.
3. It also eliminates the call to rgrp_brelse in gfs2_clear_rgrpd.
That will now happen automatically when the rgrp glocks are
demoted, and shouldn't happen any sooner or later than that.
Instead, function gfs2_clear_rgrpd has been modified to demote
the rgrp glocks, and therefore, free those pages, before the
remaining glocks are culled by gfs2_gl_hash_clear. This
prevents the gl_object from hanging around when the glocks are
culled.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
File system withdraws can be delayed when inconsistencies are
discovered when we cannot withdraw immediately, for example, when
critical spin_locks are held. But delaying the withdraw can cause
gfs2 to ignore the error and keep running for a short period of time.
For example, an rgrp glock may be dequeued and demoted while there
are still buffers that haven't been properly revoked, due to io
errors writing to the journal.
This patch introduces a new concept of a pending withdraw, which
means an inconsistency has been discovered and we need to withdraw
at the earliest possible opportunity. In these cases, we aren't
quite withdrawn yet, but we still need to not dequeue glocks and
other critical things. If we dequeue the glocks and the withdraw
results in our journal being replayed, the replay could overwrite
data that's been modified by a different node that acquired the
glock in the meantime.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This reverts commit e955537e3262de8e56f070b13817f525f472fa00.
Before patch e955537e32, tr_num_revoke tracked the number of revokes
added to the transaction, and tr_num_revoke_rm tracked how many
revokes were removed. But since revokes are queued off the sdp
(superblock) pointer, some transactions could remove more revokes
than they added. (e.g. revokes added by a different process).
Commit e955537e32 eliminated transaction variable tr_num_revoke_rm,
but in order to do so, it changed the accounting to always use
tr_num_revoke for its math. Since you can remove more revokes than
you add, tr_num_revoke could now become a negative value.
This negative value broke the assert in function gfs2_trans_end:
if (gfs2_assert_withdraw(sdp, (nbuf <=3D tr->tr_blocks) &&
(tr->tr_num_revoke <=3D tr->tr_revokes)))
One way to fix this is to simply remove the tr_num_revoke clause
from the assert and allow the value to become negative. Andreas
didn't like that idea, so instead, we decided to revert e955537e32.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The dlm lockspace is set up to have lock value blocks of GDLM_LVB_SIZE bytes,
and dlm is the only lock manager we support, so there is no point in claiming
that the lock value block could have any other size.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename sd_log_commited_revoke to sd_log_committed_revoke.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Every caller of function gfs2_struct2blk specified sizeof(u64).
This patch eliminates the unnecessary parameter and replaces the
size calculation with a new superblock variable that is computed
to be the maximum number of block pointers we can fit inside a
log descriptor, as is done for pointers per dinode and indirect
block.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more mount API conversions from Al Viro:
"Assorted conversions of options parsing to new API.
gfs2 is probably the most serious one here; the rest is trivial stuff.
Other things in what used to be #work.mount are going to wait for the
next cycle (and preferably go via git trees of the filesystems
involved)"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gfs2: Convert gfs2 to fs_context
vfs: Convert spufs to use the new mount API
vfs: Convert hypfs to use the new mount API
hypfs: Fix error number left in struct pointer member
vfs: Convert functionfs to use the new mount API
vfs: Convert bpf to use the new mount API
|
|
Convert gfs2 and gfs2meta to fs_context. Removes the duplicated vfs code
from gfs2_mount and instead uses the new vfs_get_block_super() before
switching the ->root to the appropriate dentry.
The mount option parsing has been converted to the new API and error
reporting for invalid options has been made more precise at the same
time.
All of the mount/remount code has been moved into ops_fstype.c
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: cluster-devel@redhat.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Because s_vfs_rename_mutex is not cluster-wide, multiple nodes can
reverse the roles of which directories are "old" and which are "new" for
the purposes of rename. This can cause deadlocks where two nodes end up
waiting for each other.
There can be several layers of directory dependencies across many nodes.
This patch fixes the problem by acquiring all gfs2_rename's inode glocks
asychronously and waiting for all glocks to be acquired. That way all
inodes are locked regardless of the order.
The timeout value for multiple asynchronous glocks is calculated to be
the total of the individual wait times for each glock times two.
Since gfs2_exchange is very similar to gfs2_rename, both functions are
patched in the same way.
A new async glock wait queue, sd_async_glock_wait, keeps a list of
waiters for these events. If gfs2's holder_wake function detects an
async holder, it wakes up any waiters for the event. The waiter only
tests whether any of its requests are still pending.
Since the glocks are sent to dlm asychronously, the wait function needs
to check to see which glocks, if any, were granted.
If a glock is granted by dlm (and therefore held), its minimum hold time
is checked and adjusted as necessary, as other glock grants do.
If the event times out, all glocks held thus far must be dequeued to
resolve any existing deadlocks. Then, if there are any outstanding
locking requests, we need to loop around and wait for dlm to respond to
those requests too. After we release all requests, we return -ESTALE to
the caller (vfs rename) which loops around and retries the request.
Node1 Node2
--------- ---------
1. Enqueue A Enqueue B
2. Enqueue B Enqueue A
3. A granted
6. B granted
7. Wait for B
8. Wait for A
9. A times out (since Node 1 holds A)
10. Dequeue B (since it was granted)
11. Wait for all requests from DLM
12. B Granted (since Node2 released it in step 10)
13. Rename
14. Dequeue A
15. DLM Grants A
16. Dequeue A (due to the timeout and since we
no longer have B held for our task).
17. Dequeue B
18. Return -ESTALE to vfs
19. VFS retries the operation, goto step 1.
This release-all-locks / acquire-all-locks may slow rename / exchange
down as both nodes struggle in the same way and do the same thing.
However, this will only happen when there is contention for the same
inodes, which ought to be rare.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, if a glock error was encountered, the glock with
the problem was dumped. But sometimes you may have lots of file systems
mounted, and that doesn't tell you which file system it was for.
This patch adds a new boolean parameter fsid to the dump_glock family
of functions. For non-error cases, such as dumping the glocks debugfs
file, the fsid is not dumped in order to keep lock dumps and glocktop
as clean as possible. For all error cases, such as GLOCK_BUG_ON, the
file system id is now printed. This will make it easier to debug.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
For its journal processing, gfs2 kept track of the number of buffers
added and removed on a per-transaction basis. These values are used
to calculate space needed in the journal. But while these calculations
make sense for the number of buffers, they make no sense for revokes.
Revokes are managed in their own list, linked from the superblock.
So it's entirely unnecessary to keep separate per-transaction counts
for revokes added and removed. A single count will do the same job.
Therefore, this patch combines the transaction revokes into a single
count.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
|
