summaryrefslogtreecommitdiffstats
path: root/fs/gfs2/aops.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-04gfs2: Minor PAGE_SIZE arithmetic cleanupsAndreas Gruenbacher1-2/+2
Replace divisions by PAGE_SIZE with shifts by PAGE_SHIFT and similar. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03gfs2: use iomap_bmap instead of generic_block_bmapChristoph Hellwig1-1/+1
No need to indirect through get_blocks and buffer_heads when we can just use the iomap version. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03gfs2: mark stuffed_readpage staticChristoph Hellwig1-2/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03gfs2: merge gfs2_writepage_common into gfs2_writepageChristoph Hellwig1-26/+6
There is no need to keep these two functions separate. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03gfs2: merge gfs2_writeback_aops and gfs2_ordered_aopsChristoph Hellwig1-25/+3
The only difference between the two is that gfs2_ordered_aops sets the set_page_dirty method to __set_page_dirty_buffers, but given that __set_page_dirty_buffers is the default, if no method is set, there is no need to to do that. Merge the two sets of operations into one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03gfs2: remove the unused gfs2_stuffed_write_end functionChristoph Hellwig1-41/+0
This function was overlooked when the write_begin and write_end address space operations were removed as part of gfs2's iomap conversion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-27gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWNBob Peterson1-2/+2
Before this patch, the superblock flag indicating when a file system is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to the more obvious SDF_WITHDRAWN. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this copyrighted material is made available to anyone wishing to use modify copy or redistribute it subject to the terms and conditions of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07gfs2: Fix iomap write page reclaim deadlockAndreas Gruenbacher1-4/+10
Since commit 64bc06bb32ee ("gfs2: iomap buffered write support"), gfs2 is doing buffered writes by starting a transaction in iomap_begin, writing a range of pages, and ending that transaction in iomap_end. This approach suffers from two problems: (1) Any allocations necessary for the write are done in iomap_begin, so when the data aren't journaled, there is no need for keeping the transaction open until iomap_end. (2) Transactions keep the gfs2 log flush lock held. When iomap_file_buffered_write calls balance_dirty_pages, this can end up calling gfs2_write_inode, which will try to flush the log. This requires taking the log flush lock which is already held, resulting in a deadlock. Fix both of these issues by not keeping transactions open from iomap_begin to iomap_end. Instead, start a small transaction in page_prepare and end it in page_done when necessary. Reported-by: Edwin Török <edvin.torok@citrix.com> Fixes: 64bc06bb32ee ("gfs2: iomap buffered write support") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-12-11gfs2: Fix the gfs2_invalidatepage descriptionAndreas Gruenbacher1-3/+3
The comment incorrectly states that the function always returns 0. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-12-11gfs2: Clean up gfs2_is_{ordered,writeback}Andreas Gruenbacher1-5/+5
The gfs2_is_ordered and gfs2_is_writeback checks are weird in that they implicitly check for !gfs2_is_jdata. This makes understanding how to use those functions correctly a challenge. Clean this up by making gfs2_is_ordered and gfs2_is_writeback take a super block instead of an inode and by removing the implicit !gfs2_is_jdata checks. Update the callers accordingly. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-10-21pagevec: Use xa_mark_tMatthew Wilcox1-1/+1
Removes sparse warnings. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-07-25gfs2: use iomap_readpage for blocksize == PAGE_SIZEAndreas Gruenbacher1-1/+5
We only use iomap_readpage for pages that don't have buffer heads attached yet: iomap_readpage would otherwise read pages from disk that are marked buffer_uptodate() but not PageUptodate(). Those pages may actually contain data more recent than what's on disk. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-02gfs2: Remove gfs2_write_{begin,end}Andreas Gruenbacher1-213/+0
Now that generic_file_write_iter is no longer used, there are no remaining users of these address space operations. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-02gfs2: iomap direct I/O supportAndreas Gruenbacher1-98/+2
The page unmapping previously done in gfs2_direct_IO is now done generically in iomap_dio_rw. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-02gfs2: iomap buffered write supportAndreas Gruenbacher1-9/+11
With the traditional page-based writes, blocks are allocated separately for each page written to. With iomap writes, we can allocate a lot more blocks at once, with a fraction of the allocation overhead for each page. Split calculating the number of blocks that can be allocated at a given position (gfs2_alloc_size) off from gfs2_iomap_alloc: that size determines the number of blocks to allocate and reserve in the journal. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-06-04gfs2: Remove ordered write mode handling from gfs2_trans_add_dataAndreas Gruenbacher1-3/+4
In journaled data mode, we need to add each buffer head to the current transaction. In ordered write mode, we only need to add the inode to the ordered inode list. So far, both cases are handled in gfs2_trans_add_data. This makes the code look misleading and is inefficient for small block sizes as well. Handle both cases separately instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-06-04gfs2: gfs2_stuffed_write_end cleanupAndreas Gruenbacher1-31/+18
First, change the sanity check in gfs2_stuffed_write_end to check for the actual write size instead of the requested write size. Second, use the existing teardown code in gfs2_write_end instead of duplicating it in gfs2_stuffed_write_end. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-06-04GFS2: Fix allocation error bug with recursive rgrp glockingAndreas Gruenbacher1-5/+8
Before this patch function gfs2_write_begin, upon discovering an error, called gfs2_trim_blocks while the rgrp glock was still held. That's because gfs2_inplace_release is not called until later. This patch reorganizes the logic a bit so gfs2_inplace_release is called to release the lock prior to the call to gfs2_trim_blocks, thus preventing the glock recursion. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-03-08GFS2: Only set PageChecked for jdata pagesBob Peterson1-4/+4
Before this patch, GFS2 was setting the PageChecked flag for ordered write pages. This is unnecessary. The ext3 file system only does it for jdata, and it's only used in jdata circumstances. It only muddies the already murky waters of writing pages in the aops. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-23GFS2: Log the reason for log flushes in every log headerBob Peterson1-1/+2
This patch just adds the capability for GFS2 to track which function called gfs2_log_flush. This should make it easier to diagnose problems based on the sequence of events found in the journals. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23GFS2: Introduce new gfs2_log_header_v2Bob Peterson1-1/+1
This patch adds a new structure called gfs2_log_header_v2 which is used to store expanded fields into previously unused areas of the log headers (i.e., this change is backwards compatible). Some of these are used for debug purposes so we can backtrack when problems occur. Others are reserved for future expansion. This patch is based on a prototype from Steve Whitehouse. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-18gfs2: Minor gfs2_page_add_databufs cleanupAndreas Gruenbacher1-6/+7
The to parameter of gfs2_page_add_databufs is passed inconsistently: once as from + len, once as from + len - 1. Just pass len instead. In addition, once we're past the end, we can immediately break out of the loop. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-18gfs2: Add gfs2_max_stuffed_sizeAndreas Gruenbacher1-4/+5
Add a small inline function for computing the maximum size of a stuffed inode instead of open coding that in several places throughout the code. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-18gfs2: Typo fixesAndreas Gruenbacher1-3/+2
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-11-27gfs2: Remove unused gfs2_write_jdata_pagevec parameterAndreas Gruenbacher1-3/+2
As a follow-up to commit d2bc5b3c67a9, remove the end parameter which is now unused. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-11-15mm, pagevec: remove cold parameter for pagevecsMel Gorman1-1/+1
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm: remove nr_pages argument from pagevec_lookup_{,range}_tag()Jan Kara1-1/+1
All users of pagevec_lookup() and pagevec_lookup_range() now pass PAGEVEC_SIZE as a desired number of pages. Just drop the argument. Link: http://lkml.kernel.org/r/20171009151359.31984-15-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15gfs2: use pagevec_lookup_range_tag()Jan Kara1-18/+2
We want only pages from given range in gfs2_write_cache_jdata(). Use pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove unnecessary code. Link: http://lkml.kernel.org/r/20171009151359.31984-9-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10gfs2: forcibly flush ail to relieve memory pressureAbhi Das1-1/+13
On systems with low memory, it is possible for gfs2 to infinitely loop in balance_dirty_pages() under heavy IO (creating sparse files). balance_dirty_pages() attempts to write out the dirty pages via gfs2_writepages() but none are found because these dirty pages are being used by the journaling code in the ail. Normally, the journal has an upper threshold which when hit triggers an automatic flush of the ail. But this threshold can be higher than the number of allowable dirty pages and result in the ail never being flushed. This patch forces an ail flush when gfs2_writepages() fails to write anything. This is a good indication that the ail might be holding some dirty pages. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-02-21Merge tag 'gfs2-4.11.fixes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Robert Peterson: "We've got eight GFS2 patches for this merge window: - Andy Price submitted a patch to make gfs2_write_full_page a static function. - Dan Carpenter submitted a patch to fix a ERR_PTR thinko. Three patches fix bugs related to deleting very large files, which cause GFS2 to run out of journal space: - The first one prevents GFS2 delete operation from requesting too much journal space. - The second one fixes a problem whereby GFS2 can hang because it wasn't taking journal space demand into its calculations. - The third one wakes up IO waiters when a flush is done to restart processes stuck waiting for journal space to become available. The final three patches are a performance improvement related to spin_lock contention between multiple writers: - The "tr_touched" variable was switched to a flag to be more atomic and eliminate the possibility of some races. - Function meta_lo_add was moved inline with its only caller to make the code more readable and efficient. - Contention on the gfs2_log_lock spinlock was greatly reduced by avoiding the lock altogether in cases where we don't really need it: buffers that already appear in the appropriate metadata list for the journal. Many thanks to Steve Whitehouse for the ideas and principles behind these patches" * tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Make gfs2_write_full_page static GFS2: Reduce contention on gfs2_log_lock GFS2: Inline function meta_lo_add GFS2: Switch tr_touched to flag in transaction GFS2: Wake up io waiters whenever a flush is done GFS2: Made logd daemon take into account log demand GFS2: Limit number of transaction blocks requested for truncates GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
2017-02-03gfs2: Make gfs2_write_full_page staticAndrew Price1-2/+2
It only gets called from aops.c and doesn't appear in any headers. Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-12-10fix gfs2_stuffed_write_end() on short copiesAl Viro1-3/+1
a) the page is uptodate - ->write_begin() would either fail (in which case we don't reach ->write_end()), or unstuff the inode, or find the page already uptodate, or do a successful call of stuffed_readpage(), which would've made it uptodate b) zeroing the tail in pagecache is wrong. kill -9 at the right time while writing unmodified file contents to the same file should _not_ leave us in a situation when read() from the file will be reporting it full of zeroes. Especially since that effect will be transient - at some later point the page will be evicted and then we'll be back to the real file contents. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-08-18gfs2: Remove dirty buffer warning from gfs2_releasepageAndreas Gruenbacher1-5/+12
Unlike what its documentation suggests, the releasepage address space operation can currently be called on dirty pages via shrink_active_list. This may eventually be changed when the remaining code relying on the current behavior has been fixed, but until then, it makes no sense to warn on dirty buffers in gfs2_releasepage. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-08-02GFS2: use BIT() macroFabian Frederick1-1/+1
Replace 1 << value shift by more explicit BIT() macro Also fixes two bare unsigned definitions: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned hsize = BIT(ip->i_depth); Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-27gfs2: writeout truncated pagesBenjamin Marzinski1-15/+34
When gfs2 attempts to write a page to a file that is being truncated, and notices that the page is completely outside of the file size, it tries to invalidate it. However, this may require a transaction for journaled data files to revoke any buffers from the page on the active items list. Unfortunately, this can happen inside a log flush, where a transaction cannot be started. Also, gfs2 may need to be able to remove the buffer from the ail1 list before it can finish the log flush. To deal with this, when writing a page of a file with data journalling enabled gfs2 now skips the check to see if the write is outside the file size, and simply writes it anyway. This situation can only occur when the truncate code still has the file locked exclusively, and hasn't marked this block as free in the metadata (which happens later in truc_dealloc). After gfs2 writes this page out, the truncation code will shortly invalidate it and write out any revokes if necessary. To do this, gfs2 now implements its own version of block_write_full_page without the check, and calls the newly exported __block_write_full_page. It also no longer calls gfs2_writepage_common from gfs2_jdata_writepage. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-05-20Merge tag 'gfs2-4.7.fixes' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We've got nine patches this time: - Abhi Das has two patches that fix a GFS2 splice issue (and an adjustment). - Ben Marzinski has a patch which allows the proper unmount of a GFS2 file system after hitting a withdraw error. - I have a patch to fix a problem where GFS2 would dereference an error value, plus three cosmetic / refactoring patches. - Daniel DeFreez has a patch to fix two glock reference count problems, where GFS2 was not properly "uninitializing" its glock holder on error paths. - Denys Vlasenko has a patch to change a function to not be inlined, thus reducing the memory footprint of the GFS2 module" * tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Refactor gfs2_remove_from_journal GFS2: Remove allocation parms from gfs2_rbm_find gfs2: use inode_lock/unlock instead of accessing i_mutex directly GFS2: Add calls to gfs2_holder_uninit in two error handlers GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read() GFS2: Get rid of dead code in inode_go_demote_ok GFS2: ignore unlock failures after withdraw
2016-05-06GFS2: Refactor gfs2_remove_from_journalBob Peterson1-1/+1
This patch makes two simple changes to function gfs2_remove_from_journal. First, it removes the parameter that specifies the transaction. Since it's always passed in as current->journal_info, we might as well set that in the function rather than passing it in. Second, it changes the meta parameter to use an enum to make the code more clear. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2016-05-01direct-io: eliminate the offset argument to ->direct_IOChristoph Hellwig1-3/+3
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually work, so eliminate the superflous argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-19GFS2: Add calls to gfs2_holder_uninit in two error handlersDaniel DeFreez1-1/+2
This patch fixes two locations that do not call gfs2_holder_uninit if gfs2_glock_nq returns an error. Signed-off-by: Daniel DeFreez <dcdefreez@ucdavis.edu> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-22/+22
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15GFS2: Fix direct IO write rounding errorBob Peterson1-1/+1
The fsx test in xfstests was failing because it was using direct IO writes which were using a bad calculation. It was using loff_t lstart = offset & (PAGE_CACHE_SIZE - 1); when it should be loff_t lstart = offset & ~(PAGE_CACHE_SIZE - 1); Thus, the write at offset 0x67e00 was calculating lstart to be 0xe00, the address of our corruption. Instead, it should have been 0x67000. This patch fixes the calculation. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-11-24GFS2: Extract quota data from reservations structure (revert 5407e24)Bob Peterson1-1/+1
This patch basically reverts the majority of patch 5407e24. That patch eliminated the gfs2_qadata structure in favor of just using the reservations structure. The problem with doing that is that it increases the size of the reservations structure. That is not an issue until it comes time to fold the reservations structure into the inode in memory so we know it's always there. By separating out the quota structure again, we aren't punishing the non-quota users by making all the inodes bigger, requiring more slab space. This patch creates a new slab area to allocate the quota stuff so it's managed a little more sanely. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-06-27Merge tag 'gfs2-merge-window' of ↵Linus Torvalds1-4/+8
git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "Here are the patches we've accumulated for GFS2 for the current upstream merge window. We have a good mixture this time. Here are some of the features: - Fix a problem with RO mounts writing to the journal. - Further improvements to quotas on GFS2. - Added support for rename2 and RENAME_EXCHANGE on GFS2. - Increase performance by making glock lru_list less of a bottleneck. - Increase performance by avoiding unnecessary buffer_head releases. - Increase performance by using average glock round trip time from all CPUs. - Fixes for some compiler warnings and minor white space issues. - Other misc bug fixes" * tag 'gfs2-merge-window' of git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Don't brelse rgrp buffer_heads every allocation GFS2: Don't add all glocks to the lru gfs2: Don't support fallocate on jdata files gfs2: s64 cast for negative quota value gfs2: limit quota log messages gfs2: fix quota updates on block boundaries gfs2: fix shadow warning in gfs2_rbm_find() gfs2: kerneldoc warning fixes gfs2: convert simple_str to kstr GFS2: make sure S_NOSEC flag isn't overwritten GFS2: add support for rename2 and RENAME_EXCHANGE gfs2: handle NULL rgd in set_rgrp_preferences GFS2: inode.c: indent with TABs, not spaces GFS2: mark the journal idle to fix ro mounts GFS2: Average in only non-zero round-trip times for congestion stats GFS2: Use average srttb value in congestion calculations
2015-05-05gfs2: kerneldoc warning fixesFabian Frederick1-4/+8
Fixes the following kernel-doc warnings: Warning(fs/gfs2/aops.c:180): No description found for parameter 'wbc' Warning(fs/gfs2/aops.c:236): No description found for parameter 'end' Warning(fs/gfs2/aops.c:236): No description found for parameter 'done_index' Warning(fs/gfs2/aops.c:236): Excess function parameter 'writepage' description in 'gfs2_write_jdata_pagevec' Warning(fs/gfs2/aops.c:346): Excess function parameter 'writepage' description in 'gfs2_write_cache_jdata' Warning(fs/gfs2/aops.c:346): Excess function parameter 'data' description in 'gfs2_write_cache_jdata' Warning(fs/gfs2/aops.c:605): No description found for parameter 'file' Warning(fs/gfs2/aops.c:605): No description found for parameter 'mapping' Warning(fs/gfs2/aops.c:605): No description found for parameter 'pages' Warning(fs/gfs2/aops.c:605): No description found for parameter 'nr_pages' Warning(fs/gfs2/aops.c:870): No description found for parameter 'copied' Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-04-16Merge branch 'for-linus' of ↵Linus Torvalds1-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull third hunk of vfs changes from Al Viro: "This contains the ->direct_IO() changes from Omar + saner generic_write_checks() + dealing with fcntl()/{read,write}() races (mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of repeatedly looking at ->f_flags, which can be changed by fcntl(2), check ->ki_flags - which cannot) + infrastructure bits for dhowells' d_inode annotations + Christophs switch of /dev/loop to vfs_iter_write()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits) block: loop: switch to VFS ITER_BVEC configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode VFS: Make pathwalk use d_is_reg() rather than S_ISREG() VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR() VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk NFS: Don't use d_inode as a variable name VFS: Impose ordering on accesses of d_inode and d_flags VFS: Add owner-filesystem positive/negative dentry checks nfs: generic_write_checks() shouldn't be done on swapout... ocfs2: use __generic_file_write_iter() mirror O_APPEND and O_DIRECT into iocb->ki_flags switch generic_write_checks() to iocb and iter ocfs2: move generic_write_checks() before the alignment checks ocfs2_file_write_iter: stop messing with ppos udf_file_write_iter: reorder and simplify fuse: ->direct_IO() doesn't need generic_write_checks() ext4_file_write_iter: move generic_write_checks() up xfs_file_aio_write_checks: switch to iocb/iov_iter generic_write_checks(): drop isblk argument blkdev_write_iter: expand generic_file_checks() call in there ...
2015-04-14Merge tag 'gfs2-merge-window' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "Here is a list of patches we've accumulated for GFS2 for the current upstream merge window. Most of the patches fix GFS2 quotas, which were not properly enforced. There's another that adds me as a GFS2 co-maintainer, and a couple patches that fix a kernel panic doing splice_write on GFS2 as well as a few correctness patches" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix quota refresh race in do_glock() gfs2: incorrect check for debugfs returns gfs2: allow fallocate to max out quotas/fs efficiently gfs2: allow quota_check and inplace_reserve to return available blocks gfs2: perform quota checks against allocation parameters GFS2: Move gfs2_file_splice_write outside of #ifdef GFS2: Allocate reservation during splice_write GFS2: gfs2_set_acl(): Cache "no acl" as well Add myself (Bob Peterson) as a maintainer of GFS2
2015-04-11direct_IO: remove rw from a_ops->direct_IO()Omar Sandoval1-2/+2
Now that no one is using rw, remove it completely. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11direct_IO: use iov_iter_rw() instead of rw everywhereOmar Sandoval1-4/+3
The rw parameter to direct_IO is redundant with iov_iter->type, and treated slightly differently just about everywhere it's used: some users do rw & WRITE, and others do rw == WRITE where they should be doing a bitwise check. Simplify this with the new iov_iter_rw() helper, which always returns either READ or WRITE. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11Remove rw from {,__,do_}blockdev_direct_IO()Omar Sandoval1-3/+2
Most filesystems call through to these at some point, so we'll start here. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 05:33:05 +0000