summaryrefslogtreecommitdiffstats
path: root/fs/fuse
AgeCommit message (Collapse)AuthorFilesLines
2022-04-01fs: Remove ->readpages address space operationMatthew Wilcox (Oracle)1-1/+1
All filesystems have now been converted to use ->readahead, so remove the ->readpages operation and fix all the comments that used to refer to it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk>
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-22Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds3-11/+10
Pull filesystem folio updates from Matthew Wilcox: "Primarily this series converts some of the address_space operations to take a folio instead of a page. Notably: - a_ops->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. - a_ops->invalidatepage() becomes ->invalidate_folio() and has a similar type change. - a_ops->launder_page() becomes ->launder_folio() - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request" * tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits) fs: Remove aops ->set_page_dirty fb_defio: Use noop_dirty_folio() fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio fs: Convert __set_page_dirty_buffers to block_dirty_folio nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio() mm: Convert swap_set_page_dirty() to swap_dirty_folio() ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio() btrfs: Convert extent_range_redirty_for_io() to use folios fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio btrfs: Convert from set_page_dirty to dirty_folio fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio() fs: Add aops->dirty_folio fs: Remove aops->launder_page orangefs: Convert launder_page to launder_folio nfs: Convert from launder_page to launder_folio fuse: Convert from launder_page to launder_folio ...
2022-03-22Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-0/+1
Pull folio updates from Matthew Wilcox: - Rewrite how munlock works to massively reduce the contention on i_mmap_rwsem (Hugh Dickins): https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/ - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig): https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/ - Convert GUP to use folios and make pincount available for order-1 pages. (Matthew Wilcox) - Convert a few more truncation functions to use folios (Matthew Wilcox) - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox) - Convert rmap_walk to use folios (Matthew Wilcox) - Convert most of shrink_page_list() to use a folio (Matthew Wilcox) - Add support for creating large folios in readahead (Matthew Wilcox) * tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits) mm/damon: minor cleanup for damon_pa_young selftests/vm/transhuge-stress: Support file-backed PMD folios mm/filemap: Support VM_HUGEPAGE for file mappings mm/readahead: Switch to page_cache_ra_order mm/readahead: Align file mappings for non-DAX mm/readahead: Add large folio readahead mm: Support arbitrary THP sizes mm: Make large folios depend on THP mm: Fix READ_ONLY_THP warning mm/filemap: Allow large folios to be added to the page cache mm: Turn can_split_huge_page() into can_split_folio() mm/vmscan: Convert pageout() to take a folio mm/vmscan: Turn page_check_references() into folio_check_references() mm/vmscan: Account large folios correctly mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios mm/vmscan: Free non-shmem folios without splitting them mm/rmap: Constify the rmap_walk_control argument mm/rmap: Convert rmap_walk() to take a folio mm: Turn page_anon_vma() into folio_anon_vma() mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read() ...
2022-03-22fs: allocate inode by using alloc_inode_sb()Muchun Song1-1/+1
The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4] Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22fuse: remove reliance on bdi congestionNeilBrown3-25/+17
The bdi congestion tracking in not widely used and will be removed. Fuse is one of a small number of filesystems that uses it, setting both the sync (read) and async (write) congestion flags at what it determines are appropriate times. The only remaining effect of the sync flag is to cause read-ahead to be skipped. The only remaining effect of the async flag is to cause (some) WB_SYNC_NONE writes to be skipped. So instead of setting the flags, change: - .readahead to stop when it has submitted all non-async pages for read. - .writepages to do nothing if WB_SYNC_NONE and the flag would be set - .writepage to return AOP_WRITEPAGE_ACTIVATE if WB_SYNC_NONE and the flag would be set. The writepages change causes a behavioural change in that pageout() can now return PAGE_ACTIVATE instead of PAGE_KEEP, so SetPageActive() will be called on the page which (I think) will further delay the next attempt at writeout. This might be a good thing. Link: https://lkml.kernel.org/r/164549983737.9187.2627117501000365074.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Paolo Valente <paolo.valente@linaro.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-16fs: Convert __set_page_dirty_no_writeback to noop_dirty_folioMatthew Wilcox (Oracle)1-1/+1
This is a mechanical change. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folioMatthew Wilcox (Oracle)1-1/+1
These filesystems use __set_page_dirty_nobuffers() either directly or with a very thin wrapper; convert them en masse. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15fuse: Convert from launder_page to launder_folioMatthew Wilcox (Oracle)2-8/+8
Straightforward conversion although the helper functions still assume a single page. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15fs: Remove noop_invalidatepage()Matthew Wilcox (Oracle)1-1/+0
We used to have to use noop_invalidatepage() to prevent block_invalidatepage() from being called, but that behaviour is now gone. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15x86: Remove toolchain check for X32 ABI capabilityMasahiro Yamada1-1/+1
Commit 0bf6276392e9 ("x32: Warn and disable rather than error if binutils too old") added a small test in arch/x86/Makefile because binutils 2.22 or newer is needed to properly support elf32-x86-64. This check is no longer necessary, as the minimum supported version of binutils is 2.23, which is enforced at configuration time with scripts/min-tool-version.sh. Remove this check and replace all uses of CONFIG_X86_X32 with CONFIG_X86_X32_ABI, as two symbols are no longer necessary. [nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still used, and simplify commit message to satisfy -tip requirements] Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org
2022-03-07fuse: fix pipe buffer lifetime for direct_ioMiklos Szeredi3-1/+13
In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then imports the write buffer with fuse_get_user_pages(), which uses iov_iter_get_pages() to grab references to userspace pages instead of actually copying memory. On the filesystem device side, these pages can then either be read to userspace (via fuse_dev_read()), or splice()d over into a pipe using fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops. This is wrong because after fuse_dev_do_read() unlocks the FUSE request, the userspace filesystem can mark the request as completed, causing write() to return. At that point, the userspace filesystem should no longer have access to the pipe buffer. Fix by copying pages coming from the user address space to new pipe buffers. Reported-by: Jann Horn <jannh@google.com> Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device") Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-03-03mm: don't include <linux/memremap.h> in <linux/mm.h>Christoph Hellwig1-0/+1
Move the check for the actual pgmap types that need the free at refcount one behavior into the out of line helper, and thus avoid the need to pull memremap.h into mm.h. Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-21fuse: move FUSE_SUPER_MAGIC definition to magic.hJeff Layton1-2/+1
...to help userland apps that need to identify FUSE mounts. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-02-18fuse: fix fileattr op failureMiklos Szeredi1-3/+6
The fileattr API conversion broke lsattr on ntfs3g. Previously the ioctl(... FS_IOC_GETFLAGS) returned an EINVAL error, but after the conversion the error returned by the fuse filesystem was not propagated back to the ioctl() system call, resulting in success being returned with bogus values. Fix by checking for outarg.result in fuse_priv_ioctl(), just as generic ioctl code does. Reported-by: Jean-Pierre André <jean-pierre.andre@wanadoo.fr> Fixes: 72227eac177d ("fuse: convert to fileattr") Cc: <stable@vger.kernel.org> # v5.13 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-2/+2
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin1-2/+2
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-12Merge tag 'libnvdimm-for-5.17' of ↵Linus Torvalds2-18/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax and libnvdimm updates from Dan Williams: "The bulk of this is a rework of the dax_operations API after discovering the obstacles it posed to the work-in-progress DAX+reflink support for XFS and other copy-on-write filesystem mechanics. Primarily the need to plumb a block_device through the API to handle partition offsets was a sticking point and Christoph untangled that dependency in addition to other cleanups to make landing the DAX+reflink support easier. The DAX_PMEM_COMPAT option has been around for 4 years and not only are distributions shipping userspace that understand the current configuration API, but some are not even bothering to turn this option on anymore, so it seems a good time to remove it per the deprecation schedule. Recall that this was added after the device-dax subsystem moved from /sys/class/dax to /sys/bus/dax for its sysfs organization. All recent functionality depends on /sys/bus/dax. Some other miscellaneous cleanups and reflink prep patches are included as well. Summary: - Simplify the dax_operations API: - Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining and applying a partition offset to all its DAX iomap operations. - Remove wrappers and device-mapper stacked callbacks for ->copy_from_iter() and ->copy_to_iter() in favor of moving block_device relative offset responsibility to the dax_direct_access() caller. - Remove the need for an @bdev in filesystem-DAX infrastructure - Remove unused uio helpers copy_from_iter_flushcache() and copy_mc_to_iter() as only the non-check_copy_size() versions are used for DAX. - Prepare XFS for the pending (next merge window) DAX+reflink support - Remove deprecated DEV_DAX_PMEM_COMPAT support - Cleanup a straggling misuse of the GUID api" * tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits) iomap: Fix error handling in iomap_zero_iter() ACPI: NFIT: Import GUID before use dax: remove the copy_from_iter and copy_to_iter methods dax: remove the DAXDEV_F_SYNC flag dax: simplify dax_synchronous and set_dax_synchronous uio: remove copy_from_iter_flushcache() and copy_mc_to_iter() iomap: turn the byte variable in iomap_zero_iter into a ssize_t memremap: remove support for external pgmap refcounts fsdax: don't require CONFIG_BLOCK iomap: build the block based code conditionally dax: fix up some of the block device related ifdefs fsdax: shift partition offset handling into the file systems dax: return the partition offset from fs_dax_get_by_bdev iomap: add a IOMAP_DAX flag xfs: pass the mapping flags to xfs_bmbt_to_iomap xfs: use xfs_direct_write_iomap_ops for DAX zeroing xfs: move dax device handling into xfs_{alloc,free}_buftarg ext4: cleanup the dax handling in ext4_fill_super ext2: cleanup the dax handling in ext2_fill_super fsdax: decouple zeroing from the iomap buffered I/O code ...
2021-12-18dax: remove the copy_from_iter and copy_to_iter methodsChristoph Hellwig1-16/+0
These methods indirect the actual DAX read/write path. In the end pmem uses magic flush and mc safe variants and fuse and dcssblk use plain ones while device mapper picks redirects to the underlying device. Add set_dax_nocache() and set_dax_nomc() APIs to control which copy routines are used to remove indirect call from the read/write fast path as well as a lot of boilerplate code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs] Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-18dax: remove the DAXDEV_F_SYNC flagChristoph Hellwig1-1/+1
Remove the DAXDEV_F_SYNC flag and thus the flags argument to alloc_dax and just let the drivers call set_dax_synchronous directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20211215084508.435401-4-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-14fuse: mark inode DONT_CACHE when per inode DAX hint changesJeffle Xu3-0/+13
When the per inode DAX hint changes while the file is still *opened*, it is quite complicated and maybe fragile to dynamically change the DAX state. Hence mark the inode and corresponding dentries as DONE_CACHE once the per inode DAX hint changes, so that the inode instance will be evicted and freed as soon as possible once the file is closed and the last reference to the inode is put. And then when the file gets reopened next time, the new instantiated inode will reflect the new DAX state. In summary, when the per inode DAX hint changes for an *opened* file, the DAX state of the file won't be updated until this file is closed and reopened later. Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-12-14fuse: negotiate per inode DAX in FUSE_INITJeffle Xu3-5/+13
Among the FUSE_INIT phase, client shall advertise per inode DAX if it's mounted with "dax=inode". Then server is aware that client is in per inode DAX mode, and will construct per-inode DAX attribute accordingly. Server shall also advertise support for per inode DAX. If server doesn't support it while client is mounted with "dax=inode", client will silently fallback to "dax=never" since "dax=inode" is advisory only. Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-12-14fuse: enable per inode DAXJeffle Xu4-9/+13
DAX may be limited in some specific situation. When the number of usable DAX windows is under watermark, the recalim routine will be triggered to reclaim some DAX windows. It may have a negative impact on the performance, since some processes may need to wait for DAX windows to be recalimed and reused then. To mitigate the performance degradation, the overall DAX window need to be expanded larger. However, simply expanding the DAX window may not be a good deal in some scenario. To maintain one DAX window chunk (i.e., 2MB in size), 32KB (512 * 64 bytes) memory footprint will be consumed for page descriptors inside guest, which is greater than the memory footprint if it uses guest page cache when DAX disabled. Thus it'd better disable DAX for those files smaller than 32KB, to reduce the demand for DAX window and thus avoid the unworthy memory overhead. Per inode DAX feature is introduced to address this issue, by offering a finer grained control for dax to users, trying to achieve a balance between performance and memory overhead. The FUSE_ATTR_DAX flag in FUSE_LOOKUP reply is used to indicate whether DAX should be enabled or not for corresponding file. Currently the state whether DAX is enabled or not for the file is initialized only when inode is instantiated. Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-12-14fuse: make DAX mount option a tri-stateJeffle Xu4-9/+52
We add 'always', 'never', and 'inode' (default). '-o dax' continues to operate the same which is equivalent to 'always'. The following behavior is consistent with that on ext4/xfs: - The default behavior (when neither '-o dax' nor '-o dax=always|never|inode' option is specified) is equal to 'inode' mode, while 'dax=inode' won't be printed among the mount option list. - The 'inode' mode is only advisory. It will silently fallback to 'never' mode if fuse server doesn't support that. Also noted that by the time of this commit, 'inode' mode is actually equal to 'always' mode, before the per inode DAX flag is introduced in the following patch. Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-12-14fuse: add fuse_should_enable_dax() helperJeffle Xu1-1/+9
This is in prep for following per inode DAX checking. Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-12-07fuse: Pass correct lend value to filemap_write_and_wait_range()Xie Yongji1-1/+1
The acceptable maximum value of lend parameter in filemap_write_and_wait_range() is LLONG_MAX rather than -1. And there is also some logic depending on LLONG_MAX check in write_cache_pages(). So let's pass LLONG_MAX to filemap_write_and_wait_range() in fuse_writeback_range() instead. Fixes: 59bda8ecee2f ("fuse: flush extending writes") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Cc: <stable@vger.kernel.org> # v5.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-12-04dax: simplify the dax_device <-> gendisk associationChristoph Hellwig1-1/+1
Replace the dax_host_hash with an xarray indexed by the pointer value of the gendisk, and require explicitly calls from the block drivers that want to associate their gendisk with a dax_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-04dax: remove CONFIG_DAX_DRIVERChristoph Hellwig1-1/+1
CONFIG_DAX_DRIVER only selects CONFIG_DAX now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20211129102203.2243509-4-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-11-25fuse: send security context of inode on fileVivek Goyal3-1/+98
When a new inode is created, send its security context to server along with creation request (FUSE_CREAT, FUSE_MKNOD, FUSE_MKDIR and FUSE_SYMLINK). This gives server an opportunity to create new file and set security context (possibly atomically). In all the configurations it might not be possible to set context atomically. Like nfs and ceph, use security_dentry_init_security() to dermine security context of inode and send it with create, mkdir, mknod, and symlink requests. Following is the information sent to server. fuse_sectx_header, fuse_secctx, xattr_name, security_context - struct fuse_secctx_header This contains total number of security contexts being sent and total size of all the security contexts (including size of fuse_secctx_header). - struct fuse_secctx This contains size of security context which follows this structure. There is one fuse_secctx instance per security context. - xattr name string This string represents name of xattr which should be used while setting security context. - security context This is the actual security context whose size is specified in fuse_secctx struct. Also add the FUSE_SECURITY_CTX flag for the `flags` field of the fuse_init_out struct. When this flag is set the kernel will append the security context for a newly created inode to the request (create, mkdir, mknod, and symlink). The server is responsible for ensuring that the inode appears atomically (preferrably) with the requested security context. For example, If the server is using SELinux and backed by a "real" linux file system that supports extended attributes it can write the security context value to /proc/thread-self/attr/fscreate before making the syscall to create the inode. This patch is based on patch from Chirantan Ekbote <chirantan@chromium.org> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-11-25fuse: release pipe buf after last useMiklos Szeredi1-5/+5
Checking buf->flags should be done before the pipe_buf_release() is called on the pipe buffer, since releasing the buffer might modify the flags. This is exactly what page_cache_pipe_buf_release() does, and which results in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was trying to fix. Reported-by: Justin Forbes <jmforbes@linuxtx.org> Fixes: 712a951025c0 ("fuse: fix page stealing") Cc: <stable@vger.kernel.org> # v2.6.35 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-11-25fuse: extend init flagsMiklos Szeredi1-27/+33
FUSE_INIT flags are close to running out, so add another 32bits worth of space. Add FUSE_INIT_EXT flag to the old flags field in fuse_init_in. If this flag is set, then fuse_init_in is extended by 48bytes, in which a flags_hi field is allocated to contain the high 32bits of the flags. A flags_hi field is also added to fuse_init_out, allocated out of the remaining unused fields. Known userspace implementations of the fuse protocol have been checked to accept the extended FUSE_INIT request, but this might cause problems with other implementations. If that happens to be the case, the protocol negotiation will have to be extended with an extra initialization request roundtrip. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-11-09Merge tag 'fuse-update-5.16' of ↵Linus Torvalds10-150/+197
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Fix a possible of deadlock in case inode writeback is in progress during dentry reclaim - Fix a crash in case of page stealing - Selectively invalidate cached attributes, possibly improving performance - Allow filesystems to disable data flushing from ->flush() - Misc fixes and cleanups * tag 'fuse-update-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (23 commits) fuse: fix page stealing virtiofs: use strscpy for copying the queue name fuse: add FOPEN_NOFLUSH fuse: only update necessary attributes fuse: take cache_mask into account in getattr fuse: add cache_mask fuse: move reverting attributes to fuse_change_attributes() fuse: simplify local variables holding writeback cache state fuse: cleanup code conditional on fc->writeback_cache fuse: fix attr version comparison in fuse_read_update_size() fuse: always invalidate attributes after writes fuse: rename fuse_write_update_size() fuse: don't bump attr_version in cached write fuse: selective attribute invalidation fuse: don't increment nlink in link() fuse: decrement nlink on overwriting rename fuse: simplify __fuse_write_file_get() fuse: move fuse_invalidate_attr() into fuse_update_ctime() fuse: delete redundant code fuse: use kmap_local_page() ...
2021-11-02Merge tag 'gfs2-v5.15-rc5-mmap-fault' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher: "Functions gfs2_file_read_iter and gfs2_file_write_iter are both accessing the user buffer to write to or read from while holding the inode glock. In the most basic deadlock scenario, that buffer will not be resident and it will be mapped to the same file. Accessing the buffer will trigger a page fault, and gfs2 will deadlock trying to take the same inode glock again while trying to handle that fault. Fix that and similar, more complex scenarios by disabling page faults while accessing user buffers. To make this work, introduce a small amount of new infrastructure and fix some bugs that didn't trigger so far, with page faults enabled" * tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix mmap + page fault deadlocks for direct I/O iov_iter: Introduce nofault flag to disable page faults gup: Introduce FOLL_NOFAULT flag to disable page faults iomap: Add done_before argument to iomap_dio_rw iomap: Support partial direct I/O on user copy failures iomap: Fix iomap_dio_rw return value for user copies gfs2: Fix mmap + page fault deadlocks for buffered I/O gfs2: Eliminate ip->i_gh gfs2: Move the inode glock locking to gfs2_file_buffered_write gfs2: Introduce flag for glock holder auto-demotion gfs2: Clean up function may_grant gfs2: Add wrapper for iomap_file_buffered_write iov_iter: Introduce fault_in_iov_iter_writeable iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable} powerpc/kvm: Fix kvm_use_magic_page iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
2021-11-02fuse: fix page stealingMiklos Szeredi1-2/+12
It is possible to trigger a crash by splicing anon pipe bufs to the fuse device. The reason for this is that anon_pipe_buf_release() will reuse buf->page if the refcount is 1, but that page might have already been stolen and its flags modified (e.g. PG_lru added). This happens in the unlikely case of fuse_dev_splice_write() getting around to calling pipe_buf_release() after a page has been stolen, added to the page cache and removed from the page cache. Fix by calling pipe_buf_release() right after the page was inserted into the page cache. In this case the page has an elevated refcount so any release function will know that the page isn't reusable. Reported-by: Frank Dinoff <fdinoff@google.com> Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/ Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device") Cc: <stable@vger.kernel.org> # v2.6.35 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-11-02virtiofs: use strscpy for copying the queue nameMiklos Szeredi1-1/+1
Always null terminate fsvq->name. Reported-by: kernel test robot <lkp@intel.com> Fixes: b43b7e81eb2b ("virtiofs: provide a helper function for virtqueue initialization") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-11-01Merge tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull kiocb->ki_complete() cleanup from Jens Axboe: "This removes the res2 argument from kiocb->ki_complete(). Only the USB gadget code used it, everybody else passes 0. The USB guys checked the user gadget code they could find, and everybody just uses res as expected for the async interface" * tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block: fs: get rid of the res2 iocb->ki_complete argument usb: remove res2 argument from gadget code completions
2021-10-28fuse: add FOPEN_NOFLUSHAmir Goldstein1-0/+3
Add flag returned by FUSE_OPEN and FUSE_CREATE requests to avoid flushing data cache on close. Different filesystems implement ->flush() is different ways: - Most disk filesystems do not implement ->flush() at all - Some network filesystem (e.g. nfs) flush local write cache of FMODE_WRITE file and send a "flush" command to server - Some network filesystem (e.g. cifs) flush local write cache of FMODE_WRITE file without sending an additional command to server FUSE flushes local write cache of ANY file, even non FMODE_WRITE and sends a "flush" command to server (if server implements it). The FUSE implementation of ->flush() seems over agressive and arbitrary and does not make a lot of sense when writeback caching is disabled. Instead of deciding on another arbitrary implementation that makes sense, leave the choice of per-file flush behavior in the hands of the server. Link: https://lore.kernel.org/linux-fsdevel/CAJfpegspE8e6aKd47uZtSYX8Y-1e1FWS0VL0DH2Skb9gQP5RJQ@mail.gmail.com/ Suggested-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: only update necessary attributesMiklos Szeredi4-10/+9
fuse_update_attributes() refreshes metadata for internal use. Each use needs a particular set of attributes to be refreshed, but currently that cannot be expressed and all but atime are refreshed. Add a mask argument, which lets fuse_update_get_attr() to decide based on the cache_mask and the inval_mask whether a GETATTR call is needed or not. Reported-by: Yongji Xie <xieyongji@bytedance.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: take cache_mask into account in getattrMiklos Szeredi1-1/+3
When deciding to send a GETATTR request take into account the cache mask (which attributes are always valid). The cache mask takes precedence over the invalid mask. This results in the GETATTR request not being sent unnecessarily. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: add cache_maskMiklos Szeredi3-9/+29
If writeback_cache is enabled, then the size, mtime and ctime attributes of regular files are always valid in the kernel's cache. They are retrieved from userspace only when the inode is freshly looked up. Add a more generic "cache_mask", that indicates which attributes are currently valid in cache. This patch doesn't change behavior. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: move reverting attributes to fuse_change_attributes()Miklos Szeredi2-9/+13
In case of writeback_cache fuse_fillattr() would revert the queried attributes to the cached version. Move this to fuse_change_attributes() in order to manage the writeback logic in a central helper. This will be necessary for patches that follow. Only fuse_do_getattr() -> fuse_fillattr() uses the attributes after calling fuse_change_attributes(), so this should not change behavior. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: simplify local variables holding writeback cache stateMiklos Szeredi2-6/+6
There are two instances of "bool is_wb = fc->writeback_cache" where the actual use mostly involves checking "is_wb && S_ISREG(inode->i_mode)". Clean up these cases by storing the second condition in the local variable. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: cleanup code conditional on fc->writeback_cacheMiklos Szeredi1-13/+4
It's safe to call file_update_time() if writeback cache is not enabled, since S_NOCMTIME is set in this case. This part is purely a cleanup. __fuse_copy_file_range() also calls fuse_write_update_attr() only in the writeback cache case. This is inconsistent with other callers, where it's called unconditionally. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: fix attr version comparison in fuse_read_update_size()Miklos Szeredi1-1/+1
A READ request returning a short count is taken as indication of EOF, and the cached file size is modified accordingly. Fix the attribute version checking to allow for changes to fc->attr_version on other inodes. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: always invalidate attributes after writesMiklos Szeredi4-20/+15
Extend the fuse_write_update_attr() helper to invalidate cached attributes after a write. This has already been done in all cases except in fuse_notify_store(), so this is mostly a cleanup. fuse_direct_write_iter() calls fuse_direct_IO() which already calls fuse_write_update_attr(), so don't repeat that again in the former. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: rename fuse_write_update_size()Miklos Szeredi4-9/+9
This function already updates the attr_version in fuse_inode, regardless of whether the size was changed or not. Rename the helper to fuse_write_update_attr() to reflect the more generic nature. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: don't bump attr_version in cached writeMiklos Szeredi1-2/+5
The attribute version in fuse_inode should be updated whenever the attributes might have changed on the server. In case of cached writes this is not the case, so updating the attr_version is unnecessary and could possibly affect performance. Open code the remaining part of fuse_write_update_size(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: selective attribute invalidationMiklos Szeredi4-11/+19
Only invalidate attributes that the operation might have changed. Introduce two constants for common combinations of changed attributes: FUSE_STATX_MODIFY: file contents are modified but not size FUSE_STATX_MODSIZE: size and/or file contents modified Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-28fuse: don't increment nlink in link()Miklos Szeredi1-19/+11
The fuse_iget() call in create_new_entry() already updated the inode with all the new attributes and incremented the attribute version. Incrementing the nlink will result in the wrong count. This wasn't noticed because the attributes were invalidated right after this. Updating ctime is still needed for the writeback case when the ctime is not refreshed. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-25fs: get rid of the res2 iocb->ki_complete argumentJens Axboe1-1/+1
The second argument was only used by the USB gadget code, yet everyone pays the overhead of passing a zero to be passed into aio, where it ends up being part of the aio res2 value. Now that everybody is passing in zero, kill off the extra argument. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>