summaryrefslogtreecommitdiffstats
path: root/fs/fuse
AgeCommit message (Collapse)AuthorFilesLines
2014-06-04mm: non-atomically mark page accessed during page cache allocation where ↵Mel Gorman1-2/+0
possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: page_alloc: convert hot/cold parameter and immediate callers to boolMel Gorman1-1/+1
cold is a bool, make it one. Make the likely case the "if" part of the block instead of the else as according to the optimisation manual this is preferred. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-02locks: ensure that fl_owner is always initialized properly in flock and ↵Jeff Layton1-1/+0
lease codepaths Currently, the fl_owner isn't set for flock locks. Some filesystems use byte-range locks to simulate flock locks and there is a common idiom in those that does: fl->fl_owner = (fl_owner_t)filp; fl->fl_start = 0; fl->fl_end = OFFSET_MAX; Since flock locks are generally "owned" by the open file description, move this into the common flock lock setup code. The fl_start and fl_end fields are already set appropriately, so remove the unneeded setting of that in flock ops in those filesystems as well. Finally, the lease code also sets the fl_owner as if they were owned by the process and not the open file description. This is incorrect as leases have the same ownership semantics as flock locks. Set them the same way. The lease code doesn't actually use the fl_owner value for anything, so this is more for consistency's sake than a bugfix. Reported-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jeff Layton <jlayton@poochiereds.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (Staging portion) Acked-by: J. Bruce Fields <bfields@fieldses.org>
2014-04-28fuse: add renameat2 supportMiklos Szeredi2-8/+50
Support RENAME_EXCHANGE and RENAME_NOREPLACE flags on the userspace ABI. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: clear MS_I_VERSIONMiklos Szeredi1-1/+1
Fuse doesn't support i_version (yet). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: clear FUSE_I_CTIME_DIRTY flag on setattrMaxim Patlasov1-9/+17
The patch addresses two use-cases when the flag may be safely cleared: 1. fuse_do_setattr() is called with ATTR_CTIME flag set in attr->ia_valid. In this case attr->ia_ctime bears actual value. In-kernel fuse must send it to the userspace server and then assign the value to inode->i_ctime. 2. fuse_do_setattr() is called with ATTR_SIZE flag set in attr->ia_valid, whereas ATTR_CTIME is not set (truncate(2)). In this case in-kernel fuse must sent "now" to the userspace server and then assign the value to inode->i_ctime. In both cases we could clear I_DIRTY_SYNC, but that needs more thought. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: trust kernel i_ctime onlyMaxim Patlasov2-4/+24
Let the kernel maintain i_ctime locally: update i_ctime explicitly on truncate, fallocate, open(O_TRUNC), setxattr, removexattr, link, rename, unlink. The inode flag I_DIRTY_SYNC serves as indication that local i_ctime should be flushed to the server eventually. The patch sets the flag and updates i_ctime in course of operations listed above. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: remove .update_timeMiklos Szeredi1-12/+0
This implements updating ctime as well as mtime on file_update_time(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: allow ctime flushing to userspaceMaxim Patlasov3-4/+9
The patch extends fuse_setattr_in, and extends the flush procedure (fuse_flush_times()) called on ->write_inode() to send the ctime as well as mtime. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: fuse: add time_gran to INIT_OUTMiklos Szeredi1-0/+5
Allow userspace fs to specify time granularity. This is needed because with writeback_cache mode the kernel is responsible for generating mtime and ctime, but if the underlying filesystem doesn't support nanosecond granularity then the cache will contain a different value from the one stored on the filesystem resulting in a change of times after a cache flush. Make the default granularity 1s. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: add .write_inodeMiklos Szeredi4-33/+45
...and flush mtime from this. This allows us to use the kernel infrastructure for writing out dirty metadata (mtime at this point, but ctime in the next patches and also maybe atime). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: clean up fsyncMiklos Szeredi1-8/+3
Don't need to start I/O twice (once without i_mutex and one within). Also make sure that even if the userspace filesystem doesn't support FSYNC we do all the steps other than sending the message. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: fuse: fallocate: use file_update_time()Miklos Szeredi1-6/+2
in preparation for getting rid of FUSE_I_MTIME_DIRTY. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: update mtime on open(O_TRUNC) in atomic_o_trunc modeMaxim Patlasov1-4/+14
In case of fc->atomic_o_trunc is set, fuse does nothing in fuse_do_setattr() while handling open(O_TRUNC). Hence, i_mtime must be updated explicitly in fuse_finish_open(). The patch also adds extra locking encompassing open(O_TRUNC) operation to avoid races between the truncation and updating i_mtime. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: update mtime on truncate(2)Maxim Patlasov1-0/+2
Handling truncate(2), VFS doesn't set ATTR_MTIME bit in iattr structure; only ATTR_SIZE bit is set. In-kernel fuse must handle the case by setting mtime fields of struct fuse_setattr_in to "now" and set FATTR_MTIME bit even though ATTR_MTIME was not set. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: do not use uninitialized i_modeMaxim Patlasov1-1/+1
When inode is in I_NEW state, inode->i_mode is not initialized yet. Do not use it before fuse_init_inode() is called. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: fix mtime update error in fsyncMiklos Szeredi1-1/+1
Bad case of shadowing. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: check fallocate modeMiklos Szeredi1-0/+3
Don't allow new fallocate modes until we figure out what (if anything) that takes. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-28fuse: add __exit to fuse_ctl_cleanupFabian Frederick2-2/+2
fuse_ctl_cleanup is only called by __exit fuse_exit Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds2-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-07mm: implement ->map_pages for page cacheKirill A. Shutemov1-0/+1
filemap_map_pages() is generic implementation of ->map_pages() for filesystems who uses page cache. It should be safe to use filemap_map_pages() for ->map_pages() if filesystem use filemap_fault() for ->fault(). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-06Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
2014-04-04Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Major changes for 3.14 include support for the newly added ZERO_RANGE and COLLAPSE_RANGE fallocate operations, and scalability improvements in the jbd2 layer and in xattr handling when the extended attributes spill over into an external block. Other than that, the usual clean ups and minor bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits) ext4: fix premature freeing of partial clusters split across leaf blocks ext4: remove unneeded test of ret variable ext4: fix comment typo ext4: make ext4_block_zero_page_range static ext4: atomically set inode->i_flags in ext4_set_inode_flags() ext4: optimize Hurd tests when reading/writing inodes ext4: kill i_version support for Hurd-castrated file systems ext4: each filesystem creates and uses its own mb_cache fs/mbcache.c: doucple the locking of local from global data fs/mbcache.c: change block and index hash chain to hlist_bl_node ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate ext4: refactor ext4_fallocate code ext4: Update inode i_size after the preallocation ext4: fix partial cluster handling for bigalloc file systems ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents ext4: only call sync_filesystm() when remounting read-only fs: push sync_filesystem() down to the file system's remount_fs() jbd2: improve error messages for inconsistent journal heads jbd2: minimize region locked by j_list_lock in jbd2_journal_forget() jbd2: minimize region locked by j_list_lock in journal_get_create_access() ...
2014-04-04Merge branch 'for-linus' of ↵Linus Torvalds5-83/+378
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse update from Miklos Szeredi: "This series adds cached writeback support to fuse, improving write throughput" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix "uninitialized variable" warning fuse: Turn writeback cache on fuse: Fix O_DIRECT operations vs cached writeback misorder fuse: fuse_flush() should wait on writeback fuse: Implement write_begin/write_end callbacks fuse: restructure fuse_readpage() fuse: Flush files on wb close fuse: Trust kernel i_mtime only fuse: Trust kernel i_size only fuse: Connection bit for enabling writeback fuse: Prepare to handle short reads fuse: Linking file to inode helper
2014-04-03mm + fs: store shadow entries in page cacheJohannes Weiner1-1/+1
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-02fuse: fix "uninitialized variable" warningRajat Jain1-1/+1
Fix the following warning: In file included from include/linux/fs.h:16:0, from fs/fuse/fuse_i.h:13, from fs/fuse/file.c:9: fs/fuse/file.c: In function 'fuse_file_poll': include/linux/rbtree.h:82:28: warning: 'parent' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/file.c:2592:27: note: 'parent' was declared here Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Turn writeback cache onPavel Emelyanov2-1/+15
Introduce a bit kernel and userspace exchange between each-other on the init stage and turn writeback on if the userspace want this and mount option 'allow_wbcache' is present (controlled by fusermount). Also add each writable file into per-inode write list and call the generic_file_aio_write to make use of the Linux page cache engine. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Fix O_DIRECT operations vs cached writeback misorderPavel Emelyanov3-9/+41
The problem is: 1. write cached data to a file 2. read directly from the same file (via another fd) The 2nd operation may read stale data, i.e. the one that was in a file before the 1st op. Problem is in how fuse manages writeback. When direct op occurs the core kernel code calls filemap_write_and_wait to flush all the cached ops in flight. But fuse acks the writeback right after the ->writepages callback exits w/o waiting for the real write to happen. Thus the subsequent direct op proceeds while the real writeback is still in flight. This is a problem for backends that reorder operation. Fix this by making the fuse direct IO callback explicitly wait on the in-flight writeback to finish. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: fuse_flush() should wait on writebackMaxim Patlasov1-15/+23
The aim of .flush fop is to hint file-system that flushing its state or caches or any other important data to reliable storage would be desirable now. fuse_flush() passes this hint by sending FUSE_FLUSH request to userspace. However, dirty pages and pages under writeback may be not visible to userspace yet if we won't ensure it explicitly. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Implement write_begin/write_end callbacksPavel Emelyanov1-0/+73
The .write_begin and .write_end are requiered to use generic routines (generic_file_aio_write --> ... --> generic_perform_write) for buffered writes. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: restructure fuse_readpage()Maxim Patlasov1-7/+16
Move the code filling and sending read request to a separate function. Future patches will use it for .write_begin -- partial modification of a page requires reading the page from the storage very similarly to what fuse_readpage does. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Flush files on wb closePavel Emelyanov1-0/+6
Any write request requires a file handle to report to the userspace. Thus when we close a file (and free the fuse_file with this info) we have to flush all the outstanding dirty pages. filemap_write_and_wait() is enough because every page under fuse writeback is accounted in ff->count. This delays actual close until all fuse wb is completed. In case of "write cache" turned off, the flush is ensured by fuse_vma_close(). Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Trust kernel i_mtime onlyMaxim Patlasov4-25/+132
Let the kernel maintain i_mtime locally: - clear S_NOCMTIME - implement i_op->update_time() - flush mtime on fsync and last close - update i_mtime explicitly on truncate and fallocate Fuse inode flag FUSE_I_MTIME_DIRTY serves as indication that local i_mtime should be flushed to the server eventually. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Trust kernel i_size onlyPavel Emelyanov3-6/+39
Make fuse think that when writeback is on the inode's i_size is always up-to-date and not update it with the value received from the userspace. This is done because the page cache code may update i_size without letting the FS know. This assumption implies fixing the previously introduced short-read helper -- when a short read occurs the 'hole' is filled with zeroes. fuse_file_fallocate() is also fixed because now we should keep i_size up to date, so it must be updated if FUSE_FALLOCATE request succeeded. Signed-off-by: Maxim V. Patlasov <MPatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Connection bit for enabling writebackPavel Emelyanov1-0/+3
Off (0) by default. Will be used in the next patches and will be turned on at the very end. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Prepare to handle short readsPavel Emelyanov1-8/+13
A helper which gets called when read reports less bytes than was requested. See patch "trust kernel i_size only" for details. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-02fuse: Linking file to inode helperPavel Emelyanov1-14/+19
When writeback is ON every writeable file should be in per-inode write list, not only mmap-ed ones. Thus introduce a helper for this linkage. Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-04-01generic_file_direct_write(): get rid of ppos argumentAl Viro1-2/+1
always equal to &iocb->ki_pos. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01callers of iov_copy_from_user_atomic() don't need pagecache_disable()Al Viro1-2/+0
... it does that itself (via kmap_atomic()) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01pipe: kill ->map() and ->unmap()Al Viro1-3/+3
all pipe_buffer_operations have the same instances of those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01fuse/dev: use atomic mapsAl Viro1-5/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-24VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.Rusty Russell1-2/+2
Summary of http://lkml.org/lkml/2014/3/14/363 : Ted: module_param(queue_depth, int, 444) Joe: 0444! Rusty: User perms >= group perms >= other perms? Joe: CLASS_ATTR, DEVICE_ATTR, SENSOR_ATTR and SENSOR_ATTR_2? Side effect of stricter permissions means removing the unnecessary S_IFREG from several callers. Note that the BUILD_BUG_ON_ZERO((perm) & 2) test was removed: a fair number of drivers fail this test, so that will be the debate for a future patch. Suggested-by: Joe Perches <joe@perches.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> for drivers/pci/slot.c Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-13fs: push sync_filesystem() down to the file system's remount_fs()Theodore Ts'o1-0/+1
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-01-28Merge branch 'for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted stuff; the biggest pile here is Christoph's ACL series. Plus assorted cleanups and fixes all over the place... There will be another pile later this week" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits) __dentry_path() fixes vfs: Remove second variable named error in __dentry_path vfs: Is mounted should be testing mnt_ns for NULL or error. Fix race when checking i_size on direct i/o read hfsplus: remove can_set_xattr nfsd: use get_acl and ->set_acl fs: remove generic_acl nfs: use generic posix ACL infrastructure for v3 Posix ACLs gfs2: use generic posix ACL infrastructure jfs: use generic posix ACL infrastructure xfs: use generic posix ACL infrastructure reiserfs: use generic posix ACL infrastructure ocfs2: use generic posix ACL infrastructure jffs2: use generic posix ACL infrastructure hfsplus: use generic posix ACL infrastructure f2fs: use generic posix ACL infrastructure ext2/3/4: use generic posix ACL infrastructure btrfs: use generic posix ACL infrastructure fs: make posix_acl_create more useful fs: make posix_acl_chmod more useful ...
2014-01-26Fix race when checking i_size on direct i/o readSteven Whitehouse1-0/+3
So far I've had one ACK for this, and no other comments. So I think it is probably time to send this via some suitable tree. I'm guessing that the vfs tree would be the most appropriate route, but not sure that there is one at the moment (don't see anything recent at kernel.org) so in that case I think -mm is the "back up plan". Al, please let me know if you will take this? Steve. --------------------- Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio reads with append dio writes" thread on linux-fsdevel, this patch is my current version of the fix proposed as option (b) in that thread. Removing the i_size test from the direct i/o read path at vfs level means that filesystems now have to deal with requests which are beyond i_size themselves. These I've divided into three sets: a) Those with "no op" ->direct_IO (9p, cifs, ceph) These are obviously not going to be an issue b) Those with "home brew" ->direct_IO (nfs, fuse) I've been told that NFS should not have any problem with the larger i_size, however I've added an extra test to FUSE to duplicate the original behaviour just to be on the safe side. c) Those using __blockdev_direct_IO() These call through to ->get_block() which should deal with the EOF condition correctly. I've verified that with GFS2 and I believe that Zheng has verified it for ext4. I've also run the test on XFS and it passes both before and after this change. The part of the patch in filemap.c looks a lot larger than it really is - there are only two lines of real change. The rest is just indentation of the contained code. There remains a test of i_size though, which was added for btrfs. It doesn't cause the other filesystems a problem as the test is performed after ->direct_IO has been called. It is possible that there is a race that does matter to btrfs, however this patch doesn't change that, so its still an overall improvement. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-22fuse: support clients that don't implement 'open'Andrew Gallagher2-10/+30
open/release operations require userspace transitions to keep track of the open count and to perform any FS-specific setup. However, for some purely read-only FSs which don't need to perform any setup at open/release time, we can avoid the performance overhead of calling into userspace for open/release calls. This patch adds the necessary support to the fuse kernel modules to prevent open/release operations from hitting in userspace. When the client returns ENOSYS, we avoid sending the subsequent release to userspace, and also remember this so that future opens also don't trigger a userspace operation. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-01-22fuse: don't invalidate attrs when not using atimeAndrew Gallagher3-4/+16
Various read operations (e.g. readlink, readdir) invalidate the cached attrs for atime changes. This patch adds a new function 'fuse_invalidate_atime', which checks for a read-only super block and avoids the attr invalidation in that case. Signed-off-by: Andrew Gallagher <andrewjcg@fb.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-01-22fuse: fix SetPageUptodate() condition in STOREMiklos Szeredi1-1/+2
As noticed by Coverity the "num != 0" condition never triggers. Instead it should check for a complete page. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-01-22fuse: fix pipe_buf_operationsMiklos Szeredi1-17/+5
Having this struct in module memory could Oops when if the module is unloaded while the buffer still persists in a pipe. Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal merge them into nosteal_pipe_buf_ops (this is the same as default_pipe_buf_ops except stealing the page from the buffer is not allowed). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds4-42/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...