| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If writeback cache is enabled, then writes might get reordered with
chmod/chown/utimes. The problem with this is that performing the write in
the fuse daemon might itself change some of these attributes. In such case
the following sequence of operations will result in file ending up with the
wrong mode, for example:
int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL);
write (fd, "1", 1);
fchown (fd, 0, 0);
fchmod (fd, 04755);
close (fd);
This patch fixes this by flushing pending writes before performing
chown/chmod/utimes.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 4d99ff8f12eb ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If the FUSE_READDIRPLUS_AUTO feature is enabled, then lookups on a
directory before/during readdir are used as an indication that READDIRPLUS
should be used instead of READDIR. However if the lookup turns out to be
negative, then selecting READDIRPLUS makes no sense.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
account per-file, dentry, and inode data
blockdev/superblock and temporary per-request data was left alone, as
this usually isn't accounted
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Implements the optimization noted in commit f75fdf22b0a8 ("fuse: don't
use ->d_time"), as the additional memory can be significant. (In
particular, on SLAB configurations this 8-byte alloc becomes 32 bytes).
Per-dentry, this can consume significant memory.
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Don't hold onto dentry in lru list if need to re-lookup it anyway at next
access. Only do this if explicitly enabled, otherwise it could result in
performance regression.
More advanced version of this patch would periodically flush out dentries
from the lru which have gone stale.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Also turn BUG_ON into gracefully recovered WARN_ON.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
...to make future expansion simpler. The hiearachical structure is a
historical thing that does not serve any practical purpose.
The generated code is excatly the same before and after the patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This continues previous patch and introduces the same protection for
nlookup field.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
To minimize contention of fc->lock, this patch introduces a new spinlock
for protection fuse_inode metadata:
fuse_inode:
writectr
writepages
write_files
queued_writes
attr_version
inode:
i_size
i_nlink
i_mtime
i_ctime
Also, it protects the fields changed in fuse_change_attributes_common()
(too many to list).
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This patch makes fc->attr_version of atomic64_t type, so fc->lock won't be
needed to read or modify it anymore.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Here is preparation for next patches, which introduce new fi->lock for
protection of ff->write_entry linked into fi->write_files.
This patch just passes new argument to the function.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When FUSE_OPEN returns ENOSYS, the no_open bit is set on the connection.
Because the FUSE_RELEASE and FUSE_RELEASEDIR paths share code, this
incorrectly caused the FUSE_RELEASEDIR request to be dropped and never sent
to userspace.
Pass an isdir bool to distinguish between FUSE_RELEASE and FUSE_RELEASEDIR
inside of fuse_file_put.
Fixes: 7678ac50615d ("fuse: support clients that don't implement 'open'")
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: Chad Austin <chadaustin@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_invalidate_attr() now sets fi->inval_mask instead of fi->i_time, hence
we need to check the inval mask in fuse_permission() as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 2f1e81965fd0 ("fuse: allow fine grained attr cache invaldation")
|
|
Commit ab2257e9941b ("fuse: reduce size of struct fuse_inode") moved parts
of fields related to writeback on regular file and to directory caching
into a union. However fuse_fsync_common() called from fuse_dir_fsync()
touches some writeback related fields, resulting in a crash.
Move writeback related parts from fuse_fsync_common() to fuse_fysnc().
Reported-by: Brett Girton <btgirton@gmail.com>
Tested-by: Brett Girton <btgirton@gmail.com>
Fixes: ab2257e9941b ("fuse: reduce size of struct fuse_inode")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
FUSE file reads are cached in the page cache, but symlink reads are
not. This patch enables FUSE READLINK operations to be cached which
can improve performance of some FUSE workloads.
In particular, I'm working on a FUSE filesystem for access to source
code and discovered that about a 10% improvement to build times is
achieved with this patch (there are a lot of symlinks in the source
tree).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If 'auto_inval_data' mode is active, then fuse_file_read_iter() will call
fuse_update_attributes(), which will check the attribute validity and send
a GETATTR request if some of the attributes are no longer valid. The page
cache is then invalidated if the size or mtime have changed.
Then, if a READ request was sent and reply received (which is the case if
the data wasn't cached yet, or if the file is opened for O_DIRECT), the
atime attribute is invalidated.
This will result in the next read() also triggering a GETATTR, ...
This can be fixed by only sending GETATTR if the mode or size are invalid,
we don't need to do a refresh if only atime is invalid.
More generally, none of the callers of fuse_update_attributes() need an
up-to-date atime value, so for now just remove STATX_ATIME from the request
mask when attributes are updated for internal use.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This patch adds the infrastructure for more fine grained attribute
invalidation. Currently only 'atime' is invalidated separately.
The use of this infrastructure is extended to the statx(2) interface, which
for now means that if only 'atime' is invalid and STATX_ATIME is not
specified in the mask argument, then no GETATTR request will be generated.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Do this by grouping fields used for cached writes and putting them into a
union with fileds used for cached readdir (with obviously no overlap, since
we don't have hybrid objects).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Use the internal iversion counter to make sure modifications of the
directory through this filesystem are not missed by the mtime check (due to
mtime granularity).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Directory reading code is about to grow larger, so split it out from dir.c
into a new source file.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
"Various bug fixes and cleanups"
* tag 'fuse-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: reduce allocation size for splice_write
fuse: use kvmalloc to allocate array of pipe_buffer structs.
fuse: convert last timespec use to timespec64
fs: fuse: Adding new return type vm_fault_t
fuse: simplify fuse_abort_conn()
fuse: Add missed unlock_page() to fuse_readpages_fill()
fuse: Don't access pipe->buffers without pipe_lock()
fuse: fix initial parallel dirops
fuse: Fix oops at process_init_reply()
fuse: umount should wait for all requests
fuse: fix unlocked access to processing queue
fuse: fix double request_end()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs icache updates from Al Viro:
- NFS mkdir/open_by_handle race fix
- analogous solution for FUSE, replacing the one currently in mainline
- new primitive to be used when discarding halfway set up inodes on
failed object creation; gives sane warranties re icache lookups not
returning such doomed by still not freed inodes. A bunch of
filesystems switched to that animal.
- Miklos' fix for last cycle regression in iget5_locked(); -stable will
need a slightly different variant, unfortunately.
- misc bits and pieces around things icache-related (in adfs and jfs).
* 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jfs: don't bother with make_bad_inode() in ialloc()
adfs: don't put inodes into icache
new helper: inode_fake_hash()
vfs: don't evict uninitialized inode
jfs: switch to discard_new_inode()
ext2: make sure that partially set up inodes won't be returned by ext2_iget()
udf: switch to discard_new_inode()
ufs: switch to discard_new_inode()
btrfs: switch to discard_new_inode()
new primitive: discard_new_inode()
kill d_instantiate_no_diralias()
nfs_instantiate(): prevent multiple aliases for directory inode
|
|
The only user is fuse_create_new_entry(), and there it's used to
mitigate the same mkdir/open-by-handle race as in nfs_mkdir().
The same solution applies - unhash the mkdir argument, then
call d_splice_alias() and if that returns a reference to preexisting
alias, dput() and report success. ->mkdir() argument left unhashed
negative with the preexisting alias moved in the right place is just
fine from the ->mkdir() callers point of view.
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If parallel dirops are enabled in FUSE_INIT reply, then first operation may
leave fi->mutex held.
Reported-by: syzbot <syzbot+3f7b29af1baa9d0a55be@syzkaller.appspotmail.com>
Fixes: 5c672ab3f0ee ("fuse: serialize dirops by default")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
now it can be done...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__gfs2_lookup(), gfs2_create_inode(), nfs_finish_open() and fuse_create_open()
don't need 'opened' anymore. Get rid of that argument in those.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
'opened' argument of finish_open() is unused. Kill it.
Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
|
|
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now). IMA is another one (here and everywhere)...
Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Force a refresh of attributes from the fuse server in this case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The description of this flag says "Don't sync attributes with the server".
In other words: always use the attributes cached in the kernel and don't
send network or local messages to refresh the attributes.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Unprivileged users are normally restricted from mounting with the
allow_other option by system policy, but this could be bypassed for a mount
done with user namespace root permissions. In such cases allow_other should
not allow users outside the userns to access the mount as doing so would
give the unprivileged user the ability to manipulate processes it would
otherwise be unable to manipulate. Restrict allow_other to apply to users
in the same userns used at mount or a descendant of that namespace. Also
export current_in_userns() for use by fuse when built as a module.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dongsu Park <dongsu@kinvolk.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In order to support mounts from namespaces other than init_user_ns, fuse
must translate uids and gids to/from the userns of the process servicing
requests on /dev/fuse. This patch does that, with a couple of restrictions
on the namespace:
- The userns for the fuse connection is fixed to the namespace
from which /dev/fuse is opened.
- The namespace must be the same as s_user_ns.
These restrictions simplify the implementation by avoiding the need to pass
around userns references and by allowing fuse to rely on the checks in
setattr_prepare for ownership changes. Either restriction could be relaxed
in the future if needed.
For cuse the userns used is the opener of /dev/cuse. Semantically the cuse
support does not appear safe for unprivileged users. Practically the
permissions on /dev/cuse only make it accessible to the global root user.
If something slips through the cracks in a user namespace the only users
who will be able to use the cuse device are those users mapped into the
user namespace.
Translation in the posix acl is updated to use the uuser namespace of the
filesystem. Avoiding cases which might bypass this translation is handled
in a following change.
This change is stronlgy based on a similar change from Seth Forshee and
Dongsu Park.
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the
O_TRUNC flag in the OPEN request to truncate the file atomically with the
open.
In this mode there's no need to send a SETATTR request to userspace after
the open, so fuse_do_setattr() checks this mode and returns. But this
misses the important step of truncating the pagecache.
Add the missing parts of truncation to the ATTR_OPEN branch.
Reported-by: Chad Austin <chadaustin@fb.com>
Fixes: 6ff958edbf39 ("fuse: add atomic open+truncate support")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
|
|
Marios Titas running a Haskell program noticed a problem with fuse's
readdirplus: when it is interrupted by a signal, it skips one directory
entry.
The reason is that fuse erronously updates ctx->pos after a failed
dir_emit().
The issue originates from the patch adding readdirplus support.
Reported-by: Jakob Unterwurzacher <jakobunt@gmail.com>
Tested-by: Marios Titas <redneb@gmx.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 0b05b18381ee ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
|
|
The refreshed argument isn't used by any caller, get rid of it.
Use a helper for just updating the inode (no need to fill in a kstat).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
"A bugfix and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: release: private_data cannot be NULL
fuse: cleanup fuse_file refcounting
fuse: add missing FR_FORCE
|
|
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
struct fuse_file is stored in file->private_data. Make this always be a
counting reference for consistency.
This also allows fuse_sync_release() to call fuse_file_put() instead of
partially duplicating its functionality.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Commit bcb6f6d2b9c2 ("fuse: use timespec64") introduced clamped nsec values
in time_to_jiffies but used the max of nsec and NSEC_PER_SEC - 1 instead of
the min. Because of this, dentries would stay in the cache longer than
requested and go stale in scenarios that relied on their timely eviction.
Fixes: bcb6f6d2b9c2 ("fuse: use timespec64")
Signed-off-by: David Sheets <dsheets@docker.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # 4.9
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull partial readlink cleanups from Miklos Szeredi.
This is the uncontroversial part of the readlink cleanup patch-set that
simplifies the default readlink handling.
Miklos and Al are still discussing the rest of the series.
* git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
vfs: make generic_readlink() static
vfs: remove ".readlink = generic_readlink" assignments
vfs: default to generic_readlink()
vfs: replace calling i_op->readlink with vfs_readlink()
proc/self: use generic_readlink
ecryptfs: use vfs_get_link()
bad_inode: add missing i_op initializers
|
|
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Basically, the pjdfstests set the ownership of a file to 06555, and then
chowns it (as root) to a new uid/gid. Prior to commit a09f99eddef4 ("fuse:
fix killing s[ug]id in setattr"), fuse would send down a setattr with both
the uid/gid change and a new mode. Now, it just sends down the uid/gid
change.
Technically this is NOTABUG, since POSIX doesn't _require_ that we clear
these bits for a privileged process, but Linux (wisely) has done that and I
think we don't want to change that behavior here.
This is caused by the use of should_remove_suid(), which will always return
0 when the process has CAP_FSETID.
In fact we really don't need to be calling should_remove_suid() at all,
since we've already been indicated that we should remove the suid, we just
don't want to use a (very) stale mode for that.
This patch should fix the above as well as simplify the logic.
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: a09f99eddef4 ("fuse: fix killing s[ug]id in setattr")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
Add missing dentry initialization to root dentry.
Fixes: f75fdf22b0a8 ("fuse: don't use ->d_time")
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
|
|
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In preparation for posix acl support, rework fuse to use xattr handlers and
the generic setxattr/getxattr/listxattr callbacks. Split the xattr code
out into it's own file, and promote symbols to module-global scope as
needed.
Functionally these changes have no impact, as fuse still uses a single
handler for all xattrs which uses the old callbacks.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Only two flags: "default_permissions" and "allow_other". All other flags
are handled via bitfields. So convert these two as well. They don't
change during the lifetime of the filesystem, so this is quite safe.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
