summaryrefslogtreecommitdiffstats
path: root/fs/fuse/dax.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-18fuse: split fuse_mount off of fuse_connMax Reitz1-5/+5
We want to allow submounts for the same fuse_conn, but with different superblocks so that each of the submounts has its own device ID. To do so, we need to split all mount-specific information off of fuse_conn into a new fuse_mount structure, so that multiple mounts can share a single fuse_conn. We need to take care only to perform connection-level actions once (i.e. when the fuse_conn and thus the first fuse_mount are established, or when the last fuse_mount and thus the fuse_conn are destroyed). For example, fuse_sb_destroy() must invoke fuse_send_destroy() until the last superblock is released. To do so, we keep track of which fuse_mount is the root mount and perform all fuse_conn-level actions only when this fuse_mount is involved. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: add logic to free up a memory rangeVivek Goyal1-6/+517
Add logic to free up a busy memory range. Freed memory range will be returned to free pool. Add a worker which can be started to select and free some busy memory ranges. Process can also steal one of its busy dax ranges if free range is not available. I will refer it to as direct reclaim. If free range is not available and nothing can't be stolen from same inode, caller waits on a waitq for free range to become available. For reclaiming a range, as of now we need to hold following locks in specified order. down_write(&fi->i_mmap_sem); down_write(&fi->dax->sem); We look for a free range in following order. A. Try to get a free range. B. If not, try direct reclaim. C. If not, wait for a memory range to become free Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: maintain a list of busy elementsVivek Goyal1-0/+25
This list will be used selecting fuse_dax_mapping to free when number of free mappings drops below a threshold. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: serialize truncate/punch_hole and dax fault pathVivek Goyal1-0/+49
Currently in fuse we don't seem have any lock which can serialize fault path with truncate/punch_hole path. With dax support I need one for following reasons. 1. Dax requirement DAX fault code relies on inode size being stable for the duration of fault and want to serialize with truncate/punch_hole and they explicitly mention it. static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp, const struct iomap_ops *ops) /* * Check whether offset isn't beyond end of file now. Caller is * supposed to hold locks serializing us with truncate / punch hole so * this is a reliable test. */ max_pgoff = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE); 2. Make sure there are no users of pages being truncated/punch_hole get_user_pages() might take references to page and then do some DMA to said pages. Filesystem might truncate those pages without knowing that a DMA is in progress or some I/O is in progress. So use dax_layout_busy_page() to make sure there are no such references and I/O is not in progress on said pages before moving ahead with truncation. 3. Limitation of kvm page fault error reporting If we are truncating file on host first and then removing mappings in guest lateter (truncate page cache etc), then this could lead to a problem with KVM. Say a mapping is in place in guest and truncation happens on host. Now if guest accesses that mapping, then host will take a fault and kvm will either exit to qemu or spin infinitely. IOW, before we do truncation on host, we need to make sure that guest inode does not have any mapping in that region or whole file. 4. virtiofs memory range reclaim Soon I will introduce the notion of being able to reclaim dax memory ranges from a fuse dax inode. There also I need to make sure that no I/O or fault is going on in the reclaimed range and nobody is using it so that range can be reclaimed without issues. Currently if we take inode lock, that serializes read/write. But it does not do anything for faults. So I add another semaphore fuse_inode->i_mmap_sem for this purpose. It can be used to serialize with faults. As of now, I am adding taking this semaphore only in dax fault path and not regular fault path because existing code does not have one. May be existing code can benefit from it as well to take care of some races, but that we can fix later if need be. For now, I am just focussing only on DAX path which is new path. Also added logic to take fuse_inode->i_mmap_sem in truncate/punch_hole/open(O_TRUNC) path to make sure file truncation and fuse dax fault are mutually exlusive and avoid all the above problems. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: define dax address space operationsVivek Goyal1-0/+18
This is done along the lines of ext4 and xfs. I primarily wanted ->writepages hook at this time so that I could call into dax_writeback_mapping_range(). This in turn will decide which pfns need to be written back. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: add DAX mmap supportStefan Hajnoczi1-0/+59
Add DAX mmap() support. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: implement dax read/write operationsVivek Goyal1-0/+565
This patch implements basic DAX support. mmap() is not implemented yet and will come in later patches. This patch looks into implemeting read/write. We make use of interval tree to keep track of per inode dax mappings. Do not use dax for file extending writes, instead just send WRITE message to daemon (like we do for direct I/O path). This will keep write and i_size change atomic w.r.t crash. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: implement FUSE_INIT map_alignment fieldStefan Hajnoczi1-1/+14
The device communicates FUSE_SETUPMAPPING/FUSE_REMOVMAPPING alignment constraints via the FUST_INIT map_alignment field. Parse this field and ensure our DAX mappings meet the alignment constraints. We don't actually align anything differently since our mappings are already 2MB aligned. Just check the value when the connection is established. If it becomes necessary to honor arbitrary alignments in the future we'll have to adjust how mappings are sized. The upshot of this commit is that we can be confident that mappings will work even when emulating x86 on Power and similar combinations where the host page sizes are different. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: keep a list of free dax memory rangesVivek Goyal1-1/+90
Divide the dax memory range into fixed size ranges (2MB for now) and put them in a list. This will track free ranges. Once an inode requires a free range, we will take one from here and put it in interval-tree of ranges assigned to inode. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-10virtiofs: add a mount option to enable daxVivek Goyal1-0/+36
Add a mount option to allow using dax with virtio_fs. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>