summaryrefslogtreecommitdiffstats
path: root/fs/f2fs
AgeCommit message (Collapse)AuthorFilesLines
2014-06-09Merge tag 'for-f2fs-3.16' of ↵Linus Torvalds16-305/+639
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, there is no special interesting feature, but we've investigated a couple of tuning points with respect to the I/O flow. Several major bug fixes and a bunch of clean-ups also have been made. This patch-set includes the following major enhancement patches: - enhance wait_on_page_writeback - support SEEK_DATA and SEEK_HOLE - enhance readahead flows - enhance IO flushes - support fiemap - add some tracepoints The other bug fixes are as follows: - fix to support a large volume > 2TB correctly - recovery bug fix wrt fallocated space - fix recursive lock on xattr operations - fix some cases on the remount flow And, there are a bunch of cleanups" * tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: support f2fs_fiemap f2fs: avoid not to call remove_dirty_inode f2fs: recover fallocated space f2fs: fix to recover data written by dio f2fs: large volume support f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages f2fs: avoid overflow when large directory feathure is enabled f2fs: fix recursive lock by f2fs_setxattr MAINTAINERS: add a co-maintainer from samsung for F2FS MAINTAINERS: change the email address for f2fs f2fs: use inode_init_owner() to simplify codes f2fs: avoid to use slab memory in f2fs_issue_flush for efficiency f2fs: add a tracepoint for f2fs_read_data_page f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page f2fs: add a tracepoint for f2fs_write_end f2fs: add a tracepoint for f2fs_write_begin f2fs: fix checkpatch warning f2fs: deactivate inode page if the inode is evicted f2fs: decrease the lock granularity during write_begin ...
2014-06-08f2fs: support f2fs_fiemapJaegeuk Kim3-0/+8
This patch links f2fs_fiemap with generic function with get_block. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-07f2fs: avoid not to call remove_dirty_inodeJaegeuk Kim1-8/+13
There is an errorneous case during the recovery like below. In recovery_dentry, 1) dir = f2fs_iget(); 2) mark the dir with FI_DELAY_IPUT 3) goto unmap_out After the end of recovery routine, there is no dirty dentries so the dir cannot be released by iput in remove_dirty_dir_inode. This patch fixes such the bug case by handling the iget and iput in the recovery_dentry procedure. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-07f2fs: recover fallocated spaceJaegeuk Kim1-0/+1
If a fallocated file is fsynced, we should recover the i_size after sudden power cut. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04mm: non-atomically mark page accessed during page cache allocation where ↵Mel Gorman2-5/+0
possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04f2fs: fix to recover data written by dioJaegeuk Kim3-0/+16
If data are overwritten through dio, previous f2fs doesn't remain the fsync mark due to no additional node writes. Note that this patch should resolve the xfstests:311. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04f2fs: large volume supportChangman Lee2-7/+51
f2fs's cp has one page which consists of struct f2fs_checkpoint and version bitmap of sit and nat. To support lots of segments, we need more blocks for sit bitmap. So let's arrange sit bitmap as following: +-----------------+------------+ | f2fs_checkpoint | sit bitmap | | + nat bitmap | | +-----------------+------------+ 0 4k N blocks Signed-off-by: Changman Lee <cm224.lee@samsung.com> [Jaegeuk Kim: simple code change for readability] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pagesChao Yu1-28/+24
Previously we allocate pages with no mapping in ra_sum_pages(), so we may encounter a crash in event trace of f2fs_submit_page_mbio where we access mapping data of the page. We'd better allocate pages in bd_inode mapping and invalidate these pages after we restore data from pages. It could avoid crash in above scenario. Changes from V1 o remove redundant code in ra_sum_pages() suggested by Jaegeuk Kim. Call Trace: [<f1031630>] ? ftrace_raw_event_f2fs_write_checkpoint+0x80/0x80 [f2fs] [<f10377bb>] f2fs_submit_page_mbio+0x1cb/0x200 [f2fs] [<f103c5da>] restore_node_summary+0x13a/0x280 [f2fs] [<f103e22d>] build_curseg+0x2bd/0x620 [f2fs] [<f104043b>] build_segment_manager+0x1cb/0x920 [f2fs] [<f1032c85>] f2fs_fill_super+0x535/0x8e0 [f2fs] [<c115b66a>] mount_bdev+0x16a/0x1a0 [<f102f63f>] f2fs_mount+0x1f/0x30 [f2fs] [<c115c096>] mount_fs+0x36/0x170 [<c1173635>] vfs_kern_mount+0x55/0xe0 [<c1175388>] do_mount+0x1e8/0x900 [<c1175d72>] SyS_mount+0x82/0xc0 [<c16059cc>] sysenter_do_call+0x12/0x22 Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-04f2fs: avoid overflow when large directory feathure is enabledChao Yu1-2/+2
When large directory feathure is enable, We have one case which could cause overflow in dir_buckets() as following: special case: level + dir_level >= 32 and level < MAX_DIR_HASH_DEPTH / 2. Here we define MAX_DIR_BUCKETS to limit the return value when the condition could trigger potential overflow. Changes from V1 o modify description of calculation in f2fs.txt suggested by Changman Lee. Suggested-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-02f2fs: fix recursive lock by f2fs_setxattrJaegeuk Kim1-5/+5
This patch should resolve the following recursive lock. [<ffffffff8135a9c3>] call_rwsem_down_write_failed+0x13/0x20 [<ffffffffa01749dc>] f2fs_setxattr+0x5c/0xa0 [f2fs] [<ffffffffa0174c99>] __f2fs_set_acl+0x1b9/0x340 [f2fs] [<ffffffffa017515a>] f2fs_init_acl+0x4a/0xcb [f2fs] [<ffffffffa0159abe>] __f2fs_add_link+0x26e/0x780 [f2fs] [<ffffffffa015d4d8>] f2fs_mkdir+0xb8/0x150 [f2fs] [<ffffffff811cebd7>] vfs_mkdir+0xb7/0x160 [<ffffffff811cf89b>] SyS_mkdir+0xab/0xe0 [<ffffffff817244bf>] tracesys+0xe1/0xe6 [<ffffffffffffffff>] 0xffffffffffffffff The call path indicates: - f2fs_add_link : down_write(&fi->i_sem); - init_inode_metadata - f2fs_init_acl - __f2fs_set_acl - f2fs_setxattr : down_write(&fi->i_sem); Here we should not call f2fs_setxattr, but __f2fs_setxattr. But __f2fs_setxattr is a static function in xattr.c, so that I found the other generic approach to use f2fs_setxattr. In f2fs_setxattr, the page pointer is only given from init_inode_metadata. So, this patch adds this condition to avoid this in f2fs_setxattr. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-05-08f2fs: use inode_init_owner() to simplify codesChao Yu1-10/+1
This patch uses exported inode_init_owner() to simplify codes in f2fs_new_inode(). Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-08f2fs: avoid to use slab memory in f2fs_issue_flush for efficiencyChao Yu1-19/+9
If we use slab memory in f2fs_issue_flush(), we will face memory pressure and latency time caused by racing of kmem_cache_{alloc,free}. Let's alloc memory in stack instead of slab. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_read_data_pageChao Yu1-0/+2
This patch adds a tracepoint for f2fs_read_data_page to trace when page is readed by user. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pagesChao Yu3-0/+6
This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when pages are fsyncing/flushing. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pageChao Yu3-0/+6
This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when page is writting out. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_endChao Yu1-0/+2
This patch adds a tracepoint for f2fs_write_end to trace write op of user. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add a tracepoint for f2fs_write_beginChao Yu1-0/+2
This patch adds a tracepoint for f2fs_write_begin to trace write op of user. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: fix checkpatch warningZhang Zhen1-2/+2
fix the following checkpatch warning: WARNING: do {} while (0) macros should not be semicolon terminated Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: deactivate inode page if the inode is evictedJaegeuk Kim1-0/+1
If the inode page is clean during its inode eviction, it'd better drop the page to reduce further memory pressure. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: decrease the lock granularity during write_beginJaegeuk Kim1-1/+13
This patch reduces the lock granularity during write_begin. When the system is under memory pressure, it would be better to reduce the locking time for the data pages. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: no need to wait on page writebck to meta pagesJaegeuk Kim1-2/+2
This patch removes grab_cache_page_write_begin for meta pages. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: avoid grab_cache_page_write_begin for data pagesJaegeuk Kim2-3/+4
We don't need to wait on page writeback for these cases. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: split grab_cache_page and wait_on_page_writeback for node pagesJaegeuk Kim5-5/+16
This patch splits grab_cache_page_write_begin into grab_cache_page and wait_on_page_writeback for node pages. This patch intends to enhance the latency to get node pages by alleviating unnecessary wait_on_page_writeback. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: fix to truncate inline data in inode page when setattrChao Yu3-0/+22
Previous we do not truncate inline data in inode page when setattr, so following case could still read the inline data which has already truncated: 1.write inline data 2.ftruncate size to 0 3.ftruncate size to max inline data size 4.read from offset 0 This patch introduces truncate_inline_data() to fix this problem. change log from v1: o fix a bug and do not truncate first page data after truncate inline data. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: readahead multi pages of directory for performanceChao Yu2-0/+8
We have no so such readahead mechanism in ->iterate() path as the one in ->read() path, it cause low performance when we read large directory. This patch add readahead in f2fs_readdir() for better performance. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: set errno when f2fs_iget failed in recover_dentryChao Yu1-1/+2
We should set the error number correctly when we fail in recover_dentry(), so the recover flow could stop for the reason as error number shows instead of continuing. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: consider fallocated space for SEEK_DATAJaegeuk Kim1-4/+41
If an amount of data are allocated though fallocate and user writes a couple of data among the space, f2fs should return the data offset made by user when SEEK_DATA is requested. For example, (N: NEW_ADDR by fallocate, X: NEW_ADDR by user) 1) fallocate 0 ~ 10MB f -> N N N N N N N N N N N N ... N 2) write 4KB at 5MB offset f -> N N N N N X N N N N N N ... N 3) SEEK_DATA from 0 should return 5MB offset So, this patch adds a routine to search the first dirty page to handle that. Then, the SEEK_DATA flow skips NEW_ADDR offsets until any dirty page is found. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: return i_size if the hole is outside of i_sizeJaegeuk Kim1-2/+2
When SEEK_HOLE is requeted, it should return i_size if the hole position is found outside of i_size. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: introduce f2fs_seek_block to support SEEK_{DATA, HOLE} in llseekChao Yu2-1/+97
In This patch we introduce f2fs_seek_block to support SEEK_{DATA,HOLE} of lseek(2). change log from v1: o fix bug when lseek from middle of page and fix wrong calculation of PGOFS_OF_NEXT_DNODE macro. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: introduce help function {create,destroy}_flush_cmd_controlGu Zheng3-47/+43
Introduce help function {create,destroy}_flush_cmd_control to clean up the create/destory flush merge operation. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: introduce struct flush_cmd_control to wrap the flush_merge fieldsGu Zheng3-54/+78
Split the flush_merge fields from sm_i, and use the new struct flush_cmd_control to wrap it, so that we can igonre these fileds if flush_merge is disable, and it alse can the structs more neat. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: introduce help macro ADDRS_PER_PAGE()Chao Yu3-12/+4
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in direct node or inode. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: submit bio at the reclaim pathJaegeuk Kim1-0/+2
If f2fs_write_data_page is called through the reclaim path, we should submit the bio right away. This patch resolves the following issue that Marc Dietrich reported. "It took me a while to bisect a problem which causes my ARM (tegra2) netbook to frequently stall for 5-10 seconds when I enable EXA acceleration (opentegra experimental ddx)." And this patch fixes that. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: return errors right after checking themJaegeuk Kim1-1/+9
This patch adds two error conditions early in the setxattr operations. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: pass flags field to setxattr functionsJaegeuk Kim3-9/+10
This patch passes the "flags" field to the low level setxattr functions to use XATTR_REPLACE in the following patches. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: clean up long variable namesJaegeuk Kim2-45/+47
This patch includes simple clean-ups to reduce unnecessary long variable names. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: handle inline data independently in f2fs_bmapChao Yu1-0/+5
We'd better handle inline data case independently in f2fs_bmap(). It can reduce our handling time in f2fs_bmap(). Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: adjust free mem size to flush dentry blocksJaegeuk Kim4-21/+32
If so many dirty dentry blocks are cached, not reached to the flush condition, we should fall into livelock in balance_dirty_pages. So, let's consider the mem size for the condition. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: avoid BUG_ON when mouting corrupted image having garbage blocksJaegeuk Kim1-1/+5
If the disk has some garbage blocks, F2FS is able to face with BUG_ON when recovering direct node blocks. This patch detects the error case and avoids that prior to reaching BUG_ON. Alexey Khoroshilov addressed the potential security issues as follows. "An ability to trigger a BUG_ON assert by mounting a crafted image is usually considered as a local denial of service [1-3]. As far as I understand, the reason is that some kernel data may become inconsistent that can lead to further problems. [1] http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3353 [2] http://www.openwall.com/lists/oss-security/2011/06/24/4 [3] http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2928 etc." Reported-by: Andrey Tsyvarev <tsyvarev@ispras.ru> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add available_nids to fix handling max_nid correctlyJaegeuk Kim2-2/+5
This patch introduces available_nids for alloc_nids() and fixes max_nid for build_free_nids() and scan_nat_pages(). Signed-off-by: Chao Yu <chao2.yu@samsung.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add static to get_max_meta_blksFabian Frederick1-1/+1
inline get_max_meta_blks is only used in checkpoint.c Use standard static inline format. Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: introduce raw_nat_from_node_info() to simplfy codesChao Yu2-12/+11
This patch introduce raw_nat_from_node_info() to simplfy some codes, and also use exist function node_info_from_raw_nat() to do the same job. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: add the flush_merge handle in the remount flowGu Zheng3-3/+45
Add the *remount* handle of flush_merge option, so that the users can enable flush_merge in the runtime, such as the underlying device handles the cache_flush command relatively slowly. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: atomically set inode->i_flags in f2fs_set_inode_flags()Zhang Zhen1-8/+9
Use set_mask_bits() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the FS_IMMUTABLE_FL, FS_APPEND_FL, etc. flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time. Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: make recover_inline_xattr() staticJingoo Han1-1/+1
Make recover_inline_xattr() static, because this function is used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: remove costly dirty_dir_inode operationsJaegeuk Kim3-48/+25
This patch removes list opeations in handling dirty dir inodes. Previously, F2FS traverses whole the list of dirty dir inodes to check whether there is an existing inode or not, resulting in heavy CPU overheads. So this patch removes such the traverse operations by adding FI_DIRTY_DIR to indicate the inode lies on the list or not. Through this simple flag, we can remove redundant operations gracefully. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: fix to unlock f2fs_lock at the omitted error caseJaegeuk Kim1-6/+7
If it occurs an error, we should call f2fs_unlock_op. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: call redirty_page_for_writepageJaegeuk Kim3-15/+5
This patch replace some general codes with redirty_page_for_writepage, which can be enabled after consideration on additional procedure like counting dirty pages appropriately. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: avoid to conduct roll-forward due to the remained garbage blocksJaegeuk Kim3-2/+22
The f2fs always scans the next chain of direct node blocks. But some garbage blocks are able to be remained due to no discard support or SSR triggers. This occasionally wreaks recovering wrong inodes that were used or BUG_ONs due to reallocating node ids as follows. When mount this f2fs image: http://linuxtesting.org/downloads/f2fs_fault_image.zip BUG_ON is triggered in f2fs driver (messages below are generated on kernel 3.13.2; for other kernels output is similar): kernel BUG at fs/f2fs/node.c:215! Call Trace: [<ffffffffa032ebad>] recover_inode_page+0x1fd/0x3e0 [f2fs] [<ffffffff811446e7>] ? __lock_page+0x67/0x70 [<ffffffff81089990>] ? autoremove_wake_function+0x50/0x50 [<ffffffffa0337788>] recover_fsync_data+0x1398/0x15d0 [f2fs] [<ffffffff812b9e5c>] ? selinux_d_instantiate+0x1c/0x20 [<ffffffff811cb20b>] ? d_instantiate+0x5b/0x80 [<ffffffffa0321044>] f2fs_fill_super+0xb04/0xbf0 [f2fs] [<ffffffff811b861e>] ? mount_bdev+0x7e/0x210 [<ffffffff811b8769>] mount_bdev+0x1c9/0x210 [<ffffffffa0320540>] ? validate_superblock+0x210/0x210 [f2fs] [<ffffffffa031cf8d>] f2fs_mount+0x1d/0x30 [f2fs] [<ffffffff811b9497>] mount_fs+0x47/0x1c0 [<ffffffff81166e00>] ? __alloc_percpu+0x10/0x20 [<ffffffff811d4032>] vfs_kern_mount+0x72/0x110 [<ffffffff811d6763>] do_mount+0x493/0x910 [<ffffffff811615cb>] ? strndup_user+0x5b/0x80 [<ffffffff811d6c70>] SyS_mount+0x90/0xe0 [<ffffffff8166f8d9>] system_call_fastpath+0x16/0x1b Found by Linux File System Verification project (linuxtesting.org). Reported-by: Andrey Tsyvarev <tsyvarev@ispras.ru> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: enable flush_merge only in f2fs is not read-onlyGu Zheng2-4/+3
Enable flush_merge only in f2fs is not read-only, so does the mount option show. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 07:59:40 +0000