summaryrefslogtreecommitdiffstats
path: root/fs/f2fs/inline.c
AgeCommit message (Collapse)AuthorFilesLines
2015-01-09f2fs: use f2fs_io_info to clean up messy parameters during IO pathJaegeuk Kim1-4/+3
This patch cleans up parameters on IO paths. The key idea is to use f2fs_io_info adding a parameter, block address, and then use this structure as parameters. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25f2fs: fix to recover converted inline_dataJaegeuk Kim1-0/+3
If an inode has converted inline_data which was written to the disk, we should set its inode flag for further fsync so that this inline_data can be recovered from sudden power off. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25f2fs: make clean the page before writingJaegeuk Kim1-1/+6
If a page is set to be written to the disk, we can make clean the page. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-23f2fs: call flush_dcache_page when the page was updatedJaegeuk Kim1-0/+1
Whenever f2fs updates mapped pages, it needs to call flush_dcache_page. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-18f2fs: fix to call put_page at the error handling routineJaegeuk Kim1-3/+3
The locked page should be released before returning the function. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-11f2fs: convert inline_data when i_size becomes largeJaegeuk Kim1-0/+3
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode. Otherwise, we can make some dirty pages during the truncation, and those pages will be written through f2fs_write_data_page. At that moment, the inode has still inline_data, so that it tries to write non- zero pages into inline_data area. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-10f2fs: reduce the number of inline_data inode before clearing itJaegeuk Kim1-1/+1
The # of inline_data inode is decreased only when it has inline_data. After clearing the flag, we can't decreased the number. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-04f2fs: revisit inline_data to avoid data races and potential bugsJaegeuk Kim1-105/+98
This patch simplifies the inline_data usage with the following rule. 1. inline_data is set during the file creation. 2. If new data is requested to be written ranges out of inline_data, f2fs converts that inode permanently. 3. There is no cases which converts non-inline_data inode to inline_data. 4. The inline_data flag should be changed under inode page lock. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: flush_dcache_page for inline dataJaegeuk Kim1-0/+1
When reading inline data, we should call flush_dcache_page. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: declare f2fs_convert_inline_dir as a static functionJaegeuk Kim1-1/+1
This patch declares f2fs_convert_inline_dir as a static function, which was reported by kbuild test robot. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: use kmap_atomic instead of kmapJaegeuk Kim1-9/+8
For better performance, we need to use kmap_atomic instead of kmap. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: reuse make_empty_dir code for inline_dentryJaegeuk Kim1-17/+3
This patch introduces do_make_empty_dir to mitigate code redundancy for inline_dentry. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: introduce f2fs_dentry_ptr structure for code clean-upJaegeuk Kim1-9/+9
This patch introduces f2fs_dentry_ptr structure for the use of a function parameter in inline_dentry operations. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: reuse core function in f2fs_readdir for inline_dentryJaegeuk Kim1-32/+7
This patch introduces a core function, f2fs_fill_dentries, to remove redundant code in f2fs_readdir and f2fs_read_inline_dir. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: add stat info for inline_dentry inodesJaegeuk Kim1-1/+1
This patch adds status information for inline_dentry inodes. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: avoid deadlock on init_inode_metadataJaegeuk Kim1-3/+3
Previously, init_inode_metadata does not hold any parent directory's inode page. So, f2fs_init_acl can grab its parent inode page without any problem. But, when we use inline_dentry, that page is grabbed during f2fs_add_link, so that we can fall into deadlock condition like below. INFO: task mknod:11006 blocked for more than 120 seconds. Tainted: G OE 3.17.0-rc1+ #13 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mknod D ffff88003fc94580 0 11006 11004 0x00000000 ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8 0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220 ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002 Call Trace: [<ffffffff8173dc40>] ? bit_wait+0x50/0x50 [<ffffffff8173d4cd>] io_schedule+0x9d/0x130 [<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50 [<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0 [<ffffffff811640a7>] __lock_page+0x67/0x70 [<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40 [<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0 [<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs] [<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs] [<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs] [<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs] [<ffffffff8122d847>] get_acl+0x47/0x70 [<ffffffff8122db5a>] posix_acl_create+0x5a/0x150 [<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs] [<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs] [<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs] [<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs] [<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs] [<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs] [<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160 [<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200 [<ffffffff81741d7f>] tracesys+0xe1/0xe6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: fix to wait correct block typeJaegeuk Kim1-2/+2
The inode page needs to wait NODE block io. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: reuse find_in_block code for find_in_inline_dirJaegeuk Kim1-35/+17
This patch removes redundant copied code in find_in_inline_dir. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: reuse room_for_filename for inline dentry operationJaegeuk Kim1-25/+2
This patch introduces to reuse the existing room_for_filename for inline dentry operation. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: enable inline dir handlingChao Yu1-1/+1
Add inline dir functions into normal dir ops' function to handle inline ops. Besides, we enable inline dir mode when a new dir inode is created if inline_data option is on. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: add key function to handle inline dirChao Yu1-0/+346
Adds Functions to implement inline dir init/lookup/insert/delete/convert ops. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-03f2fs: should truncate any allocated block for inline_data writeJaegeuk Kim1-7/+8
When trying to write inline_data, we should truncate any data block allocated and pointed by the inode block. We should consider the data index is not 0. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-10-06f2fs: support atomic writesJaegeuk Kim1-0/+3
This patch introduces a very limited functionality for atomic write support. In order to support atomic write, this patch adds two ioctls: o F2FS_IOC_START_ATOMIC_WRITE o F2FS_IOC_COMMIT_ATOMIC_WRITE The database engine should be aware of the following sequence. 1. open -> ioctl(F2FS_IOC_START_ATOMIC_WRITE); 2. writes : all the written data will be treated as atomic pages. 3. commit -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); : this flushes all the data blocks to the disk, which will be shown all or nothing by f2fs recovery procedure. 4. repeat to #2. The IO pattens should be: ,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE CP | D D D D D D | FSYNC | D D D D | FSYNC ... `- COMMIT_ATOMIC_WRITE Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-09f2fs: need fsck.f2fs when f2fs_bug_on is triggeredJaegeuk Kim1-2/+2
If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-03f2fs: introduce F2FS_I_SB, F2FS_M_SB, and F2FS_P_SBJaegeuk Kim1-8/+5
This patch adds three inline functions to clean up dirty casting codes. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: skip if inline_data was converted alreadyJaegeuk Kim1-1/+5
This patch checks inline_data one more time under the inode page lock whether its inline_data is converted or not. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: avoid double lock in truncate_blocksJaegeuk Kim1-1/+1
The init_inode_metadata calls truncate_blocks when error is occurred. The callers holds f2fs_lock_op, so we should not call it again in truncate_blocks. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-19f2fs: make clear on test condition and return typesJaegeuk Kim1-5/+5
This patch adds a parentheses to make clear for condition check. And also it changes the return type for better meanings. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-19f2fs: should convert inline_data during the mkwriteJaegeuk Kim1-8/+12
If mkwrite is called to an inode having inline_data, it can overwrite the data index space as NEW_ADDR. (e.g., the first 4 bytes are coincidently zero) Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-29f2fs: add info of appended or updated data writesJaegeuk Kim1-0/+1
This patch introduces a inode number list in which represents inodes having appended data writes or updated data writes after last checkpoint. This will be used at fsync to determine whether the recovery information should be written or not. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-05-07f2fs: avoid grab_cache_page_write_begin for data pagesJaegeuk Kim1-1/+2
We don't need to wait on page writeback for these cases. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: split grab_cache_page and wait_on_page_writeback for node pagesJaegeuk Kim1-0/+6
This patch splits grab_cache_page_write_begin into grab_cache_page and wait_on_page_writeback for node pages. This patch intends to enhance the latency to get node pages by alleviating unnecessary wait_on_page_writeback. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: fix to truncate inline data in inode page when setattrChao Yu1-0/+18
Previous we do not truncate inline data in inode page when setattr, so following case could still read the inline data which has already truncated: 1.write inline data 2.ftruncate size to 0 3.ftruncate size to max inline data size 4.read from offset 0 This patch introduces truncate_inline_data() to fix this problem. change log from v1: o fix a bug and do not truncate first page data after truncate inline data. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07f2fs: fix to unlock f2fs_lock at the omitted error caseJaegeuk Kim1-6/+7
If it occurs an error, we should call f2fs_unlock_op. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-02f2fs: fix error path when fail to read inline dataChao Yu1-1/+3
We should unlock page in ->readpage() path and also should unlock & release page in error path of ->write_begin() to avoid deadlock or memory leak. So let's add release code to fix the problem when we fail to read inline data. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-14f2fs: remove the needless parameter of f2fs_wait_on_page_writebackYuan Zhong1-1/+1
"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback. We should remove this parameter. Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: avoid to read inline data except first pageChao Yu1-0/+6
Here is a case which could read inline page data not from first page. 1. write inline data 2. lseek to offset 4096 3. read 4096 bytes from offset 4096 (read_inline_data read inline data page to non-first page, And previously VFS has add this page to page cache) 4. ftruncate offset 8192 5. read 4096 bytes from offset 4096 (we meet this updated page with inline data in cache) So we should leave this page with inited data and uptodate flag for this case. Change log from v1: o fix a deadlock bug Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: avoid to left uninitialized data in page when read inline dataChao Yu1-3/+2
Change log from v1: o reduce unneeded memset in __f2fs_convert_inline_data >From 58796be2bd2becbe8d52305210fb2a64e7dd80b6 Mon Sep 17 00:00:00 2001 From: Chao Yu <chao2.yu@samsung.com> Date: Mon, 30 Dec 2013 09:21:33 +0800 Subject: [PATCH] f2fs: avoid to left uninitialized data in page when read inline data We left uninitialized data in the tail of page when we read an inline data page. So let's initialize left part of the page excluding inline data region. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: handle errors correctly during f2fs_reserve_blockJaegeuk Kim1-4/+2
The get_dnode_of_data nullifies inode and node page when error is occurred. There are two cases that passes inode page into get_dnode_of_data(). 1. make_empty_dir() -> get_new_data_page() -> f2fs_reserve_block(ipage) -> get_dnode_of_data() 2. f2fs_convert_inline_data() -> __f2fs_convert_inline_data() -> f2fs_reserve_block(ipage) -> get_dnode_of_data() This patch adds correct error handling codes when get_dnode_of_data() returns an error. At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block returns an error. So, the rule of f2fs_reserve_block() is to nullify inode page when there is any error internally. Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode() appropriately if they got an error since successful f2fs_reserve_block(). Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: add inline_data recovery routineJaegeuk Kim1-0/+48
This patch adds a inline_data recovery routine with the following policy. [prev.] [next] of inline_data flag o o -> recover inline_data o x -> remove inline_data, and then recover data blocks x o -> remove inline_data, and then recover inline_data x x -> recover data blocks Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: add the number of inline_data files to status infoJaegeuk Kim1-5/+2
This patch adds the number of inline_data files into the status information. Note that the number is reset whenever the filesystem is newly mounted. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-06f2fs: refactor f2fs_convert_inline_dataJaegeuk Kim1-14/+12
Change log from v1: o handle NULL pointer of grab_cache_page_write_begin() pointed by Chao Yu. This patch refactors f2fs_convert_inline_data to check a couple of conditions internally for deciding whether it needs to convert inline_data or not. So, the new f2fs_convert_inline_data initially checks: 1) f2fs_has_inline_data(), and 2) the data size to be changed. If the inode has inline_data but the size to fill is less than MAX_INLINE_DATA, then we don't need to convert the inline_data with data allocation. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26f2fs: key functions to handle inline dataHuajun Li1-0/+176
Functions to implement inline data read/write, and move inline data to normal data block when file size exceeds inline data limitation. Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 23:32:38 +0000