summaryrefslogtreecommitdiffstats
path: root/fs/f2fs/gc.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-10f2fs: clean up build warningsYi Zhuang1-1/+5
This patch combined the below three clean-up patches. - modify open brace '{' following function definitions - ERROR: spaces required around that ':' - ERROR: spaces required before the open parenthesis '(' - ERROR: spaces prohibited before that ',' - Made suggested modifications from checkpatch in reference to WARNING: Missing a blank line after declarations Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com> Signed-off-by: Jia Yang <jiayang5@huawei.com> Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-03-30f2fs: introduce gc_merge mount optionChao Yu1-4/+22
In this patch, we will add two new mount options: "gc_merge" and "nogc_merge", when background_gc is on, "gc_merge" option can be set to let background GC thread to handle foreground GC requests, it can eliminate the sluggish issue caused by slow foreground GC operation when GC is triggered from a process with limited I/O and CPU resources. Original idea is from Xiang. Signed-off-by: Gao Xiang <xiang@kernel.org> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-03-26f2fs: fix to avoid touching checkpointed data in get_victim()Chao Yu1-8/+20
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR mode to select victim: 1. LFS is set to find source section during GC, the victim should have no checkpointed data, since after GC, section could not be set free for reuse. Previously, we only check valid chpt blocks in current segment rather than section, fix it. 2. SSR | AT_SSR are set to find target segment for writes which can be fully filled by checkpointed and newly written blocks, we should never select such segment, otherwise it can cause panic or data corruption during allocation, potential case is described as below: a) target segment has 'n' (n < 512) ckpt valid blocks b) GC migrates 'n' valid blocks to other segment (segment is still in dirty list) c) GC migrates '512 - n' blocks to target segment (segment has 'n' cp_vblocks and '512 - n' vblocks) d) If GC selects target segment via {AT,}SSR allocator, however there is no free space in targe segment. Fixes: 4354994f097d ("f2fs: checkpoint disabling") Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-03-25f2fs: do not use AT_SSR mode in FG_GC & high urgent BG_GCWeichao Guo1-1/+2
AT_SSR mode is introduced by age threshold based GC for better hot/cold data seperation and avoiding free segment cost. However, LFS write mode is preferred in the scenario of foreground or high urgent GC, which should be finished ASAP. Let's only use AT_SSR in background GC and not high urgent GC modes. Signed-off-by: Weichao Guo <guoweichao@oppo.com> Signed-off-by: Huang Jianan <huangjianan@oppo.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-03-12f2fs: fix panic during f2fs_resize_fs()Chao Yu1-0/+13
f2fs_resize_fs() hangs in below callstack with testcase: - mkfs 16GB image & mount image - dd 8GB fileA - dd 8GB fileB - sync - rm fileA - sync - resize filesystem to 8GB kernel BUG at segment.c:2484! Call Trace: allocate_segment_by_default+0x92/0xf0 [f2fs] f2fs_allocate_data_block+0x44b/0x7e0 [f2fs] do_write_page+0x5a/0x110 [f2fs] f2fs_outplace_write_data+0x55/0x100 [f2fs] f2fs_do_write_data_page+0x392/0x850 [f2fs] move_data_page+0x233/0x320 [f2fs] do_garbage_collect+0x14d9/0x1660 [f2fs] free_segment_range+0x1f7/0x310 [f2fs] f2fs_resize_fs+0x118/0x330 [f2fs] __f2fs_ioctl+0x487/0x3680 [f2fs] __x64_sys_ioctl+0x8e/0xd0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is we forgot to check that whether we have enough space in resized filesystem to store all valid blocks in before-resizing filesystem, then allocator will run out-of-space during block migration in free_segment_range(). Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-03-12f2fs: fix to allow migrating fully valid segmentChao Yu1-9/+12
F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of target segment to other place, no matter the segment has partially or fully valid blocks. However, after commit 803e74be04b3 ("f2fs: stop GC when the victim becomes fully valid"), we may skip migration due to target segment is fully valid, result in failing the ioctl interface, fix this. Fixes: 803e74be04b3 ("f2fs: stop GC when the victim becomes fully valid") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: trival cleanup in move_data_block()Chao Yu1-5/+3
Trival cleanups: - relocate set_summary() before its use - relocate "allocate block address" to correct place - remove unneeded f2fs_wait_on_page_writeback() Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-12-02f2fs: change to use rwsem for cp_mutexSahitya Tummala1-2/+2
Use rwsem to ensure serialization of the callers and to avoid starvation of high priority tasks, when the system is under heavy IO workload. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-14f2fs: clean up kvfreeChao Yu1-2/+2
After commit 0b6d4ca04a86 ("f2fs: don't return vmalloc() memory from f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed memory, so clean up to use kfree() instead of kvfree() to free vmalloc()'ed memory. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11f2fs: support age threshold based garbage collectionChao Yu1-8/+372
There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-10f2fs: inherit mtime of original block during GCChao Yu1-2/+2
Don't let f2fs inner GC ruins original aging degree of segment. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-10f2fs: introduce inmem cursegChao Yu1-1/+1
Previous implementation of aligned pinfile allocation will: - allocate new segment on cold data log no matter whether last used segment is partially used or not, it makes IOs more random; - force concurrent cold data/GCed IO going into warm data area, it can make a bad effect on hot/cold data separation; In this patch, we introduce a new type of log named 'inmem curseg', the differents from normal curseg is: - it reuses existed segment type (CURSEG_XXX_NODE/DATA); - it only exists in memory, its segno, blkofs, summary will not b persisted into checkpoint area; With this new feature, we can enhance scalability of log, special allocators can be created for purposes: - pure lfs allocator for aligned pinfile allocation or file defragmentation - pure ssr allocator for later feature So that, let's update aligned pinfile allocation to use this new inmem curseg fwk. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-10f2fs: support zone capacity less than zone sizeAravind Ramesh1-6/+19
NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-07f2fs: add GC_URGENT_LOW mode in gc_urgentDaeho Jeong1-3/+3
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode F2FS will lower the bar of checking idle in order to process outstanding discard commands and GC a little bit aggressively. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-07f2fs: fix return value of move_data_block()Chao Yu1-1/+3
If f2fs_grab_cache_page() fails, it needs to return -ENOMEM. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-07f2fs: add f2fs_gc exception handle in f2fs_ioc_gc_rangeQilong Zhang1-6/+14
When f2fs_ioc_gc_range performs multiple segments gc ops, the return value of f2fs_ioc_gc_range is determined by the last segment gc ops. If its ops failed, the f2fs_ioc_gc_range will be considered to be failed despite some of previous segments gc ops succeeded. Therefore, so we fix: Redefine the return value of getting victim ops and add exception handle for f2fs_gc. In particular, 1).if target has no valid block, it will go on. 2).if target sectoion has valid block(s), but it is current section, we will reminder the caller. Signed-off-by: Qilong Zhang <zhangqilong3@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-07f2fs: clean up parameter of f2fs_allocate_data_block()Chao Yu1-1/+1
Use validation of @fio to inidcate whether caller want to serialize IOs in io.io_list or not, then @add_list will be redundant, remove it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-07f2fs: add prefix for exported symbolsChao Yu1-1/+1
to avoid polluting global symbol namespace. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-06-18f2fs: get the right gc victim section when section has several segmentsJack Qiu1-17/+24
Assume each section has 4 segment: .___________________________. |_Segment0_|_..._|_Segment3_| . . . . .__________. |_section0_| Segment 0~2 has 0 valid block, segment 3 has 512 valid blocks. It will fail if we want to gc section0 in this scenes, because all 4 segments in section0 is not dirty. So we should use dirty section bitmap instead of dirty segment bitmap to get right victim section. Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-11f2fs: add compressed/gc data read IO statChao Yu1-0/+2
in order to account data read IOs more accurately. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-11f2fs: refactor resize_fs to avoid meta updates in progressJaegeuk Kim1-49/+68
Sahitya raised an issue: - prevent meta updates while checkpoint is in progress allocate_segment_for_resize() can cause metapage updates if it requires to change the current node/data segments for resizing. Stop these meta updates when there is a checkpoint already in progress to prevent inconsistent CP data. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-04-17f2fs: support read iostatChao Yu1-0/+6
Adds to support accounting read IOs from userspace/kernel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-30f2fs: don't trigger data flush in foreground operationChao Yu1-1/+1
Data flush can generate heavy IO and cause long latency during flush, so it's not appropriate to trigger it in foreground operation. And also, we may face below potential deadlock during data flush: - f2fs_write_multi_pages - f2fs_write_raw_pages - f2fs_write_single_data_page - f2fs_balance_fs - f2fs_balance_fs_bg - f2fs_sync_dirty_inodes - filemap_fdatawrite -- stuck on flush same cluster Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-22f2fs: fix to update f2fs_super_block fields under sb_lockChao Yu1-4/+13
Fields in struct f2fs_super_block should be updated under coverage of sb_lock, fix to adjust update_sb_metadata() for that rule. Fixes: 04f0b2eaa3b3 ("f2fs: ioctl for removing a range from F2FS") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-22f2fs: Fix mount failure due to SPO after a successful online resize FSSahitya Tummala1-0/+6
Even though online resize is successfully done, a SPO immediately after resize, still causes below error in the next mount. [ 11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856 [ 11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint This is because after FS metadata is updated in update_fs_metadata() if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect the new user_block_count. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: skip migration only when BG_GC is calledJaegeuk Kim1-1/+1
FG_GC needs to move entire section more quickly. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: introduce DEFAULT_IO_TIMEOUTChao Yu1-1/+2
As Geert Uytterhoeven reported: for parameter HZ/50 in congestion_wait(BLK_RW_ASYNC, HZ/50); On some platforms, HZ can be less than 50, then unexpected 0 timeout jiffies will be set in congestion_wait(). This patch introduces a macro DEFAULT_IO_TIMEOUT to wrap a determinate value with msecs_to_jiffies(20) to instead HZ/50 to avoid such issue. Quoted from Geert Uytterhoeven: "A timeout of HZ means 1 second. HZ/50 means 20 ms, but has the risk of being zero, if HZ < 50. If you want to use a timeout of 20 ms, you best use msecs_to_jiffies(20), as that takes care of the special cases, and never returns 0." Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: skip GC when section is fullJaegeuk Kim1-2/+2
This fixes skipping GC when segment is full in large section. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: add migration count iff migration happensJaegeuk Kim1-1/+1
If first segment is empty and migration_granularity is 1, we can't move this at all. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: clean up bggc mount optionChao Yu1-1/+5
There are three status for background gc: on, off and sync, it's a little bit confused to use test_opt(BG_GC) and test_opt(FORCE_FG_GC) combinations to indicate status of background gc. So let's remove F2FS_MOUNT_BG_GC and F2FS_MOUNT_FORCE_FG_GC mount options, and add F2FS_OPTION().bggc_mode with below three status to clean up codes and enhance bggc mode's scalability. enum { BGGC_MODE_ON, /* background gc is on */ BGGC_MODE_OFF, /* background gc is off */ BGGC_MODE_SYNC, /* * background gc is on, migrating blocks * like foreground gc */ }; Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: clean up lfs/adaptive mount optionChao Yu1-1/+1
This patch removes F2FS_MOUNT_ADAPTIVE and F2FS_MOUNT_LFS mount options, and add F2FS_OPTION.fs_mode with below two status to indicate filesystem mode. enum { FS_MODE_ADAPTIVE, /* use both lfs/ssr allocation */ FS_MODE_LFS, /* use lfs allocation only */ }; It can enhance code readability and fs mode's scalability. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: clean up codes with {f2fs_,}data_blkaddr()Chao Yu1-1/+1
- rename datablock_addr() to data_blkaddr(). - wrap data_blkaddr() with f2fs_data_blkaddr() to clean up parameters. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-10f2fs: fix inconsistent commentsChao Yu1-1/+4
Lack of maintenance on comments may mislead developers, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-23f2fs: Add f2fs stats to sysfsHridya Valsaraju1-1/+1
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted. The following sysfs nodes are added: -/sys/fs/f2fs/<disk>/free_segments -/sys/fs/f2fs/<disk>/cp_foreground_calls -/sys/fs/f2fs/<disk>/cp_background_calls -/sys/fs/f2fs/<disk>/gc_foreground_calls -/sys/fs/f2fs/<disk>/gc_background_calls -/sys/fs/f2fs/<disk>/moved_blocks_foreground -/sys/fs/f2fs/<disk>/moved_blocks_background -/sys/fs/f2fs/<disk>/avg_vblocks Signed-off-by: Hridya Valsaraju <hridya@google.com> [Jaegeuk Kim: allow STAT_FS without DEBUG_FS] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-17f2fs: change to use rwsem for gc_mutexChao Yu1-6/+6
Mutex lock won't serialize callers, in order to avoid starving of unlucky caller, let's use rwsem lock instead. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-17f2fs: run fsck when getting bad inode during GCJaegeuk Kim1-1/+3
This is to avoid inifinite GC when trying to disable checkpoint. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-25f2fs: stop GC when the victim becomes fully validJaegeuk Kim1-2/+8
We must stop GC, once the segment becomes fully valid. Otherwise, it can produce another dirty segments by moving valid blocks in the segment partially. Ramon hit no free segment panic sometimes and saw this case happens when validating reliable file pinning feature. Signed-off-by: Ramon Pantin <pantin@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-19f2fs: show f2fs instance in printk_ratelimitedChao Yu1-1/+1
As Eric mentioned, bare printk{,_ratelimited} won't show which filesystem instance these message is coming from, this patch tries to show fs instance with sb->s_id field in all places we missed before. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-10-22f2fs: update multi-dev metadata in resize_fsQiuyang Sun1-2/+32
Multi-device metadata should be updated in resize_fs as well. Also, we check that the new FS size still reaches the last device. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-09f2fs: Fix indefinite loop in f2fs_gc()Sahitya Tummala1-1/+1
Policy - foreground GC, LFS mode and greedy GC mode. Under this policy, f2fs_gc() loops forever to GC as it doesn't have enough free segements to proceed and thus it keeps calling gc_more for the same victim segment. This can happen if the selected victim segment could not be GC'd due to failed blkaddr validity check i.e. is_alive() returns false for the blocks set in current validity map. Fix this by not resetting the sbi->cur_victim_sec to NULL_SEGNO, when the segment selected could not be GC'd. This helps to select another segment for GC and thus helps to proceed forward with GC. [Note] This can happen due to is_alive as well as atomic_file which skipps GC. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-08-23f2fs: Fix indefinite loop in f2fs_gc()Sahitya Tummala1-1/+24
Policy - Foreground GC, LFS and greedy GC mode. Under this policy, f2fs_gc() loops forever to GC as it doesn't have enough free segements to proceed and thus it keeps calling gc_more for the same victim segment. This can happen if the selected victim segment could not be GC'd due to failed blkaddr validity check i.e. is_alive() returns false for the blocks set in current validity map. Fix this by keeping track of such invalid segments and skip those segments for selection in get_victim_by_default() to avoid endless GC loop under such error scenarios. Currently, add this logic under CONFIG_F2FS_CHECK_FS to be able to root cause the issue in debug version. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix wrong bitmap size] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-26f2fs: fix to read source block before invalidating itJaegeuk Kim1-36/+34
f2fs_allocate_data_block() invalidates old block address and enable new block address. Then, if we try to read old block by f2fs_submit_page_bio(), it will give WARN due to reading invalid blocks. Let's make the order sanely back. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02f2fs: use generic EFSBADCRC/EFSCORRUPTEDChao Yu1-3/+3
f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02f2fs: introduce f2fs_<level> macros to wrap f2fs_printk()Joe Perches1-14/+9
- Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02f2fs: ioctl for removing a range from F2FSQiuyang Sun1-2/+180
This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-23f2fs: allow ssr block allocation during checkpoint=disable periodJaegeuk Kim1-1/+2
This patch allows to use ssr during checkpoint is disabled. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-08f2fs: introduce DATA_GENERIC_ENHANCEChao Yu1-1/+10
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-08f2fs: allow address pointer number of dnode aligning to specified sizeChao Yu1-1/+1
This patch expands scalability of dnode layout, it allows address pointer number of dnode aligning to specified size (now, the size is one byte by default), and later the number can align to compress cluster size (1 << n bytes, n=[2,..)), it can avoid cluster acrossing two dnode, making design of compress meta layout simple. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-08f2fs: fix to avoid deadloop in foreground GCChao Yu1-0/+1
As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203211 - Overview When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating. The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on. - Reproduces mkdir test mount -t f2fs tmp.img test cd test touch t - Messages [ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT [ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT ... (repeating) During GC, if segment type stored in SSA and SIT is inconsistent, we just skip migrating current segment directly, since we need to know the exact type to decide the migration function we use. So in foreground GC, we will easily run into a infinite loop as we may select the same victim segment which has inconsistent type due to greedy policy. In order to end up this, we choose to shutdown filesystem. For backgrond GC, we need to do that as well, so that we can avoid latter potential infinite looped foreground GC. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-05f2fs: Fix use of number of devicesDamien Le Moal1-1/+1
For a single device mount using a zoned block device, the zone information for the device is stored in the sbi->devs single entry array and sbi->s_ndevs is set to 1. This differs from a single device mount using a regular block device which does not allocate sbi->devs and sets sbi->s_ndevs to 0. However, sbi->s_devs == 0 condition is used throughout the code to differentiate a single device mount from a multi-device mount where sbi->s_ndevs is always larger than 1. This results in problems with single zoned block device volumes as these are treated as multi-device mounts but do not have the start_blk and end_blk information set. One of the problem observed is skipping of zone discard issuing resulting in write commands being issued to full zones or unaligned to a zone write pointer. Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single regular block device mount) and sbi->s_ndevs == 1 (single zoned block device mount) in the same manner. This is done by introducing the helper function f2fs_is_multi_device() and using this helper in place of direct tests of sbi->s_ndevs value, improving code readability. Fixes: 7bb3a371d199 ("f2fs: Fix zoned block device support") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 09:50:00 +0000