summaryrefslogtreecommitdiffstats
path: root/fs/ext4
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29Merge tag 'ext4_for_linus_fixes' of ↵Linus Torvalds9-133/+73
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Bug fixes for the new ext4 fast commit feature, plus a fix for the 'data=journal' bug fix. Also use the generic casefolding support which has now landed in fs/libfs.c for 5.10" * tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/... ext4: use generic casefolding support ext4: do not use extent after put_bh ext4: use IS_ERR() for error checking of path ext4: fix mmap write protection for data=journal mode jbd2: fix a kernel-doc markup ext4: use s_mount_flags instead of s_mount_state for fast commit state ext4: make num of fast commit blocks configurable ext4: properly check for dirty state in ext4_inode_datasync_dirty() ext4: fix double locking in ext4_fc_commit_dentry_updates()
2020-10-28ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...Theodore Ts'o1-0/+2
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: use generic casefolding supportDaniel Rosenberg5-93/+17
This switches ext4 over to the generic support provided in libfs. Since casefolded dentries behave the same in ext4 and f2fs, we decrease the maintenance burden by unifying them, and any optimizations will immediately apply to both. Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: do not use extent after put_bhyangerkun1-15/+15
ext4_ext_search_right() will read more extent blocks and call put_bh after we get the information we need. However, ret_ex will break this and may cause use-after-free once pagecache has been freed. Fix it by copying the extent structure if needed. Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-10-28ext4: use IS_ERR() for error checking of pathHarshad Shirwadkar1-2/+4
With this fix, fast commit recovery code uses IS_ERR() for path returned by ext4_find_extent. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027204342.2794949-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: fix mmap write protection for data=journal modeJan Kara1-2/+3
Commit afb585a97f81 "ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write() to track inode ranges whose mappings need to get write-protected during transaction commits. However the added calls use wrong start of a range (0 instead of page offset) and so write protection is not necessarily effective. Use correct range start to fix the problem. Fixes: afb585a97f81 ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: use s_mount_flags instead of s_mount_state for fast commit stateHarshad Shirwadkar3-15/+15
Ext4's fast commit related transient states should use sb->s_mount_flags instead of persistent sb->s_mount_state. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: make num of fast commit blocks configurableHarshad Shirwadkar1-1/+11
This patch reserves a field in the jbd2 superblock for number of fast commit blocks. When this value is non-zero, Ext4 uses this field to set the number of fast commit blocks. Fixes: 6866d7b3f2bb ("ext4/jbd2: add fast commit initialization") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: properly check for dirty state in ext4_inode_datasync_dirty()Andrea Righi1-4/+6
ext4_inode_datasync_dirty() needs to return 'true' if the inode is dirty, 'false' otherwise, but the logic seems to be incorrectly changed by commit aa75f4d3daae ("ext4: main fast-commit commit path"). This introduces a problem with swap files that are always failing to be activated, showing this error in dmesg: [ 34.406479] swapon: file is not committed Simple test case to reproduce the problem: # fallocate -l 8G swapfile # chmod 0600 swapfile # mkswap swapfile # swapon swapfile Fix the logic to return the proper state of the inode. Link: https://lore.kernel.org/lkml/20201024131333.GA32124@xps-13-7390 Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: fix double locking in ext4_fc_commit_dentry_updates()Harshad Shirwadkar1-1/+0
Fixed double locking of sbi->s_fc_lock in the above function as reported by kernel-test-robot. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201023161339.1449437-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-24Merge branch 'work.misc' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff all over the place (the largest group here is Christoph's stat cleanups)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove KSTAT_QUERY_FLAGS fs: remove vfs_stat_set_lookup_flags fs: move vfs_fstatat out of line fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat fs: remove vfs_statx_fd fs: omfs: use kmemdup() rather than kmalloc+memcpy [PATCH] reduce boilerplate in fsid handling fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS selftests: mount: add nosymfollow tests Add a "nosymfollow" mount option.
2020-10-22Merge tag 'ext4_for_linus' of ↵Linus Torvalds27-336/+3844
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The siginificant new ext4 feature this time around is Harshad's new fast_commit mode. In addition, thanks to Mauricio for fixing a race where mmap'ed pages that are being changed in parallel with a data=journal transaction commit could result in bad checksums in the failure that could cause journal replays to fail. Also notable is Ritesh's buffered write optimization which can result in significant improvements on parallel write workloads. (The kernel test robot reported a 330.6% improvement on fio.write_iops on a 96 core system using DAX) Besides that, we have the usual miscellaneous cleanups and bug fixes" Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits) ext4: fix invalid inode checksum ext4: add fast commit stats in procfs ext4: add a mount opt to forcefully turn fast commits on ext4: fast commit recovery path jbd2: fast commit recovery path ext4: main fast-commit commit path jbd2: add fast commit machinery ext4 / jbd2: add fast commit initialization ext4: add fast_commit feature and handling for extended mount options doc: update ext4 and journalling docs to include fast commit feature ext4: Detect already used quota file early jbd2: avoid transaction reuse after reformatting ext4: use the normal helper to get the actual inode ext4: fix bs < ps issue reported with dioread_nolock mount opt ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() ext4: data=journal: fixes for ext4_page_mkwrite() jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers() jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers() ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable() ext4: use ext4_sb_bread() instead of sb_bread() ...
2020-10-21ext4: fix invalid inode checksumLuo Meng1-5/+6
During the stability test, there are some errors: ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid. If the inode->i_iblocks too big and doesn't set huge file flag, checksum will not be recalculated when update the inode information to it's buffer. If other inode marks the buffer dirty, then the inconsistent inode will be flushed to disk. Fix this problem by checking i_blocks in advance. Cc: stable@kernel.org Signed-off-by: Luo Meng <luomeng12@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: add fast commit stats in procfsHarshad Shirwadkar3-1/+37
This commit adds a file in procfs that tracks fast commit related statistics. root@kvm-xfstests:/mnt# cat /proc/fs/ext4/vdc/fc_info fc stats: 7772 commits 15 ineligible 4083 numblks 2242us avg_commit_time Ineligible reasons: "Extended attributes changed": 0 "Cross rename": 0 "Journal flag changed": 0 "Insufficient memory": 0 "Swap boot": 0 "Resize": 0 "Dir renamed": 0 "Falloc range op": 0 "FC Commit Failed": 15 Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-10-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: add a mount opt to forcefully turn fast commits onHarshad Shirwadkar1-1/+5
This is a debug only mount option that forcefully turns fast commits on at mount time. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-9-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: fast commit recovery pathHarshad Shirwadkar13-127/+1769
This patch adds fast commit recovery path support for Ext4 file system. We add several helper functions that are similar in spirit to e2fsprogs journal recovery path handlers. Example of such functions include - a simple block allocator, idempotent block bitmap update function etc. Using these routines and the fast commit log in the fast commit area, the recovery path (ext4_fc_replay()) performs fast commit log recovery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21jbd2: fast commit recovery pathHarshad Shirwadkar1-0/+15
This patch adds fast commit recovery support in JBD2. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-7-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: main fast-commit commit pathHarshad Shirwadkar12-29/+1535
This patch adds main fast commit commit path handlers. The overall patch can be divided into two inter-related parts: (A) Metadata updates tracking This part consists of helper functions to track changes that need to be committed during a commit operation. These updates are maintained by Ext4 in different in-memory queues. Following are the APIs and their short description that are implemented in this patch: - ext4_fc_track_link/unlink/creat() - Track unlink. link and creat operations - ext4_fc_track_range() - Track changed logical block offsets inodes - ext4_fc_track_inode() - Track inodes - ext4_fc_mark_ineligible() - Mark file system fast commit ineligible() - ext4_fc_start_update() / ext4_fc_stop_update() / ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These functions are useful for co-ordinating inode updates with commits. (B) Main commit Path This part consists of functions to convert updates tracked in in-memory data structures into on-disk commits. Function ext4_fc_commit() is the main entry point to commit path. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21jbd2: add fast commit machineryHarshad Shirwadkar1-0/+8
This functions adds necessary APIs needed in JBD2 layer for fast commits. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4 / jbd2: add fast commit initializationHarshad Shirwadkar5-1/+35
This patch adds fast commit area trackers in the journal_t structure. These are initialized via the jbd2_fc_init() routine that this patch adds. This patch also adds ext4/fast_commit.c and ext4/fast_commit.h files for fast commit code that will be added in subsequent patches in this series. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21ext4: add fast_commit feature and handling for extended mount optionsHarshad Shirwadkar2-5/+26
We are running out of mount option bits. Add handling for using s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add ability to turn off the fast commit feature in Ext4. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: Detect already used quota file earlyJan Kara1-0/+5
When we try to use file already used as a quota file again (for the same or different quota type), strange things can happen. At the very least lockdep annotations may be wrong but also inode flags may be wrongly set / reset. When the file is used for two quota types at once we can even corrupt the file and likely crash the kernel. Catch all these cases by checking whether passed file is already used as quota file and bail early in that case. This fixes occasional generic/219 failure due to lockdep complaint. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201015110330.28716-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: use the normal helper to get the actual inodeKaixu Xia1-2/+2
Here we use the READ_ONCE to fix race conditions in ->d_compare() and ->d_hash() when they are called in RCU-walk mode, seems we can use the normal helper d_inode_rcu() to get the actual inode. Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/1602317416-1260-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: fix bs < ps issue reported with dioread_nolock mount optRitesh Harjani2-2/+2
left shifting m_lblk by blkbits was causing value overflow and hence it was not able to convert unwritten to written extent. So, make sure we typecast it to loff_t before do left shift operation. Also in func ext4_convert_unwritten_io_end_vec(), make sure to initialize ret variable to avoid accidentally returning an uninitialized ret. This patch fixes the issue reported in ext4 for bs < ps with dioread_nolock mount option. Fixes: c8cc88163f40df39e50c ("ext4: Add support for blocksize < pagesize in dioread_nolock") Cc: stable@kernel.org Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/af902b5db99e8b73980c795d84ad7bb417487e76.1602168865.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()Mauricio Faria de Oliveira2-11/+101
This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: data=journal: fixes for ext4_page_mkwrite()Mauricio Faria de Oliveira1-7/+44
These are two fixes for data journalling required by the next patch, discovered while testing it. First, the optimization to return early if all buffers are mapped is not appropriate for the next patch: The inode _must_ be added to the transaction's list in data=journal mode (so to write-protect pages on commit) thus we cannot return early there. Second, once that optimization to reduce transactions was disabled for data=journal mode, more transactions happened, and occasionally hit this warning message: 'JBD2: Spotted dirty metadata buffer'. Reason is, block_page_mkwrite() will set_buffer_dirty() before do_journal_get_write_access() that is there to prevent it. This issue was masked by the optimization. So, on data=journal use __block_write_begin() instead. This also requires page locking and len recalculation. (see block_page_mkwrite() for implementation details.) Finally, as Jan noted there is little sharing between data=journal and other modes in ext4_page_mkwrite(). However, a prototype of ext4_journalled_page_mkwrite() showed there still would be lots of duplicated lines (tens of) that didn't seem worth it. Thus this patch ends up with an ugly goto to skip all non-data journalling code (to avoid long indentations, but that can be changed..) in the beginning, and just a conditional in the transaction section. Well, we skip a common part to data journalling which is the page truncated check, but we do it again after ext4_journal_start() when we re-acquire the page lock (so not to acquire the page lock twice needlessly for data journalling.) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-4-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18jbd2, ext4, ocfs2: introduce/use journal callbacks ↵Mauricio Faria de Oliveira1-0/+4
j_submit|finish_inode_data_buffers() Introduce journal callbacks to allow different behaviors for an inode in journal_submit|finish_inode_data_buffers(). The existing users of the current behavior (ext4, ocfs2) are adapted to use the previously exported functions that implement the current behavior. Users are callers of jbd2_journal_inode_ranged_write|wait(), which adds the inode to the transaction's inode list with the JI_WRITE|WAIT_DATA flags. Only ext4 and ocfs2 in-tree. Both CONFIG_EXT4_FS and CONFIG_OCSFS2_FS select CONFIG_JBD2, which builds fs/jbd2/commit.c and journal.c that define and export the functions, so we can call directly in ext4/ocfs2. Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-3-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()zhangyi (F)2-9/+31
Now we only use sb_bread_unmovable() to read superblock and descriptor block at mount time, so there is no opportunity that we need to clear buffer verified bit and also handle buffer write_io error bit. But for the sake of unification, let's introduce ext4_sb_bread_unmovable() to replace all sb_bread_unmovable(). After this patch, we stop using read helpers in fs/buffer.c. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-8-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: use ext4_sb_bread() instead of sb_bread()zhangyi (F)2-7/+7
We have already remove open codes that invoke helpers provide by fs/buffer.c in all places reading metadata buffers. This patch switch to use ext4_sb_bread() to replace all sb_bread() helpers, which is ext4_read_bh() helper back end. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-7-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: introduce ext4_sb_breadahead_unmovable() to replace ↵zhangyi (F)3-2/+13
sb_breadahead_unmovable() If we readahead inode tables in __ext4_get_inode_loc(), it may bypass buffer_write_io_error() check, so introduce ext4_sb_breadahead_unmovable() to handle this special case. This patch also replace sb_breadahead_unmovable() in ext4_fill_super() for the sake of unification. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-6-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: use ext4_buffer_uptodate() in __ext4_get_inode_loc()zhangyi (F)1-10/+1
We have already introduced ext4_buffer_uptodate() to re-set the uptodate bit on buffer which has been failed to write out to disk. Just remove the redundant codes and switch to use ext4_buffer_uptodate() in __ext4_get_inode_loc(). Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200924073337.861472-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: use common helpers in all places reading metadata bufferszhangyi (F)9-54/+36
Revome all open codes that read metadata buffers, switch to use ext4_read_bh_*() common helpers. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: introduce new metadata buffer read helperszhangyi (F)2-0/+67
The previous patch add clear_buffer_verified() before we read metadata block from disk again, but it's rather easy to miss clearing of this bit because currently we read metadata buffer through different open codes (e.g. ll_rw_block(), bh_submit_read() and invoke submit_bh() directly). So, it's time to add common helpers to unify in all the places reading metadata buffers instead. This patch add 3 helpers: - ext4_read_bh_nowait(): async read metadata buffer if it's actually not uptodate, clear buffer_verified bit before read from disk. - ext4_read_bh(): sync version of read metadata buffer, it will wait until the read operation return and check the return status. - ext4_read_bh_lock(): try to lock the buffer before read buffer, it will skip reading if the buffer is already locked. After this patch, we need to use these helpers in all the places reading metadata buffer instead of different open codes. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200924073337.861472-3-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: clear buffer verified flag if read meta block from diskzhangyi (F)5-1/+8
The metadata buffer is no longer trusted after we read it from disk again because it is not uptodate for some reasons (e.g. failed to write back). Otherwise we may get below memory corruption problem in ext4_ext_split()->memset() if we read stale data from the newly allocated extent block on disk which has been failed to async write out but miss verify again since the verified bit has already been set on the buffer. [ 29.774674] BUG: unable to handle kernel paging request at ffff88841949d000 ... [ 29.783317] Oops: 0002 [#2] SMP [ 29.784219] R10: 00000000000f4240 R11: 0000000000002e28 R12: ffff88842fa1c800 [ 29.784627] CPU: 1 PID: 126 Comm: kworker/u4:3 Tainted: G D W [ 29.785546] R13: ffffffff9cddcc20 R14: ffffffff9cddd420 R15: ffff88842fa1c2f8 [ 29.786679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS ?-20190727_0738364 [ 29.787588] FS: 0000000000000000(0000) GS:ffff88842fa00000(0000) knlGS:0000000000000000 [ 29.789288] Workqueue: writeback wb_workfn [ 29.790319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.790321] (flush-8:0) [ 29.790844] CR2: 0000000000000008 CR3: 00000004234f2000 CR4: 00000000000006f0 [ 29.791924] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.792839] RIP: 0010:__memset+0x24/0x30 [ 29.793739] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.794256] Code: 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 033 [ 29.795161] Kernel panic - not syncing: Fatal exception in interrupt ... [ 29.808149] Call Trace: [ 29.808475] ext4_ext_insert_extent+0x102e/0x1be0 [ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0 [ 29.809652] ext4_map_blocks+0x290/0x8a0 [ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0 [ 29.809652] ext4_map_blocks+0x290/0x8a0 [ 29.810161] ext4_writepages+0xc85/0x17c0 ... Fix this by clearing buffer's verified bit if we read meta block from disk again. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200924073337.861472-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: limit entries returned when counting fsmap recordsDarrick J. Wong1-0/+3
If userspace asked fsmap to try to count the number of entries, we cannot return more than UINT_MAX entries because fmh_entries is u32. Therefore, stop counting if we hit this limit or else we will waste time to return truncated results. Fixes: 0c9ec4beecac ("ext4: support GETFSMAP ioctls") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20201001222148.GA49520@magnolia Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: make mb_check_counter per groupChunguang Xu2-5/+5
Make bb_check_counter per group, so each group has the same chance to be checked, which can expose errors more easily. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/1601292995-32205-2-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: delete invalid comments near mb_buddy_adjust_borderChunguang Xu1-3/+0
The comment near mb_buddy_adjust_border seems meaningless, just clear it. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/1601292995-32205-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: fix bdev write error check failed when mount fs with roZhang Xiaoxu1-11/+2
Consider a situation when a filesystem was uncleanly shutdown and the orphan list is not empty and a read-only mount is attempted. The orphan list cleanup during mount will fail with: ext4_check_bdev_write_error:193: comm mount: Error while async write back metadata This happens because sbi->s_bdev_wb_err is not initialized when mounting the filesystem in read only mode and so ext4_check_bdev_write_error() falsely triggers. Initialize sbi->s_bdev_wb_err unconditionally to avoid this problem. Fixes: bc71726c7257 ("ext4: abort the filesystem if failed to async write metadata buffer") Cc: stable@kernel.org Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200928020556.710971-1-zhangxiaoxu5@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: rename system_blks to s_system_blks inside ext4_sb_infoChunguang Xu3-9/+9
Rename system_blks to s_system_blks inside ext4_sb_info, keep the naming rules consistent with other variables, which is convenient for code reading and writing. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/1600916623-544-2-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: rename journal_dev to s_journal_dev inside ext4_sb_infoChunguang Xu3-12/+12
Rename journal_dev to s_journal_dev inside ext4_sb_info, keep the naming rules consistent with other variables, which is convenient for code reading and writing. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/1600916623-544-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: add trace exit in exception path.Zhang Qilong2-2/+3
Missing trace exit in exception path of ext4_sync_file and ext4_ind_map_blocks. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20200921124738.23352-1-zhangqilong3@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: optimize file overwritesRitesh Harjani1-3/+15
In case if the file already has underlying blocks/extents allocated then we don't need to start a journal txn and can directly return the underlying mapping. Currently ext4_iomap_begin() is used by both DAX & DIO path. We can check if the write request is an overwrite & then directly return the mapping information. This could give a significant perf boost for multi-threaded writes specially random overwrites. On PPC64 VM with simulated pmem(DAX) device, ~10x perf improvement could be seen in random writes (overwrite). Also bcoz this optimizes away the spinlock contention during jbd2 slab cache allocation (jbd2_journal_handle). On x86 VM, ~2x perf improvement was observed. Reported-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/88e795d8a4d5cd22165c7ebe857ba91d68d8813e.1600401668.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: remove unused including <linux/version.h>Tian Tao1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1600397165-42873-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: fix superblock checksum calculation raceConstantine Sapuntzakis1-0/+11
The race condition could cause the persisted superblock checksum to not match the contents of the superblock, causing the superblock to be considered corrupt. An example of the race follows. A first thread is interrupted in the middle of a checksum calculation. Then, another thread changes the superblock, calculates a new checksum, and sets it. Then, the first thread resumes and sets the checksum based on the older superblock. To fix, serialize the superblock checksum calculation using the buffer header lock. While a spinlock is sufficient, the buffer header is already there and there is precedent for locking it (e.g. in ext4_commit_super). Tested the patch by booting up a kernel with the patch, creating a filesystem and some files (including some orphans), and then unmounting and remounting the file system. Cc: stable@kernel.org Signed-off-by: Constantine Sapuntzakis <costa@purestorage.com> Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200914161014.22275-1-costa@purestorage.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: fix error handling code in add_new_gdbDinghao Liu1-1/+3
When ext4_journal_get_write_access() fails, we should terminate the execution flow and release n_group_desc, iloc.bh, dind and gdb_bh. Cc: stable@kernel.org Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200829025403.3139-1-dinghao.liu@zju.edu.cn Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: disallow modifying DAX inode flag if inline_data has been setXiao Yang1-1/+1
inline_data is mutually exclusive to DAX so enabling both of them triggers the following issue: ------------------------------------------ # mkfs.ext4 -F -O inline_data /dev/pmem1 ... # mount /dev/pmem1 /mnt # echo 'test' >/mnt/file # lsattr -l /mnt/file /mnt/file Inline_Data # xfs_io -c "chattr +x" /mnt/file # xfs_io -c "lsattr -v" /mnt/file [dax] /mnt/file # umount /mnt # mount /dev/pmem1 /mnt # cat /mnt/file cat: /mnt/file: Numerical result out of range ------------------------------------------ Fixes: b383a73f2b83 ("fs/ext4: Introduce DAX inode flag") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200828084330.15776-1-yangx.jy@cn.fujitsu.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: remove unused argument from ext4_(inc|dec)_countNikolay Borisov1-10/+10
The 'handle' argument is not used for anything so simply remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200826133116.11592-1-nborisov@suse.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: do not interpret high bytes if 64bit feature is disabledPetr Malat1-6/+8
Fields s_free_blocks_count_hi, s_r_blocks_count_hi and s_blocks_count_hi are not valid if EXT4_FEATURE_INCOMPAT_64BIT is not enabled and should be treated as zeroes. Signed-off-by: Petr Malat <oss@malat.biz> Link: https://lore.kernel.org/r/20200825150016.3363-1-oss@malat.biz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: delete duplicated words + other fixesRandy Dunlap5-6/+6
Delete repeated words in fs/ext4/. {the, this, of, we, after} Also change spelling of "xttr" in inline.c to "xattr" in 2 places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18ext4: flag as supporting buffered async readsJens Axboe1-1/+1
ext4 uses generic_file_read_iter(), which already supports this. Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/fb90cc2d-b12c-738f-21a4-dd7a8ae0556a@kernel.dk Signed-off-by: Theodore Ts'o <tytso@mit.edu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 18:10:56 +0000