summaryrefslogtreecommitdiffstats
path: root/fs/ext4/ext4_jbd2.c
AgeCommit message (Collapse)AuthorFilesLines
2010-07-27ext4: Save error information to the superblock for analysisTheodore Ts'o1-0/+5
Save number of file system errors, and the time function name, line number, block number, and inode number of the first and most recent errors reported on the file system in the superblock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Pass line numbers to ext4_error() and friendsTheodore Ts'o1-7/+5
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: Pass line number to ext4_journal_abort_handle()Theodore Ts'o1-23/+25
This allows the error messages to include the line number Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: clean up ext4_abort() so __func__ is now implicitTheodore Ts'o1-2/+2
Use a macro definition for ext4_abort() to clean up the .c files a wee bit. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-11ext4: Clean up s_dirt handlingTheodore Ts'o1-0/+16
We don't need to set s_dirt in most of the ext4 code when journaling is enabled. In ext3/4 some of the summary statistics for # of free inodes, blocks, and directories are calculated from the per-block group statistics when the file system is mounted or unmounted. As a result the superblock doesn't have to be updated, either via the journal or by setting s_dirt. There are a few exceptions, most notably when resizing the file system, where the superblock needs to be modified --- and in that case it should be done as a journalled operation if possible, and s_dirt set only in no-journal mode. This patch will optimize out some unneeded disk writes when using ext4 with a journal. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-16ext4: Fix BUG_ON at fs/buffer.c:652 in no journal modeCurt Wohlgemuth1-1/+1
Calls to ext4_handle_dirty_metadata should only pass in an inode pointer for inode-specific metadata, and not for shared metadata blocks such as inode table blocks, block group descriptors, the superblock, etc. The BUG_ON can get tripped when updating a special device (such as a block device) that is opened (so that i_mapping is set in fs/block_dev.c) and the file system is mounted in no journal mode. Addresses-Google-Bug: #2404870 Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-15ext4: move __func__ into a macro for ext4_warning, ext4_errorEric Sandeen1-1/+1
Just a pet peeve of mine; we had a mishash of calls with either __func__ or "function_name" and the latter tends to get out of sync. I think it's easier to just hide the __func__ in a macro, and it'll be consistent from then on. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-22ext4: fold ext4_journal_forget() into ext4_forget()Theodore Ts'o1-17/+5
Convert the last two callers of ext4_journal_forget() to use ext4_forget() instead, and then fold ext4_journal_forget() into ext4_forget(). This reduces are code complexity and shortens our call stack. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-24ext4: fold ext4_journal_revoke() into ext4_forget()Theodore Ts'o1-19/+11
The only caller of ext4_journal_revoke() is ext4_forget(), so we can fold ext4_journal_revoke() into ext4_forget() to simplify the code and shorten the call stack. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-22ext4: move ext4_forget() to ext4_jbd2.cTheodore Ts'o1-0/+56
The ext4_forget() function better belongs in ext4_jbd2.c. This will allow us to do some cleanup of the ext4_journal_revoke() and ext4_journal_forget() functions, as well as giving us better error reporting since we can report the caller of ext4_forget() when things go wrong. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-12ext4: Assure that metadata blocks are written during fsync in no journal modeTheodore Ts'o1-1/+4
When there is no journal present, we must attach buffer heads associated with extent tree and indirect blocks to the inode's mapping->private_list via mark_buffer_dirty_inode() so that ext4_sync_file() --- which is called to service fsync() and fdatasync() system calls --- can write out the inode's metadata blocks by calling sync_mapping_buffers(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-09ext4: Use bforget() in no journal mode for ext4_journal_{forget,revoke}()Theodore Ts'o1-2/+2
When ext4 is using a journal, a metadata block which is deallocated must be passed into the journal layer so it can be dropped from the current transaction and/or revoked. This is done by calling the functions ext4_journal_forget() and ext4_journal_revoke(), which call jbd2_journal_forget(), and jbd2_journal_revoke(), respectively. Since the jbd2_journal_forget() and jbd2_journal_revoke() call bforget(), if ext4 is not using a journal, ext4_journal_forget() and ext4_journal_revoke() must call bforget() to avoid a dirty metadata block overwriting a block after it has been reallocated and reused for another inode's data block. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-13ext4: Fix buffer head reference leak in no-journal modeCurt Wohlgemuth1-0/+4
We found a problem with buffer head reference leaks when using an ext4 partition without a journal. In particular, calls to ext4_forget() would not to a brelse() on the input buffer head, which will cause pages they belong to to not be reclaimable. Further investigation showed that all places where ext4_journal_forget() and ext4_journal_revoke() are called are subject to the same problem. The patch below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit release of the buffer head when the journal handle isn't valid. Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-07ext4: Allow ext4 to run without a journalFrank Mayhar1-20/+63
A few weeks ago I posted a patch for discussion that allowed ext4 to run without a journal. Since that time I've integrated the excellent comments from Andreas and fixed several serious bugs. We're currently running with this patch and generating some performance numbers against both ext2 (with backported reservations code) and ext4 with and without a journal. It just so happens that running without a journal is slightly faster for most everything. We did iozone -T -t 4 s 2g -r 256k -T -I -i0 -i1 -i2 which creates 4 threads, each of which create and do reads and writes on a 2G file, with a buffer size of 256K, using O_DIRECT for all file opens to bypass the page cache. Results: ext2 ext4, default ext4, no journal initial writes 13.0 MB/s 15.4 MB/s 15.7 MB/s rewrites 13.1 MB/s 15.6 MB/s 15.9 MB/s reads 15.2 MB/s 16.9 MB/s 17.2 MB/s re-reads 15.3 MB/s 16.9 MB/s 17.2 MB/s random readers 5.6 MB/s 5.6 MB/s 5.7 MB/s random writers 5.1 MB/s 5.3 MB/s 5.4 MB/s So it seems that, so far, this was a useful exercise. Signed-off-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: move headers out of include/linuxChristoph Hellwig1-1/+1
Move ext4 headers out of include/linux. This is just the trivial move, there's some more thing that could be done later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-6/+6
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2006-12-07[PATCH] ext4: uninline large functionsAndrew Morton1-0/+59
Saves nearly 4kbytes on x86. Cc: Arnaldo Carvalho de Melo <acme@mandriva.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>