| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the short element i_delalloc_reserved_flag from the
ext4_inode_info structure and replace it a new bit in i_state_flags.
Since we have an ext4_inode_info for every ext4 inode cached in the
inode cache, any savings we can produce here is a very good thing from
a memory utilization perspective.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Fix a namespace leak from fs/ext4
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
These functions have no need to be exported beyond file context.
No functions needed to be moved for this commit; just some function
declarations changed to be static and removed from header files.
(A similar patch was submitted by Eric Sandeen, but I wanted to handle
code movement in separate patches to make sure code changes didn't
accidentally get dropped.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We don't need to set s_dirt in most of the ext4 code when journaling
is enabled. In ext3/4 some of the summary statistics for # of free
inodes, blocks, and directories are calculated from the per-block
group statistics when the file system is mounted or unmounted. As a
result the superblock doesn't have to be updated, either via the
journal or by setting s_dirt. There are a few exceptions, most
notably when resizing the file system, where the superblock needs to
be modified --- and in that case it should be done as a journalled
operation if possible, and s_dirt set only in no-journal mode.
This patch will optimize out some unneeded disk writes when using ext4
with a journal.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Because we can badly over-reserve metadata when we
calculate worst-case, it complicates things for quota, since
we must reserve and then claim later, retry on EDQUOT, etc.
Quota is also a generally smaller pool than fs free blocks,
so this over-reservation hurts more, and more often.
I'm of the opinion that it's not the worst thing to allow
metadata to push a user slightly over quota. This simplifies
the code and avoids the false quota rejections that result
from worst-case speculation.
This patch stops the speculative quota-charging for
worst-case metadata requirements, and just charges quota
when the blocks are allocated at writeout. It also is
able to remove the try-again loop on EDQUOT.
This patch has been tested indirectly by running the xfstests
suite with a hack to mount & enable quota prior to the test.
I also did a more specific test of fragmenting freespace
and then doing a large delalloc write under quota; quota
stopped me at the right amount of file IO, and then the
writeout generated enough metadata (due to the fragmentation)
that it put me slightly over quota, as expected.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
There are duplicate macro definitions of in_range() in mballoc.h and
balloc.c. This consolidates these two definitions into ext4.h, and
changes extents.c to use in_range() as well.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
|
|
This is a cleanup and simplification patch which takes some open-coded
calculations to calculate the first block number of a group and
converts them to use the (already defined) ext4_group_first_block_no()
function.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
|
|
Just a pet peeve of mine; we had a mishash of calls with either __func__
or "function_name" and the latter tends to get out of sync.
I think it's easier to just hide the __func__ in a macro, and it'll
be consistent from then on.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
ext4_mb_free_blocks() is only called by ext4_free_blocks(), and the
latter function doesn't really do much. So merge the two functions
together, such that ext4_free_blocks() is now found in
fs/ext4/mballoc.c. This saves about 200 bytes of compiled text space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The number of old-style block group descriptor blocks is
s_meta_first_bg when the meta_bg feature flag is set.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
|
|
ext4_mb_update_group_info is only called in one place, and it's
extremely simple. There's no reason to have it in a separate function
in a separate file as far as I can tell, it just obfuscates what's
really going on.
Perhaps it was intended to keep the grp->bb_* manipulation local to
mballoc.c but we're already accessing other grp-> fields in balloc.c
directly so this seems ok.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We have sb_bgl_lock() and ext4_group_info.bb_state
bit spinlock to protech group information. The later is only
used within mballoc code. Consolidate them to use sb_bgl_lock().
This makes the mballoc.c code much simpler and also avoid
confusion with two locks protecting same info.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Move the function prototypes in group.h into ext4.h so they are all
defined in one place.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Ext4's on-line resizing adds a new block group and then, only at the
last step adjusts s_groups_count. However, it's possible on SMP
systems that another CPU could see the updated the s_group_count and
not see the newly initialized data structures for the just-added block
group. For this reason, it's important to insert a SMP read barrier
after reading s_groups_count and before reading any (for example) the
new block group descriptors allowed by the increased value of
s_groups_count.
Unfortunately, we rather blatently violate this locking protocol
documented in fs/ext4/resize.c. Fortunately, (1) on-line resizes
happen relatively rarely, and (2) it seems rare that the filesystem
code will immediately try to use just-added block group before any
memory ordering issues resolve themselves. So apparently problems
here are relatively hard to hit, since ext3 has been vulnerable to the
same issue for years with no one apparently complaining.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Reduce pressure on the sb_bgl_lock family of locks by using atomic_t's
to track the number of free blocks and inodes in each flex_group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The static function ext4_group_used_meta_blocks() only has one caller,
who already has access to the block group's group descriptor. So it's
better to have ext4_init_block_bitmap() pass the group descriptor to
ext4_group_used_meta_blocks(), so it doesn't need to call
ext4_group_desc(). Previously this function did not check if
ext4_group_desc() returned NULL due to an error, potentially causing a
kernel OOPS report. This avoids the issue entirely.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Use lowercase names of quota functions instead of old uppercase ones.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mingming Cao <cmm@us.ibm.com>
CC: linux-ext4@vger.kernel.org
|
|
Running without a journal, I oopsed when I ran out of space,
because we called jbd2_journal_force_commit_nested() from
ext4_should_retry_alloc() without a journal.
This should take care of it, I think.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
When bg_free_blocks_count was renamed to bg_free_blocks_count_lo in
560671a0, its uses under EXT4FS_DEBUG were not changed to the helper
ext4_free_blks_count.
Another commit, 498e5f24, also did not change everything needed under
EXT4FS_DEBUG, thus making it spill some warnings related to printing
format.
This commit fixes both issues and makes ext4 build again when
EXT4FS_DEBUG is enabled.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
For uninit block group, the on-disk bitmap is not initialized. That
implies we cannot depend on the uptodate flag on the bitmap
buffer_head to find bitmap validity. Use a new buffer_head flag which
would be set after we properly initialize the bitmap. This also
prevents (re-)initializing the uninit group bitmap every time we call
ext4_read_block_bitmap().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Rename some variables. We also unlock locks in the reverse order we
acquired as a part of cleanup.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Rename the lower bits with suffix _lo and add helper
to access the values. Also rename bg_itable_unused_hi
to bg_pad as in e2fsprogs.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The new groups added during resize are flagged as
need_init group. Make sure we properly initialize these
groups. When we have block size < page size and we are adding
new groups the page may still be marked uptodate even though
we haven't initialized the group. While forcing the init
of buddy cache we need to make sure other groups part of the
same page of buddy cache is not using the cache.
group_info->alloc_sem is added to ensure the same.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: stable@kernel.org
|
|
With this change new blocks added during resize
are marked as free in the block bitmap and the
group is flagged with EXT4_GROUP_INFO_NEED_INIT_BIT
flag. This makes sure when mballoc tries to allocate
blocks from the new group we would reload the
buddy information using the bitmap present in the disk.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Convert the unsigned longs that are most responsible for bloating the
stack usage on 64-bit systems.
Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This removes annoying blank syslog entries emitted by ext4_error() or
ext4_warning(), since these functions add their own newline.
Signed-off-by: Nick Warne <nick@ukfsn.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
A few weeks ago I posted a patch for discussion that allowed ext4 to run
without a journal. Since that time I've integrated the excellent
comments from Andreas and fixed several serious bugs. We're currently
running with this patch and generating some performance numbers against
both ext2 (with backported reservations code) and ext4 with and without
a journal. It just so happens that running without a journal is
slightly faster for most everything.
We did
iozone -T -t 4 s 2g -r 256k -T -I -i0 -i1 -i2
which creates 4 threads, each of which create and do reads and writes on
a 2G file, with a buffer size of 256K, using O_DIRECT for all file opens
to bypass the page cache. Results:
ext2 ext4, default ext4, no journal
initial writes 13.0 MB/s 15.4 MB/s 15.7 MB/s
rewrites 13.1 MB/s 15.6 MB/s 15.9 MB/s
reads 15.2 MB/s 16.9 MB/s 17.2 MB/s
re-reads 15.3 MB/s 16.9 MB/s 17.2 MB/s
random readers 5.6 MB/s 5.6 MB/s 5.7 MB/s
random writers 5.1 MB/s 5.3 MB/s 5.4 MB/s
So it seems that, so far, this was a useful exercise.
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The convenience function do_blk_alloc() is a static function with only
one caller, so fold it into ext4_new_meta_blocks() to simplify the
code and to make it easier to understand.
To save more stack space, if count is a null pointer in
ext4_new_meta_blocks() assume that caller wanted a single block (and
if there is an error, no blocks were allocated).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
There were only two one callers of the function ext4_new_meta_block(),
which just a very simpler wrapper function around
ext4_new_meta_blocks(). Change those two functions to call
ext4_new_meta_blocks() directly, to save code and stack space usage.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
There was only one caller of the compatibility function
ext4_new_blocks(), in balloc.c's ext4_alloc_blocks(). Change it to
call ext4_mb_new_blocks() directly, and remove ext4_new_blocks()
altogether. This cleans up the code, by removing two extra functions
from the call chain, and hopefully saving some stack usage.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
fs/ext4/balloc.c:607: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64'
fs/ext4/inode.c:1822: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64'
fs/ext4/inode.c:1824: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
|
|
Revert
commit e8ced39d5e8911c662d4d69a342b9d053eaaac4e
Author: Mingming Cao <cmm@us.ibm.com>
Date: Fri Jul 11 19:27:31 2008 -0400
percpu_counter: new function percpu_counter_sum_and_set
As described in
revert "percpu counter: clean up percpu_counter_sum_and_set()"
the new percpu_counter_sum_and_set() is racy against updates to the
cpu-local accumulators on other CPUs. Revert that change.
This means that ext4 will be slow again. But correct.
Reported-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert
commit 1f7c14c62ce63805f9574664a6c6de3633d4a354
Author: Mingming Cao <cmm@us.ibm.com>
Date: Thu Oct 9 12:50:59 2008 -0400
percpu counter: clean up percpu_counter_sum_and_set()
Before this patch we had the following:
percpu_counter_sum(): return the percpu_counter's value
percpu_counter_sum_and_set(): return the percpu_counter's value, copying
that value into the central value and zeroing the per-cpu counters before
returning.
After this patch, percpu_counter_sum_and_set() has gone, and
percpu_counter_sum() gets the old percpu_counter_sum_and_set()
functionality.
Problem is, as Eric points out, the old percpu_counter_sum_and_set()
functionality was racy and wrong. It zeroes out counters on "other" cpus,
without holding any locks which will prevent races agaist updates from
those other CPUS.
This patch reverts 1f7c14c62ce63805f9574664a6c6de3633d4a354. This means
that percpu_counter_sum_and_set() still has the race, but
percpu_counter_sum() does not.
Note that this is not a simple revert - ext4 has since started using
percpu_counter_sum() for its dirty_blocks counter as well.
Note that this revert patch changes percpu_counter_sum() semantics.
Before the patch, a call to percpu_counter_sum() will bring the counter's
central counter mostly up-to-date, so a following percpu_counter_read()
will return a close value.
After this patch, a call to percpu_counter_sum() will leave the counter's
central accumulator unaltered, so a subsequent call to
percpu_counter_read() can now return a significantly inaccurate result.
If there is any code in the tree which was introduced after
e8ced39d5e8911c662d4d69a342b9d053eaaac4e was merged, and which depends
upon the new percpu_counter_sum() semantics, that code will break.
Reported-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: adilger@sun.com
Cc: linux-ext4@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
|
|
As reported by Eric Paris, the capable() check in ext4_has_free_blocks()
sometimes causes SELinux denials.
We can rearrange the logic so that we only try to use the root-reserved
blocks when necessary, and even then we can move the capable() test
to last, to avoid the check most of the time.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Mingming pointed out that ext4_claim_free_blocks & ext4_has_free_blocks
are largely cut & pasted; they can be collapsed/merged as follows.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We need to make sure we don't reuse the data blocks released
during the transaction untill the transaction commits. We force
this mode only for ordered and journalled mode. Writeback mode
already don't provided data consistency.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This fixes a bug which caused on-line resizing of filesystems with a
1k blocksize to fail. The root cause of this bug was the fact that if
an uninitalized bitmap block gets read in by userspace (which
e2fsprogs does try to avoid, but can happen when the blocksize is less
than the pagesize and an adjacent blocks is read into memory)
ext4_read_block_bitmap() was erroneously depending on the buffer
uptodate flag to decide whether it needed to initialize the bitmap
block in memory --- i.e., to set the standard set of blocks in use by
a block group (superblock, bitmaps, inode table, etc.). Essentially,
ext4_read_block_bitmap() assumed it was the only routine that might
try to read a block containing a block bitmap, which is simply not
true.
To fix this, ext4_read_block_bitmap() and ext4_read_inode_bitmap()
must always initialize uninitialized bitmap blocks. Once a block or
inode is allocated out of that bitmap, it will be marked as
initialized in the block group descriptor, so in general this won't
result any extra unnecessary work.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Make sure we don't add the inode to the journal handle until after the
block allocation, so that a journal commit will not include the inode in
case of block allocation failure.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We run into ENOSPC error on nonmballoc ext4, even when there is free blocks
on the filesystem.
The patch includes two changes:
a) Set reservation to NULL if we trying to allocate near group_target_block
from the goal group if the free block in the group is less than windows.
This should give us a better chance to allocate near group_target_block.
This also ensures that if we are not allocating near group_target_block
then we don't trun off reservation. This should enable us to allocate
with reservation from other groups that have large free blocks count.
b) we don't need to check the window size if the block reservation is off.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This patch converts some usage of ext4_fsblk_t to s64. This is needed
so that some of the sign conversion works as expected in if loops.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This patch adds dirty block accounting using percpu_counters. Delayed
allocation block reservation is now done by updating dirty block
counter. In a later patch we switch to non delalloc mode if the
filesystem free blocks is greater than 150% of total filesystem dirty
blocks
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
During block reservation if we don't have enough blocks left, retry
block reservation with smaller block counts. This makes sure we try
fallocate and DIO with smaller request size and don't fail early. The
delayed allocation reservation cannot try with smaller block count. So
retry block reservation to handle temporary disk full conditions. Also
print free blocks details if we fail block allocation during writepages.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
With delayed allocation we need to make sure block are reserved before
we attempt to allocate them. Otherwise we get block allocation failure
(ENOSPC) during writepages which cannot be handled. This would mean
silent data loss (We do a printk stating data will be lost). This patch
updates the DIO and fallocate code path to do block reservation before
block allocation. This is needed to make sure parallel DIO and fallocate
request doesn't take block out of delayed reserve space.
When free blocks count go below a threshold we switch to a slow patch
which looks at other CPU's accumulated percpu counter values.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
percpu_counter_sum_and_set() and percpu_counter_sum() is the same except
the former updates the global counter after accounting. Since we are
taking the fbc->lock to calculate the precise value of the counter in
percpu_counter_sum() anyway, it should simply set fbc->count too, as the
percpu_counter_sum_and_set() does.
This patch merges these two interfaces into one.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
