summaryrefslogtreecommitdiffstats
path: root/fs/ext2/ext2.h
AgeCommit message (Collapse)AuthorFilesLines
2019-11-06ext2: introduce new helper ext2_group_last_block_no()Chengguang Xu1-0/+12
Introduce new helper ext2_group_last_block_no() to calculate last block num for specific block group, we can replace open coded logic by calling this common helper. Link: https://lore.kernel.org/r/20191104114036.9893-1-cgxu519@mykernel.net Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Jan Kara <jack@suse.cz>
2019-03-07Merge tag 'fs_for_v5.1-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2 and udf fixes from Jan Kara: "A couple of fixes for udf and ext2. Namely: - fix making ext2 mountable (again) with 64k blocksize - fix for ext2 statx(2) handling - fix for udf handling of corrupted filesystem so that it doesn't get corrupted even further - couple smaller ext2 and udf cleanups" * tag 'fs_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Drop pointless check from udf_sync_fs() ext2: support statx syscall udf: disallow RW mount without valid integrity descriptor udf: finalize integrity descriptor before writeback udf: factor out LVID finalization for reuse ext2: Fix underflow in ext2_max_size() ext2: Fix a typo in comment ext2: Remove redundant check for finding no group ext2: Annotate implicit fall through in __ext2_truncate_blocks ext2: Set superblock revision when enabling xattr feature ext2: Remove redundant check on s_inode_size ext2: set proper return code
2019-02-18ext2: support statx syscallyangerkun1-0/+1
Since statx, every filesystem should fill the attributes/attributes_mask in routine getattr. But the generic_fillattr has not fill that, so add ext2_getattr to do this. This can fix generic/424 while testing ext2. Reviewed-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-01-21ext2: use common file type conversionPhillip Potter1-16/+0
Deduplicate the ext2 file type conversion implementation and remove EXT2_FT_* definitions - file systems that use the same file types as defined by POSIX do not need to define their own versions and can use the common helper functions decared in fs_types.h and implemented in fs_types.c Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2018-09-24ext2: remove redundant building macro checkChengguang Xu1-4/+0
If macro CONFIG_QUOTA is not enabled then mount option flag of usrquota/grpquota will not be set, so we can remove some building macro check safely in ext2_shwo_options(). Additionally, I think it's better to define EXT2_MOUNT_DAX regardless macro CONFIG_FS_DAX is enabled just like acl/xattr. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20ext2: add warning when specifying nocheck optionChengguang Xu1-2/+0
The option nocheck(nocheck/check=none) is useless but considering backwards compatibility it's better to print warning for a while before completely remove from the code. This patch add proper warning message for option 'nocheck' and remove unnecessary comment/function declaration which is used for removed option 'check'. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-03ext2, dax: introduce ext2_dax_aopsDan Williams1-0/+1
In preparation for the dax implementation to start associating dax pages to inodes via page->mapping, we need to provide a 'struct address_space_operations' instance for dax. Otherwise, direct-I/O triggers incorrect page cache assumptions and warnings. Reviewed-by: Jan Kara <jack@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31ext2: perform dax_device lookup at mountDan Williams1-0/+1
The ->iomap_begin() operation is a hot path, so cache the fs_dax_get_by_host() result at mount time to avoid the incurring the hash lookup overhead on a per-i/o basis. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-22ext2, ext4: make mb block cache names more explicitTahsin Erdogan1-1/+1
There will be a second mb_cache instance that tracks ea_inodes. Make existing names more explicit so that it is clear that they refer to xattr block cache. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-04-19ext2: Remove ext2_get_inode_flags()Jan Kara1-1/+0
Now that all places setting inode->i_flags that should be reflected in on-disk flags are gone, we can remove ext2_get_inode_flags() call. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-05ext2: Call dquot_writeback_dquots() with s_umount heldJan Kara1-1/+2
ext2_sync_fs() could be called without s_umount semaphore held when called through ext2_write_super() from __ext2_write_inode(). This function then calls dquot_writeback_dquots() which relies on s_umount to be held for protection against other quota operations. In fact __ext2_write_inode() does not need all the functionality ext2_write_super() provides. It is enough to just write the superblock. So use ext2_sync_super() instead. Fixes: 9d1ccbe70e0b14545caad12dc73adb3605447df0 Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-30iomap: constify struct iomap_opsChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2016-09-19ext2: use iomap to implement DAXChristoph Hellwig1-0/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-06Merge branch 'work.const-qstr' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security
2016-07-30qstr: constify instances in ext2Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-05ext2: fix filesystem deadlock while reading corrupted xattr blockCarlos Maiolino1-0/+3
This bug can be reproducible with fsfuzzer, although, I couldn't reproduce it 100% of my tries, it is quite easily reproducible. During the deletion of an inode, ext2_xattr_delete_inode() does not check if the block pointed by EXT2_I(inode)->i_file_acl is a valid data block, this might lead to a deadlock, when i_file_acl == 1, and the filesystem block size is 1024. In that situation, ext2_xattr_delete_inode, will load the superblock's buffer head (instead of a valid i_file_acl block), and then lock that buffer head, which, ext2_sync_super will also try to lock, making the filesystem deadlock in the following stack trace: root 17180 0.0 0.0 113660 660 pts/0 D+ 07:08 0:00 rmdir /media/test/dir1 [<ffffffff8125da9f>] __sync_dirty_buffer+0xaf/0x100 [<ffffffff8125db03>] sync_dirty_buffer+0x13/0x20 [<ffffffffa03f0d57>] ext2_sync_super+0xb7/0xc0 [ext2] [<ffffffffa03f10b9>] ext2_error+0x119/0x130 [ext2] [<ffffffffa03e9d93>] ext2_free_blocks+0x83/0x350 [ext2] [<ffffffffa03f3d03>] ext2_xattr_delete_inode+0x173/0x190 [ext2] [<ffffffffa03ee9e9>] ext2_evict_inode+0xc9/0x130 [ext2] [<ffffffff8123fd23>] evict+0xb3/0x180 [<ffffffff81240008>] iput+0x1b8/0x240 [<ffffffff8123c4ac>] d_delete+0x11c/0x150 [<ffffffff8122fa7e>] vfs_rmdir+0xfe/0x120 [<ffffffff812340ee>] do_rmdir+0x17e/0x1f0 [<ffffffff81234dd6>] SyS_rmdir+0x16/0x20 [<ffffffff81838cf2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [<ffffffffffffffff>] 0xffffffffffffffff Fix this by using the same approach ext4 uses to test data blocks validity, implementing ext2_data_block_valid. An another possibility when the superblock is very corrupted, is that i_file_acl is 1, block_count is 1 and first_data_block is 0. For such situations, we might have i_file_acl pointing to a 'valid' block, but still step over the superblock. The approach I used was to also test if the superblock is not in the range described by ext2_data_block_valid() arguments Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22mbcache2: rename to mbcacheJan Kara1-2/+2
Since old mbcache code is gone, let's rename new code to mbcache since number 2 is now meaningless. This is just a mechanical replacement. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22ext2: convert to mbcache2Jan Kara1-0/+3
The conversion is generally straightforward. We convert filesystem from a global cache to per-fs one. Similarly to ext4 the tricky part is that xattr block corresponding to found mbcache entry can get freed before we get buffer lock for that block. So we have to check whether the entry is still valid after getting the buffer lock. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-19ext2: Add locking for DAX faultsRoss Zwisler1-0/+11
Add locking to ensure that DAX faults are isolated from ext2 operations that modify the data blocks allocation for an inode. This is intended to be analogous to the work being done in XFS by Dave Chinner: http://www.spinics.net/lists/linux-fsdevel/msg90260.html Compared with XFS the ext2 case is greatly simplified by the fact that ext2 already allocates and zeros new blocks before they are returned as part of ext2_get_block(), so DAX doesn't need to worry about getting unmapped or unwritten buffer heads. This means that the only work we need to do in ext2 is to isolate the DAX faults from inode block allocation changes. I believe this just means that we need to isolate the DAX faults from truncate operations. The newly introduced dax_sem is intended to replicate the protection offered by i_mmaplock in XFS. In addition to truncate the i_mmaplock also protects XFS operations like hole punching, fallocate down, extent manipulation IOCTLS like xfs_ioc_space() and extent swapping. Truncate is the only one of these operations supported by ext2. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.com>
2015-04-15dax: unify ext2/4_{dax,}_file_operationsBoaz Harrosh1-1/+0
The original dax patchset split the ext2/4_file_operations because of the two NULL splice_read/splice_write in the dax case. In the vfs if splice_read/splice_write are NULL we then call default_splice_read/write. What we do here is make generic_file_splice_read aware of IS_DAX() so the original ext2/4_file_operations can be used as is. For write it appears that iter_file_splice_write is just fine. It uses the regular f_op->write(file,..) or new_sync_write(file, ...). Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <dchinner@redhat.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16ext2: get rid of most mentions of XIP in ext2Matthew Wilcox1-6/+7
To help people transition, accept the 'xip' mount option (and report it in /proc/mounts), but print a message encouraging people to switch over to the 'dax' option. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16ext2: remove ext2_aops_xipMatthew Wilcox1-1/+0
We shouldn't need a special address_space_operations any more Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16vfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAXMatthew Wilcox1-1/+1
The fewer Kconfig options we have the better. Use the generic CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16ext2: remove ext2_use_xipMatthew Wilcox1-0/+4
Replace ext2_use_xip() with test_opt(XIP) which expands to the same code Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-10ext2: Convert to private i_dquot fieldJan Kara1-0/+3
CC: linux-ext4@vger.kernel.org Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-15userns: Convert ext2 to use kuid/kgid where appropriate.Eric W. Biederman1-4/+4
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-03-31migrate ext2_fs.h guts to fs/ext2/ext2.hAl Viro1-0/+631
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03ext2: propagate umode_tAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-10-31treewide: use __printf not __attribute__((format(printf,...)))Joe Perches1-4/+4
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-20fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlersJosef Bacik1-1/+2
Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-23bitops: remove ext2 non-atomic bitops from asm/bitops.hAkinobu Mita1-0/+6
As the result of conversions, there are no users of ext2 non-atomic bit operations except for ext2 filesystem itself. Now we can put them into architecture independent code in ext2 filesystem, and remove from asm/bitops.h for all architectures. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-01fs/vfs/security: pass last path component to LSM on inode creationEric Paris1-1/+1
SELinux would like to implement a new labeling behavior of newly created inodes. We currently label new inodes based on the parent and the creating process. This new behavior would also take into account the name of the new object when deciding the new label. This is not the (supposed) full path, just the last component of the path. This is very useful because creating /etc/shadow is different than creating /etc/passwd but the kernel hooks are unable to differentiate these operations. We currently require that userspace realize it is doing some difficult operation like that and than userspace jumps through SELinux hoops to get things set up correctly. This patch does not implement new behavior, that is obviously contained in a seperate SELinux patch, but it does pass the needed name down to the correct LSM hook. If no such name exists it is fine to pass NULL. Signed-off-by: Eric Paris <eparis@redhat.com>
2010-10-25fs: add sync_inode_metadataChristoph Hellwig1-1/+0
Add a new helper to write out the inode using the writeback code, that is including the correct dirty bit and list manipulation. A few of filesystems already opencode this, and a lot of others should be using it instead of using write_inode_now which also writes out the data. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09merge ext2 delete_inode and clear_inode, switch to ->evict_inode()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09clean up write_begin usage for directories in pagecacheChristoph Hellwig1-3/+0
For filesystem that implement directories in pagecache we call block_write_begin with an already allocated page for this code, while the normal regular file write path uses the default block_write_begin behaviour. Get rid of the __foofs_write_begin helper and opencode the normal write_begin call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for the directory code. The added benefit is that foofs_prepare_chunk has a much saner calling convention. Note that the interruptible flag passed into block_write_begin is always ignored if we already pass in a page (see next patch for details), and we never were doing truncations of exessive blocks for this case either so we can switch directly to block_write_begin_newtrunc. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27ext2: convert to use the new truncate convention.npiggin@suse.de1-1/+0
I also have commented a possible bug in existing ext2 code, marked with XXX. Cc: linux-ext4@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27drop unused dentry argument to ->fsyncChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-05pass writeback_control to ->write_inodeChristoph Hellwig1-1/+1
This gives the filesystem more information about the writeback that is happening. Trond requested this for the NFS unstable write handling, and other filesystems might benefit from this too by beeing able to distinguish between the different callers in more detail. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16ext2: report metadata errors during fsyncJan Kara1-0/+1
When an IO error happens while writing metadata buffers, we should better report it and call ext2_error since the filesystem is probably no longer consistent. Sometimes such IO errors happen while flushing thread does background writeback, the buffer gets later evicted from memory, and thus the only trace of the error remains as AS_EIO bit set in blockdevice's mapping. So we check this bit in ext2_fsync and report the error although we cannot be really sure which buffer we failed to write. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-10ext2: Unify log messages in ext2Alexey Fisher1-1/+1
make messages produced by ext2 more unified. It should be easy to parse. dmesg before patch: [ 4893.684892] reservations ON [ 4893.684896] xip option not supported [ 4893.684961] EXT2-fs warning: mounting ext3 filesystem as ext2 [ 4893.684964] EXT2-fs warning: maximal mount count reached, running e2fsck is recommended [ 4893.684990] EXT II FS: 0.5b, 95/08/09, bs=1024, fs=1024, gc=2, bpg=8192, ipg=1280, mo=80010] dmesg after patch: [ 4893.684892] EXT2-fs (loop0): reservations ON [ 4893.684896] EXT2-fs (loop0): xip option not supported [ 4893.684961] EXT2-fs (loop0): warning: mounting ext3 filesystem as ext2 [ 4893.684964] EXT2-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended [ 4893.684990] EXT2-fs (loop0): 0.5b, 95/08/09, bs=1024, fs=1024, gc=2, bpg=8192, ipg=1280, mo=80010] Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Reviewed-by: Andreas Dilger <adilger@sun.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-06-24switch ext2 to inode->i_aclAl Viro1-4/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-18ext2: Do not update mtime of a moved directoryJan Kara1-1/+1
One of our users is complaining that his backup tool is upset on ext2 (while it's happy on ext3, xfs, ...) because of the mtime change. The problem is: mkdir foo mkdir bar mkdir foo/a Now under ext2: mv foo/a foo/b changes mtime of 'foo/a' (foo/b after the move). That does not really make sense and it does not happen under any other filesystem I've seen. More complicated is: mv foo/a bar/a This changes mtime of foo/a (bar/a after the move) and it makes some sense since we had to update parent directory pointer of foo/a. But again, no other filesystem does this. So after some thoughts I'd vote for consistency and change ext2 to behave the same as other filesystems. Do not update mtime of a moved directory. Specs don't say anything about it (neither that it should, nor that it should not be updated) and other common filesystems (ext3, ext4, xfs, reiserfs, fat, ...) don't do it. So let's become more consistent. Spotted by ronny.pretzsch@dfs.de, initial fix by Jörn Engel. Reported-by: <ronny.pretzsch@dfs.de> Cc: <hare@suse.de> Cc: Jörn Engel <joern@logfs.org> Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12trivial: ext2: fix a typo in comment in ext2.hAli Gholami Rudi1-1/+1
Signed-off-by: Ali Gholami Rudi <ali@rudi.ir> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-11switch ext2 to simple_fsync()Al Viro1-3/+0
kill ext2_sync_file() (along with ext2/fsync.c), get rid of ext2_update_inode() - it's an alias of ext2_write_inode(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23[PATCH] get rid of on-stack dentry in ext2_get_parent()Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-03generic block based fiemap implementationJosef Bacik1-0/+2
Any block based fs (this patch includes ext3) just has to declare its own fiemap() function and then call this generic function with its own get_block_t. This works well for block based filesystems that will map multiple contiguous blocks at one time, but will work for filesystems that only map one block at a time, you will just end up with an "extent" for each block. One gotcha is this will not play nicely where there is hole+data after the EOF. This function will assume its hit the end of the data as soon as it hits a hole after the EOF, so if there is any data past that it will not pick that up. AFAIK no block based fs does this anyway, but its in the comments of the function anyway just in case. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org
2008-02-08ext2: remove unused ext2_put_inode prototypeChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07iget: stop EXT2 from using iget() and read_inode()David Howells1-1/+1
Stop the EXT2 filesystem from using iget() and read_inode(). Replace ext2_read_inode() with ext2_iget(), and call that instead of iget(). ext2_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. ext2_fill_super() returns any error incurred when getting the root inode instead of EINVAL. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06BKL-removal: convert ext2 over to use unlocked_ioctlAndi Kleen1-2/+1
I checked ext2_ioctl and could not find anything in there that would need the BKL. So convert it over to use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>