summaryrefslogtreecommitdiffstats
path: root/fs/exofs/inode.c
AgeCommit message (Collapse)AuthorFilesLines
2013-09-12truncate: drop 'oldsize' truncate_pagecache() parameterKirill A. Shutemov1-1/+1
truncate_pagecache() doesn't care about old size since commit cedabed49b39 ("vfs: Fix vmtruncate() regression"). Let's drop it. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-21mm: change invalidatepage prototype to accept lengthLukas Czerner1-2/+4
Currently there is no way to truncate partial page where the end truncate point is not at the end of the page. This is because it was not needed and the functionality was enough for file system truncate operation to work properly. However more file systems now support punch hole feature and it can benefit from mm supporting truncating page just up to the certain point. Specifically, with this functionality truncate_inode_pages_range() can be changed so it supports truncating partial page at the end of the range (currently it will BUG_ON() if 'end' is not at the end of the page). This commit changes the invalidatepage() address space operation prototype to accept range to be invalidated and update all the instances for it. We also change the block_invalidatepage() in the same way and actually make a use of the new length argument implementing range invalidation. Actual file system implementations will follow except the file systems where the changes are really simple and should not change the behaviour in any way .Implementation for truncate_page_range() which will be able to accept page unaligned ranges will follow as well. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com>
2012-12-14exofs: don't leak io_state and pages on read errorBoaz Harrosh1-5/+5
Same bug as fixed by Idan for write_exec was in read_exec. Fix the io_state leak and pages state on read error. Also while at it: The if (!pcol->read_4_write) at the error path is redundant because all goto err; are after the if (pcol->read_4_write) bale out. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-12-11exofs: clean up the correct page collection on write errorIdan Kedar1-2/+4
if ore_write() fails, we would unlock the pages of pcol, which is now empty, rather than pcol_copy which owns the pages when ore_write() is called. this means that no pages will actually be unlocked (pcol.nr_pages == 0) and the writing process (more accurately, the syncing process) will hang waiting for a writeback notification that never comes. moreover, if ore_write() fails, pcol_free() is called for pcol, whereas pcol_copy is the object owning the ore_io_state, thus leaking the ore_io_state. [Boaz] I have simplified Idan's original patch a bit, everything else still holds Signed-off-by: Idan Kedar <idank@tonian.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-09-21userns: Convert exofs to use kuid/kgid where appropriateEric W. Biederman1-4/+4
Cc: Benny Halevy <bhalevy@tonian.com> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-08-02exofs: Use proper max_IO calculations from oreBoaz Harrosh1-6/+4
exofs_max_io_pages should just use the ORE's calculated layout->max_io_length, And avoid unnecessary BUGs, calculations made here were also a layering violation. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-08-02exofs: Fix __r4w_get_page when offset is beyond i_sizeBoaz Harrosh1-3/+12
It is very common for the end of the file to be unaligned on stripe size. But since we know it's beyond file's end then the XOR should be preformed with all zeros. Old code used to just read zeros out of the OSD devices, which is a great waist. But what scares me more about this situation is that, we now have pages attached to the file's mapping that are beyond i_size. I don't like the kind of bugs this calls for. Fix both birds, by returning a global ZERO_PAGE, if offset is beyond i_size. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-08-02exofs: readpage_strip: Add a BUG_ON to check for PageLocked(page)Kautuk Consul1-0/+2
readpage_strip can be called from several code paths all of which require that the page be locked before any operations are carried out. Since we export the exofs_readpage callback to the VFS, add a BUG_ON to check for PageLocked(page) to make sure that this understanding is never compromised. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-05-06vfs: Rename end_writeback() to clear_inode()Jan Kara1-2/+2
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-01-03exofs: propagate umode_tAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-02filesystems: add set_nlink()Miklos Szeredi1-1/+1
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-24exofs: Support for RAID5 read-4-write interface.Boaz Harrosh1-2/+59
The ore need suplied a r4w_get_page/r4w_put_page API from Filesystem so it can get cache pages to read-into when writing parial stripes. Also I commented out and NULLed the .writepage (singular) vector. Because it gives terrible write pattern to raid and is apparently not needed. Even in OOM conditions the system copes (even better) with out it. TODO: How to specify to write_cache_pages() to start or include a certain page? Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore/exofs: Change ore_check_io APIBoaz Harrosh1-10/+4
Current ore_check_io API receives a residual pointer, to report partial IO. But it is actually not used, because in a multiple devices IO there is never a linearity in the IO failure. On the other hand if every failing device is reported through a received callback measures can be taken to handle only failed devices. One at a time. This will also be needed by the objects-layout-driver for it's error reporting facility. Exofs is not currently using the new information and keeps the old behaviour of failing the complete IO in case of an error. (No partial completion) TODO: Use an ore_check_io callback to set_page_error only the failing pages. And re-dirty write pages. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore/exofs: Define new ore_verify_layoutBoaz Harrosh1-7/+2
All users of the ore will need to check if current code supports the given layout. For example RAID5/6 is not currently supported. So move all the checks from exofs/super.c to a new ore_verify_layout() to be used by ore users. Note that any new layout should be passed through the ore_verify_layout() because the ore engine will prepare and verify some internal members of ore_layout, and assumes it's called. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14exofs: Support for short read/writesBoaz Harrosh1-9/+26
If at read/write_done the actual IO was shorter then requested, reported in returned ios->length. It is not an error. The reminder of the pages should just be unlocked but not marked uptodate or end_page_writeback. They will be re issued later by the VFS. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore: Only IO one group at a time (API change)Boaz Harrosh1-15/+85
Usually a single IO is confined to one group of devices (group_width) and at the boundary of a raid group it can spill into a second group. Current code would allocate a full device_table size array at each io_state so it can comply to requests that span two groups. Needless to say that is very wasteful, specially when device_table count can get very large (hundreds even thousands), while a group_width is usually 8 or 10. * Change ore API to trim on IO that spans two raid groups. The user passes offset+length to ore_get_rw_state, the ore might trim on that length if spanning a group boundary. The user must check ios->length or ios->nrpages to see how much IO will be preformed. It is the responsibility of the user to re-issue the reminder of the IO. * Modify exofs To copy spilled pages on to the next IO. This means one last kick is needed after all coalescing of pages is done. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-03exofs: Rename struct ore_components comps => ocBoaz Harrosh1-11/+11
ore_components already has a comps member so this leads to things like comps->comps which is annoying. the name oc was already used in new code. So rename all old usage of ore_components comps => ore_components oc. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Rename raid engine from exofs/ios.c => oreBoaz Harrosh1-44/+44
ORE stands for "Objects Raid Engine" This patch is a mechanical rename of everything that was in ios.c and its API declaration to an ore.c and an osd_ore.h header. The ore engine will later be used by the pnfs objects layout driver. * File ios.c => ore.c * Declaration of types and API are moved from exofs.h to a new osd_ore.h * All used types are prefixed by ore_ from their exofs_ name. * Shift includes from exofs.h to osd_ore.h so osd_ore.h is independent, include it from exofs.h. Other than a pure rename there are no other changes. Next patch will move the ore into it's own module and will export the API to be used by exofs and later the layout driver Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: ios: Move to a per inode components & device-tableBoaz Harrosh1-32/+27
Exofs raid engine was saving on memory space by having a single layout-info, single pid, and a single device-table, global to the filesystem. Then passing a credential and object_id info at the io_state level, private for each inode. It would also devise this contraption of rotating the device table view for each inode->ino to spread out the device usage. This is not compatible with the pnfs-objects standard, demanding that each inode can have it's own layout-info, device-table, and each object component it's own pid, oid and creds. So: Bring exofs raid engine to be usable for generic pnfs-objects use by: * Define an exofs_comp structure that holds obj_id and credential info. * Break up exofs_layout struct to an exofs_components structure that holds a possible array of exofs_comp and the array of devices + the size of the arrays. * Add a "comps" parameter to get_io_state() that specifies the ids creds and device array to use for each IO. This enables to keep the layout global, but the device-table view, creds and IDs at the inode level. It only adds two 64bit to each inode, since some of these members already existed in another form. * ios raid engine now access layout-info and comps-info through the passed pointers. Everything is pre-prepared by caller for generic access of these structures and arrays. At the exofs Level: * Super block holds an exofs_components struct that holds the device array, previously in layout. The devices there are in device-table order. The device-array is twice bigger and repeats the device-table twice so now each inode's device array can point to a random device and have a round-robin view of the table, making it compatible to previous exofs versions. * Each inode has an exofs_components struct that is initialized at load time, with it's own view of the device table IDs and creds. When doing IO this gets passed to the io_state together with the layout. While preforming this change. Bugs where found where credentials with the wrong IDs where used to access the different SB objects (super.c). As well as some dead code. It was never noticed because the target we use does not check the credentials. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Move exofs specific osd operations out of ios.cBoaz Harrosh1-3/+0
ios.c will be moving to an external library, for use by the objects-layout-driver. Remove from it some exofs specific functions. Also g_attr_logical_length is used both by inode.c and ios.c move definition to the later, to keep it independent Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Add offset/length to exofs_get_io_stateBoaz Harrosh1-13/+21
In future raid code we will need to know the IO offset/length and if it's a read or write to determine some of the array sizes we'll need. So add a new exofs_get_rw_state() API for use when writeing/reading. All other simple cases are left using the old way. The major change to this is that now we need to call exofs_get_io_state later at inode.c::read_exec and inode.c::write_exec when we actually know these things. So this patch is kept separate so I can test things apart from other changes. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-03-24Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-1/+0
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
2011-03-15exofs: Write sbi->s_nextid as part of the Create commandBoaz Harrosh1-1/+3
Before when creating a new inode, we'd set the sb->s_dirt flag, and sometime later the system would write out s_nextid as part of the sb_info. Also on inode sync we would force the sb sync as well. Define the s_nextid as a new partition attribute and set it every time we create a new object. At mount we read it from it's new place. We now never set sb->s_dirt anywhere in exofs. write_super is actually never called. The call to exofs_write_super from exofs_put_super is also removed because the VFS always calls ->sync_fs before calling ->put_super twice. To stay backward-and-forward compatible we also write the old s_nextid in the super_block object at unmount, and support zero length attribute on mount. This also fixes a BUG where in layouts when group_width was not a divisor of EXOFS_SUPER_ID (0x10000) the s_nextid was not read from the device it was written to. Because of the sliding window layout trick, and because the read was always done from the 0 device but the write was done via the raid engine that might slide the device view. Now we read and write through the raid engine. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-03-15exofs: Override read-ahead to align on stripe_sizebharrosh@panasas.com1-4/+15
* Set all inode->i_mapping->backing_dev_info to point to the per super-block sb->s_bdi. * Calculating a read_ahead that is: - preferable 2 stripes long (Future patch will add a mount option to override this) - Minimum 128K aligned up to stripe-size - Caped to maximum-IO-sizes round down to stripe_size. (Max sizes are governed by max bio-size that fits in a page times number-of-devices) CC: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-03-15exofs: simple fsync race fixNick Piggin1-1/+2
It is incorrect to test inode dirty bits without participating in the inode writeback protocol. Inode writeback sets I_SYNC and clears I_DIRTY_?, then writes out the particular bits, then clears I_SYNC when it is done. BTW. it may not completely write all pages out, so I_DIRTY_PAGES would get set again. This is a standard pattern used throughout the kernel's writeback caches (I_SYNC ~= I_WRITEBACK, if that makes it clearer). And so it is not possible to determine an inode's dirty status just by checking I_DIRTY bits. Especially not for the purpose of data integrity syncs. Missing the check for these bits means that fsync can complete while writeback to the inode is underway. Inode writeback functions get this right, so call into them rather than try to shortcut things by testing dirty state improperly. Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-03-15exofs: Optimize read_4_writeBoaz Harrosh1-3/+22
Don't attempt a read passed i_size, just zero the page and be done with it. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-03-10block: remove per-queue pluggingJens Axboe1-1/+0
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-02Revert "exofs: Set i_mapping->backing_dev_info anyway"Boaz Harrosh1-2/+0
This reverts commit 115e19c53501edc11f730191f7f047736815ae3d. Apparently setting inode->bdi to one's own sb->s_bdi stops VFS from sending *read-aheads*. This problem was bisected to this commit. A revert fixes it. I'll investigate farther why is this happening for the next Kernel, but for now a revert. I'm sending to stable@kernel.org as well, since it exists also in 2.6.37. 2.6.36 is good and does not have this patch. CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25exofs: Remove inode->i_count manipulation in exofs_new_inodeBoaz Harrosh1-19/+9
exofs_new_inode() was incrementing the inode->i_count and decrementing it in create_done(), in a bad attempt to make sure the inode will still be there when the asynchronous create_done() finally arrives. This was very stupid because iput() was not called, and if it was actually needed, it would leak the inode. However all this is not needed, because at exofs_evict_inode() we already wait for create_done() by waiting for the object_created event. Therefore remove the superfluous ref counting and just Thicken the comment at exofs_evict_inode() a bit. While at it change places that open coded wait_obj_created() to call the already available wrapper. CC: Dave Chinner <dchinner@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-10-25fs/exofs: typo fix of faild to failedJoe Perches1-7/+7
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-10-18exofs: Set i_mapping->backing_dev_info anywayBoaz Harrosh1-0/+2
Though it has been promised that inode->i_mapping->backing_dev_info is not used and the supporting code is fine. Until the pointer will default to NULL, I'd rather it points to the correct thing regardless. At least for future infrastructure coder it is a clear indication of where are the key points that inodes are initialized. I know because it took me time to find this out. Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com>
2010-10-18exofs: Cleaup read path in regard with read_for_writeBoaz Harrosh1-20/+14
Last BUG fix added a flag to the the page_collect structure to communicate with readpage_strip. This calls for a clean up removing that flag's reincarnations in the read functions parameters. Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com>
2010-10-08exofs: Fix double page_unlock BUG in write_begin/endBoaz Harrosh1-1/+7
This BUG is there since the first submit of the code, but only triggered in last Kernel. It's timing related do to the asynchronous object-creation behaviour of exofs. (Which should be investigated farther) The bug is obvious hence the fixed. Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com>
2010-08-11Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds1-7/+2
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Fix groups code when num_devices is not divisible by group_width exofs: Remove useless optimization exofs: exofs_file_fsync and exofs_file_flush correctness exofs: Remove superfluous dependency on buffer_head and writeback
2010-08-09convert exofs to ->evict_inode()Al Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09exofs: New truncate sequenceBoaz Harrosh1-73/+42
These changes are crafted based on the similar conversion done to ext2 by Nick Piggin. * Remove the deprecated ->truncate vector. Let exofs_setattr take care of on-disk size updates. * Call truncate_pagecache on the unused pages if write_begin/end fails. * Cleanup exofs_delete_inode that did stupid inode writes and updates on an inode that will be removed. * And finally get rid of exofs_get_block. We never had any blocks it was all for calling nobh_truncate_page. nobh_truncate_page is not actually needed in exofs since the last page is complete and gone, just like all the other pages. There is no partial blocks in exofs. I've tested with this patch, and there are no apparent failures, so far. CC: Nick Piggin <npiggin@suse.de> CC: Christoph Hellwig <hch@lst.de> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09remove inode_setattrChristoph Hellwig1-2/+12
Replace inode_setattr with opencoded variants of it in all callers. This moves the remaining call to vmtruncate into the filesystem methods where it can be replaced with the proper truncate sequence. In a few cases it was obvious that we would never end up calling vmtruncate so it was left out in the opencoded variant: spufs: explicitly checks for ATTR_SIZE earlier btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above In addition to that ncpfs called inode_setattr with handcrafted iattrs, which allowed to trim down the opencoded variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-04exofs: Remove superfluous dependency on buffer_head and writebackBoaz Harrosh1-7/+2
exofs_releasepage && exofs_invalidatepage are never called. Leave the WARN_ONs but remove any code. Remove the cleanup other stale #includes. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-05-24Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds1-0/+30
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: confusion between kmap() and kmap_atomic() api exofs: Add default address_space_operations
2010-05-21exofs: replace inode uid,gid,mode initialization with helper functionDmitry Monakhov1-10/+1
Ack-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-17exofs: Add default address_space_operationsBoaz Harrosh1-0/+30
All vectors of address_space_operations should be initialized by the filesystem. Add the missing parts. This is actually an optimization, by using __set_page_dirty_nobuffers. The default, in case of NULL, would be __set_page_dirty_buffers which has these extar if(s). .releasepage && .invalidatepage should both not be called because page_private() is NULL in exofs. Put a WARN_ON if they are called, to indicate the Kernel has changed in this regard, if when it does. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-05pass writeback_control to ->write_inodeChristoph Hellwig1-2/+2
This gives the filesystem more information about the writeback that is happening. Trond requested this for the NFS unstable write handling, and other filesystems might benefit from this too by beeing able to distinguish between the different callers in more detail. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-28exofs: Error recovery if object is missing from storageBoaz Harrosh1-1/+11
If an object is referenced by a directory but does not exist on a target, it is a very serious corruption that means: 1. Either a power failure with very slim chance of it happening. Because the directory update is always submitted much after object creation, but if a directory is written to one device and the object creation to another it might theoretically happen. 2. It only ever happened to me while developing with BUGs causing file corruption. Crashes could also cause it but they are more like case 1. In any way the object does not exist, so data is surely lost. If there is a mix-up in the obj-id or data-map, then lost objects can be salvaged by off-line fsck. The only recoverable information is the directory name. By letting it appear as a regular empty file, with date==0 (1970 Jan 1st) ownership to root, we enable recovery of the only useful information. And also enable deletion or over-write. I can see how this can hurt. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: convert io_state to use pages array instead of bio at inputBoaz Harrosh1-40/+41
* inode.c operations are full-pages based, and not actually true scatter-gather * Lets us use more pages at once upto 512 (from 249) in 64 bit * Brings us much much closer to be able to use exofs's io_state engine from objlayout driver. (Once I decide where to put the common code) After RAID0 patch the outer (input) bio was never used as a bio, but was simply a page carrier into the raid engine. Even in the simple mirror/single-dev arrangement pages info was copied into a second bio. It is now easer to just pass a pages array into the io_state and prepare bio(s) once. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: RAID0 supportBoaz Harrosh1-22/+4
We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Define on-disk per-inode optional layout attributeBoaz Harrosh1-5/+51
* Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Move layout related members to a layout structureBoaz Harrosh1-7/+7
* Abstract away those members in exofs_sb_info that are related/needed by a layout into a new exofs_layout structure. Embed it in exofs_sb_info. * At exofs_io_state receive/keep a pointer to an exofs_layout. No need for an exofs_sb_info pointer, all we need is at exofs_layout. * Change any usage of above exofs_sb_info members to their new name. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: debug print even lessBoaz Harrosh1-10/+13
* Last debug trimming left in some stupid print, remove them. Fixup some other prints * Shift printing from inode.c to ios.c * Add couple of prints when memory allocation fails. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>