summaryrefslogtreecommitdiffstats
path: root/fs/exec.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-10vfs: Commit to never having exectuables on proc and sysfs.Eric W. Biederman1-2/+8
Today proc and sysfs do not contain any executable files. Several applications today mount proc or sysfs without noexec and nosuid and then depend on there being no exectuables files on proc or sysfs. Having any executable files show on proc or sysfs would cause a user space visible regression, and most likely security problems. Therefore commit to never allowing executables on proc and sysfs by adding a new flag to mark them as filesystems without executables and enforce that flag. Test the flag where MNT_NOEXEC is tested today, so that the only user visible effect will be that exectuables will be treated as if the execute bit is cleared. The filesystems proc and sysfs do not currently incoporate any executable files so this does not result in any user visible effects. This makes it unnecessary to vet changes to proc and sysfs tightly for adding exectuable files or changes to chattr that would modify existing files, as no matter what the individual file say they will not be treated as exectuable files by the vfs. Not having to vet changes to closely is important as without this we are only one proc_create call (or another goof up in the implementation of notify_change) from having problematic executables on proc. Those mistakes are all too easy to make and would create a situation where there are security issues or the assumptions of some program having to be broken (and cause userspace regressions). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-05-12parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards ↵Helge Deller1-0/+3
architectures On architectures where the stack grows upwards (CONFIG_STACK_GROWSUP=y, currently parisc and metag only) stack randomization sometimes leads to crashes when the stack ulimit is set to lower values than STACK_RND_MASK (which is 8 MB by default if not defined in arch-specific headers). The problem is, that when the stack vm_area_struct is set up in fs/exec.c, the additional space needed for the stack randomization (as defined by the value of STACK_RND_MASK) was not taken into account yet and as such, when the stack randomization code added a random offset to the stack start, the stack effectively got smaller than what the user defined via rlimit_max(RLIMIT_STACK) which then sometimes leads to out-of-stack situations and crashes. This patch fixes it by adding the maximum possible amount of memory (based on STACK_RND_MASK) which theoretically could be added by the stack randomization code to the initial stack size. That way, the user-defined stack size is always guaranteed to be at minimum what is defined via rlimit_max(RLIMIT_STACK). This bug is currently not visible on the metag architecture, because on metag STACK_RND_MASK is defined to 0 which effectively disables stack randomization. The changes to fs/exec.c are inside an "#ifdef CONFIG_STACK_GROWSUP" section, so it does not affect other platformws beside those where the stack grows upwards (parisc and metag). Signed-off-by: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org # v3.16+
2015-04-19fs: take i_mutex during prepare_binprm for set[ug]id executablesJann Horn1-28/+48
This prevents a race between chown() and execve(), where chowning a setuid-user binary to root would momentarily make the binary setuid root. This patch was mostly written by Linus Torvalds. Signed-off-by: Jann Horn <jann@thejh.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17fs/exec.c:de_thread: move notify_count write under lockKirill Tkhai1-1/+5
We set sig->notify_count = -1 between RELEASE and ACQUIRE operations: spin_unlock_irq(lock); ... if (!thread_group_leader(tsk)) { ... for (;;) { sig->notify_count = -1; write_lock_irq(&tasklist_lock); There are no restriction on it so other processors may see this STORE mixed with other STOREs in both areas limited by the spinlocks. Probably, it may be reordered with the above sig->group_exit_task = tsk; sig->notify_count = zap_other_threads(tsk); in some way. Set it under tasklist_lock locked to be sure nothing will be reordered. Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17prctl: avoid using mmap_sem for exe_file serializationDavidlohr Bueso1-0/+6
Oleg cleverly suggested using xchg() to set the new mm->exe_file instead of calling set_mm_exe_file() which requires some form of serialization -- mmap_sem in this case. For archs that do not have atomic rmw instructions we still fallback to a spinlock alternative, so this should always be safe. As such, we only need the mmap_sem for looking up the backing vm_file, which can be done sharing the lock. Naturally, this means we need to manually deal with both the new and old file reference counting, and we need not worry about the MMF_EXE_FILE_CHANGED bits, which can probably be deleted in the future anyway. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-23fs: create proper filename objects using getname_kernel()Paul Moore1-2/+8
There are several areas in the kernel that create temporary filename objects using the following pattern: int func(const char *name) { struct filename *file = { .name = name }; ... return 0; } ... which for the most part works okay, but it causes havoc within the audit subsystem as the filename object does not persist beyond the lifetime of the function. This patch converts all of these temporary filename objects into proper filename objects using getname_kernel() and putname() which ensure that the filename object persists until the audit subsystem is finished with it. Also, a special thanks to Al Viro, Guenter Roeck, and Sabrina Dubroca for helping resolve a difficult kernel panic on boot related to a use-after-free problem in kern_path_create(); the thread can be seen at the link below: * https://lkml.org/lkml/2015/1/20/710 This patch includes code that was either based on, or directly written by Al in the above thread. CC: viro@zeniv.linux.org.uk CC: linux@roeck-us.net CC: sd@queasysnail.net CC: linux-fsdevel@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-13syscalls: implement execveat() system callDavid Drysdale1-13/+100
This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-18fs: Do not include mpx.h in exec.cDave Hansen1-1/+0
We no longer need mpx.h in exec.c. This will obviously also break the build for non-x86 builds. We get the MPX includes that we need from mmu_context.h now. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20141118003608.837015B3@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-18x86, mpx: On-demand kernel allocation of bounds tablesDave Hansen1-0/+2
This is really the meat of the MPX patch set. If there is one patch to review in the entire series, this is the one. There is a new ABI here and this kernel code also interacts with userspace memory in a relatively unusual manner. (small FAQ below). Long Description: This patch adds two prctl() commands to provide enable or disable the management of bounds tables in kernel, including on-demand kernel allocation (See the patch "on-demand kernel allocation of bounds tables") and cleanup (See the patch "cleanup unused bound tables"). Applications do not strictly need the kernel to manage bounds tables and we expect some applications to use MPX without taking advantage of this kernel support. This means the kernel can not simply infer whether an application needs bounds table management from the MPX registers. The prctl() is an explicit signal from userspace. PR_MPX_ENABLE_MANAGEMENT is meant to be a signal from userspace to require kernel's help in managing bounds tables. PR_MPX_DISABLE_MANAGEMENT is the opposite, meaning that userspace don't want kernel's help any more. With PR_MPX_DISABLE_MANAGEMENT, the kernel won't allocate and free bounds tables even if the CPU supports MPX. PR_MPX_ENABLE_MANAGEMENT will fetch the base address of the bounds directory out of a userspace register (bndcfgu) and then cache it into a new field (->bd_addr) in the 'mm_struct'. PR_MPX_DISABLE_MANAGEMENT will set "bd_addr" to an invalid address. Using this scheme, we can use "bd_addr" to determine whether the management of bounds tables in kernel is enabled. Also, the only way to access that bndcfgu register is via an xsaves, which can be expensive. Caching "bd_addr" like this also helps reduce the cost of those xsaves when doing table cleanup at munmap() time. Unfortunately, we can not apply this optimization to #BR fault time because we need an xsave to get the value of BNDSTATUS. ==== Why does the hardware even have these Bounds Tables? ==== MPX only has 4 hardware registers for storing bounds information. If MPX-enabled code needs more than these 4 registers, it needs to spill them somewhere. It has two special instructions for this which allow the bounds to be moved between the bounds registers and some new "bounds tables". They are similar conceptually to a page fault and will be raised by the MPX hardware during both bounds violations or when the tables are not present. This patch handles those #BR exceptions for not-present tables by carving the space out of the normal processes address space (essentially calling the new mmap() interface indroduced earlier in this patch set.) and then pointing the bounds-directory over to it. The tables *need* to be accessed and controlled by userspace because the instructions for moving bounds in and out of them are extremely frequent. They potentially happen every time a register pointing to memory is dereferenced. Any direct kernel involvement (like a syscall) to access the tables would obviously destroy performance. ==== Why not do this in userspace? ==== This patch is obviously doing this allocation in the kernel. However, MPX does not strictly *require* anything in the kernel. It can theoretically be done completely from userspace. Here are a few ways this *could* be done. I don't think any of them are practical in the real-world, but here they are. Q: Can virtual space simply be reserved for the bounds tables so that we never have to allocate them? A: As noted earlier, these tables are *HUGE*. An X-GB virtual area needs 4*X GB of virtual space, plus 2GB for the bounds directory. If we were to preallocate them for the 128TB of user virtual address space, we would need to reserve 512TB+2GB, which is larger than the entire virtual address space today. This means they can not be reserved ahead of time. Also, a single process's pre-popualated bounds directory consumes 2GB of virtual *AND* physical memory. IOW, it's completely infeasible to prepopulate bounds directories. Q: Can we preallocate bounds table space at the same time memory is allocated which might contain pointers that might eventually need bounds tables? A: This would work if we could hook the site of each and every memory allocation syscall. This can be done for small, constrained applications. But, it isn't practical at a larger scale since a given app has no way of controlling how all the parts of the app might allocate memory (think libraries). The kernel is really the only place to intercept these calls. Q: Could a bounds fault be handed to userspace and the tables allocated there in a signal handler instead of in the kernel? A: (thanks to tglx) mmap() is not on the list of safe async handler functions and even if mmap() would work it still requires locking or nasty tricks to keep track of the allocation state there. Having ruled out all of the userspace-only approaches for managing bounds tables that we could think of, we create them on demand in the kernel. Based-on-patch-by: Qiaowei Ren <qiaowei.ren@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20141114151829.AD4310DE@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-09handle suicide on late failure exits in execve() in search_binary_handler()Al Viro1-6/+11
... rather than doing that in the guts of ->load_binary(). [updated to fix the bug spotted by Shentino - for SIGSEGV we really need something stronger than send_sig_info(); again, better do that in one place] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-08fork/exec: cleanup mm initializationVladimir Davydov1-4/+0
mm initialization on fork/exec is spread all over the place, which makes the code look inconsistent. We have mm_init(), which is supposed to init/nullify mm's internals, but it doesn't init all the fields it should: - on fork ->mmap,mm_rb,vmacache_seqnum,map_count,mm_cpumask,locked_vm are zeroed in dup_mmap(); - on fork ->pmd_huge_pte is zeroed in dup_mm(), immediately before calling mm_init(); - ->cpu_vm_mask_var ptr is initialized by mm_init_cpumask(), which is called before mm_init() on both fork and exec; - ->context is initialized by init_new_context(), which is called after mm_init() on both fork and exec; Let's consolidate all the initializations in mm_init() to make the code look cleaner. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-18seccomp: implement SECCOMP_FILTER_FLAG_TSYNCKees Cook1-1/+1
Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-07-18sched: move no_new_privs into new atomic flagsKees Cook1-2/+2
Since seccomp transitions between threads requires updates to the no_new_privs flag to be atomic, the flag must be part of an atomic flag set. This moves the nnp flag into a separate task field, and introduces accessors. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-06perf: Differentiate exec() and non-exec() comm eventsAdrian Hunter1-3/+3
perf tools like 'perf report' can aggregate samples by comm strings, which generally works. However, there are other potential use-cases. For example, to pair up 'calls' with 'returns' accurately (from branch events like Intel BTS) it is necessary to identify whether the process has exec'd. Although a comm event is generated when an 'exec' happens it is also generated whenever the comm string is changed on a whim (e.g. by prctl PR_SET_NAME). This patch adds a flag to the comm event to differentiate one case from the other. In order to determine whether the kernel supports the new flag, a selection bit named 'exec' is added to struct perf_event_attr. The bit does nothing but will cause perf_event_open() to fail if the bit is set on kernels that do not have it defined. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/537D9EBE.7030806@intel.com Cc: Paul Mackerras <paulus@samba.org> Cc: Dave Jones <davej@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-06perf: Fix perf_event_comm() vs. exec() assumptionPeter Zijlstra1-0/+1
perf_event_comm() assumes that set_task_comm() is only called on exec(), and in particular that its only called on current. Neither are true, as Dave reported a WARN triggered by set_task_comm() being called on !current. Separate the exec() hook from the comm hook. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20140521153219.GH5226@laptop.programming.kicks-ass.net [ Build fix. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-15metag: Reduce maximum stack size to 256MBJames Hogan1-3/+3
Specify the maximum stack size for arches where the stack grows upward (parisc and metag) in asm/processor.h rather than hard coding in fs/exec.c so that metag can specify a smaller value of 256MB rather than 1GB. This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased beyond a safe value by root. E.g. when starting a process after running "ulimit -H -s unlimited" it will then attempt to use a stack size of the maximum 1GB which is far too big for metag's limited user virtual address space (stack_top is usually 0x3ffff000): BUG: failure at fs/exec.c:589/shift_arg_pages()! Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # only needed for >= v3.9 (arch/metag)
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-07exec: kill bprm->tcomm[], simplify the "basename" logicOleg Nesterov1-19/+2
Starting from commit c4ad8f98bef7 ("execve: use 'struct filename *' for executable name passing") bprm->filename can not go away after flush_old_exec(), so we do not need to save the binary name in bprm->tcomm[] added by 96e02d158678 ("exec: fix use-after-free bug in setup_new_exec()"). And there was never need for filename_to_taskname-like code, we can simply do set_task_comm(kbasename(filename). This patch has to change set_task_comm() and trace_task_rename() to accept "const char *", but I think this change is also good. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm: per-thread vma cachingDavidlohr Bueso1-1/+4
This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03fs, kernel: permit disabling the uselib syscallJosh Triplett1-0/+2
uselib hasn't been used since libc5; glibc does not use it. Support turning it off. When disabled, also omit the load_elf_library implementation from binfmt_elf.c, which only uselib invokes. bloat-o-meter: add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-785 (-785) function old new delta padzero 39 36 -3 uselib_flags 20 - -20 sys_uselib 168 - -168 SyS_uselib 168 - -168 load_elf_library 426 - -426 The new CONFIG_USELIB defaults to `y'. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-01read_code(): go through vfs_read() instead of calling the method directlyAl Viro1-1/+1
... and don't skip on sanity checks. It's *not* a hot path, TYVM (a couple of calls per a.out execve(), for pity sake) and headers of random a.out binary are not to be trusted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-06fs/compat: convert to COMPAT_SYSCALL_DEFINEHeiko Carstens1-3/+3
Convert all compat system call functions where all parameter types have a size of four or less than four bytes, or are pointer types to COMPAT_SYSCALL_DEFINE. The implicit casts within COMPAT_SYSCALL_DEFINE will perform proper zero and sign extension to 64 bit of all parameters if needed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-02-05execve: use 'struct filename *' for executable name passingLinus Torvalds1-24/+21
This changes 'do_execve()' to get the executable name as a 'struct filename', and to free it when it is done. This is what the normal users want, and it simplifies and streamlines their error handling. The controlled lifetime of the executable name also fixes a use-after-free problem with the trace_sched_process_exec tracepoint: the lifetime of the passed-in string for kernel users was not at all obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize the pathname allocation lifetime with the execve() having finished, which in turn meant that the trace point that happened after mm_release() of the old process VM ended up using already free'd memory. To solve the kernel string lifetime issue, this simply introduces "getname_kernel()" that works like the normal user-space getname() function, except with the source coming from kernel memory. As Oleg points out, this also means that we could drop the tcomm[] array from 'struct linux_binprm', since the pathname lifetime now covers setup_new_exec(). That would be a separate cleanup. Reported-by: Igor Zhbanov <i.zhbanov@samsung.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23fs/exec.c: call arch_pick_mmap_layout() only onceRichard Weinberger1-1/+0
Currently both setup_new_exec() and flush_old_exec() issue a call to arch_pick_mmap_layout(). As setup_new_exec() and flush_old_exec() are always called pairwise arch_pick_mmap_layout() is called twice. This patch removes one call from setup_new_exec() to have it only called once. Signed-off-by: Richard Weinberger <richard@nod.at> Tested-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23exec: avoid propagating PF_NO_SETAFFINITY into userspace childZhang Yi1-2/+2
Userspace process doesn't want the PF_NO_SETAFFINITY, but its parent may be a kernel worker thread which has PF_NO_SETAFFINITY set, and this worker thread can do kernel_thread() to create the child. Clearing this flag in usersapce child to enable its migrating capability. Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23exec: kill task_struct->did_execOleg Nesterov1-1/+0
We can kill either task->did_exec or PF_FORKNOEXEC, they are mutually exclusive. The patch kills ->did_exec because it has a single user. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23exec: move the final allow_write_access/fput into free_bprm()Oleg Nesterov1-15/+5
Both success/failure paths cleanup bprm->file, we can move this code into free_bprm() to simlify and cleanup this logic. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23exec:check_unsafe_exec: kill the dead -EAGAIN and clear_in_exec logicOleg Nesterov1-21/+8
fs_struct->in_exec == T means that this ->fs is used by a single process (thread group), and one of the treads does do_execve(). To avoid the mt-exec races this code has the following complications: 1. check_unsafe_exec() returns -EBUSY if ->in_exec was already set by another thread. 2. do_execve_common() records "clear_in_exec" to ensure that the error path can only clear ->in_exec if it was set by current. However, after 9b1bf12d5d51 "signals: move cred_guard_mutex from task_struct to signal_struct" we do not need these complications: 1. We can't race with our sub-thread, this is called under per-process ->cred_guard_mutex. And we can't race with another CLONE_FS task, we already checked that this fs is not shared. We can remove the dead -EAGAIN logic. 2. "out_unmark:" in do_execve_common() is either called under ->cred_guard_mutex, or after de_thread() which kills other threads, so we can't race with sub-thread which could set ->in_exec. And if ->fs is shared with another process ->in_exec should be false anyway. We can clear in_exec unconditionally. This also means that check_unsafe_exec() can be void. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23exec:check_unsafe_exec: use while_each_thread() rather than next_thread()Oleg Nesterov1-1/+2
next_thread() should be avoided, change check_unsafe_exec() to use while_each_thread(). Nobody except signal->curr_target actually needs next_thread-like code, and we need to change (fix) this interface. This particular code is fine, p == current. But in general the code like this can loop forever if p exits and next_thread(t) can't reach the unhashed thread. This also saves 32 bytes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23coredump: make __get_dumpable/get_dumpable inline, kill fs/coredump.hOleg Nesterov1-18/+0
1. Remove fs/coredump.h. It is not clear why do we need it, it only declares __get_dumpable(), signal.c includes it for no reason. 2. Now that get_dumpable() and __get_dumpable() are really trivial make them inline in linux/sched.h. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Alex Kelly <alex.page.kelly@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23coredump: kill MMF_DUMPABLE and MMF_DUMP_SECURELYOleg Nesterov1-15/+6
Nobody actually needs MMF_DUMPABLE/MMF_DUMP_SECURELY, they are only used to enforce the encoding of SUID_DUMP_* enum in mm->flags & MMF_DUMPABLE_MASK. Now that set_dumpable() updates both bits atomically we can kill them and simply store the value "as is" in 2 lower bits. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Alex Kelly <alex.page.kelly@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23coredump: set_dumpable: fix the theoretical race with itselfOleg Nesterov1-34/+15
set_dumpable() updates MMF_DUMPABLE_MASK in a non-trivial way to ensure that get_dumpable() can't observe the intermediate state, but this all can't help if multiple threads call set_dumpable() at the same time. And in theory commit_creds()->set_dumpable(SUID_DUMP_ROOT) racing with sys_prctl()->set_dumpable(SUID_DUMP_DISABLE) can result in SUID_DUMP_USER. Change this code to update both bits atomically via cmpxchg(). Note: this assumes that it is safe to mix bitops and cmpxchg. IOW, if, say, an architecture implements cmpxchg() using the locking (like arch/parisc/lib/bitops.c does), then it should use the same locks for set_bit/etc. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Alex Kelly <alex.page.kelly@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-21Merge git://git.infradead.org/users/eparis/auditLinus Torvalds1-4/+1
Pull audit updates from Eric Paris: "Nothing amazing. Formatting, small bug fixes, couple of fixes where we didn't get records due to some old VFS changes, and a change to how we collect execve info..." Fixed conflict in fs/exec.c as per Eric and linux-next. * git://git.infradead.org/users/eparis/audit: (28 commits) audit: fix type of sessionid in audit_set_loginuid() audit: call audit_bprm() only once to add AUDIT_EXECVE information audit: move audit_aux_data_execve contents into audit_context union audit: remove unused envc member of audit_aux_data_execve audit: Kill the unused struct audit_aux_data_capset audit: do not reject all AUDIT_INODE filter types audit: suppress stock memalloc failure warnings since already managed audit: log the audit_names record type audit: add child record before the create to handle case where create fails audit: use given values in tty_audit enable api audit: use nlmsg_len() to get message payload length audit: use memset instead of trying to initialize field by field audit: fix info leak in AUDIT_GET requests audit: update AUDIT_INODE filter rule to comparator function audit: audit feature to set loginuid immutable audit: audit feature to only allow unsetting the loginuid audit: allow unsetting the loginuid (with priv) audit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE audit: loginuid functions coding style selinux: apply selinux checks on new audit message types ...
2013-11-13Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds1-0/+6
Merge first patch-bomb from Andrew Morton: "Quite a lot of other stuff is banked up awaiting further next->mainline merging, but this batch contains: - Lots of random misc patches - OCFS2 - Most of MM - backlight updates - lib/ updates - printk updates - checkpatch updates - epoll tweaking - rtc updates - hfs - hfsplus - documentation - procfs - update gcov to gcc-4.7 format - IPC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits) ipc, msg: fix message length check for negative values ipc/util.c: remove unnecessary work pending test devpts: plug the memory leak in kill_sb ./Makefile: export initial ramdisk compression config option init/Kconfig: add option to disable kernel compression drivers: w1: make w1_slave::flags long to avoid memory corruption drivers/w1/masters/ds1wm.cuse dev_get_platdata() drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page() drivers/memstick/core/mspro_block.c: fix attributes array allocation drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr kernel/panic.c: reduce 1 byte usage for print tainted buffer gcov: reuse kbasename helper kernel/gcov/fs.c: use pr_warn() kernel/module.c: use pr_foo() gcov: compile specific gcov implementation based on gcc version gcov: add support for gcc 4.7 gcov format gcov: move gcov structs definitions to a gcc version specific file kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener() kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end() kernel/sysctl_binary.c: use scnprintf() instead of snprintf() ...
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds1-20/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-11-13exec/ptrace: fix get_dumpable() incorrect testsKees Cook1-0/+6
The get_dumpable() return value is not boolean. Most users of the function actually want to be testing for non-SUID_DUMP_USER(1) rather than SUID_DUMP_DISABLE(0). The SUID_DUMP_ROOT(2) is also considered a protected state. Almost all places did this correctly, excepting the two places fixed in this patch. Wrong logic: if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ } or if (dumpable == 0) { /* be protective */ } or if (!dumpable) { /* be protective */ } Correct logic: if (dumpable != SUID_DUMP_USER) { /* be protective */ } or if (dumpable != 1) { /* be protective */ } Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a user was able to ptrace attach to processes that had dropped privileges to that user. (This may have been partially mitigated if Yama was enabled.) The macros have been moved into the file that declares get/set_dumpable(), which means things like the ia64 code can see them too. CVE-2013-2929 Reported-by: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-05audit: call audit_bprm() only once to add AUDIT_EXECVE informationRichard Guy Briggs1-4/+1
Move the audit_bprm() call from search_binary_handler() to exec_binprm(). This allows us to get rid of the mm member of struct audit_aux_data_execve since bprm->mm will equal current->mm. This also mitigates the issue that ->argc could be modified by the load_binary() call in search_binary_handler(). audit_bprm() was being called to add an AUDIT_EXECVE record to the audit context every time search_binary_handler() was recursively called. Only one reference is necessary. Reported-by: Oleg Nesterov <onestero@redhat.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> --- This patch is against 3.11, but was developed on Oleg's post-3.11 patches that introduce exec_binprm().
2013-10-24file->f_op is never NULL...Al Viro1-20/+15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-09sched/numa: Call task_numa_free() from do_execve()Rik van Riel1-0/+1
It is possible for a task in a numa group to call exec, and have the new (unrelated) executable inherit the numa group association from its former self. This has the potential to break numa grouping, and is trivial to fix. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-51-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-11exec: cleanup the error handling in search_binary_handler()Oleg Nesterov1-8/+3
The error hanling and ret-from-loop look confusing and inconsistent. - "retval >= 0" simply returns - "!bprm->file" returns too but with read_unlock() because binfmt_lock was already re-acquired - "retval != -ENOEXEC || bprm->mm == NULL" does "break" and relies on the same check after the main loop Consolidate these checks into a single if/return statement. need_retry still checks "retval == -ENOEXEC", but this and -ENOENT before the main loop are not needed. This is only for pathological and impossible list_empty(&formats) case. It is not clear why do we check "bprm->mm == NULL", probably this should be removed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: don't retry if request_module() failsOleg Nesterov1-1/+2
A separate one-liner for better documentation. It doesn't make sense to retry if request_module() fails to exec /sbin/modprobe, add the additional "request_module() < 0" check. However, this logic still doesn't look exactly right: 1. It would be better to check "request_module() != 0", the user space modprobe process should report the correct exit code. But I didn't dare to add the user-visible change. 2. The whole ENOEXEC logic looks suboptimal. Suppose that we try to exec a "#!path-to-unsupported-binary" script. In this case request_module() + "retry" will be done twice: first by the "depth == 1" code, and then again by the "depth == 0" caller which doesn't make sense. 3. And note that in the case above bprm->buf was already changed by load_script()->prepare_binprm(), so this looks even more ugly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: cleanup the CONFIG_MODULES logicOleg Nesterov1-37/+31
search_binary_handler() uses "for (try=0; try<2; try++)" to avoid "goto" but the code looks too complicated and horrible imho. We still need to check "try == 0" before request_module() and add the additional "break" for !CONFIG_MODULES case. Kill this loop and use a simple "bool need_retry" + "goto retry". The code looks much simpler and we do not even need ifdef's, gcc can optimize out the "if (need_retry)" block if !IS_ENABLED(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: kill ->load_binary != NULL check in search_binary_handler()Oleg Nesterov1-4/+3
search_binary_handler() checks ->load_binary != NULL for no reason, this method should be always defined. Turn this check into WARN_ON() and move it into __register_binfmt(). Also, kill the function pointer. The current code looks confusing, as if ->load_binary can go away after read_unlock(&binfmt_lock). But we rely on module_get(fmt->module), this fmt can't be changed or unregistered, otherwise this code is buggy anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: move allow_write_access/fput to exec_binprm()Oleg Nesterov1-4/+6
When search_binary_handler() succeeds it does allow_write_access() and fput(), then it clears bprm->file to ensure the caller will not do the same. We can simply move this code to exec_binprm() which is called only once. In fact we could move this to free_bprm() and remove the same code in do_execve_common's error path. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: proc_exec_connector() should be called only onceOleg Nesterov1-1/+1
A separate one-liner with the minor fix. PROC_EVENT_EXEC reports the "exec" event, but this message is sent at least twice if search_binary_handler() is called by ->load_binary() recursively, say, load_script(). Move it to exec_binprm(), this is "depth == 0" code too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: kill "int depth" in search_binary_handler()Oleg Nesterov1-5/+4
Nobody except search_binary_handler() should touch ->recursion_depth, "int depth" buys nothing but complicates the code, kill it. Probably we should also kill "fn" and the !NULL check, ->load_binary should be always defined. And it can not go away after read_unlock() or this code is buggy anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11exec: introduce exec_binprm() for "depth == 0" codeOleg Nesterov1-14/+22
task_pid_nr_ns() and trace/ptrace code in the middle of the recursive search_binary_handler() looks confusing and imho annoying. We only need this code if "depth == 0", lets add a simple helper which calls search_binary_handler() and does trace_sched_process_exec() + ptrace_event(). The patch also moves the setting of task->did_exec, we need to do this only once. Note: we can kill either task->did_exec or PF_FORKNOEXEC. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11mm: track vma changes with VM_SOFTDIRTY bitCyrill Gorcunov1-1/+1
Pavel reported that in case if vma area get unmapped and then mapped (or expanded) in-place, the soft dirty tracker won't be able to recognize this situation since it works on pte level and ptes are get zapped on unmap, loosing soft dirty bit of course. So to resolve this situation we need to track actions on vma level, there VM_SOFTDIRTY flag comes in. When new vma area created (or old expanded) we set this bit, and keep it here until application calls for clearing soft dirty bit. Thus when user space application track memory changes now it can detect if vma area is renewed. Reported-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-16Fix TLB gather virtual address range invalidation corner casesLinus Torvalds1-2/+2
Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc67f97 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c3580b7 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com> Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au> Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/exec.c:de_thread: mt-exec should update ->real_start_timeOleg Nesterov1-0/+1
924b42d5 ("Use boot based time for process start time and boot time in /proc") updated copy_process/do_task_stat but forgot about de_thread(). This breaks "ps axOT" if a sub-thread execs. Note: I think that task->start_time should die. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Tomas Janousek <tjanouse@redhat.com> Cc: Tomas Smetana <tsmetana@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>