| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The goal of this patch is to reduce contention of ep_poll_callback()
which can be called concurrently from different CPUs in case of high
events rates and many fds per epoll. Problem can be very well
reproduced by generating events (write to pipe or eventfd) from many
threads, while consumer thread does polling. In other words this patch
increases the bandwidth of events which can be delivered from sources to
the poller by adding poll items in a lockless way to the list.
The main change is in replacement of the spinlock with a rwlock, which
is taken on read in ep_poll_callback(), and then by adding poll items to
the tail of the list using xchg atomic instruction. Write lock is taken
everywhere else in order to stop list modifications and guarantee that
list updates are fully completed (I assume that write side of a rwlock
does not starve, it seems qrwlock implementation has these guarantees).
The following are some microbenchmark results based on the test [1]
which starts threads which generate N events each. The test ends when
all events are successfully fetched by the poller thread:
spinlock
========
threads events/ms run-time ms
8 6402 12495
16 7045 22709
32 7395 43268
rwlock + xchg
=============
threads events/ms run-time ms
8 10038 7969
16 12178 13138
32 13223 24199
According to the results bandwidth of delivered events is significantly
increased, thus execution time is reduced.
This patch was tested with different sort of microbenchmarks and
artificial delays (e.g. "udelay(get_random_int() & 0xff)") introduced
in kernel on paths where items are added to lists.
[1] https://github.com/rouming/test-tools/blob/master/stress-epoll.c
Link: http://lkml.kernel.org/r/20190103150104.17128-5-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Original comment "Activate ep->ws since epi->ws may get deactivated at
any time" indeed sounds loud, but it is incorrect, because the path
where we check epi->ws is a path where insert to ovflist happens, i.e.
ep_scan_ready_list() has taken ep->mtx and waits for this callback to
finish, thus ep_modify() (which unregisters wakeup source) waits for
ep_scan_ready_list().
Here in this patch I simply call ep_pm_stay_awake_rcu(), which is a bit
extra for this path (indirectly protected by main ep->mtx, so even rcu
is not needed), but I do not want to create another naked
__ep_pm_stay_awake() variant only for this particular case, so rcu variant
is just better for all the cases.
Link: http://lkml.kernel.org/r/20190103150104.17128-4-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "use rwlock in order to reduce ep_poll_callback()
contention", v3.
The last patch targets the contention problem in ep_poll_callback(),
which can be very well reproduced by generating events (write to pipe or
eventfd) from many threads, while consumer thread does polling.
The following are some microbenchmark results based on the test [1]
which starts threads which generate N events each. The test ends when
all events are successfully fetched by the poller thread:
spinlock
========
threads events/ms run-time ms
8 6402 12495
16 7045 22709
32 7395 43268
rwlock + xchg
=============
threads events/ms run-time ms
8 10038 7969
16 12178 13138
32 13223 24199
According to the results bandwidth of delivered events is significantly
increased, thus execution time is reduced.
This patch (of 4):
All coming events are stored in FIFO order and this is also should be
applicable to ->ovflist, which originally is stack, i.e. LIFO.
Thus to keep correct FIFO order ->ovflist should reversed by adding
elements to the head of the read list but not to the tail.
Link: http://lkml.kernel.org/r/20190103150104.17128-2-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
|
|
There is no reason why we rearm the waitiqueue upon every fetch_events
retry (for when events are found yet send_events() fails). If nothing
else, this saves four lock operations per retry, and furthermore reduces
the scope of the lock even further.
[akpm@linux-foundation.org: restore code to original position, fix and reflow comment]
Link: http://lkml.kernel.org/r/20181114182532.27981-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is currently called check_events because it, well, did exactly that.
However, since the lockless ep_events_available() call, the label no
longer checks, but just sends the events. Rename as such.
Link: http://lkml.kernel.org/r/20181114182532.27981-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Upon timeout, we can just exit out of the loop, without the cost of the
changing the task's state with an smp_store_mb call. Just exit out of
the loop and be done - setting the task state afterwards will be, of
course, redundant.
[dave@stgolabs.net: forgotten fixlets]
Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5
Link: http://lkml.kernel.org/r/20181108051006.18751-7-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch aims at reducing ep wq.lock hold times in epoll_wait(2). For
the blocking case, there is no need to constantly take and drop the
spinlock, which is only needed to manipulate the waitqueue.
The call to ep_events_available() is now lockless, and only exposed to
benign races. Here, if false positive (returns available events and
does not see another thread deleting an epi from the list) we call into
send_events and then the list's state is correctly seen. Otoh, if a
false negative and we don't see a list_add_tail(), for example, from irq
callback, then it is rechecked again before blocking, which will see the
correct state.
In order for more accuracy to see concurrent list_del_init(), use the
list_empty_careful() variant -- of course, this won't be safe against
insertions from wakeup.
For the overflow list we obviously need to prevent load/store tearing as
we don't want to see partial values while the ready list is disabled.
[dave@stgolabs.net: forgotten fixlets]
Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5
Link: http://lkml.kernel.org/r/20181108051006.18751-6-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Suggested-by: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Insted of just commenting how important it is, lets make it more robust
and add a lockdep_assert_held() call.
Link: http://lkml.kernel.org/r/20181108051006.18751-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ep->ovflist is a secondary ready-list to temporarily store events
that might occur when doing sproc without holding the ep->wq.lock. This
accounts for every time we check for ready events and also send events
back to userspace; both callbacks, particularly the latter because of
copy_to_user, can account for a non-trivial time.
As such, the unlikely() check to see if the pointer is being used, seems
both misleading and sub-optimal. In fact, we go to an awful lot of
trouble to sync both lists, and populating the ovflist is far from an
uncommon scenario.
For example, profiling a concurrent epoll_wait(2) benchmark, with
CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33%
incorrect rate was seen; and when incrementally increasing the number of
epoll instances (which is used, for example for multiple queuing load
balancing models), up to a 90% incorrect rate was seen.
Similarly, by deleting the prediction, 3% throughput boost was seen
across incremental threads.
Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current logic is a bit convoluted. Lets simplify this with a
standard list_for_each_entry_safe() loop instead and just break out
after maxevents is reached.
While at it, remove an unnecessary indentation level in the loop when
there are in fact ready events.
Link: http://lkml.kernel.org/r/20181108051006.18751-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "epoll: some miscellaneous optimizations".
The following are some incremental optimizations on some of the epoll
core. Each patch has the details, but together, the series is seen to
shave off measurable cycles on a number of systems and workloads.
For example, on a 40-core IB, a pipetest as well as parallel
epoll_wait() benchmark show around a 20-30% increase in raw operations
per second when the box is fully occupied (incremental thread counts),
and up to 15% performance improvement with lower counts.
Passes ltp epoll related testcases.
This patch(of 6):
All callers pass the EP_MAX_NESTS constant already, so lets simplify
this a tad and get rid of the redundant parameter for nested eventpolls.
Link: http://lkml.kernel.org/r/20181108051006.18751-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Refactor the logic to restore the sigmask before the syscall
returns into an api.
This is useful for versions of syscalls that pass in the
sigmask and expect the current->sigmask to be changed during
the execution and restored after the execution of the syscall.
With the advent of new y2038 syscalls in the subsequent patches,
we add two more new versions of the syscalls (for pselect, ppoll
and io_pgetevents) in addition to the existing native and compat
versions. Adding such an api reduces the logic that would need to
be replicated otherwise.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Refactor reading sigset from userspace and updating sigmask
into an api.
This is useful for versions of syscalls that pass in the
sigmask and expect the current->sigmask to be changed during,
and restored after, the execution of the syscall.
With the advent of new y2038 syscalls in the subsequent patches,
we add two more new versions of the syscalls (for pselect, ppoll,
and io_pgetevents) in addition to the existing native and compat
versions. Adding such an api reduces the logic that would need to
be replicated otherwise.
Note that the calls to sigprocmask() ignored the return value
from the api as the function only returns an error on an invalid
first argument that is hardcoded at these call sites.
The updated logic uses set_current_blocked() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Instead of having each caller pass the rdllink explicitly, just have
ep_is_linked() pass it while the callers just need the epi pointer. This
helper is all about the rdllink, and this change, furthermore, improves
the function's self documentation.
Link: http://lkml.kernel.org/r/20180727053432.16679-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Similar to other calls, ep_poll() is not called with interrupts disabled,
and we can therefore avoid the irq save/restore dance and just disable
local irqs. In fact, the call should never be called in irq context at
all, considering that the only path is
epoll_wait(2) -> do_epoll_wait() -> ep_poll().
When running on a 2 socket 40-core (ht) IvyBridge a common pipe based
epoll_wait(2) microbenchmark, the following performance improvements are
seen:
# threads vanilla dirty
1 1805587 2106412
2 1854064 2090762
4 1805484 2017436
8 1751222 1974475
16 1725299 1962104
32 1378463 1571233
64 787368 900784
Which is a pretty constantly near 15%.
Also add a lockdep check such that we detect any mischief before
deadlocking.
Link: http://lkml.kernel.org/r/20180727053432.16679-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
... 'tis easier on the eye.
[akpm@linux-foundation.org: use inlines rather than macros]
Link: http://lkml.kernel.org/r/20180725185620.11020-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sprinkle lockdep_assert_irqs_enabled() checks in the functions that do not
save and restore interrupts when dealing with the ep->wq.lock. These are
ep_scan_ready_list() and those called by epoll_ctl(): ep_insert, ep_modify
and ep_remove.
[akpm@linux-foundation.org: remove too-obvious comments]
Link: http://lkml.kernel.org/r/20180721183127.3busfa335zlcjeox@linux-r8p5
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both functions are similar to the context of ep_modify(), called via
epoll_ctl(2). Just like ep_modify(), saving and restoring interrupts is
an overkill in these calls as it will never be called with irqs disabled.
While ep_remove() can be called directly from EPOLL_CTL_DEL, it can also
be called when releasing the file, but this also complies with the above.
Link: http://lkml.kernel.org/r/20180720172956.2883-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "fs/epoll: loosen irq safety when possible".
Both patches replace saving+restoring interrupts when taking the ep->lock
(now the waitqueue lock), with just disabling local irqs. This shows
immediate performance benefits in patch 1 for an epoll workload running on
Xen. The main concern we need to have with this sort of changes in epoll
is the ep_poll_callback() which is passed to the wait queue wakeup and is
done very often under irq context, this patch does not touch this call.
Patches have been tested pretty heavily with the customer workload,
microbenchmarks, ltp testcases and two high level workloads that use epoll
under the hood: nginx and libevent benchmarks.
This patch (of 2):
Saving and restoring interrupts in ep_scan_ready_list() is an
overkill as it is never called with interrupts disabled. Loosen
this to simply disabling local irqs such that archs where managing
irqs is expensive or virtual environments. This patch yields
some throughput improvements on a workload that is epoll intensive
running on a single Xen DomU.
1 Job 7500 --> 8800 enq/s (+17%)
2 Jobs 14000 --> 15200 enq/s (+8%)
3 Jobs 20500 --> 22300 enq/s (+8%)
4 Jobs 25000 --> 28000 enq/s (+8-12)%
On bare metal:
For a 2-socket 40-core (ht) IvyBridge on a few workloads, unfortunately I
don't have a xen environment and the results for Xen I do have (which
numbers are in patch 1) I don't have the actual workload, so cannot
compare them directly.
1) Different configurations were used for a epoll_wait (pipes io)
microbench (http://linux-scalability.org/epoll/epoll-test.c) and shows
around a 7-10% improvement in overall total number of times the
epoll_wait() loops when using both regular and nested epolls, so very
raw numbers, but measurable nonetheless.
# threads vanilla dirty
1 1677717 1805587
2 1660510 1854064
4 1610184 1805484
8 1577696 1751222
16 1568837 1725299
32 1291532 1378463
64 752584 787368
Note that stddev is pretty small.
2) Another pipe test, which shows no real measurable improvement.
(http://www.xmailserver.org/linux-patches/pipetest.c)
Link: http://lkml.kernel.org/r/20180720172956.2883-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "waitqueue lockdep annotation", v3.
This series adds a strategic lockdep_assert_held to __wake_up_common to
ensure callers really do hold the wait_queue_head lock when calling the
unlocked wake_up variants. It turns out epoll did not do this for a
fairly common path (hit all the time by systemd during bootup), so the
second patch fixed this instance as well.
This patch (of 3):
The epoll code currently uses the unlocked waitqueue helpers for managing
ep->wq, but instead of holding the waitqueue lock around these calls, it
uses its own ep->lock spinlock. Given that the waitqueue is not exposed
to the rest of the kernel this actually works ok at the moment, but
prevents the epoll locking rules from being enforced using lockdep.
Remove ep->lock and use the waitqueue lock to not only reduce the size of
struct eventpoll but also to make sure we can assert locking invariants in
the waitqueue code.
Link: http://lkml.kernel.org/r/20171214152344.6880-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Baron <jbaron@akamai.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The poll() changes were not well thought out, and completely
unexplained. They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.
Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead. That gets rid of one of the new indirections.
But that doesn't fix the new complexity that is completely unwarranted
for the regular case. The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.
[ This revert is a revert of about 30 different commits, not reverted
individually because that would just be unnecessarily messy - Linus ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Ben Noordhuis <info@bnoordhuis.nl>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
These abstract out calls to the poll method in preparation for changes
in how we poll.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Using the helper functions do_epoll_create() and do_epoll_wait() allows us
to remove in-kernel calls to the related syscall functions.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
make it always return __poll_t and have its callbacks do the same
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
preparations for not mixing __poll_t and int in ep_scan_ready_list()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
two callers that do so don't need to bother - we'd already
masked it with epi->event.events, which
* couldn't have changed since we are holding ->mtx
* had been set to event->events
* is still equal to event->events, since *event is never
changed by anything.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__poll_t is also used as wait key in some waitqueues.
Verify that wait_..._poll() gets __poll_t as key and
provide a helper for wakeup functions to get back to
that __poll_t value.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Merge more updates from Andrew Morton:
- a bit more MM
- procfs updates
- dynamic-debug fixes
- lib/ updates
- checkpatch
- epoll
- nilfs2
- signals
- rapidio
- PID management cleanup and optimization
- kcov updates
- sysvipc updates
- quite a few misc things all over the place
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
EXPERT Kconfig menu: fix broken EXPERT menu
include/asm-generic/topology.h: remove unused parent_node() macro
arch/tile/include/asm/topology.h: remove unused parent_node() macro
arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro
arch/sh/include/asm/topology.h: remove unused parent_node() macro
arch/ia64/include/asm/topology.h: remove unused parent_node() macro
drivers/pcmcia/sa1111_badge4.c: avoid unused function warning
mm: add infrastructure for get_user_pages_fast() benchmarking
sysvipc: make get_maxid O(1) again
sysvipc: properly name ipc_addid() limit parameter
sysvipc: duplicate lock comments wrt ipc_addid()
sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE
initramfs: use time64_t timestamps
drivers/watchdog: make use of devm_register_reboot_notifier()
kernel/reboot.c: add devm_register_reboot_notifier()
kcov: update documentation
Makefile: support flag -fsanitizer-coverage=trace-cmp
kcov: support comparison operands collection
kcov: remove pointless current != NULL check
kernel/panic.c: add TAINT_AUX
...
|
|
The use of ep_call_nested() in ep_eventpoll_poll(), which is the .poll
routine for an epoll fd, is used to prevent excessively deep epoll
nesting, and to prevent circular paths.
However, we are already preventing these conditions during
EPOLL_CTL_ADD. In terms of too deep epoll chains, we do in fact allow
deep nesting of the epoll fds themselves (deeper than EP_MAX_NESTS),
however we don't allow more than EP_MAX_NESTS when an epoll file
descriptor is actually connected to a wakeup source. Thus, we do not
require the use of ep_call_nested(), since ep_eventpoll_poll(), which is
called via ep_scan_ready_list() only continues nesting if there are
events available.
Since ep_call_nested() is implemented using a global lock, applications
that make use of nested epoll can see large performance improvements
with this change.
Davidlohr said:
: Improvements are quite obscene actually, such as for the following
: epoll_wait() benchmark with 2 level nesting on a 80 core IvyBridge:
:
: ncpus vanilla dirty delta
: 1 2447092 3028315 +23.75%
: 4 231265 2986954 +1191.57%
: 8 121631 2898796 +2283.27%
: 16 59749 2902056 +4757.07%
: 32 26837 2326314 +8568.30%
: 64 12926 1341281 +10276.61%
:
: (http://linux-scalability.org/epoll/epoll-test.c)
Link: http://lkml.kernel.org/r/1509430214-5599-1-git-send-email-jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Salman Qazi <sqazi@google.com>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ep_poll_safewake() is used to wakeup potentially nested epoll file
descriptors. The function uses ep_call_nested() to prevent entering the
same wake up queue more than once, and to prevent excessively deep
wakeup paths (deeper than EP_MAX_NESTS). However, this is not necessary
since we are already preventing these conditions during EPOLL_CTL_ADD.
This saves extra function calls, and avoids taking a global lock during
the ep_call_nested() calls.
I have, however, left ep_call_nested() for the CONFIG_DEBUG_LOCK_ALLOC
case, since ep_call_nested() keeps track of the nesting level, and this
is required by the call to spin_lock_irqsave_nested(). It would be nice
to remove the ep_call_nested() calls for the CONFIG_DEBUG_LOCK_ALLOC
case as well, however its not clear how to simply pass the nesting level
through multiple wake_up() levels without more surgery. In any case, I
don't think CONFIG_DEBUG_LOCK_ALLOC is generally used for production.
This patch, also apparently fixes a workload at Google that Salman Qazi
reported by completely removing the poll_safewake_ncalls->lock from
wakeup paths.
Link: http://lkml.kernel.org/r/1507920533-8812-1-git-send-email-jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Salman Qazi <sqazi@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A userspace application can directly trigger the allocations from
eventpoll_epi and eventpoll_pwq slabs. A buggy or malicious application
can consume a significant amount of system memory by triggering such
allocations. Indeed we have seen in production where a buggy
application was leaking the epoll references and causing a burst of
eventpoll_epi and eventpoll_pwq slab allocations. This patch opt-in the
charging of eventpoll_epi and eventpoll_pwq slabs.
There is a per-user limit (~4% of total memory if no highmem) on these
caches. I think it is too generous particularly in the scenario where
jobs of multiple users are running on the system and the administrator
is reducing cost by overcomitting the memory. This is unaccounted
kernel memory and will not be considered by the oom-killer. I think by
accounting it to kmemcg, for systems with kmem accounting enabled, we
can provide better isolation between jobs of different users.
Link: http://lkml.kernel.org/r/20171003021519.23907-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
similar to put_compat_sigset()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... such that we can avoid the tree walks to get the node with the
smallest key. Semantically the same, as the previously used rb_first(),
but O(1). The main overhead is the extra footprint for the cached rb_node
pointer, which should not matter for epoll.
Link: http://lkml.kernel.org/r/20170719014603.19029-15-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The race was introduced by me in commit 971316f0503a ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead"). I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().
Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.
TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.
Hopefully this explains use-after-free reported by syzcaller:
BUG: KASAN: use-after-free in debug_spin_lock_before
...
_raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148
this is spin_lock(eventpoll->lock),
...
Freed by task 17774:
...
kfree+0xe8/0x2c0 mm/slub.c:3883
ep_free+0x22c/0x2a0 fs/eventpoll.c:865
Fixes: 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead")
Reported-by: 范龙飞 <long7573@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kcmp syscall is build iif CONFIG_CHECKPOINT_RESTORE is selected, so wrap
appropriate helpers in epoll code with the config to build it
conditionally.
Link: http://lkml.kernel.org/r/20170513083456.GG1881@uranus.lan
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reported-by: Andrew Morton <akpm@linuxfoundation.org>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With current epoll architecture target files are addressed with
file_struct and file descriptor number, where the last is not unique.
Moreover files can be transferred from another process via unix socket,
added into queue and closed then so we won't find this descriptor in the
task fdinfo list.
Thus to checkpoint and restore such processes CRIU needs to find out
where exactly the target file is present to add it into epoll queue.
For this sake one can use kcmp call where some particular target file
from the queue is compared with arbitrary file passed as an argument.
Because epoll target files can have same file descriptor number but
different file_struct a caller should explicitly specify the offset
within.
To test if some particular file is matching entry inside epoll one have
to
- fill kcmp_epoll_slot structure with epoll file descriptor,
target file number and target file offset (in case if only
one target is present then it should be 0)
- call kcmp as kcmp(pid1, pid2, KCMP_EPOLL_TFD, fd, &kcmp_epoll_slot)
- the kernel fetch file pointer matching file descriptor @fd of pid1
- lookups for file struct in epoll queue of pid2 and returns traditional
0,1,2 result for sorting purpose
Link: http://lkml.kernel.org/r/20170424154423.511592110@gmail.com
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since it is possbile to have same number in tfd field (say file added,
closed, then nother file dup'ed to same number and added back) it is
imposible to distinguish such target files solely by their numbers.
Strictly speaking regular applications don't need to recognize these
targets at all but for checkpoint/restore sake we need to collect
targets to be able to push them back on restore stage in a proper order.
Thus lets add file position, inode and device number where this target
lays. This three fields can be used as a primary key for sorting, and
together with kcmp help CRIU can find out an exact file target (from the
whole set of processes being checkpointed).
Link: http://lkml.kernel.org/r/20170424154423.436491881@gmail.com
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We've encountered zombies that are waiting for a thread to exit that are
looping in ep_poll() almost endlessly although there is a pending
SIGKILL as a result of a group exit.
This happens because we always find ep_events_available() and fetch more
events and never are able to check for signal_pending() that would break
from the loop and return -EINTR.
Special case fatal signals and break immediately to guarantee that we
loop to fetch more events and delay making a timely exit.
It would also be possible to simply move the check for signal_pending()
higher than checking for ep_events_available(), but there have been no
reports of delayed signal handling other than SIGKILL preventing zombies
from exiting that would be fixed by this.
It fixes an issue for us where we have witnessed zombies sticking around
for at least O(minutes), but considering the code has been like this
forever and nobody else has complained that I have found, I would simply
queue it up for 4.12.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705031722350.76784@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.
Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.
To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:
struct wait_queue_head::task_list => ::head
struct wait_queue_entry::task_list => ::entry
For example, this code:
rqw->wait.task_list.next != &wait->task_list
... is was pretty unclear (to me) what it's doing, while now it's written this way:
rqw->wait.head.next != &wait->entry
... which makes it pretty clear that we are iterating a list until we see the head.
Other examples are:
list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
list_for_each_entry(wq, &fence->wait.task_list, task_list) {
... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:
list_for_each_entry_safe(pos, next, &x->head, entry) {
list_for_each_entry(wq, &fence->wait.head, entry) {
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds busy poll support to epoll. The implementation is meant to
be opportunistic in that it will take the NAPI ID from the last socket
that is added to the ready list that contains a valid NAPI ID and it will
use that for busy polling until the ready list goes empty. Once the ready
list goes empty the NAPI ID is reset and busy polling is disabled until a
new socket is added to the ready list.
In addition when we insert a new socket into the epoll we record the NAPI
ID and assume we are going to receive events on it. If that doesn't occur
it will be evicted as the active NAPI ID and we will resume normal
behavior.
An application can use SO_INCOMING_CPU or SO_REUSEPORT_ATTACH_C/EBPF socket
options to spread the incoming connections to specific worker threads
based on the incoming queue. This enables epoll for each worker thread
to have only sockets that receive packets from a single queue. So when an
application calls epoll_wait() and there are no events available to report,
busy polling is done on the associated queue to pull the packets.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
<linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In case if epoll_ctl is called with operation EPOLL_CTL_DEL then
@epds.events variable allocated on stack may contain random bits which
we test then for EPOLLEXCLUSIVE. Since currently the test look like
if (epds.events & EPOLLEXCLUSIVE) {
if (op == EPOLL_CTL_MOD)
goto error_tgt_fput;
if (op == EPOLL_CTL_ADD && (is_file_epoll(tf.file) ||
(epds.events & ~EPOLLEXCLUSIVE_OK_BITS)))
goto error_tgt_fput;
}
Nothing serious will happen even if epds.events has this bit set, still
better to be on safe side and make sure that we're to test this bit at
all.
Link: http://lkml.kernel.org/r/20170214154935.GG1850@uranus.lan
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Vagin <avagin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
