summaryrefslogtreecommitdiffstats
path: root/fs/eventpoll.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19fs: poll/select/recvmmsg: use timespec64 for timeout eventsDeepa Dinamani1-6/+6
struct timespec is not y2038 safe. Even though timespec might be sufficient to represent timeouts, use struct timespec64 here as the plan is to get rid of all timespec reference in the kernel. The patch transitions the common functions: poll_select_set_timeout() and select_estimate_accuracy() to use timespec64. And, all the syscalls that use these functions are transitioned in the same patch. The restart block parameters for poll uses monotonic time. Use timespec64 here as well to assign timeout value. This parameter in the restart block need not change because this only holds the monotonic timestamp at which timeout should occur. And, unsigned long data type should be big enough for this timestamp. The system call interfaces will be handled in a separate series. Compat interfaces need not change as timespec64 is an alias to struct timespec on a 64 bit system. Link: http://lkml.kernel.org/r/1461947989-21926-3-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17timer: convert timer_slack_ns from unsigned long to u64John Stultz1-1/+1
This patchset introduces a /proc/<pid>/timerslack_ns interface which would allow controlling processes to be able to set the timerslack value on other processes in order to save power by avoiding wakeups (Something Android currently does via out-of-tree patches). The first patch tries to fix the internal timer_slack_ns usage which was defined as a long, which limits the slack range to ~4 seconds on 32bit systems. It converts it to a u64, which provides the same basically unlimited slack (500 years) on both 32bit and 64bit machines. The second patch introduces the /proc/<pid>/timerslack_ns interface which allows the full 64bit slack range for a task to be read or set on both 32bit and 64bit machines. With these two patches, on a 32bit machine, after setting the slack on bash to 10 seconds: $ time sleep 1 real 0m10.747s user 0m0.001s sys 0m0.005s The first patch is a little ugly, since I had to chase the slack delta arguments through a number of functions converting them to u64s. Let me know if it makes sense to break that up more or not. Other than that things are fairly straightforward. This patch (of 2): The timer_slack_ns value in the task struct is currently a unsigned long. This means that on 32bit applications, the maximum slack is just over 4 seconds. However, on 64bit machines, its much much larger (~500 years). This disparity could make application development a little (as well as the default_slack) to a u64. This means both 32bit and 64bit systems have the same effective internal slack range. Now the existing ABI via PR_GET_TIMERSLACK and PR_SET_TIMERSLACK specify the interface as a unsigned long, so we preserve that limitation on 32bit systems, where SET_TIMERSLACK can only set the slack to a unsigned long value, and GET_TIMERSLACK will return ULONG_MAX if the slack is actually larger then what can be stored by an unsigned long. This patch also modifies hrtimer functions which specified the slack delta as a unsigned long. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oren Laadan <orenl@cellrox.com> Cc: Ruchi Kandoi <kandoiruchi@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUTJason Baron1-6/+32
In the current implementation of the EPOLLEXCLUSIVE flag (added for 4.5-rc1), if epoll waiters create different POLL* sets and register them as exclusive against the same target fd, the current implementation will stop waking any further waiters once it finds the first idle waiter. This means that waiters could miss wakeups in certain cases. For example, when we wake up a pipe for reading we do: wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if one epoll set or epfd is added to pipe p with POLLIN and a second set epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the wakeup since the current implementation will stop after it finds any intersection of events with a waiter that is blocked in epoll_wait(). We could potentially address this by requiring all epoll waiters that are added to p be required to pass the same set of POLL* events. IE the first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL* flags to be used by any other epfds that are added as EPOLLEXCLUSIVE. However, I think it might be somewhat confusing interface as we would have to reference count the number of users for that set, and so userspace would have to keep track of that count, or we would need a more involved interface. It also adds some shared state that we'd have store somewhere. I don't think anybody will want to bloat __wait_queue_head for this. I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE such that it can only be specified with EPOLLIN and/or EPOLLOUT. So that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop once we hit the first idle waiter that specifies the EPOLLIN bit, since any remaining waiters that only have 'POLLOUT' set wouldn't need to be woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the wake bit set (there is at least one example of this I saw in fs/pipe.c), then we just wake the entire exclusive list. Having both 'POLLOUT' and 'POLLIN' both set should not be on any performance critical path, so I think that's ok (in fs/pipe.c its in pipe_release()). We also continue to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus, the user can specify EPOLLERR and/or EPOLLHUP but is not required to do so. Since epoll waiters may be interested in other events as well besides EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by doing a 'dup' call on the target fd and adding that as one normally would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT events are what we are interest in balancing, I think that the 'dup' thing could perhaps be added to only one of the waiter threads. However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be sufficient for the majority of use-cases. Since EPOLLEXCLUSIVE is intended to be used with a target fd shared among multiple epfds, where between 1 and n of the epfds may receive an event, it does not satisfy the semantics of EPOLLONESHOT where only 1 epfd would get an event. Thus, it is not allowed to be specified in conjunction with EPOLLEXCLUSIVE. EPOLL_CTL_MOD is also not allowed if the fd was previously added as EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as interesting, but this could be relaxed at some further point. Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Madars Vitolins <m@silodev.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20epoll: add EPOLLEXCLUSIVE flagJason Baron1-3/+21
Currently, epoll file descriptors or epfds (the fd returned from epoll_create[1]()) that are added to a shared wakeup source are always added in a non-exclusive manner. This means that when we have multiple epfds attached to a shared fd source they are all woken up. This creates thundering herd type behavior. Introduce a new 'EPOLLEXCLUSIVE' flag that can be passed as part of the 'event' argument during an epoll_ctl() EPOLL_CTL_ADD operation. This new flag allows for exclusive wakeups when there are multiple epfds attached to a shared fd event source. The implementation walks the list of exclusive waiters, and queues an event to each epfd, until it finds the first waiter that has threads blocked on it via epoll_wait(). The idea is to search for threads which are idle and ready to process the wakeup events. Thus, we queue an event to at least 1 epfd, but may still potentially queue an event to all epfds that are attached to the shared fd source. Performance testing was done by Madars Vitolins using a modified version of Enduro/X. The use of the 'EPOLLEXCLUSIVE' flag reduce the length of this particular workload from 860s down to 24s. Sample epoll_clt text: EPOLLEXCLUSIVE Sets an exclusive wakeup mode for the epfd file descriptor that is being attached to the target file descriptor, fd. Thus, when an event occurs and multiple epfd file descriptors are attached to the same target file using EPOLLEXCLUSIVE, one or more epfds will receive an event with epoll_wait(2). The default in this scenario (when EPOLLEXCLUSIVE is not set) is for all epfds to receive an event. EPOLLEXCLUSIVE may only be specified with the op EPOLL_CTL_ADD. Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Madars Vitolins <m@silodev.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13epoll: optimize setting task running after blockingDavidlohr Bueso1-2/+2
After waking up a task waiting for an event, we explicitly mark it as TASK_RUNNING (which is necessary as we do the checks for wakeups as TASK_INTERRUPTIBLE). Once running and dealing with actually delivering the events, we're obviously not planning on calling schedule, thus we can relax the implied barrier and simply update the state with __set_current_state(). Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-05fs: Convert show_fdinfo functions to voidJoe Perches1-8/+5
seq_printf functions shouldn't really check the return value. Checking seq_has_overflowed() occasionally is used instead. Update vfs documentation. Link: http://lkml.kernel.org/p/e37e6e7b76acbdcc3bb4ab2a57c8f8ca1ae11b9a.1412031505.git.joe@perches.com Cc: David S. Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Joe Perches <joe@perches.com> [ did a few clean ups ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-10eventpoll: fix uninitialized variable in epoll_ctlNicolas Iooss1-1/+2
When calling epoll_ctl with operation EPOLL_CTL_DEL, structure epds is not initialized but ep_take_care_of_epollwakeup reads its event field. When this unintialized field has EPOLLWAKEUP bit set, a capability check is done for CAP_BLOCK_SUSPEND in ep_take_care_of_epollwakeup. This produces unexpected messages in the audit log, such as (on a system running SELinux): type=AVC msg=audit(1408212798.866:410): avc: denied { block_suspend } for pid=7754 comm="dbus-daemon" capability=36 scontext=unconfined_u:unconfined_r:unconfined_t tcontext=unconfined_u:unconfined_r:unconfined_t tclass=capability2 permissive=1 type=SYSCALL msg=audit(1408212798.866:410): arch=c000003e syscall=233 success=yes exit=0 a0=3 a1=2 a2=9 a3=7fffd4d66ec0 items=0 ppid=1 pid=7754 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" subj=unconfined_u:unconfined_r:unconfined_t key=(null) ("arch=c000003e syscall=233 a1=2" means "epoll_ctl(op=EPOLL_CTL_DEL)") Remove use of epds in epoll_ctl when op == EPOLL_CTL_DEL. Fixes: 4d7e30d98939 ("epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arve Hjønnevåg <arve@android.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-16epoll: fix use-after-free in eventpoll_release_fileKonstantin Khlebnikov1-2/+2
This fixes use-after-free of epi->fllink.next inside list loop macro. This loop actually releases elements in the body. The list is rcu-protected but here we cannot hold rcu_read_lock because we need to lock mutex inside. The obvious solution is to use list_for_each_entry_safe(). RCU-ness isn't essential because nobody can change this list under us, it's final fput for this file. The bug was introduced by ae10b2b4eb01 ("epoll: optimize EPOLL_CTL_DEL using rcu") Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Stable <stable@vger.kernel.org> # 3.13+ Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06fs: convert use of typedef ctl_table to struct ctl_tableJoe Perches1-1/+1
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02epoll: do not take the nested ep->mtx on EPOLL_CTL_DELJason Baron1-4/+0
The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock. That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with epoll_ctl(b, EPOLL_CTL_DEL, a, x). The deadlock was introduced with commmit 67347fe4e632 ("epoll: do not take global 'epmutex' for simple topologies"). The acquistion of the ep->mtx for the destination 'ep' was added such that a concurrent EPOLL_CTL_ADD operation would see the correct state of the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links') However, by simply not acquiring the lock, we do not serialize behind the ep->mtx from the add path, and thus may perform a full path check when if we had waited a little longer it may not have been necessary. However, this is a transient state, and performing the full loop checking in this case is not harmful. The important point is that we wouldn't miss doing the full loop checking when required, since EPOLL_CTL_ADD always locks any 'ep's that its operating upon. The reason we don't need to do lock ordering in the add path, is that we are already are holding the global 'epmutex' whenever we do the double lock. Further, the original posting of this patch, which was tested for the intended performance gains, did not perform this additional locking. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-03epoll: drop EPOLLWAKEUP if PM_SLEEP is disabledAmit Pundir1-2/+1
Drop EPOLLWAKEUP from epoll events mask if CONFIG_PM_SLEEP is disabled. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-13Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds1-47/+98
Merge first patch-bomb from Andrew Morton: "Quite a lot of other stuff is banked up awaiting further next->mainline merging, but this batch contains: - Lots of random misc patches - OCFS2 - Most of MM - backlight updates - lib/ updates - printk updates - checkpatch updates - epoll tweaking - rtc updates - hfs - hfsplus - documentation - procfs - update gcov to gcc-4.7 format - IPC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits) ipc, msg: fix message length check for negative values ipc/util.c: remove unnecessary work pending test devpts: plug the memory leak in kill_sb ./Makefile: export initial ramdisk compression config option init/Kconfig: add option to disable kernel compression drivers: w1: make w1_slave::flags long to avoid memory corruption drivers/w1/masters/ds1wm.cuse dev_get_platdata() drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page() drivers/memstick/core/mspro_block.c: fix attributes array allocation drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr kernel/panic.c: reduce 1 byte usage for print tainted buffer gcov: reuse kbasename helper kernel/gcov/fs.c: use pr_warn() kernel/module.c: use pr_foo() gcov: compile specific gcov implementation based on gcc version gcov: add support for gcc 4.7 gcov format gcov: move gcov structs definitions to a gcc version specific file kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener() kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end() kernel/sysctl_binary.c: use scnprintf() instead of snprintf() ...
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-11-13epoll: do not take global 'epmutex' for simple topologiesJason Baron1-26/+69
When calling EPOLL_CTL_ADD for an epoll file descriptor that is attached directly to a wakeup source, we do not need to take the global 'epmutex', unless the epoll file descriptor is nested. The purpose of taking the 'epmutex' on add is to prevent complex topologies such as loops and deep wakeup paths from forming in parallel through multiple EPOLL_CTL_ADD operations. However, for the simple case of an epoll file descriptor attached directly to a wakeup source (with no nesting), we do not need to hold the 'epmutex'. This patch along with 'epoll: optimize EPOLL_CTL_DEL using rcu' improves scalability on larger systems. Quoting Nathan Zimmer's mail on SPECjbb performance: "On the 16 socket run the performance went from 35k jOPS to 125k jOPS. In addition the benchmark when from scaling well on 10 sockets to scaling well on just over 40 sockets. ... Currently the benchmark stops scaling at around 40-44 sockets but it seems like I found a second unrelated bottleneck." [akpm@linux-foundation.org: use `bool' for boolean variables, remove unneeded/undesirable cast of void*, add missed ep_scan_ready_list() kerneldoc] Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13epoll: optimize EPOLL_CTL_DEL using rcuJason Baron1-24/+32
Nathan Zimmer found that once we get over 10+ cpus, the scalability of SPECjbb falls over due to the contention on the global 'epmutex', which is taken in on EPOLL_CTL_ADD and EPOLL_CTL_DEL operations. Patch #1 removes the 'epmutex' lock completely from the EPOLL_CTL_DEL path by using rcu to guard against any concurrent traversals. Patch #2 remove the 'epmutex' lock from EPOLL_CTL_ADD operations for simple topologies. IE when adding a link from an epoll file descriptor to a wakeup source, where the epoll file descriptor is not nested. This patch (of 2): Optimize EPOLL_CTL_DEL such that it does not require the 'epmutex' by converting the file->f_ep_links list into an rcu one. In this way, we can traverse the epoll network on the add path in parallel with deletes. Since deletes can't create loops or worse wakeup paths, this is safe. This patch in combination with the patch "epoll: Do not take global 'epmutex' for simple topologies", shows a dramatic performance improvement in scalability for SPECjbb. Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> CC: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Revert "epoll: use freezable blocking call"Rafael J. Wysocki1-3/+1
This reverts commit 1c441e921201 (epoll: use freezable blocking call) which is reported to cause user space memory corruption to happen after suspend to RAM. Since it appears to be extremely difficult to root cause this problem, it is best to revert the offending commit and try to address the original issue in a better way later. References: https://bugzilla.kernel.org/show_bug.cgi?id=61781 Reported-by: Natrio <natrio@list.ru> Reported-by: Jeff Pohlmeyer <yetanothergeek@gmail.com> Bisected-by: Leo Wolf <jclw@ymail.com> Fixes: 1c441e921201 (epoll: use freezable blocking call) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
2013-10-24file->f_op is never NULL...Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-11epoll: add a reschedule point in ep_free()Eric Dumazet1-0/+2
ep_free() might iterate on a huge set of epitems and hold cpu too long. Add two cond_resched() in order to yield cpu to other tasks. This is safe as we only hold mutexes in this function. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-03switch epoll_ctl() to fdgetAl Viro1-16/+15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-03Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds1-6/+6
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
2013-07-03signals: eventpoll: do not use sigprocmask()Oleg Nesterov1-6/+6
sigprocmask() should die. None of the current callers actually need this strange interface. Change fs/eventpoll.c to use set_current_blocked(). This also means we should not worry about SIGKILL/SIGSTOP. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-12epoll: use freezable blocking callColin Cross1-1/+3
Avoid waking up every thread sleeping in an epoll_wait call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-0/+47
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull compat cleanup from Al Viro: "Mostly about syscall wrappers this time; there will be another pile with patches in the same general area from various people, but I'd rather push those after both that and vfs.git pile are in." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: syscalls.h: slightly reduce the jungles of macros get rid of union semop in sys_semctl(2) arguments make do_mremap() static sparc: no need to sign-extend in sync_file_range() wrapper ppc compat wrappers for add_key(2) and request_key(2) are pointless x86: trim sys_ia32.h x86: sys32_kill and sys32_mprotect are pointless get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC merge compat sys_ipc instances consolidate compat lookup_dcookie() convert vmsplice to COMPAT_SYSCALL_DEFINE switch getrusage() to COMPAT_SYSCALL_DEFINE switch epoll_pwait to COMPAT_SYSCALL_DEFINE convert sendfile{,64} to COMPAT_SYSCALL_DEFINE switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect make HAVE_SYSCALL_WRAPPERS unconditional consolidate cond_syscall and SYSCALL_ALIAS declarations teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long get rid of duplicate logics in __SC_....[1-6] definitions
2013-04-30epoll: cleanup: use RCU_INIT_POINTER when nullingEric Wong1-1/+1
It is always safe to use RCU_INIT_POINTER to NULL a pointer. This results in slightly smaller/faster code. Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30epoll: cleanup: hoist out f_op->poll callsEric Wong1-10/+12
This reduces the amount of code inside the ready list iteration loops for better readability IMHO. Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30epoll: lock ep->mtx in ep_free to silence lockdepEric Wong1-0/+4
Technically we do not need to hold ep->mtx during ep_free since we are certain there are no other users of ep at that point. However, lockdep complains with a "suspicious rcu_dereference_check() usage!" message; so lock the mutex before ep_remove to silence the warning. Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arve Hjønnevåg <arve@android.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: NeilBrown <neilb@suse.de>, Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30epoll: use RCU to protect wakeup_source in epitemEric Wong1-21/+71
This prevents wakeup_source destruction when a user hits the item with EPOLL_CTL_MOD while ep_poll_callback is running. Tested with CONFIG_SPARSE_RCU_POINTER=y and "make fs/eventpoll.o C=2" Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arve Hjønnevåg <arve@android.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: NeilBrown <neilb@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30epoll: trim epitem by one cache lineEric Wong1-1/+9
It is common for epoll users to have thousands of epitems, so saving a cache line on every allocation leads to large memory savings. Since epitem allocations are cache-aligned, reducing sizeof(struct epitem) from 136 bytes to 128 bytes will allow it to squeeze under a cache line boundary on x86_64. Via /sys/kernel/slab/eventpoll_epi, I see the following changes on my x86_64 Core2 Duo (which has 64-byte cache alignment): object_size : 192 => 128 objs_per_slab: 21 => 32 Also, add a BUILD_BUG_ON() to check for future accidental breakage. [akpm@linux-foundation.org: use __packed, for all architectures] Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03switch epoll_pwait to COMPAT_SYSCALL_DEFINEAl Viro1-0/+47
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-02epoll: prevent missed events on EPOLL_CTL_MODEric Wong1-1/+21
EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to ensure events are not missed. Since the modifications to the interest mask are not protected by the same lock as ep_poll_callback, we need to ensure the change is visible to other CPUs calling ep_poll_callback. We also need to ensure f_op->poll() has an up-to-date view of past events which occured before we modified the interest mask. So this barrier also pairs with the barrier in wq_has_sleeper(). This should guarantee either ep_poll_callback or f_op->poll() (or both) will notice the readiness of a recently-ready/modified item. This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in: http://thread.gmane.org/gmane.linux.kernel/1408782/ Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Voellmy <andreas.voellmy@yale.edu> Tested-by: "Junchang(Jason) Wang" <junchang.wang@yale.edu> Cc: netdev@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17fs, epoll: add procfs fdinfo helperCyrill Gorcunov1-0/+28
This allows us to print out eventpoll target file descriptor, events and data, the /proc/pid/fdinfo/fd consists of | pos: 0 | flags: 02 | tfd: 5 events: 1d data: ffffffffffffffff enabled: 1 [avagin@: fix for unitialized ret variable] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: James Bottomley <jbottomley@parallels.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Helsley <matt.helsley@gmail.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-09revert "epoll: support for disabling items, and a self-test app"Andrew Morton1-35/+3
Revert commit 03a7beb55b9f ("epoll: support for disabling items, and a self-test app") pending resolution of the issues identified by Michael Kerrisk, copied below. We'll revisit this for 3.8. : I've taken a look at this patch as it currently stands in 3.7-rc1, and : done a bit of testing. (By the way, the test program : tools/testing/selftests/epoll/test_epoll.c does not compile...) : : There are one or two places where the behavior seems a little strange, : so I have a question or two at the end of this mail. But other than : that, I want to check my understanding so that the interface can be : correctly documented. : : Just to go though my understanding, the problem is the following : scenario in a multithreaded application: : : 1. Multiple threads are performing epoll_wait() operations, : and maintaining a user-space cache that contains information : corresponding to each file descriptor being monitored by : epoll_wait(). : : 2. At some point, a thread wants to delete (EPOLL_CTL_DEL) : a file descriptor from the epoll interest list, and : delete the corresponding record from the user-space cache. : : 3. The problem with (2) is that some other thread may have : previously done an epoll_wait() that retrieved information : about the fd in question, and may be in the middle of using : information in the cache that relates to that fd. Thus, : there is a potential race. : : 4. The race can't solved purely in user space, because doing : so would require applying a mutex across the epoll_wait() : call, which would of course blow thread concurrency. : : Right? : : Your solution is the EPOLL_CTL_DISABLE operation. I want to : confirm my understanding about how to use this flag, since : the description that has accompanied the patches so far : has been a bit sparse : : 0. In the scenario you're concerned about, deleting a file : descriptor means (safely) doing the following: : (a) Deleting the file descriptor from the epoll interest list : using EPOLL_CTL_DEL : (b) Deleting the corresponding record in the user-space cache : : 1. It's only meaningful to use this EPOLL_CTL_DISABLE in : conjunction with EPOLLONESHOT. : : 2. Using EPOLL_CTL_DISABLE without using EPOLLONESHOT in : conjunction is a logical error. : : 3. The correct way to code multithreaded applications using : EPOLL_CTL_DISABLE and EPOLLONESHOT is as follows: : : a. All EPOLL_CTL_ADD and EPOLL_CTL_MOD operations should : should EPOLLONESHOT. : : b. When a thread wants to delete a file descriptor, it : should do the following: : : [1] Call epoll_ctl(EPOLL_CTL_DISABLE) : [2] If the return status from epoll_ctl(EPOLL_CTL_DISABLE) : was zero, then the file descriptor can be safely : deleted by the thread that made this call. : [3] If the epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY, : then the descriptor is in use. In this case, the calling : thread should set a flag in the user-space cache to : indicate that the thread that is using the descriptor : should perform the deletion operation. : : Is all of the above correct? : : The implementation depends on checking on whether : (events & ~EP_PRIVATE_BITS) == 0 : This replies on the fact that EPOLL_CTL_AD and EPOLL_CTL_MOD always : set EPOLLHUP and EPOLLERR in the 'events' mask, and EPOLLONESHOT : causes those flags (as well as all others in ~EP_PRIVATE_BITS) to be : cleared. : : A corollary to the previous paragraph is that using EPOLL_CTL_DISABLE : is only useful in conjunction with EPOLLONESHOT. However, as things : stand, one can use EPOLL_CTL_DISABLE on a file descriptor that does : not have EPOLLONESHOT set in 'events' This results in the following : (slightly surprising) behavior: : : (a) The first call to epoll_ctl(EPOLL_CTL_DISABLE) returns 0 : (the indicator that the file descriptor can be safely deleted). : (b) The next call to epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY. : : This doesn't seem particularly useful, and in fact is probably an : indication that the user made a logic error: they should only be using : epoll_ctl(EPOLL_CTL_DISABLE) on a file descriptor for which : EPOLLONESHOT was set in 'events'. If that is correct, then would it : not make sense to return an error to user space for this case? Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paton J. Lewis" <palewis@adobe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06epoll: support for disabling items, and a self-test appPaton J. Lewis1-3/+35
Enhanced epoll_ctl to support EPOLL_CTL_DISABLE, which disables an epoll item. If epoll_ctl doesn't return -EBUSY in this case, it is then safe to delete the epoll item in a multi-threaded environment. Also added a new test_epoll self- test app to both demonstrate the need for this feature and test it. Signed-off-by: Paton J. Lewis <palewis@adobe.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Holland <pholland@adobe.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-26switch simple cases of fget_light to fdgetAl Viro1-15/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26switch epoll_wait(2) to fget_light()Al Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-22eventpoll: use-after-possible-free in epoll_create1()Al Viro1-1/+1
As soon as we'd installed the file into descriptor table, it can get closed by another thread. Freeing ep in process... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-17PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPENDMichael Kerrisk1-1/+1
As discussed in http://thread.gmane.org/gmane.linux.kernel/1249726/focus=1288990, the capability introduced in 4d7e30d98939a0340022ccd49325a3d70f7e0238 to govern EPOLLWAKEUP seems misnamed: this capability is about governing the ability to suspend the system, not using a particular API flag (EPOLLWAKEUP). We should make the name of the capability more general to encourage reuse in related cases. (Whether or not this capability should also be used to govern the use of /sys/power/wake_lock is a question that needs to be separately resolved.) This patch renames the capability to CAP_BLOCK_SUSPEND. In order to ensure that the old capability name doesn't make it out into the wild, could you please apply and push up the tree to ensure that it is incorporated for the 3.5 release. Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-01HAVE_RESTORE_SIGMASK is defined on all architectures nowAl Viro1-4/+0
Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK and picks default set_restore_sigmask() in linux/thread_info.h. Kill the ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones get merged. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22epoll: Fix user space breakage related to EPOLLWAKEUPRafael J. Wysocki1-1/+1
Commit 4d7e30d (epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready) caused some applications to malfunction, because they set the bit corresponding to the new EPOLLWAKEUP flag in their eventpoll flags and they don't have the new CAP_EPOLLWAKEUP capability. To prevent that from happening, change epoll_ctl() to clear EPOLLWAKEUP in epds.events if the caller doesn't have the CAP_EPOLLWAKEUP capability instead of failing and returning an error code, which allows the affected applications to function normally. Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are readyArve Hjønnevåg1-3/+87
When an epoll_event, that has the EPOLLWAKEUP flag set, is ready, a wakeup_source will be active to prevent suspend. This can be used to handle wakeup events from a driver that support poll, e.g. input, if that driver wakes up the waitqueue passed to epoll before allowing suspend. Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-25epoll: clear the tfile_check_list on -ELOOPJason Baron1-1/+3
An epoll_ctl(,EPOLL_CTL_ADD,,) operation can return '-ELOOP' to prevent circular epoll dependencies from being created. However, in that case we do not properly clear the 'tfile_check_list'. Thus, add a call to clear_tfile_check_list() for the -ELOOP case. Signed-off-by: Jason Baron <jbaron@redhat.com> Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Davide Libenzi <davidel@xmailserver.org> Tested-by: Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-23epoll: remove unneeded variable in reverse_path_check()Dan Carpenter1-2/+0
We never use the length variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23epoll: comment the funky #ifdefSteven Rostedt1-0/+25
Looking for a bug in -rt, I stumbled across this code here from: commit 2dfa4eeab0fc ("epoll keyed wakeups: teach epoll about hints coming with the wakeup key"), specifically: #ifdef CONFIG_DEBUG_LOCK_ALLOC static inline void ep_wake_up_nested(wait_queue_head_t *wqueue, unsigned long events, int subclass) { unsigned long flags; spin_lock_irqsave_nested(&wqueue->lock, flags, subclass); wake_up_locked_poll(wqueue, events); spin_unlock_irqrestore(&wqueue->lock, flags); } #else static inline void ep_wake_up_nested(wait_queue_head_t *wqueue, unsigned long events, int subclass) { wake_up_poll(wqueue, events); } #endif You change the function of ep_wake_up_nested() depending on whether CONFIG_DEBUG_LOCK_ALLOC is set or not. This looks awfully suspicious, and there's no comment to explain why. I initially thought that this was trying to fool lockdep, and hiding a real bug. Investigating it, I found the creation of wake_up_nested() (which no longer exists) but was created for the sole purpose of epoll and its strange wake ups, as explained in commit 0ccf831cbee9 ("lockdep: annotate epoll") Although the commit message says "annotate epoll" the change log is much better at explaining what is happening than what is in the actual code. Thus a comment is really necessary here. And to save the time of other developers from having to go trudging through the git logs trying to figure out why this code exists. I took parts of the change log and placed it into a comment above the affected code. This will make the description of what is happening more visible to new developers that have to look at this code for the first time. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23poll: add poll_requested_events() and poll_does_not_wait() functionsHans Verkuil1-3/+15
In some cases the poll() implementation in a driver has to do different things depending on the events the caller wants to poll for. An example is when a driver needs to start a DMA engine if the caller polls for POLLIN, but doesn't want to do that if POLLIN is not requested but instead only POLLOUT or POLLPRI is requested. This is something that can happen in the video4linux subsystem among others. Unfortunately, the current epoll/poll/select implementation doesn't provide that information reliably. The poll_table_struct does have it: it has a key field with the event mask. But once a poll() call matches one or more bits of that mask any following poll() calls are passed a NULL poll_table pointer. Also, the eventpoll implementation always left the key field at ~0 instead of using the requested events mask. This was changed in eventpoll.c so the key field now contains the actual events that should be polled for as set by the caller. The solution to the NULL poll_table pointer is to set the qproc field to NULL in poll_table once poll() matches the events, not the poll_table pointer itself. That way drivers can obtain the mask through a new poll_requested_events inline. The poll_table_struct can still be NULL since some kernel code calls it internally (netfs_state_poll() in ./drivers/staging/pohmelfs/netfs.h). In that case poll_requested_events() returns ~0 (i.e. all events). Very rarely drivers might want to know whether poll_wait will actually wait. If another earlier file descriptor in the set already matched the events the caller wanted to wait for, then the kernel will return from the select() call without waiting. This might be useful information in order to avoid doing expensive work. A new helper function poll_does_not_wait() is added that drivers can use to detect this situation. This is now used in sock_poll_wait() in include/net/sock.h. This was the only place in the kernel that needed this information. Drivers should no longer access any of the poll_table internals, but use the poll_requested_events() and poll_does_not_wait() access functions instead. In order to enforce that the poll_table fields are now prepended with an underscore and a comment was added warning against using them directly. This required a change in unix_dgram_poll() in unix/af_unix.c which used the key field to get the requested events. It's been replaced by a call to poll_requested_events(). For qproc it was especially important to change its name since the behavior of that field changes with this patch since this function pointer can now be NULL when that wasn't possible in the past. Any driver accessing the qproc or key fields directly will now fail to compile. Some notes regarding the correctness of this patch: the driver's poll() function is called with a 'struct poll_table_struct *wait' argument. This pointer may or may not be NULL, drivers can never rely on it being one or the other as that depends on whether or not an earlier file descriptor in the select()'s fdset matched the requested events. There are only three things a driver can do with the wait argument: 1) obtain the key field: events = wait ? wait->key : ~0; This will still work although it should be replaced with the new poll_requested_events() function (which does exactly the same). This will now even work better, since wait is no longer set to NULL unnecessarily. 2) use the qproc callback. This could be deadly since qproc can now be NULL. Renaming qproc should prevent this from happening. There are no kernel drivers that actually access this callback directly, BTW. 3) test whether wait == NULL to determine whether poll would return without waiting. This is no longer sufficient as the correct test is now wait == NULL || wait->_qproc == NULL. However, the worst that can happen here is a slight performance hit in the case where wait != NULL and wait->_qproc == NULL. In that case the driver will assume that poll_wait() will actually add the fd to the set of waiting file descriptors. Of course, poll_wait() will not do that since it tests for wait->_qproc. This will not break anything, though. There is only one place in the whole kernel where this happens (sock_poll_wait() in include/net/sock.h) and that code will be replaced by a call to poll_does_not_wait() in the next patch. Note that even if wait->_qproc != NULL drivers cannot rely on poll_wait() actually waiting. The next file descriptor from the set might match the event mask and thus any possible waits will never happen. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-18Don't limit non-nested epoll pathsJason Baron1-0/+4
Commit 28d82dc1c4ed ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578 Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24epoll: ep_unregister_pollwait() can use the freed pwq->wheadOleg Nesterov1-3/+27
signalfd_cleanup() ensures that ->signalfd_wqh is not used, but this is not enough. eppoll_entry->whead still points to the memory we are going to free, ep_unregister_pollwait()->remove_wait_queue() is obviously unsafe. Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL, change ep_unregister_pollwait() to check pwq->whead != NULL under rcu_read_lock() before remove_wait_queue(). We add the new helper, ep_remove_wait_queue(), for this. This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because ->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand. ep_unregister_pollwait()->remove_wait_queue() can play with already freed and potentially reused ->sighand, but this is fine. This memory must have the valid ->signalfd_wqh until rcu_read_unlock(). Reported-by: Maxime Bizon <mbizon@freebox.fr> Cc: <stable@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()Oleg Nesterov1-0/+4
This patch is intentionally incomplete to simplify the review. It ignores ep_unregister_pollwait() which plays with the same wqh. See the next change. epoll assumes that the EPOLL_CTL_ADD'ed file controls everything f_op->poll() needs. In particular it assumes that the wait queue can't go away until eventpoll_release(). This is not true in case of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand which is not connected to the file. This patch adds the special event, POLLFREE, currently only for epoll. It expects that init_poll_funcptr()'ed hook should do the necessary cleanup. Perhaps it should be defined as EPOLLFREE in eventpoll. __cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if ->signalfd_wqh is not empty, we add the new signalfd_cleanup() helper. ep_poll_callback(POLLFREE) simply does list_del_init(task_list). This make this poll entry inconsistent, but we don't care. If you share epoll fd which contains our sigfd with another process you should blame yourself. signalfd is "really special". I simply do not know how we can define the "right" semantics if it used with epoll. The main problem is, epoll calls signalfd_poll() once to establish the connection with the wait queue, after that signalfd_poll(NULL) returns the different/inconsistent results depending on who does EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd has nothing to do with the file, it works with the current thread. In short: this patch is the hack which tries to fix the symptoms. It also assumes that nobody can take tasklist_lock under epoll locks, this seems to be true. Note: - we do not have wake_up_all_poll() but wake_up_poll() is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE. - signalfd_cleanup() uses POLLHUP along with POLLFREE, we need a couple of simple changes in eventpoll.c to make sure it can't be "lost". Reported-by: Maxime Bizon <mbizon@freebox.fr> Cc: <stable@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>