| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the 1st NONHEAD lcluster of a pcluster isn't CBLKCNT lcluster type
rather than a HEAD or PLAIN type instead, which means its pclustersize
_must_ be 1 lcluster (since its uncompressed size < 2 lclusters),
as illustrated below:
HEAD HEAD / PLAIN lcluster type
____________ ____________
|_:__________|_________:__| file data (uncompressed)
. .
.____________.
|____________| pcluster data (compressed)
Such on-disk case was explained before [1] but missed to be handled
properly in the runtime implementation.
It can be observed if manually generating 1 lcluster-sized pcluster
with 2 lclusters (thus CBLKCNT doesn't exist.) Let's fix it now.
[1] https://lore.kernel.org/r/20210407043927.10623-1-xiang@kernel.org
Link: https://lore.kernel.org/r/20210510064715.29123-1-xiang@kernel.org
Fixes: cec6e93beadf ("erofs: support parsing big pcluster compress indexes")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <xiang@kernel.org>
|
|
Enable COMPR_CFGS and BIG_PCLUSTER since the implementations are
all settled properly.
Link: https://lore.kernel.org/r/20210407043927.10623-11-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Prior to big pcluster, there was only one compressed page so it'd
easy to map this. However, when big pcluster is enabled, more work
needs to be done to handle multiple compressed pages. In detail,
- (maptype 0) if there is only one compressed page + no need
to copy inplace I/O, just map it directly what we did before;
- (maptype 1) if there are more compressed pages + no need to
copy inplace I/O, vmap such compressed pages instead;
- (maptype 2) if inplace I/O needs to be copied, use per-CPU
buffers for decompression then.
Another thing is how to detect inplace decompression is feasable or
not (it's still quite easy for non big pclusters), apart from the
inplace margin calculation, inplace I/O page reusing order is also
needed to be considered for each compressed page. Currently, if the
compressed page is the xth page, it shouldn't be reused as [0 ...
nrpages_out - nrpages_in + x], otherwise a full copy will be triggered.
Although there are some extra optimization ideas for this, I'd like
to make big pcluster work correctly first and obviously it can be
further optimized later since it has nothing with the on-disk format
at all.
Link: https://lore.kernel.org/r/20210407043927.10623-10-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Different from non-compact indexes, several lclusters are packed
as the compact form at once and an unique base blkaddr is stored for
each pack, so each lcluster index would take less space on avarage
(e.g. 2 bytes for COMPACT_2B.) btw, that is also why BIG_PCLUSTER
switch should be consistent for compact head0/1.
Prior to big pcluster, the size of all pclusters was 1 lcluster.
Therefore, when a new HEAD lcluster was scanned, blkaddr would be
bumped by 1 lcluster. However, that way doesn't work anymore for
big pcluster since we actually don't know the compressed size of
pclusters in advance (before reading CBLKCNT lcluster).
So, instead, let blkaddr of each pack be the first pcluster blkaddr
with a valid CBLKCNT, in detail,
1) if CBLKCNT starts at the pack, this first valid pcluster is
itself, e.g.
_____________________________________________________________
|_CBLKCNT0_|_NONHEAD_| .. |_HEAD_|_CBLKCNT1_| ... |_HEAD_| ...
^ = blkaddr base ^ += CBLKCNT0 ^ += CBLKCNT1
2) if CBLKCNT doesn't start at the pack, the first valid pcluster
is the next pcluster, e.g.
_________________________________________________________
| NONHEAD_| .. |_HEAD_|_CBLKCNT0_| ... |_HEAD_|_HEAD_| ...
^ = blkaddr base ^ += CBLKCNT0
^ += 1
When a CBLKCNT is found, blkaddr will be increased by CBLKCNT
lclusters, or a new HEAD is found immediately, bump blkaddr by 1
instead (see the picture above.)
Also noted if CBLKCNT is the end of the pack, instead of storing
delta1 (distance of the next HEAD lcluster) as normal NONHEADs,
it still uses the compressed block count (delta0) since delta1
can be calculated indirectly but the block count can't.
Adjust decoding logic to fit big pcluster compact indexes as well.
Link: https://lore.kernel.org/r/20210407043927.10623-9-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
When INCOMPAT_BIG_PCLUSTER sb feature is enabled, legacy compress indexes
will also have the same on-disk header compact indexes to keep per-file
configurations instead of leaving it zeroed.
If ADVISE_BIG_PCLUSTER is set for a file, CBLKCNT will be loaded for each
pcluster in this file by parsing 1st non-head lcluster.
Link: https://lore.kernel.org/r/20210407043927.10623-8-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Adjust per-CPU buffers on demand since big pcluster definition is
available. Also, bail out unsupported pcluster size according to
Z_EROFS_PCLUSTER_MAX_SIZE.
Link: https://lore.kernel.org/r/20210407043927.10623-7-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Big pcluster indicates the size of compressed data for each physical
pcluster is no longer fixed as block size, but could be more than 1
block (more accurately, 1 logical pcluster)
When big pcluster feature is enabled for head0/1, delta0 of the 1st
non-head lcluster index will keep block count of this pcluster in
lcluster size instead of 1. Or, the compressed size of pcluster
should be 1 lcluster if pcluster has no non-head lcluster index.
Also note that BIG_PCLUSTER feature reuses COMPR_CFGS feature since
it depends on COMPR_CFGS and will be released together.
Link: https://lore.kernel.org/r/20210407043927.10623-6-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
When picking up inplace I/O pages, it should be traversed in reverse
order in aligned with the traversal order of file-backed online pages.
Also, index should be updated together when preloading compressed pages.
Previously, only page-sized pclustersize was supported so no problem
at all. Also rename `compressedpages' to `icpage_ptr' to reflect its
functionality.
Link: https://lore.kernel.org/r/20210407043927.10623-5-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Since multiple pcluster sizes could be used at once, the number of
compressed pages will become a variable factor. It's necessary to
introduce slab pools rather than a single slab cache now.
This limits the pclustersize to 1M (Z_EROFS_PCLUSTER_MAX_SIZE), and
get rid of the obsolete EROFS_FS_CLUSTER_PAGE_LIMIT, which has no
use now.
Link: https://lore.kernel.org/r/20210407043927.10623-4-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
To deal the with the cases which inplace decompression is infeasible
for some inplace I/O. Per-CPU buffers was introduced to get rid of page
allocation latency and thrash for low-latency decompression algorithms
such as lz4.
For the big pcluster feature, introduce multipage per-CPU buffers to
keep such inplace I/O pclusters temporarily as well but note that
per-CPU pages are just consecutive virtually.
When a new big pcluster fs is mounted, its max pclustersize will be
read and per-CPU buffers can be growed if needed. Shrinking adjustable
per-CPU buffers is more complex (because we don't know if such size
is still be used), so currently just release them all when unloading.
Link: https://lore.kernel.org/r/20210409190630.19569-1-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Formal big pcluster design is actually more powerful / flexable than
the previous thought whose pclustersize was fixed as power-of-2 blocks,
which was obviously inefficient and space-wasting. Instead, pclustersize
can now be set independently for each pcluster, so various pcluster
sizes can also be used together in one file if mkfs wants (for example,
according to data type and/or compression ratio).
Let's get rid of previous physical_clusterbits[] setting (also notice
that corresponding on-disk fields are still 0 for now). Therefore,
head1/2 can be used for at most 2 different algorithms in one file and
again pclustersize is now independent of these.
Link: https://lore.kernel.org/r/20210407043927.10623-2-xiang@kernel.org
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
zmap.c: s/correspoinding/corresponding
zdata.c: s/endding/ending
Link: https://lore.kernel.org/r/20210331093920.31923-1-gongruiqi1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Add a bitmap for available compression algorithms and a variable-sized
on-disk table for compression options in preparation for upcoming big
pcluster and LZMA algorithm, which follows the end of super block.
To parse the compression options, the bitmap is scanned one by one.
For each available algorithm, there is data followed by 2-byte `length'
correspondingly (it's enough for most cases, or entire fs blocks should
be used.)
With such available algorithm bitmap, kernel itself can also refuse to
mount such filesystem if any unsupported compression algorithm exists.
Note that COMPR_CFGS feature will be enabled with BIG_PCLUSTER.
Link: https://lore.kernel.org/r/20210329100012.12980-1-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Introduce z_erofs_lz4_cfgs to store all lz4 configurations.
Currently it's only max_distance, but will be used for new
features later.
Link: https://lore.kernel.org/r/20210329012308.28743-4-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
lz4 uses LZ4_DISTANCE_MAX to record history preservation. When
using rolling decompression, a block with a higher compression
ratio will cause a larger memory allocation (up to 64k). It may
cause a large resource burden in extreme cases on devices with
small memory and a large number of concurrent IOs. So appropriately
reducing this value can improve performance.
Decreasing this value will reduce the compression ratio (except
when input_size <LZ4_DISTANCE_MAX). But considering that erofs
currently only supports 4k output, reducing this value will not
significantly reduce the compression benefits.
The maximum value of LZ4_DISTANCE_MAX defined by lz4 is 64k, and
we can only reduce this value. For the old kernel, it just can't
reduce the memory allocation during rolling decompression without
affecting the decompression result.
Link: https://lore.kernel.org/r/20210329012308.28743-3-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
[ Gao Xiang: introduce struct erofs_sb_lz4_info for configurations. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Introduce erofs_sb_has_xxx() to make long checks short, especially
for later big pcluster & LZMA features.
Link: https://lore.kernel.org/r/20210329012308.28743-2-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
If any unknown i_format fields are set (may be of some new incompat
inode features), mark such inode as unsupported.
Just in case of any new incompat i_format fields added in the future.
Link: https://lore.kernel.org/r/20210329003614.6583-1-hsiangkao@aol.com
Fixes: 431339ba9042 ("staging: erofs: add inode operations")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Currently, erofs_map_blocks() will be called only from
erofs_{bmap, read_raw_page} which are all for uncompressed files.
So, the compression branch in erofs_map_blocks() is pointless. Let's
remove it and use erofs_map_blocks_flatmode() directly. Also update
related comments.
Link: https://lore.kernel.org/r/20210325071008.573-1-zbestahu@gmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Add a missing case which could cause unnecessary page allocation but
not directly use inplace I/O instead, which increases runtime extra
memory footprint.
The detail is, considering an online file-backed page, the right half
of the page is chosen to be cached (e.g. the end page of a readahead
request) and some of its data doesn't exist in managed cache, so the
pcluster will be definitely kept in the submission chain. (IOWs, it
cannot be decompressed without I/O, e.g., due to the bypass queue).
Currently, DELAYEDALLOC/TRYALLOC cases can be downgraded as NOINPLACE,
and stop online pages from inplace I/O. After this patch, unneeded page
allocations won't be observed in pickup_page_for_submission() then.
Link: https://lore.kernel.org/r/20210321183227.5182-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Sync decompression was introduced to get rid of additional kworker
scheduling overhead. But there is no such overhead in non-atomic
contexts. Therefore, it should be better to turn off sync decompression
to avoid the current thread waiting in z_erofs_runqueue.
Link: https://lore.kernel.org/r/20210317035448.13921-3-huangjianan@oppo.com
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
z_erofs_decompressqueue_endio may not be executed in the atomic
context, for example, when dm-verity is turned on. In this scenario,
data can be decompressed directly to get rid of additional kworker
scheduling overhead.
Link: https://lore.kernel.org/r/20210317035448.13921-2-huangjianan@oppo.com
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Currently, err would be treated as io error. Therefore, it'd be
better to ensure memory allocation during rolling decompression
to avoid such io error.
In the long term, we might consider adding another !Uptodate case
for such case.
Link: https://lore.kernel.org/r/20210316031515.90954-1-huangjianan@oppo.com
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"Fix an urgent regression introduced by commit baa2c7c97153 ("block:
set .bi_max_vecs as actual allocated vector number"), which could
cause unexpected hung since linux 5.12-rc1.
Resolve it by avoiding using bio->bi_max_vecs completely"
* tag 'erofs-for-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix bio->bi_max_vecs behavior change
|
|
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Martin reported an issue that directory read could be hung on the
latest -rc kernel with some certain image. The root cause is that
commit baa2c7c97153 ("block: set .bi_max_vecs as actual allocated
vector number") changes .bi_max_vecs behavior. bio->bi_max_vecs
is set as actual allocated vector number rather than the requested
number now.
Let's avoid using .bi_max_vecs completely instead.
Link: https://lore.kernel.org/r/20210306040438.8084-1-hsiangkao@aol.com
Reported-by: Martin DEVERA <devik@eaxlabs.cz>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[ Gao Xiang: note that <= 5.11 kernels are not impacted. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
|
|
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull d_name whack-a-mole from Al Viro:
"A bunch of places that play with ->d_name in printks instead of using
proper formats..."
* 'work.d_name' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs_file_mmap(): use %pD
cifs_debug: use %pd instead of messing with ->d_name
erofs: use %pd instead of messing with ->d_name
cramfs: use %pD instead of messing with file_dentry()->d_name
|
|
Currently, although set_bit() & test_bit() pairs are used as a fast-
path for initialized configurations. However, these atomic ops are
actually relaxed forms. Instead, load-acquire & store-release form is
needed to make sure uninitialized fields won't be observed in advance
here (yet no such corresponding bitops so use full barriers instead.)
Link: https://lore.kernel.org/r/20210209130618.15838-1-hsiangkao@aol.com
Fixes: 62dc45979f3f ("staging: erofs: fix race of initializing xattrs of a inode at the same time")
Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support")
Cc: <stable@vger.kernel.org> # 5.3+
Reported-by: Huang Jianan <huangjianan@oppo.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
syzbot generated a crafted bitszbits which can be shifted
out-of-bounds[1]. So directly print unsupported blkszbits
instead of blksize.
[1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com
Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com
Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Surprisingly, `block' in sector_t indicates the number of
i_blkbits-sized blocks rather than sectors for bmap.
In addition, considering buffer_head limits mapped size to 32-bits,
should avoid using generic_block_bmap.
Link: https://lore.kernel.org/r/20201209115740.18802-1-huangjianan@oppo.com
Fixes: 9da681e017a3 ("staging: erofs: support bmap")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
[ Gao Xiang: slightly update the commit message description. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Try to forcely switch to inplace I/O under low memory scenario in
order to avoid direct memory reclaim due to cached page allocation.
Link: https://lore.kernel.org/r/20201209123717.12430-1-hsiangkao@aol.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
simplify try_to_claim_pcluster() by directly using cmpxchg() here
(the retry loop caused more overhead.) Also, move the chain loop
detection in and rename it to z_erofs_try_to_claim_pcluster().
Link: https://lore.kernel.org/r/20201208095834.3133565-3-hsiangkao@redhat.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Previously, it could be some concern to call add_to_page_cache_lru()
with page->mapping == Z_EROFS_MAPPING_STAGING (!= NULL).
In contrast, page->private is used instead now, so partially revert
commit 5ddcee1f3a1c ("erofs: get rid of __stagingpage_alloc helper")
with some adaption for simplicity.
Link: https://lore.kernel.org/r/20201208095834.3133565-2-hsiangkao@redhat.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Previously, we played around with magical page->mapping for short-lived
temporary pages since we need to identify different types of pages in
the same pcluster but both invalidated and short-lived temporary pages
can have page->mapping == NULL. It was considered as safe because that
temporary pages are all non-LRU / non-movable pages.
This patch tends to use specific page->private to identify short-lived
pages instead so it won't rely on page->mapping anymore. Details are
described in "compress.h" as well.
Link: https://lore.kernel.org/r/20201208095834.3133565-1-hsiangkao@redhat.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Since commit 4f761fa253b4 ("erofs: rename errln/infoln/debugln to
erofs_{err, info, dbg}") the defined macro EROFS_VERSION has no affect,
therefore removing it from the Makefile is a non-functional change.
Link: https://lore.kernel.org/r/20201030122839.25431-1-vladimir@tuxera.com
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
pcluster should be only set up for all managed pages instead of
temporary pages. Since it currently uses page->mapping to identify,
the impact is minor for now.
[ Update: Vladimir reported the kernel log becomes polluted
because PAGE_FLAGS_CHECK_AT_FREE flag(s) set if the page
allocation debug option is enabled. ]
Link: https://lore.kernel.org/r/20201022145724.27284-1-hsiangkao@aol.com
Fixes: 5ddcee1f3a1c ("erofs: get rid of __stagingpage_alloc helper")
Cc: <stable@vger.kernel.org> # 5.5+
Tested-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
EROFS has _only one_ ondisk timestamp (ctime is currently
documented and recorded, we might also record mtime instead
with a new compat feature if needed) for each extended inode
since EROFS isn't mainly for archival purposes so no need to
keep all timestamps on disk especially for Android scenarios
due to security concerns. Also, romfs/cramfs don't have their
own on-disk timestamp, and squashfs only records mtime instead.
Let's also derive access time from ondisk timestamp rather than
leaving it empty, and if mtime/atime for each file are really
needed for specific scenarios as well, we can also use xattrs
to record them then.
Link: https://lore.kernel.org/r/20201031195102.21221-1-hsiangkao@aol.com
[ Gao Xiang: It'd be better to backport for user-friendly concern. ]
Fixes: 431339ba9042 ("staging: erofs: add inode operations")
Cc: stable <stable@vger.kernel.org> # 4.19+
Reported-by: nl6720 <nl6720@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
|
|
Opt_nouser_xattr and Opt_noacl are useless, so just remove them.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20201005071550.66193-1-cgxu519@mykernel.net
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Let's add REQ_RAHEAD flag so it'd be easier to identify
readahead I/O requests in blktrace.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200919072730.24989-3-hsiangkao@redhat.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
should_decompress_synchronously() has one single condition
for now, so fold it instead.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200919072730.24989-2-hsiangkao@redhat.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
variable `err' in z_erofs_submit_queue() isn't useful
here, remove it instead.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200919072730.24989-1-hsiangkao@redhat.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Get rid of boilerplate in most of ->statfs()
instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After commit 0615090c5044 ("erofs: convert compressed files from
readpages to readahead"), add_to_page_cache_lru() was moved to mm
code, so that in below call path, no page will be cached into
@pagepool list or grabbed from @pagepool list:
- z_erofs_readpage
- z_erofs_do_read_page
- preload_compressed_pages
- erofs_allocpage
Let's get rid of this unneeded @pagepool parameter.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200917011821.22767-1-yuchao0@huawei.com
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Don't recheck it since xattr_permission() already
checks CAP_SYS_ADMIN capability.
Just follow 5d3ce4f70172 ("f2fs: avoid duplicated permission check for "trusted." xattrs")
Reported-by: Hongyu Jin <hongyu.jin@unisoc.com>
[ Gao Xiang: since it could cause some complex Android overlay
permission issue as well on android-5.4+, it'd be better to
backport to 5.4+ rather than pure cleanup on mainline. ]
Cc: <stable@vger.kernel.org> # 5.4+
Link: https://lore.kernel.org/r/20200811070020.6339-1-hsiangkao@redhat.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
