summaryrefslogtreecommitdiffstats
path: root/fs/dlm
AgeCommit message (Collapse)AuthorFilesLines
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-09-26fs: dlm: fix possible use after free if tracingAlexander Aring1-7/+8
This patch fixes a possible use after free if tracing for the specific event is enabled. To avoid the use after free we introduce a out_put label like all other user lock specific requests and safe in a boolean to do a put or not which depends on the execution path of dlm_user_request(). Cc: stable@vger.kernel.org Fixes: 7a3de7324c2b ("fs: dlm: trace user space callbacks") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-23fs: dlm: const void resource name parameterAlexander Aring2-11/+14
The resource name parameter should never be changed by DLM so we declare it as const. At some point it is handled as a char pointer, a resource name can be a non printable ascii string as well. This patch change it to handle it as void pointer as it is offered by DLM API. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: LSFL_CB_DELAY only for kernel lockspacesAlexander Aring1-6/+7
This patch only set/clear the LSFL_CB_DELAY bit when it's actually a kernel lockspace signaled by if ls->ls_callback_wq is set or not set in this case. User lockspaces will never evaluate this flag. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: remove DLM_LSFL_FS from uapiAlexander Aring3-7/+40
The DLM_LSFL_FS flag is set in lockspaces created directly for a kernel user, as opposed to those lockspaces created for user space applications. The user space libdlm allowed this flag to be set for lockspaces created from user space, but then used by a kernel user. No kernel user has ever used this method, so remove the ability to do it. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: trace user space callbacksAlexander Aring2-5/+26
This patch adds trace callbacks for user locks. Unfortenately user locks are handled in a different way than kernel locks in some cases. User locks never call the dlm_lock()/dlm_unlock() kernel API and use the next step internal API of dlm. Adding those traces from user API callers should make it possible for dlm trace system to see lock handling for user locks as well. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: change ls_clear_proc_locks to spinlockAlexander Aring4-8/+8
This patch changes the ls_clear_proc_locks to a spinlock because there is no need to handle it as a mutex as there is no sleepable context when ls_clear_proc_locks is held. This allows us to call those functionality in non-sleepable contexts. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: remove dlm_del_ast prototypeAlexander Aring1-1/+0
This patch removes dlm_del_ast() prototype which is not being used in the dlm subsystem because there is not implementation for it. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: handle rcom in else if branchAlexander Aring1-1/+4
Currently we handle in dlm_receive_buffer() everything else than a DLM_MSG type as DLM_RCOM message. Although a different message than DLM_MSG should be a DLM_RCOM we should explicit check on DLM_RCOM and drop a log_error() if we see something unexpected. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: allow lockspaces have zero lvblenAlexander Aring1-1/+1
A dlm user may not use the DLM_LKF_VALBLK flag in the DLM API, so a zero lvblen should be allowed as a lockspace parameter. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: fix invalid derefence of sb_lvbptrAlexander Aring1-1/+1
I experience issues when putting a lkbsb on the stack and have sb_lvbptr field to a dangled pointer while not using DLM_LKF_VALBLK. It will crash with the following kernel message, the dangled pointer is here 0xdeadbeef as example: [ 102.749317] BUG: unable to handle page fault for address: 00000000deadbeef [ 102.749320] #PF: supervisor read access in kernel mode [ 102.749323] #PF: error_code(0x0000) - not-present page [ 102.749325] PGD 0 P4D 0 [ 102.749332] Oops: 0000 [#1] PREEMPT SMP PTI [ 102.749336] CPU: 0 PID: 1567 Comm: lock_torture_wr Tainted: G W 5.19.0-rc3+ #1565 [ 102.749343] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014 [ 102.749344] RIP: 0010:memcpy_erms+0x6/0x10 [ 102.749353] Code: cc cc cc cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 102.749355] RSP: 0018:ffff97a58145fd08 EFLAGS: 00010202 [ 102.749358] RAX: ffff901778b77070 RBX: 0000000000000000 RCX: 0000000000000040 [ 102.749360] RDX: 0000000000000040 RSI: 00000000deadbeef RDI: ffff901778b77070 [ 102.749362] RBP: ffff97a58145fd10 R08: ffff901760b67a70 R09: 0000000000000001 [ 102.749364] R10: ffff9017008e2cb8 R11: 0000000000000001 R12: ffff901760b67a70 [ 102.749366] R13: ffff901760b78f00 R14: 0000000000000003 R15: 0000000000000001 [ 102.749368] FS: 0000000000000000(0000) GS:ffff901876e00000(0000) knlGS:0000000000000000 [ 102.749372] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 102.749374] CR2: 00000000deadbeef CR3: 000000017c49a004 CR4: 0000000000770ef0 [ 102.749376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 102.749378] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 102.749379] PKRU: 55555554 [ 102.749381] Call Trace: [ 102.749382] <TASK> [ 102.749383] ? send_args+0xb2/0xd0 [ 102.749389] send_common+0xb7/0xd0 [ 102.749395] _unlock_lock+0x2c/0x90 [ 102.749400] unlock_lock.isra.56+0x62/0xa0 [ 102.749405] dlm_unlock+0x21e/0x330 [ 102.749411] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 102.749416] torture_unlock+0x5a/0x90 [dlm_locktorture] [ 102.749419] ? preempt_count_sub+0xba/0x100 [ 102.749427] lock_torture_writer+0xbd/0x150 [dlm_locktorture] [ 102.786186] kthread+0x10a/0x130 [ 102.786581] ? kthread_complete_and_exit+0x20/0x20 [ 102.787156] ret_from_fork+0x22/0x30 [ 102.787588] </TASK> [ 102.787855] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common kvm_intel iTCO_wdt iTCO_vendor_support kvm vmw_vsock_virtio_transport qxl irqbypass vmw_vsock_virtio_transport_common drm_ttm_helper crc32_pclmul joydev crc32c_intel ttm vsock virtio_scsi virtio_balloon snd_pcm drm_kms_helper virtio_console snd_timer snd drm soundcore syscopyarea i2c_i801 sysfillrect sysimgblt i2c_smbus pcspkr fb_sys_fops lpc_ich serio_raw [ 102.792536] CR2: 00000000deadbeef [ 102.792930] ---[ end trace 0000000000000000 ]--- This patch fixes the issue by checking also on DLM_LKF_VALBLK on exflags is set when copying the lvbptr array instead of if it's just null which fixes for me the issue. I think this patch can fix other dlm users as well, depending how they handle the init, freeing memory handling of sb_lvbptr and don't set DLM_LKF_VALBLK for some dlm_lock() calls. It might a there could be a hidden issue all the time. However with checking on DLM_LKF_VALBLK the user always need to provide a sb_lvbptr non-null value. There might be more intelligent handling between per ls lvblen, DLM_LKF_VALBLK and non-null to report the user the way how DLM API is used is wrong but can be added for later, this will only fix the current behaviour. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: handle -EINVAL as log_error()Alexander Aring1-2/+30
If the user generates -EINVAL it's probably because they are using DLM incorrectly. Change the log level to make these errors more visible. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: use __func__ for function nameAlexander Aring1-2/+2
Avoid hard-coded function names inside message format strings. (Prevents checkpatch warnings.) Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: handle -EBUSY first in unlock validationAlexander Aring1-22/+22
This patch checks for -EBUSY conditions in dlm_unlock() before checking for -EINVAL conditions (except for CANCEL and FORCEUNLOCK calls where a busy condition is expected.) There are no problems with the current ordering of checks, but this makes dlm_unlock() consistent with dlm_lock(), and may avoid future problems if other checks are added. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: handle -EBUSY first in lock arg validationAlexander Aring1-9/+9
During lock arg validation, first check for -EBUSY cases, then for -EINVAL cases. The -EINVAL checks look at lkb state variables which are not stable when an lkb is busy and would cause an -EBUSY result, e.g. lkb->lkb_grmode. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: fix race between test_bit() and queue_work()Alexander Aring1-2/+4
This patch fixes a race by using ls_cb_mutex around the bit operations and conditional code blocks for LSFL_CB_DELAY. The function dlm_callback_stop() expects to stop all callbacks and flush all currently queued onces. The set_bit() is not enough because there can still be queue_work() after the workqueue was flushed. To avoid queue_work() after set_bit(), surround both by ls_cb_mutex. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-23fs: dlm: fix race in lowcommsAlexander Aring1-0/+4
This patch fixes a race between queue_work() in _dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can take the final reference of a dlm_msg and so msg->idx can contain garbage which is signaled by the following warning: [ 676.237050] ------------[ cut here ]------------ [ 676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50 [ 676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr [ 676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546 [ 676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014 [ 676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50 [ 676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 [ 676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282 [ 676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006 [ 676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e [ 676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001 [ 676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005 [ 676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480 [ 676.254257] FS: 0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000 [ 676.255239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0 [ 676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 676.258397] PKRU: 55555554 [ 676.258729] Call Trace: [ 676.259063] <TASK> [ 676.259354] dlm_midcomms_commit_mhandle+0xcc/0x110 [ 676.259964] queue_bast+0x8b/0xb0 [ 676.260423] grant_pending_locks+0x166/0x1b0 [ 676.261007] _unlock_lock+0x75/0x90 [ 676.261469] unlock_lock.isra.57+0x62/0xa0 [ 676.262009] dlm_unlock+0x21e/0x330 [ 676.262457] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 676.263183] torture_unlock+0x5a/0x90 [dlm_locktorture] [ 676.263815] ? preempt_count_sub+0xba/0x100 [ 676.264361] ? complete+0x1d/0x60 [ 676.264777] lock_torture_writer+0xb8/0x150 [dlm_locktorture] [ 676.265555] kthread+0x10a/0x130 [ 676.266007] ? kthread_complete_and_exit+0x20/0x20 [ 676.266616] ret_from_fork+0x22/0x30 [ 676.267097] </TASK> [ 676.267381] irq event stamp: 9579855 [ 676.267824] hardirqs last enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60 [ 676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60 [ 676.270008] softirqs last enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7 [ 676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0 [ 676.272796] ---[ end trace 0000000000000000 ]--- I reproduced this warning with dlm_locktorture test which is currently not upstream. However this patch fix the issue by make a additional refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg(). In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be the final put. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-01fs: dlm: move kref_put assert for lkb structsAlexander Aring1-3/+8
The unhold_lkb() function decrements the lock's kref, and asserts that the ref count was not the final one. Use the kref_put release function (which should not be called) to call the assert, rather than doing the assert based on the kref_put return value. Using kill_lkb() as the release function doesn't make sense if we only want to assert. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-01fs: dlm: don't use deprecated timeout features by defaultAlexander Aring8-5/+118
This patch will disable use of deprecated timeout features if CONFIG_DLM_DEPRECATED_API is not set. The deprecated features will be removed in upcoming kernel release v6.2. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-08-01fs: dlm: add deprecation Kconfig and warnings for timeoutsAlexander Aring3-1/+27
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option that must be enabled to use two timeout-related features that we intend to remove in kernel v6.2. Warnings are printed if either is enabled and used. Neither has ever been used as far as we know. . The DLM_LSFL_TIMEWARN lockspace creation flag will be removed, along with the associated configfs entry for setting the timeout. Setting the flag and configfs file would cause dlm to track how long locks were waiting for reply messages. After a timeout, a kernel message would be logged, and a netlink message would be sent to userspace. Recently, midcomms messages have been added that produce much better logging about actual problems with messages. No use has ever been found for the netlink messages. . The userspace libdlm API has allowed the DLM_LKF_TIMEOUT flag with a timeout value to be set in lock requests. The lock request would be cancelled after the timeout. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: remove timeout from dlm_user_adopt_orphanAlexander Aring3-3/+2
Remove the unused timeout parameter from dlm_user_adopt_orphan(). Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: remove waiter warningsAlexander Aring6-91/+0
This patch removes warning messages that could be logged when remote requests had been waiting on a reply message for some timeout period (which could be set through configfs, but was rarely enabled.) The improved midcomms layer now carefully tracks all messages and replies, and logs much more useful messages if there is an actual problem. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: fix grammar in lowcomms outputAlexander Aring1-2/+2
This patch fixes some grammar output in lowcomms implementation by removing the "successful" word which should be "successfully" but it can never be unsuccessfully so we remove it. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: add comment about lkb IFL flagsAlexander Aring1-0/+8
This patch adds comments about the difference between the lower 2 bytes of lkb flags and the 2 upper bytes of the lkb IFL flags. In short the upper 2 bytes will be handled as internal flags whereas the lower 2 bytes are part of the DLM protocol and are used to exchange messages. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: handle recovery result outside of ls_recoverAlexander Aring1-16/+26
This patch cleans up the handling of recovery results by moving it from ls_recover() to the caller do_ls_recovery(). This makes the error handling clearer. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: make new_lockspace() wait until recovery completesAlexander Aring4-19/+20
Make dlm_new_lockspace() wait until a full recovery completes sucessfully or fails. Previously, dlm_new_lockspace() returned to the caller after dlm_recover_members() finished, which is only partially through recovery. The result of the previous behavior is that the new lockspace would not be usable for some time (especially with overlapping recoveries), and some errors in the later part of recovery could not be returned to the caller. Kernel callers gfs2 and cluster-md have their own wait handling to wait for recovery to complete after calling dlm_new_lockspace(). This continues to work, but will be unnecessary. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: call dlm_lsop_recover_prep onceAlexander Aring1-1/+10
A lockspace can be "stopped" multiple times consecutively before being "started" (when recoveries overlap.) In this case, the lsop_recover_prep callback only needs to be called once when the lockspace is first stopped, and not repeatedly for each stop. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: update comments about recovery and membership handlingAlexander Aring2-1/+9
Make clear that a particular recovery iteration must not be aborted before membership changes are applied to the members list (ls_nodes) and midcomms layer. Interrupting recovery before this can result in missing node-specific changes in midcomms or through lsops. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: add resource name to tracepointsAlexander Aring1-2/+2
This patch adds the resource name to dlm tracepoints. The name usually comes through the lkb_resource, but in some cases a resource may not yet be associated with an lkb, in which case the name and namelen parameters are used. It should be okay to access the lkb_resource and the res_name field at the time when the tracepoint is invoked. The resource is assigned to a lkb and it's reference is being held during the tracepoint call. During this time the resource cannot be freed. Also a lkb will never switch its assigned resource. The name of a dlm_rsb is assigned at creation time and should never be changed during runtime as well. The TP_printk() call uses always a hexadecimal string array representation for the resource name (which is not necessarily ascii.) Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: remove additional dereference of lksbAlexander Aring1-1/+1
This patch removes a dereference of lksb of lkb when calling ast tracepoint. First it reduces additional overhead, even if traces are not active. Second we can deference it in TP_fast_assign from the existing lkb parameter. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: change ast and bast trace orderAlexander Aring1-2/+2
This patch moves the trace calls for ast and bast to before the ast and bast callback functions are called rather than after. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: change posix lock sigint handlingAlexander Aring1-3/+26
This patch changes the handling of a plock operation that was interrupted while waiting for a user space reply from dlm_controld. (This is not the lock blocking state, i.e. locks_lock_file_wait().) Currently, when an op is interrupted while waiting on user space, the op is removed. When the user space result later arrives, a kernel message is loggged: "dev_write no op...". This can be seen from a test such as "stress-ng --fcntl 100" and interrupting it with ctrl-c. Now, leave the op in place when interrupted and remove it when the result arrives (the result will be ignored.) With this change, the logged message is not expected to appear, and would indicate a bug. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: use dlm_plock_info for do_unlock_closeAlexander Aring1-10/+6
This patch refactors do_unlock_close() by using only struct dlm_plock_info as a parameter. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-24fs: dlm: change plock interrupted message to debug againAlexander Aring1-2/+2
This patch reverses the commit bcfad4265ced ("dlm: improve plock logging if interrupted") by moving it to debug level and notifying the user an op was removed. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-23fs: dlm: add pid to debug logAlexander Aring1-2/+2
This patch adds the pid information which requested the lock operation to the debug log output. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-06-23fs: dlm: plock use list_first_entryAlexander Aring1-1/+1
This patch will use the list helper list_first_entry() instead of using list_entry() to get the first element of a list. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-05-02dlm: use kref_put_lock in __put_lkbAlexander Aring1-6/+6
This patch will optimize __put_lkb() by using kref_put_lock(). The function kref_put_lock() will only take the lock if the reference is going to be zero, if not the lock will never be held. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-05-02dlm: use kref_put_lock in put_rsbAlexander Aring1-3/+5
This patch will optimize put_rsb() by using kref_put_lock(). The function kref_put_lock() will only take the lock if the reference is going to be zero, if not the lock will never be held. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-05-02dlm: remove unnecessary error assignAlexander Aring1-3/+0
This patch removes unnecessary error assigns to 0 at places we know that error is zero because it was checked on non-zero before. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-05-02dlm: fix missing lkb refcount handlingAlexander Aring1-2/+9
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count. So, we always need to call unhold_lkb(lkb) if we decrement lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to zero we need to countdown until reaching zero and call unhold_lkb(lkb). The waiters list unhold_lkb(lkb) can be removed because it's done for the last lkb_wait_count decrement iteration as it's done in _remove_from_waiters(). This issue was discovered by a dlm gfs2 test case which use excessively dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value never reached above 1 if this feature isn't used and so it was not discovered before. The testcase ended in a rsb on the rsb keep data structure with a refcount of 1 but no lkb was associated with it, which is itself an invalid behaviour. A side effect of that was a condition in which the dlm was sending remove messages in a looping behaviour. With this patch that has not been reproduced. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-07fs: dlm: cast resource pointer to uintptr_tAlexander Aring1-1/+1
This patch fixes the following warning when doing a 32 bit kernel build when pointers are 4 byte long: In file included from ./include/linux/byteorder/little_endian.h:5, from ./arch/x86/include/uapi/asm/byteorder.h:5, from ./include/asm-generic/qrwlock_types.h:6, from ./arch/x86/include/asm/spinlock_types.h:7, from ./include/linux/spinlock_types_raw.h:7, from ./include/linux/ratelimit_types.h:7, from ./include/linux/printk.h:10, from ./include/asm-generic/bug.h:22, from ./arch/x86/include/asm/bug.h:87, from ./include/linux/bug.h:5, from ./include/linux/mmdebug.h:5, from ./include/linux/gfp.h:5, from ./include/linux/slab.h:15, from fs/dlm/dlm_internal.h:19, from fs/dlm/rcom.c:12: fs/dlm/rcom.c: In function ‘dlm_send_rcom_lock’: ./include/uapi/linux/byteorder/little_endian.h:32:43: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] #define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) ^ ./include/linux/byteorder/generic.h:86:21: note: in expansion of macro ‘__cpu_to_le64’ #define cpu_to_le64 __cpu_to_le64 ^~~~~~~~~~~~~ fs/dlm/rcom.c:457:14: note: in expansion of macro ‘cpu_to_le64’ rc->rc_id = cpu_to_le64(r); The rc_id value in dlm rcom is handled as u64. The rcom implementation uses for an unique number generation the pointer value of the used dlm_rsb instance. However if the pointer value is 4 bytes long -Wpointer-to-int-cast will print a warning. We get rid of that warning to cast the pointer to uintptr_t which is either 4 or 8 bytes. There might be a very unlikely case where this number isn't unique anymore if using dlm in a mixed cluster of nodes and sizeof(uintptr_t) returns 4 and 8. However this problem was already been there and this patch should get rid of the warning. Fixes: 2f9dbeda8dc0 ("dlm: use __le types for rcom messages") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: replace usage of found with dedicated list iterator variableJakob Koschel3-60/+56
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: remove usage of list iterator for list_add() after the loop bodyJakob Koschel1-4/+8
In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Before, the code implicitly used the head when no element was found when using &pos->list. Since the new variable is only set if an element was found, the list_add() is performed within the loop and only done after the loop if it is done on the list head directly. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: fix pending remove if msg allocation failsAlexander Aring1-1/+2
This patch unsets ls_remove_len and ls_remove_name if a message allocation of a remove messages fails. In this case we never send a remove message out but set the per ls ls_remove_len ls_remove_name variable for a pending remove. Unset those variable should indicate possible waiters in wait_pending_remove() that no pending remove is going on at this moment. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: fix wake_up() calls for pending removeAlexander Aring1-2/+2
This patch move the wake_up() call at the point when a remove message completed. Before it was only when a remove message was going to be sent. The possible waiter in wait_pending_remove() waits until a remove is done if the resource name matches with the per ls variable ls->ls_remove_name. If this is the case we must wait until a pending remove is done which is indicated if DLM_WAIT_PENDING_COND() returns false which will always be the case when ls_remove_len and ls_remove_name are unset to indicate that a remove is not going on anymore. Fixes: 21d9ac1a5376 ("fs: dlm: use event based wait for pending remove") Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: check required context while closeAlexander Aring3-0/+16
This patch adds a WARN_ON() check to validate the right context while dlm_midcomms_close() is called. Even before commit 489d8e559c65 ("fs: dlm: add reliable connection if reconnect") in this context dlm_lowcomms_close() flushes all ongoing transmission triggered by dlm application stack. If we do that, it's required that no new message will be triggered by the dlm application stack. The function dlm_midcomms_close() is not called often so we can check if all lockspaces are in such context. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: cleanup lock handling in dlm_master_lookupAlexander Aring1-87/+102
This patch will remove the following warning by sparse: fs/dlm/lock.c:1049:9: warning: context imbalance in 'dlm_master_lookup' - different lock contexts for basic block I tried to find any issues with the current handling and I did not find any. However it is hard to follow the lock handling in this area of dlm_master_lookup() and I suppose that sparse cannot realize that there are no issues. The variable "toss_list" makes it really hard to follow the lock handling because if it's set the rsb lock/refcount isn't held but the ls->ls_rsbtbl[b].lock is held and this is one reason why the rsb lock/refcount does not need to be held. If it's not set the ls->ls_rsbtbl[b].lock is not held but the rsb lock/refcount is held. The indicator of toss_list will be used to store the actual lock state. Another possibility is that a retry can happen and then it's hard to follow the specific code part. I did not find any issues but sparse cannot realize that there are no issues. To make it more easier to understand for developers and sparse as well, we remove the toss_list variable which indicates a specific lock state and move handling in between of this lock state in a separate function. This function can be called now in case when the initial lock states are taken which was previously signalled if toss_list was set or not. The advantage here is that we can release all locks/refcounts in mostly the same code block as it was taken. Afterwards sparse had no issues to figure out that there are no problems with the current lock behaviour. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: remove found label in dlm_master_lookupAlexander Aring1-9/+9
This patch cleanups a not necessary label found which can be replaced by a proper else handling to jump over a specific code block. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-06dlm: remove __user conversion warningsAlexander Aring1-8/+8
This patch avoids the following sparse warning: fs/dlm/user.c:111:38: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:111:38: expected void [noderef] __user *castparam fs/dlm/user.c:111:38: got void * fs/dlm/user.c:112:37: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:112:37: expected void [noderef] __user *castaddr fs/dlm/user.c:112:37: got void * fs/dlm/user.c:113:38: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:113:38: expected void [noderef] __user *bastparam fs/dlm/user.c:113:38: got void * fs/dlm/user.c:114:37: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:114:37: expected void [noderef] __user *bastaddr fs/dlm/user.c:114:37: got void * fs/dlm/user.c:115:33: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:115:33: expected struct dlm_lksb [noderef] __user *lksb fs/dlm/user.c:115:33: got void * fs/dlm/user.c:130:39: warning: cast removes address space '__user' of expression fs/dlm/user.c:131:40: warning: cast removes address space '__user' of expression fs/dlm/user.c:132:36: warning: cast removes address space '__user' of expression So far I see there is no direct handling of copying a pointer value to another pointer value. The handling only copies the actual pointer address to a scalar type or vice versa. This should be okay because it never handles dereferencing anything of those addresses in the kernel space. To get rid of those warnings we doing some different casting which results in no warnings in sparse or compiler. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 15:31:29 +0000