summaryrefslogtreecommitdiffstats
path: root/fs/direct-io.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-21Merge tag 'xfs-for-linus-4.6-rc1' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs updates from Dave Chinner: "There's quite a lot in this request, and there's some cross-over with ext4, dax and quota code due to the nature of the changes being made. As for the rest of the XFS changes, there are lots of little things all over the place, which add up to a lot of changes in the end. The major changes are that we've reduced the size of the struct xfs_inode by ~100 bytes (gives an inode cache footprint reduction of >10%), the writepage code now only does a single set of mapping tree lockups so uses less CPU, delayed allocation reservations won't overrun under random write loads anymore, and we added compile time verification for on-disk structure sizes so we find out when a commit or platform/compiler change breaks the on disk structure as early as possible. Change summary: - error propagation for direct IO failures fixes for both XFS and ext4 - new quota interfaces and XFS implementation for iterating all the quota IDs in the filesystem - locking fixes for real-time device extent allocation - reduction of duplicate information in the xfs and vfs inode, saving roughly 100 bytes of memory per cached inode. - buffer flag cleanup - rework of the writepage code to use the generic write clustering mechanisms - several fixes for inode flag based DAX enablement - rework of remount option parsing - compile time verification of on-disk format structure sizes - delayed allocation reservation overrun fixes - lots of little error handling fixes - small memory leak fixes - enable xfsaild freezing again" * tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits) xfs: always set rvalp in xfs_dir2_node_trim_free xfs: ensure committed is initialized in xfs_trans_roll xfs: borrow indirect blocks from freed extent when available xfs: refactor delalloc indlen reservation split into helper xfs: update freeblocks counter after extent deletion xfs: debug mode forced buffered write failure xfs: remove impossible condition xfs: check sizes of XFS on-disk structures at compile time xfs: ioends require logically contiguous file offsets xfs: use named array initializers for log item dumping xfs: fix computation of inode btree maxlevels xfs: reinitialise per-AG structures if geometry changes during recovery xfs: remove xfs_trans_get_block_res xfs: fix up inode32/64 (re)mount handling xfs: fix format specifier , should be %llx and not %llu xfs: sanitize remount options xfs: convert mount option parsing to tokens xfs: fix two memory leaks in xfs_attr_list.c error paths xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared ...
2016-03-19Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: - Preparations of parallel lookups (the remaining main obstacle is the need to move security_d_instantiate(); once that becomes safe, the rest will be a matter of rather short series local to fs/*.c - preadv2/pwritev2 series from Christoph - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits) splice: handle zero nr_pages in splice_to_pipe() vfs: show_vfsstat: do not ignore errors from show_devname method dcache.c: new helper: __d_add() don't bother with __d_instantiate(dentry, NULL) untangle fsnotify_d_instantiate() a bit uninline d_add() replace d_add_unique() with saner primitive quota: use lookup_one_len_unlocked() cifs_get_root(): use lookup_one_len_unlocked() nfs_lookup: don't bother with d_instantiate(dentry, NULL) kill dentry_unhash() ceph_fill_trace(): don't bother with d_instantiate(dn, NULL) autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup() configfs: move d_rehash() into configfs_create() for regular files ceph: don't bother with d_rehash() in splice_dentry() namei: teach lookup_slow() to skip revalidate namei: massage lookup_slow() to be usable by lookup_one_len_unlocked() lookup_one_len_unlocked(): use lookup_dcache() namei: simplify invalidation logics in lookup_dcache() namei: change calling conventions for lookup_{fast,slow} and follow_managed() ...
2016-03-04direct-io: only use block polling if explicitly requestedChristoph Hellwig1-1/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stephen Bates <stephen.bates@pmcs.com> Tested-by: Stephen Bates <stephen.bates@pmcs.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-02-08direct-io: always call ->end_io if non-NULLChristoph Hellwig1-2/+7
This way we can pass back errors to the file system, and allow for cleanup required for all direct I/O invocations. Also allow the ->end_io handlers to return errors on their own, so that I/O completion errors can be passed on to the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-30block: fix use-after-free in dio_bio_completeMike Krinkin1-1/+1
kasan reported the following error when i ran xfstest: [ 701.826854] ================================================================== [ 701.826864] BUG: KASAN: use-after-free in dio_bio_complete+0x41a/0x600 at addr ffff880080b95f94 [ 701.826870] Read of size 4 by task loop2/3874 [ 701.826879] page:ffffea000202e540 count:0 mapcount:0 mapping: (null) index:0x0 [ 701.826890] flags: 0x100000000000000() [ 701.826895] page dumped because: kasan: bad access detected [ 701.826904] CPU: 3 PID: 3874 Comm: loop2 Tainted: G B W L 4.5.0-rc1-next-20160129 #83 [ 701.826910] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013 [ 701.826917] ffff88008fadf800 ffff88008fadf758 ffffffff81ca67bb 0000000041b58ab3 [ 701.826941] ffffffff830d1e74 ffffffff81ca6724 ffff88008fadf748 ffffffff8161c05c [ 701.826963] 0000000000000282 ffff88008fadf800 ffffed0010172bf2 ffffea000202e540 [ 701.826987] Call Trace: [ 701.826997] [<ffffffff81ca67bb>] dump_stack+0x97/0xdc [ 701.827005] [<ffffffff81ca6724>] ? _atomic_dec_and_lock+0xc4/0xc4 [ 701.827014] [<ffffffff8161c05c>] ? __dump_page+0x32c/0x490 [ 701.827023] [<ffffffff816b0d03>] kasan_report_error+0x5f3/0x8b0 [ 701.827033] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600 [ 701.827040] [<ffffffff816b1119>] __asan_report_load4_noabort+0x59/0x80 [ 701.827048] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600 [ 701.827053] [<ffffffff817c302a>] dio_bio_complete+0x41a/0x600 [ 701.827057] [<ffffffff81bd19c8>] ? blk_queue_exit+0x108/0x270 [ 701.827060] [<ffffffff817c32b0>] dio_bio_end_aio+0xa0/0x4d0 [ 701.827063] [<ffffffff817c3210>] ? dio_bio_complete+0x600/0x600 [ 701.827067] [<ffffffff81bd2806>] ? blk_account_io_completion+0x316/0x5d0 [ 701.827070] [<ffffffff81bafe89>] bio_endio+0x79/0x200 [ 701.827074] [<ffffffff81bd2c9f>] blk_update_request+0x1df/0xc50 [ 701.827078] [<ffffffff81c02c27>] blk_mq_end_request+0x57/0x120 [ 701.827081] [<ffffffff81c03670>] __blk_mq_complete_request+0x310/0x590 [ 701.827084] [<ffffffff812348d8>] ? set_next_entity+0x2f8/0x2ed0 [ 701.827088] [<ffffffff8124b34d>] ? put_prev_entity+0x22d/0x2a70 [ 701.827091] [<ffffffff81c0394b>] blk_mq_complete_request+0x5b/0x80 [ 701.827094] [<ffffffff821e2a33>] loop_queue_work+0x273/0x19d0 [ 701.827098] [<ffffffff811f6578>] ? finish_task_switch+0x1c8/0x8e0 [ 701.827101] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0 [ 701.827104] [<ffffffff821e27c0>] ? lo_read_simple+0x890/0x890 [ 701.827108] [<ffffffff8129dd60>] ? debug_check_no_locks_freed+0x350/0x350 [ 701.827111] [<ffffffff811f63b0>] ? __hrtick_start+0x130/0x130 [ 701.827115] [<ffffffff82a0c8f6>] ? __schedule+0x936/0x20b0 [ 701.827118] [<ffffffff811dd6bd>] ? kthread_worker_fn+0x3ed/0x8d0 [ 701.827121] [<ffffffff811dd4ed>] ? kthread_worker_fn+0x21d/0x8d0 [ 701.827125] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0 [ 701.827128] [<ffffffff811dd57f>] kthread_worker_fn+0x2af/0x8d0 [ 701.827132] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827135] [<ffffffff82a1ea46>] ? _raw_spin_unlock_irqrestore+0x36/0x60 [ 701.827138] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827141] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827144] [<ffffffff811dd00b>] kthread+0x24b/0x3a0 [ 701.827148] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827151] [<ffffffff8129d70d>] ? trace_hardirqs_on+0xd/0x10 [ 701.827155] [<ffffffff8116d41d>] ? do_group_exit+0xdd/0x350 [ 701.827158] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827161] [<ffffffff82a1f52f>] ret_from_fork+0x3f/0x70 [ 701.827165] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827167] Memory state around the buggy address: [ 701.827170] ffff880080b95e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827172] ffff880080b95f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827175] >ffff880080b95f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827177] ^ [ 701.827179] ffff880080b96000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827182] ffff880080b96080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827183] ================================================================== The problem is that bio_check_pages_dirty calls bio_put, so we must not access bio fields after bio_check_pages_dirty. Fixes: 9b81c842355ac96097ba ("block: don't access bio->bi_error after bio_put()"). Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2016-01-22wrappers for ->i_mutex accessAl Viro1-4/+4
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08fix the regression from "direct-io: Fix negative return from dio read beyond ↵Al Viro1-0/+1
eof" Sure, it's better to bail out of past-the-eof read and return 0 than return a bogus negative value on such. Only we'd better make sure we are bailing out with 0 and not -ENOMEM... Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-30direct-io: Fix negative return from dio read beyond eofJan Kara1-1/+9
Assume a filesystem with 4KB blocks. When a file has size 1000 bytes and we issue direct IO read at offset 1024, blockdev_direct_IO() reads the tail of the last block and the logic for handling short DIO reads in dio_complete() results in a return value -24 (1000 - 1024) which obviously confuses userspace. Fix the problem by bailing out early once we sample i_size and can reliably check that direct IO read starts beyond i_size. Reported-by: Avi Kivity <avi@scylladb.com> Fixes: 9fe55eea7e4b444bafc42fa0000cc2d1d2847275 CC: stable@vger.kernel.org CC: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-10Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+10
Pull block IO poll support from Jens Axboe: "Various groups have been doing experimentation around IO polling for (really) fast devices. The code has been reviewed and has been sitting on the side for a few releases, but this is now good enough for coordinated benchmarking and further experimentation. Currently O_DIRECT sync read/write are supported. A framework is in the works that allows scalable stats tracking so we can auto-tune this. And we'll add libaio support as well soon. Fow now, it's an opt-in feature for test purposes" * 'for-4.4/io-poll' of git://git.kernel.dk/linux-block: direct-io: be sure to assign dio->bio_bdev for both paths directio: add block polling support NVMe: add blk polling support block: add block polling support blk-mq: return tag/queue combo in the make_request_fn handlers block: change ->make_request_fn() and users to return a queue cookie
2015-11-10direct-io: be sure to assign dio->bio_bdev for both pathsJens Axboe1-3/+3
btrfs sets ->submit_io(), and we failed to set the block dev for that path. That resulted in a potential NULL dereference when we later wait for IO in dio_await_one(). Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-07directio: add block polling supportJens Axboe1-4/+10
This adds support for sync O_DIRECT read/write poll support. Signed-off-by: Jens Axboe <axboe@fb.com> [hch: split from a larger patch, minor updates] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-06mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman1-1/+1
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-23fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct readMing Lei1-3/+6
When direct read IO is submitted from kernel, it is often unnecessary to dirty pages, for example of loop, dirtying pages have been considered in the upper filesystem(over loop) side already, and they don't need to be dirtied again. So this patch doesn't dirtying pages for ITER_BVEC/ITER_KVEC direct read, and loop should be the 1st case to use ITER_BVEC/ITER_KVEC for direct read I/O. The patch is based on previous Dave's patch. Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: remove bio_get_nr_vecs()Kent Overstreet1-1/+1
We can always fill up the bio now, no need to estimate the possible size based on queue parameters. Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [hch: rebased and wrote a changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-11block: don't access bio->bi_error after bio_put()Sasha Levin1-1/+4
Commit 4246a0b6 ("block: add a bi_error field to struct bio") has added a few dereferences of 'bio' after a call to bio_put(). This causes use-after-frees such as: [521120.719695] BUG: KASan: use after free in dio_bio_complete+0x2b3/0x320 at addr ffff880f36b38714 [521120.720638] Read of size 4 by task mount.ocfs2/9644 [521120.721212] ============================================================================= [521120.722056] BUG kmalloc-256 (Not tainted): kasan: bad access detected [521120.722968] ----------------------------------------------------------------------------- [521120.722968] [521120.723915] Disabling lock debugging due to kernel taint [521120.724539] INFO: Slab 0xffffea003cdace00 objects=32 used=25 fp=0xffff880f36b38600 flags=0x46fffff80004080 [521120.726037] INFO: Object 0xffff880f36b38700 @offset=1792 fp=0xffff880f36b38800 [521120.726037] [521120.726974] Bytes b4 ffff880f36b386f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.727898] Object ffff880f36b38700: 00 88 b3 36 0f 88 ff ff 00 00 d8 de 0b 88 ff ff ...6............ [521120.728822] Object ffff880f36b38710: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.729705] Object ffff880f36b38720: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ [521120.730623] Object ffff880f36b38730: 00 00 00 00 00 00 00 00 01 00 00 00 00 02 00 00 ................ [521120.731621] Object ffff880f36b38740: 00 02 00 00 01 00 00 00 d0 f7 87 ad ff ff ff ff ................ [521120.732776] Object ffff880f36b38750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.733640] Object ffff880f36b38760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.734508] Object ffff880f36b38770: 01 00 03 00 01 00 00 00 88 87 b3 36 0f 88 ff ff ...........6.... [521120.735385] Object ffff880f36b38780: 00 73 22 ad 02 88 ff ff 40 13 e0 3c 00 ea ff ff .s".....@..<.... [521120.736667] Object ffff880f36b38790: 00 02 00 00 00 04 00 00 00 00 00 00 00 00 00 00 ................ [521120.737596] Object ffff880f36b387a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.738524] Object ffff880f36b387b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.739388] Object ffff880f36b387c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.740277] Object ffff880f36b387d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.741187] Object ffff880f36b387e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.742233] Object ffff880f36b387f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [521120.743229] CPU: 41 PID: 9644 Comm: mount.ocfs2 Tainted: G B 4.2.0-rc6-next-20150810-sasha-00039-gf909086 #2420 [521120.744274] ffff880f36b38000 ffff880d89c8f638 ffffffffb6e9ba8a ffff880101c0e5c0 [521120.745025] ffff880d89c8f668 ffffffffad76a313 ffff880101c0e5c0 ffffea003cdace00 [521120.745908] ffff880f36b38700 ffff880f36b38798 ffff880d89c8f690 ffffffffad772854 [521120.747063] Call Trace: [521120.747520] dump_stack (lib/dump_stack.c:52) [521120.748053] print_trailer (mm/slub.c:653) [521120.748582] object_err (mm/slub.c:660) [521120.749079] kasan_report_error (include/linux/kasan.h:20 mm/kasan/report.c:152 mm/kasan/report.c:194) [521120.750834] __asan_report_load4_noabort (mm/kasan/report.c:250) [521120.753580] dio_bio_complete (fs/direct-io.c:478) [521120.755752] do_blockdev_direct_IO (fs/direct-io.c:494 fs/direct-io.c:1291) [521120.759765] __blockdev_direct_IO (fs/direct-io.c:1322) [521120.761658] blkdev_direct_IO (fs/block_dev.c:162) [521120.762993] generic_file_read_iter (mm/filemap.c:1738) [521120.767405] blkdev_read_iter (fs/block_dev.c:1649) [521120.768556] __vfs_read (fs/read_write.c:423 fs/read_write.c:434) [521120.772126] vfs_read (fs/read_write.c:454) [521120.773118] SyS_pread64 (fs/read_write.c:607 fs/read_write.c:594) [521120.776062] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:186) [521120.777375] Memory state around the buggy address: [521120.778118] ffff880f36b38600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.779211] ffff880f36b38680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.780315] >ffff880f36b38700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.781465] ^ [521120.782083] ffff880f36b38780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [521120.783717] ffff880f36b38800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [521120.784818] ================================================================== This patch fixes a few of those places that I caught while auditing the patch, but the original patch should be audited further for more occurences of this issue since I'm not too familiar with the code. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig1-7/+6
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-24direct-io: only inc/dec inode->i_dio_count for file systemsJens Axboe1-2/+5
do_blockdev_direct_IO() increments and decrements the inode ->i_dio_count for each IO operation. It does this to protect against truncate of a file. Block devices don't need this sort of protection. For a capable multiqueue setup, this atomic int is the only shared state between applications accessing the device for O_DIRECT, and it presents a scaling wall for that. In my testing, as much as 30% of system time is spent incrementing and decrementing this value. A mixed read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with better latencies too. Before: clat percentiles (usec): | 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34], | 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35], | 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80], | 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155], | 99.99th=[ 165] After: clat percentiles (usec): | 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149], | 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171], | 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270], | 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422], | 99.99th=[ 438] In other setups, Robert Elliott reported seeing good performance improvements: https://lkml.org/lkml/2015/4/3/557 The more applications accessing the device, the worse it gets. Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells do_blockdev_direct_IO() that it need not worry about incrementing or decrementing the inode i_dio_count for this caller. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Elliott, Robert (Server Storage) <elliott@hp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11Remove rw from {,__,do_}blockdev_direct_IO()Omar Sandoval1-21/+18
Most filesystems call through to these at some point, so we'll start here. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25fs: move struct kiocb to fs.hChristoph Hellwig1-1/+0
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-13fs: split generic and aio kiocbChristoph Hellwig1-2/+2
Most callers in the kernel want to perform synchronous file I/O, but still have to bloat the stack with a full struct kiocb. Split out the parts needed in filesystem code from those in the aio code, and only allocate those needed to pass down argument on the stack. The aio code embedds the generic iocb in the one it allocates and can easily get back to it by using container_of. Also add a ->ki_complete method to struct kiocb, this is used to call into the aio code and thus removes the dependency on aio for filesystems impementing asynchronous operations. It will also allow other callers to substitute their own completion callback. We also add a new ->ki_flags field to work around the nasty layering violation recently introduced in commit 5e33f6 ("usb: gadget: ffs: add eventfd notification about ffs events"). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26fuse: honour max_read and max_write in direct_io modeMiklos Szeredi1-1/+1
The third argument of fuse_get_user_pages() "nbytesp" refers to the number of bytes a caller asked to pack into fuse request. This value may be lesser than capacity of fuse request or iov_iter. So fuse_get_user_pages() must ensure that *nbytesp won't grow. Now, when helper iov_iter_get_pages() performs all hard work of extracting pages from iov_iter, it can be done by passing properly calculated "maxsize" to the helper. The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need this capability, so pass LONG_MAX as the maxsize argument here. Fixes: c9c37e2e6378 ("fuse: switch to iov_iter_get_pages()") Reported-by: Werner Baumann <werner.baumann@onlinehome.de> Tested-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07switch iov_iter_get_pages() to passing maximal number of pagesAl Viro1-1/+1
... instead of maximal size. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-01direct-io: fix AIO regressionChristoph Hellwig1-5/+4
The direct-io.c rewrite to use the iov_iter infrastructure stopped updating the size field in struct dio_submit, and thus rendered the check for allowing asynchronous completions to always return false. Fix this by comparing it to the count of bytes in the iov_iter instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Tim Chen <tim.c.chen@linux.intel.com> Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
2014-07-24direct-io: fix uninitialized warning in do_direct_IO()Boaz Harrosh1-7/+7
The following warnings: fs/direct-io.c: In function ‘__blockdev_direct_IO’: fs/direct-io.c:1011:12: warning: ‘to’ may be used uninitialized in this function [-Wmaybe-uninitialized] fs/direct-io.c:913:16: note: ‘to’ was declared here fs/direct-io.c:1011:12: warning: ‘from’ may be used uninitialized in this function [-Wmaybe-uninitialized] fs/direct-io.c:913:10: note: ‘from’ was declared here are false positive because dio_get_page() either fails, or sets both 'from' and 'to'. Paul Bolle said ... Maybe it's better to move initializing "to" and "from" out of dio_get_page(). That _might_ make it easier for both the the reader and the compiler to understand what's going on. Something like this: Christoph Hellwig said ... The fix of moving the code definitively looks nicer, while I think uninitialized_var is horrible wart that won't get anywhere near my code. Boaz Harrosh: I agree with Christoph and Paul Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-06new helper: iov_iter_npages()Al Viro1-8/+1
counts the pages covered by iov_iter, up to given limit. do_block_direct_io() and fuse_iter_npages() switched to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new helper: iov_iter_get_pages()Al Viro1-73/+38
iov_iter_get_pages(iter, pages, maxsize, &start) grabs references pinning the pages of up to maxsize of (contiguous) data from iter. Returns the amount of memory grabbed or -error. In case of success, the requested area begins at offset start in pages[0] and runs through pages[1], etc. Less than requested amount might be returned - either because the contiguous area in the beginning of iterator is smaller than requested, or because the kernel failed to pin that many pages. direct-io.c switched to using iov_iter_get_pages() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06dio: take updating ->result into do_direct_IO()Al Viro1-4/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06new primitive: iov_iter_alignment()Al Viro1-22/+5
returns the value aligned as badly as the worst remaining segment in iov_iter is. Use instead of open-coded equivalents. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06switch {__,}blockdev_direct_IO() to iov_iterAl Viro1-17/+16
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04Merge tag 'xfs-for-linus-3.15-rc1' of git://oss.sgi.com/xfs/xfsLinus Torvalds1-6/+12
Pull xfs update from Dave Chinner: "There are a couple of new fallocate features in this request - it was decided that it was easiest to push them through the XFS tree using topic branches and have the ext4 support be based on those branches. Hence you may see some overlap with the ext4 tree merge depending on how they including those topic branches into their tree. Other than that, there is O_TMPFILE support, some cleanups and bug fixes. The main changes in the XFS tree for 3.15-rc1 are: - O_TMPFILE support - allowing AIO+DIO writes beyond EOF - FALLOC_FL_COLLAPSE_RANGE support for fallocate syscall and XFS implementation - FALLOC_FL_ZERO_RANGE support for fallocate syscall and XFS implementation - IO verifier cleanup and rework - stack usage reduction changes - vm_map_ram NOIO context fixes to remove lockdep warings - various bug fixes and cleanups" * tag 'xfs-for-linus-3.15-rc1' of git://oss.sgi.com/xfs/xfs: (34 commits) xfs: fix directory hash ordering bug xfs: extra semi-colon breaks a condition xfs: Add support for FALLOC_FL_ZERO_RANGE fs: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate xfs: inode log reservations are still too small xfs: xfs_check_page_type buffer checks need help xfs: avoid AGI/AGF deadlock scenario for inode chunk allocation xfs: use NOIO contexts for vm_map_ram xfs: don't leak EFSBADCRC to userspace xfs: fix directory inode iolock lockdep false positive xfs: allocate xfs_da_args to reduce stack footprint xfs: always do log forces via the workqueue xfs: modify verifiers to differentiate CRC from other errors xfs: print useful caller information in xfs_error_report xfs: add xfs_verifier_error() xfs: add helper for updating checksums on xfs_bufs xfs: add helper for verifying checksums on xfs_bufs xfs: Use defines for CRC offsets in all cases xfs: skip pointless CRC updates after verifier failures xfs: Add support FALLOC_FL_COLLAPSE_RANGE for fallocate ...
2014-04-03fs/direct-io.c: remove redundant comparisonGu Zheng1-1/+0
The return value of bio_get_nr_vecs() cannot be bigger than BIO_MAX_PAGES, so we can remove redundant the comparison between nr_pages and BIO_MAX_PAGES. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10direct-io: add flag to allow aio writes beyond i_sizeChristoph Hellwig1-6/+12
Some filesystems can handle direct I/O writes beyond i_size safely, so allow them to opt into receiving them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-11-23block: Abstract out bvec iteratorKent Overstreet1-2/+2
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-09-09direct-io: Use return from cmpxchg to decide of assignment happenedOlof Johansson1-2/+3
Not using the return value can in the generic case be racy, so it's in general good practice to check the return value instead. This also resolved the warning caused on ARM and other architectures: fs/direct-io.c: In function 'sb_init_dio_done_wq': fs/direct-io.c:557:2: warning: value computed is not used [-Wunused-value] Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: H Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-04direct-io: Handle O_(D)SYNC AIOChristoph Hellwig1-9/+36
Call generic_write_sync() from the deferred I/O completion handler if O_DSYNC is set for a write request. Also make sure various callers don't call generic_write_sync if the direct I/O code returns -EIOCBQUEUED. Based on an earlier patch from Jan Kara <jack@suse.cz> with updates from Jeff Moyer <jmoyer@redhat.com> and Darrick J. Wong <darrick.wong@oracle.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04direct-io: Implement generic deferred AIO completionsChristoph Hellwig1-16/+69
Add support to the core direct-io code to defer AIO completions to user context using a workqueue. This replaces opencoded and less efficient code in XFS and ext4 (we save a memory allocation for each direct IO) and will be needed to properly support O_(D)SYNC for AIO. The communication between the filesystem and the direct I/O code requires a new buffer head flag, which is a bit ugly but not avoidable until the direct I/O code stops abusing the buffer_head structure for communicating with the filesystems. Currently this creates a per-superblock unbound workqueue for these completions, which is taken from an earlier patch by Jan Kara. I'm not really convinced about this use and would prefer a "normal" global workqueue with a high concurrency limit, but this needs further discussion. JK: Fixed ext4 part, dynamic allocation of the workqueue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+4
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-07aio: don't include aio.h in sched.hKent Overstreet1-0/+1
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29direct-io: submit bio after boundary buffer is added to itJan Kara1-17/+11
Currently, dio_send_cur_page() submits bio before current page and cached sdio->cur_page is added to the bio if sdio->boundary is set. This is actually wrong because sdio->boundary means the current buffer is the last one before metadata needs to be read. So we should rather submit the bio after the current page is added to it. Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29direct-io: fix boundary block handlingJan Kara1-1/+2
When we read/write a file sequentially, we will read/write not only the data blocks but also the indirect blocks that may not be physically adjacent to the data blocks. So filesystems set the BH_Boundary flag to submit the previous I/O before reading/writing an indirect block. However the generic direct IO code mishandles buffer_boundary(), setting sdio->boundary before each submit_page_section() call which results in sending only one page bios as underlying code thinks this page is the last in the contiguous extent. So fix the problem by setting sdio->boundary only if the current page is really the last one in the mapped extent. With this patch and "direct-io: submit bio after boundary buffer is added to it" I've measured about 10% throughput improvement of direct IO reads on ext3 with SATA harddrive (from 90 MB/s to 100 MB/s). With ramdisk, the improvement was about 3-fold (from 350 MB/s to 1.2 GB/s). For other filesystems (such as ext4), the improvements won't be as visible because the frequency of BH_Boundary flag being set is much smaller. Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23block: Convert some code to bio_for_each_segment_all()Kent Overstreet1-4/+4
More prep work for immutable bvecs: A few places in the code were either open coding or using the wrong version - fix. After we introduce the bvec iter, it'll no longer be possible to modify the biovec through bio_for_each_segment_all() - it doesn't increment a pointer to the current bvec, you pass in a struct bio_vec (not a pointer) which is updated with what the current biovec would be (taking into account bi_bvec_done and bi_size). So because of that it's more worthwhile to be consistent about bio_for_each_segment()/bio_for_each_segment_all() usage. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Alexander Viro <viro@zeniv.linux.org.uk>
2013-02-22fs: Fix possible use-after-free with AIOJan Kara1-1/+1
Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. CC: Christoph Hellwig <hch@infradead.org> CC: Jens Axboe <axboe@kernel.dk> CC: Jeff Moyer <jmoyer@redhat.com> CC: stable@vger.kernel.org Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29direct-io: don't read inode->i_blkbits multiple timesLinus Torvalds1-3/+5
Since directio can work on a raw block device, and the block size of the device can change under it, we need to do the same thing that fs/buffer.c now does: read the block size a single time, using ACCESS_ONCE(). Reading it multiple times can get different results, which will then confuse the code because it actually encodes the i_blksize in relationship to the underlying logical blocksize. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-09block: move down direct IO pluggingFengguang Wu1-0/+5
Move unplugging for direct I/O from around ->direct_IO() down to do_blockdev_direct_IO(). This implicitly adds plugging for direct writes. CC: Li Shaohua <shli@fusionio.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-14fs/direct-io.c: adjust suspicious bit operationJulia Lawall1-1/+1
READ is 0, so the result of the bit-and operation is 0. Rewrite with == as done elsewhere in the same file. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-31NFS: Ensure that setattr and getattr wait for O_DIRECT write completionTrond Myklebust1-44/+0
Use the same mechanism as the block devices are using, but move the helper functions from fs/direct-io.c into fs/inode.c to remove the dependency on CONFIG_BLOCK. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Fred Isaman <iisaman@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-23Restore direct_io / truncate locking APIAnton Altaparmakov1-2/+2
With kernel 3.1, Christoph removed i_alloc_sem and replaced it with calls (namely inode_dio_wait() and inode_dio_done()) which are EXPORT_SYMBOL_GPL() thus they cannot be used by non-GPL file systems and further inode_dio_wait() was pushed from notify_change() into the file system ->setattr() method but no non-GPL file system can make this call. That means non-GPL file systems cannot exist any more unless they do not use any VFS functionality related to reading/writing as far as I can tell or at least as long as they want to implement direct i/o. Both Linus and Al (and others) have said on LKML that this breakage of the VFS API should not have happened and that the change was simply missed as it was not documented in the change logs of the patches that did those changes. This patch changes the two function exports in question to be EXPORT_SYMBOL() thus restoring the VFS API as it used to be - accessible for all modules. Christoph, who introduced the two functions and exported them GPL-only is CC-ed on this patch to give him the opportunity to object to the symbols being changed in this manner if he did indeed intend them to be GPL-only and does not want them to become available to all modules. Signed-off-by: Anton Altaparmakov <anton@tuxera.com> CC: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12dio: optimize cache misses in the submission pathAndi Kleen1-9/+37
Some investigation of a transaction processing workload showed that a major consumer of cycles in __blockdev_direct_IO is the cache miss while accessing the block size. This is because it has to walk the chain from block_dev to gendisk to queue. The block size is needed early on to check alignment and sizes. It's only done if the check for the inode block size fails. But the costly block device state is unconditionally fetched. - Reorganize the code to only fetch block dev state when actually needed. Then do a prefetch on the block dev early on in the direct IO path. This is worth it, because there is substantial code run before we actually touch the block dev now. - I also added some unlikelies to make it clear the compiler that block device fetch code is not normally executed. This gave a small, but measurable improvement on a large database benchmark (about 0.3%) [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: using prefetch requires including prefetch.h] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12fs/direct-io.c: calculate fs_count correctly in get_more_blocks()Tao Ma1-7/+4
In get_more_blocks(), we use dio_count to calcuate fs_count and do some tricky things to increase fs_count if dio_count isn't aligned. But actually it still has some corner cases that can't be coverd. See the following example: dio_write foo -s 1024 -w 4096 (direct write 4096 bytes at offset 1024). The same goes if the offset isn't aligned to fs_blocksize. In this case, the old calculation counts fs_count to be 1, but actually we will write into 2 different blocks (if fs_blocksize=4096). The old code just works, since it will call get_block twice (and may have to allocate and create extents twice for filesystems like ext4). So we'd better call get_block just once with the proper fs_count. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-28direct-io: merge direct_io_walker into __blockdev_direct_IOAndi Kleen1-139/+132
This doesn't change anything for the compiler, but hch thought it would make the code clearer. I moved the reference counting into its own little inline. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 05:20:23 +0000