| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently
not allowed to create blocks for an empty inode. This confusion comes
from trying to bit shift a negative number, so check the size of the
inode first.
The problem is most visible for hfsplus, because the fallback to
buffered I/O doesn't happen and the write fails with EIO. This is in
part the fault of the module, because it gives a wrong return value on
->get_block(); that will be fixed in a separate patch.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.
* tag 'v4.20-rc5': (664 commits)
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
...
|
|
commit e259221763a40403d5bb232209998e8c45804ab8 ("fs: simplify the
generic_write_sync prototype") reworked callers of generic_write_sync(),
and ended up dropping the error return for the directio path. Prior to
that commit, in dio_complete(), an error would be bubbled up the stack,
but after that commit, errors passed on to dio_complete were eaten up.
This was reported on the list earlier, and a fix was proposed in
https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but
never followed up with. We recently hit this bug in our testing where
fencing io errors, which were previously erroring out with EIO, were
being returned as success operations after this commit.
The fix proposed on the list earlier was a little short -- it would have
still called generic_write_sync() in case `ret` already contained an
error. This fix ensures generic_write_sync() is only called when there's
no pending error in the write. Additionally, transferred is replaced
with ret to bring this code in line with other callers.
Fixes: e259221763a4 ("fs: simplify the generic_write_sync prototype")
Reported-by: Ravi Nankani <rnankani@amazon.com>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: Torsten Mehlan <tomeh@amazon.de>
CC: Uwe Dannowski <uwed@amazon.de>
CC: Amit Shah <aams@amazon.de>
CC: David Woodhouse <dwmw@amazon.co.uk>
CC: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.
Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We use IOCB_HIPRI to poll for IO in the caller instead of scheduling.
This information is not available for (or after) IO submission. The
driver may make different queue choices based on the type of IO, so
make the fact that we will poll for this IO known to the lower layers
as well.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use accessor functions to access an iterator's type and direction. This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Same numerical value (for now at least), but a much better documentation
of intent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- the v9fs maintainers have been missing for a long time. I've taken
over v9fs patch slinging.
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits)
mm,oom_reaper: check for MMF_OOM_SKIP before complaining
mm/ksm: fix interaction with THP
mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t
headers: untangle kmemleak.h from mm.h
include/linux/mmdebug.h: make VM_WARN* non-rvals
mm/page_isolation.c: make start_isolate_page_range() fail if already isolated
mm: change return type to vm_fault_t
mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes
mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory
kernel/fork.c: detect early free of a live mm
mm: make counting of list_lru_one::nr_items lockless
mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static
block_invalidatepage(): only release page if the full page was invalidated
mm: kernel-doc: add missing parameter descriptions
mm/swap.c: remove @cold parameter description for release_pages()
mm/nommu: remove description of alloc_vm_area
zram: drop max_zpage_size and use zs_huge_class_size()
zsmalloc: introduce zs_huge_class_size()
mm: fix races between swapoff and flush dcache
fs/direct-io.c: minor cleanups in do_blockdev_direct_IO
...
|
|
We already get the block counts and calculate the end block at the
beginning of the function. Let's use the local variables for
consistency and readability. No functional changes
[akpm@linux-foundation.org: constify the locals to prevent future slipups]
Link: http://lkml.kernel.org/r/1519638870-17756-1-git-send-email-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This flag was added by fe0f07d08ee3 ("direct-io: only inc/deci
inode->i_dio_count for file systems") as means to optimise the atomic
modificaiton of the variable for blockdevices. However with the advent
of 542ff7bf18c6 ("block: new direct I/O implementation") it became
unused. So let's remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This flag was added by 6039257378e4 ("direct-io: add flag to allow aio
writes beyond i_size") to support XFS. However, with the rework of
XFS' DIO's path to use iomap in acdda3aae146 ("xfs: use iomap_dio_rw")
it became redundant. So let's remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit e864f39569f4 "fs: add RWF_DSYNC aand RWF_SYNC" added additional
way for direct IO to become synchronous and thus trigger fsync from the
IO completion handler. Then commit 9830f4be159b "fs: Use RWF_* flags for
AIO operations" allowed these flags to be set for AIO as well. However
that commit forgot to update the condition checking whether the IO
completion handling should be defered to a workqueue and thus AIO DIO
with RWF_[D]SYNC set will call fsync() from IRQ context resulting in
sleep in atomic.
Fix the problem by checking directly iocb flags (the same way as it is
done in dio_complete()) instead of checking all conditions that could
lead to IO being synchronous.
CC: Christoph Hellwig <hch@lst.de>
CC: Goldwyn Rodrigues <rgoldwyn@suse.com>
CC: stable@vger.kernel.org
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 9830f4be159b29399d107bffb99e0132bc5aedd4
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If two programs simultaneously try to write to the same part of a file
via direct IO and buffered IO, there's a chance that the post-diowrite
pagecache invalidation will fail on the dirty page. When this happens,
the dio write succeeded, which means that the page cache is no longer
coherent with the disk!
Programs are not supposed to mix IO types and this is a clear case of
data corruption, so store an EIO which will be reflected to userspace
during the next fsync. Replace the WARN_ON with a ratelimited pr_crit
so that the developers have /some/ kind of breadcrumb to track down the
offending program(s) and file(s) involved.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
|
|
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
|
|
That we we can also poll non blk-mq queues. Mostly needed for
the NVMe multipath code, but could also be useful elsewhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull xfs fixes from Darrick Wong:
- fix some more CONFIG_XFS_RT related build problems
- fix data loss when writeback at eof races eofblocks gc and loses
- invalidate page cache after fs finishes a dio write
- remove dirty page state when invalidating pages so releasepage does
the right thing when handed a dirty page
* tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: move two more RT specific functions into CONFIG_XFS_RT
xfs: trim writepage mapping to within eof
fs: invalidate page cache after end_io() in dio completion
xfs: cancel dirty pages on invalidation
|
|
Pull block fixes from Jens Axboe:
"Three small fixes:
- A fix for skd, it was using kfree() to free a structure allocate
with kmem_cache_alloc().
- Stable fix for nbd, fixing a regression using the normal ioctl
based tools.
- Fix for a previous fix in this series, that fixed up
inconsistencies between buffered and direct IO"
* 'for-linus' of git://git.kernel.dk/linux-block:
fs: Avoid invalidation in interrupt context in dio_complete()
nbd: don't set the device size until we're connected
skd: Use kmem_cache_free
|
|
Currently we try to defer completion of async DIO to the process context
in case there are any mapped pages associated with the inode so that we
can invalidate the pages when the IO completes. However the check is racy
and the pages can be mapped afterwards. If this happens we might end up
calling invalidate_inode_pages2_range() in dio_complete() in interrupt
context which could sleep. This can be reproduced by generic/451.
Fix this by passing the information whether we can or can't invalidate
to the dio_complete(). Thanks Eryu Guan for reporting this and Jan Kara
for suggesting a fix.
Fixes: 332391a9935d ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO")
Reported-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 332391a9935d ("fs: Fix page cache inconsistency when mixing
buffered and AIO DIO") moved page cache invalidation from
iomap_dio_rw() to iomap_dio_complete() for iomap based direct write
path, but before the dio->end_io() call, and it re-introdued the bug
fixed by commit c771c14baa33 ("iomap: invalidate page caches should
be after iomap_dio_complete() in direct write").
I found this because fstests generic/418 started failing on XFS with
v4.14-rc3 kernel, which is the regression test for this specific
bug.
So similarly, fix it by moving dio->end_io() (which does the
unwritten extent conversion) before page cache invalidation, to make
sure next buffer read reads the final real allocations not unwritten
extents. I also add some comments about why should end_io() go first
in case we get it wrong again in the future.
Note that, there's no such problem in the non-iomap based direct
write path, because we didn't remove the page cache invalidation
after the ->direct_IO() in generic_file_direct_write() call, but I
decided to fix dio_complete() too so we don't leave a landmine
there, also be consistent with iomap_dio_complete().
Fixes: 332391a9935d ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO")
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
|
|
In the code added to function submit_page_section by commit b1058b981,
sdio->bio can currently be NULL when calling dio_bio_submit. This then
leads to a NULL pointer access in dio_bio_submit, so check for a NULL
bio in submit_page_section before trying to submit it instead.
Fixes xfstest generic/250 on gfs2.
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currently when mixing buffered reads and asynchronous direct writes it
is possible to end up with the situation where we have stale data in the
page cache while the new data is already written to disk. This is
permanent until the affected pages are flushed away. Despite the fact
that mixing buffered and direct IO is ill-advised it does pose a thread
for a data integrity, is unexpected and should be fixed.
Fix this by deferring completion of asynchronous direct writes to a
process context in the case that there are mapped pages to be found in
the inode. Later before the completion in dio_complete() invalidate
the pages in question. This ensures that after the completion the pages
in the written area are either unmapped, or populated with up-to-date
data. Also do the same for the iomap case which uses
iomap_dio_complete() instead.
This has a side effect of deferring the completion to a process context
for every AIO DIO that happens on inode that has pages mapped. However
since the consensus is that this is ill-advised practice the performance
implication should not be a problem.
This was based on proposal from Jeff Moyer, thanks!
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A new bio operation flag REQ_NOWAIT is introduced to identify bio's
orignating from iocb with IOCB_NOWAIT. This flag indicates
to return immediately if a request cannot be made instead
of retrying.
Stacked devices such as md (the ones with make_request_fn hooks)
currently are not supported because it may block for housekeeping.
For example, an md can have a part of the device suspended.
For this reason, only request based devices are supported.
In the future, this feature will be expanded to stacked devices
by teaching them how to handle the REQ_NOWAIT flags.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Only read bio->bi_error once in the common path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.
This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'
Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.
[geliangtang@gmail.com: truncate: use i_blocksize()]
Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The code currently uses sdio->blkbits to compute the number of blocks to
be cleaned. However sdio->blkbits is derived from the logical block size
of the underlying block device (Refer to the definition of
do_blockdev_direct_IO()). Due to this, generic/299 test would rarely
fail when executed on an ext4 filesystem with 64k as the block size and
when using a virtio based disk (having 512 byte as the logical block
size) inside a kvm guest.
This commit fixes the bug by using inode->i_blkbits to compute the
number of blocks to be cleaned.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixed up by Jeff Moyer to only use/evaluate inode->i_blkbits once,
to avoid issues with block size changes with IO in flight.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There is quite a varied bunch of stuff in this update, and some of it
you will have already merged through the ext4 tree which imported the
dax-4.10-iomap-pmd topic branch from the XFS tree.
There is also a new direct IO implementation that uses the iomap
infrastructure. It's much simpler, faster, and has lower IO latency
than the existing direct IO infrastructure.
Summary:
- DAX PMD faults via iomap infrastructure
- Direct-io support in iomap infrastructure
- removal of now-redundant XFS inode iolock, replaced with VFS
i_rwsem
- synchronisation with fixes and changes in userspace libxfs code
- extent tree lookup helpers
- lots of little corruption detection improvements to verifiers
- optimised CRC calculations
- faster buffer cache lookups
- deprecation of barrier/nobarrier mount options - we always use
REQ_FUA/REQ_FLUSH where appropriate for data integrity now
- cleanups to speculative preallocation
- miscellaneous minor bug fixes and cleanups"
* tag 'xfs-for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (63 commits)
xfs: nuke unused tracepoint definitions
xfs: use GPF_NOFS when allocating btree cursors
xfs: use xfs_vn_setattr_size to check on new size
xfs: deprecate barrier/nobarrier mount option
xfs: Always flush caches when integrity is required
xfs: ignore leaf attr ichdr.count in verifier during log replay
xfs: use rhashtable to track buffer cache
xfs: optimise CRC updates
xfs: make xfs btree stats less huge
xfs: don't cap maximum dedupe request length
xfs: don't allow di_size with high bit set
xfs: error out if trying to add attrs and anextents > 0
xfs: don't crash if reading a directory results in an unexpected hole
xfs: complain if we don't get nextents bmap records
xfs: check for bogus values in btree block headers
xfs: forbid AG btrees with level == 0
xfs: several xattr functions can be void
xfs: handle cow fork in xfs_bmap_trace_exlist
xfs: pass state not whichfork to trace_xfs_extlist
xfs: Move AGI buffer type setting to xfs_read_agi
...
|
|
Pull fs meta data unmap optimization from Jens Axboe:
"A series from Jan Kara, providing a more efficient way for unmapping
meta data from in the buffer cache than doing it block-by-block.
Provide a general helper that existing callers can use"
* 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block:
fs: Remove unmap_underlying_metadata
fs: Add helper to clean bdev aliases under a bh and use it
ext2: Use clean_bdev_aliases() instead of iteration
ext4: Use clean_bdev_aliases() instead of iteration
direct-io: Use clean_bdev_aliases() instead of handmade iteration
fs: Provide function to unmap metadata for a range of blocks
|
|
We want to use the per-sb completion workqueue from the new iomap
direct I/O code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The poll code is blk-mq specific, let's move it to blk-mq.c. This
is a prep patch for improving the polling code.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Use new provided function instead of an iteration through all allocated
blocks.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Make local filesystems treat a fault as shortened IO,
returning -EFAULT only if nothing had been transferred.
That's how everything else (NFS, FUSE, ceph, Lustre)
behaves.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch has the dio code use a REQ_OP for the op and rq_flag_bits
for bi_rw flags. To set/get the op it uses the bio_set_op_attrs/bio_op
accssors.
It also begins to convert btrfs's dio_submit_t because of the dio
submit_io callout use. The next patches will completely convert
this code and the reset of the btrfs code paths.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently direct writes inside i_size on a DIO_SKIP_HOLES filesystem are
not allowed to allocate blocks(get_more_blocks() sets 'create' to 0
before calling get_block() callback), if it's a sparse file, direct
writes fall back to buffered writes to avoid stale data exposure from
concurrent buffered read. But there're two cases that can result in
stale data exposure are not correctly detected.
1. The detection for "writing inside i_size" is not sufficient,
writes can be treated as "extending writes" wrongly. For example,
direct write 1FSB (file system block) to a 1FSB sparse file on
ext2/3/4, starting from offset 0, in this case it's writing inside
i_size, but 'create' is non-zero, because 'block_in_file' and
'(i_size_read(inode) >> blkbits' are both zero.
2. Direct writes starting from or beyong i_size (not inside i_size)
also could trigger block allocation and expose stale data. For
example, consider a sparse file with i_size of 2k, and a write to
offset 2k or 3k into the file, with a filesystem block size of 4k.
(Thanks to Jeff Moyer for pointing this case out in his review.)
The first problem can be demostrated by running ltp-aiodio test ADSP045
many times. When testing on extN filesystems, I see test failures
occasionally, buffered read could read non-zero (stale) data.
ADSP045: dio_sparse -a 4k -w 4k -s 2k -n 1
dio_sparse 0 TINFO : Dirtying free blocks
dio_sparse 0 TINFO : Starting I/O tests
non zero buffer at buf[0] => 0xffffffaa,ffffffaa,ffffffaa,ffffffaa
non-zero read at offset 0
dio_sparse 0 TINFO : Killing childrens(s)
dio_sparse 1 TFAIL : dio_sparse.c:191: 1 children(s) exited abnormally
The second problem can also be reproduced easily by a hacked dio_sparse
program, which accepts an option to specify the write offset.
What we should really do is to disable block allocation for writes that
could result in filling holes inside i_size.
Link: http://lkml.kernel.org/r/1463156728-13357-1-git-send-email-guaneryu@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kiocb already has the new position, so use that. The only interesting
case is AIO, where we currently don't bother updating ki_pos. We're about
to free the kiocb after we're done, so we might as well update it to make
everyone's life simpler.
While we're at it also return the bytes written argument passed in if
we were successful so that the boilerplate error switch code in the
callers can go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.
XXX: Will need a few additional audits for O_DSYNC
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It has to be identical to ki_pos of the iocb, so use that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There's quite a lot in this request, and there's some cross-over with
ext4, dax and quota code due to the nature of the changes being made.
As for the rest of the XFS changes, there are lots of little things
all over the place, which add up to a lot of changes in the end.
The major changes are that we've reduced the size of the struct
xfs_inode by ~100 bytes (gives an inode cache footprint reduction of
>10%), the writepage code now only does a single set of mapping tree
lockups so uses less CPU, delayed allocation reservations won't
overrun under random write loads anymore, and we added compile time
verification for on-disk structure sizes so we find out when a commit
or platform/compiler change breaks the on disk structure as early as
possible.
Change summary:
- error propagation for direct IO failures fixes for both XFS and
ext4
- new quota interfaces and XFS implementation for iterating all the
quota IDs in the filesystem
- locking fixes for real-time device extent allocation
- reduction of duplicate information in the xfs and vfs inode, saving
roughly 100 bytes of memory per cached inode.
- buffer flag cleanup
- rework of the writepage code to use the generic write clustering
mechanisms
- several fixes for inode flag based DAX enablement
- rework of remount option parsing
- compile time verification of on-disk format structure sizes
- delayed allocation reservation overrun fixes
- lots of little error handling fixes
- small memory leak fixes
- enable xfsaild freezing again"
* tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits)
xfs: always set rvalp in xfs_dir2_node_trim_free
xfs: ensure committed is initialized in xfs_trans_roll
xfs: borrow indirect blocks from freed extent when available
xfs: refactor delalloc indlen reservation split into helper
xfs: update freeblocks counter after extent deletion
xfs: debug mode forced buffered write failure
xfs: remove impossible condition
xfs: check sizes of XFS on-disk structures at compile time
xfs: ioends require logically contiguous file offsets
xfs: use named array initializers for log item dumping
xfs: fix computation of inode btree maxlevels
xfs: reinitialise per-AG structures if geometry changes during recovery
xfs: remove xfs_trans_get_block_res
xfs: fix up inode32/64 (re)mount handling
xfs: fix format specifier , should be %llx and not %llu
xfs: sanitize remount options
xfs: convert mount option parsing to tokens
xfs: fix two memory leaks in xfs_attr_list.c error paths
xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE
xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This way we can pass back errors to the file system, and allow for
cleanup required for all direct I/O invocations.
Also allow the ->end_io handlers to return errors on their own, so that
I/O completion errors can be passed on to the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
kasan reported the following error when i ran xfstest:
[ 701.826854] ==================================================================
[ 701.826864] BUG: KASAN: use-after-free in dio_bio_complete+0x41a/0x600 at addr ffff880080b95f94
[ 701.826870] Read of size 4 by task loop2/3874
[ 701.826879] page:ffffea000202e540 count:0 mapcount:0 mapping: (null) index:0x0
[ 701.826890] flags: 0x100000000000000()
[ 701.826895] page dumped because: kasan: bad access detected
[ 701.826904] CPU: 3 PID: 3874 Comm: loop2 Tainted: G B W L 4.5.0-rc1-next-20160129 #83
[ 701.826910] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013
[ 701.826917] ffff88008fadf800 ffff88008fadf758 ffffffff81ca67bb 0000000041b58ab3
[ 701.826941] ffffffff830d1e74 ffffffff81ca6724 ffff88008fadf748 ffffffff8161c05c
[ 701.826963] 0000000000000282 ffff88008fadf800 ffffed0010172bf2 ffffea000202e540
[ 701.826987] Call Trace:
[ 701.826997] [<ffffffff81ca67bb>] dump_stack+0x97/0xdc
[ 701.827005] [<ffffffff81ca6724>] ? _atomic_dec_and_lock+0xc4/0xc4
[ 701.827014] [<ffffffff8161c05c>] ? __dump_page+0x32c/0x490
[ 701.827023] [<ffffffff816b0d03>] kasan_report_error+0x5f3/0x8b0
[ 701.827033] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600
[ 701.827040] [<ffffffff816b1119>] __asan_report_load4_noabort+0x59/0x80
[ 701.827048] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600
[ 701.827053] [<ffffffff817c302a>] dio_bio_complete+0x41a/0x600
[ 701.827057] [<ffffffff81bd19c8>] ? blk_queue_exit+0x108/0x270
[ 701.827060] [<ffffffff817c32b0>] dio_bio_end_aio+0xa0/0x4d0
[ 701.827063] [<ffffffff817c3210>] ? dio_bio_complete+0x600/0x600
[ 701.827067] [<ffffffff81bd2806>] ? blk_account_io_completion+0x316/0x5d0
[ 701.827070] [<ffffffff81bafe89>] bio_endio+0x79/0x200
[ 701.827074] [<ffffffff81bd2c9f>] blk_update_request+0x1df/0xc50
[ 701.827078] [<ffffffff81c02c27>] blk_mq_end_request+0x57/0x120
[ 701.827081] [<ffffffff81c03670>] __blk_mq_complete_request+0x310/0x590
[ 701.827084] [<ffffffff812348d8>] ? set_next_entity+0x2f8/0x2ed0
[ 701.827088] [<ffffffff8124b34d>] ? put_prev_entity+0x22d/0x2a70
[ 701.827091] [<ffffffff81c0394b>] blk_mq_complete_request+0x5b/0x80
[ 701.827094] [<ffffffff821e2a33>] loop_queue_work+0x273/0x19d0
[ 701.827098] [<ffffffff811f6578>] ? finish_task_switch+0x1c8/0x8e0
[ 701.827101] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0
[ 701.827104] [<ffffffff821e27c0>] ? lo_read_simple+0x890/0x890
[ 701.827108] [<ffffffff8129dd60>] ? debug_check_no_locks_freed+0x350/0x350
[ 701.827111] [<ffffffff811f63b0>] ? __hrtick_start+0x130/0x130
[ 701.827115] [<ffffffff82a0c8f6>] ? __schedule+0x936/0x20b0
[ 701.827118] [<ffffffff811dd6bd>] ? kthread_worker_fn+0x3ed/0x8d0
[ 701.827121] [<ffffffff811dd4ed>] ? kthread_worker_fn+0x21d/0x8d0
[ 701.827125] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0
[ 701.827128] [<ffffffff811dd57f>] kthread_worker_fn+0x2af/0x8d0
[ 701.827132] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170
[ 701.827135] [<ffffffff82a1ea46>] ? _raw_spin_unlock_irqrestore+0x36/0x60
[ 701.827138] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170
[ 701.827141] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170
[ 701.827144] [<ffffffff811dd00b>] kthread+0x24b/0x3a0
[ 701.827148] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0
[ 701.827151] [<ffffffff8129d70d>] ? trace_hardirqs_on+0xd/0x10
[ 701.827155] [<ffffffff8116d41d>] ? do_group_exit+0xdd/0x350
[ 701.827158] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0
[ 701.827161] [<ffffffff82a1f52f>] ret_from_fork+0x3f/0x70
[ 701.827165] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0
[ 701.827167] Memory state around the buggy address:
[ 701.827170] ffff880080b95e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 701.827172] ffff880080b95f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 701.827175] >ffff880080b95f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 701.827177] ^
[ 701.827179] ffff880080b96000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 701.827182] ffff880080b96080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 701.827183] ==================================================================
The problem is that bio_check_pages_dirty calls bio_put, so we must
not access bio fields after bio_check_pages_dirty.
Fixes: 9b81c842355ac96097ba ("block: don't access bio->bi_error after bio_put()").
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
|
