summaryrefslogtreecommitdiffstats
path: root/fs/direct-io.c
AgeCommit message (Collapse)AuthorFilesLines
2019-01-22direct-io: allow direct writes to empty inodesErnesto A. Fernández1-2/+3
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently not allowed to create blocks for an empty inode. This confusion comes from trying to bit shift a negative number, so check the size of the inode first. The problem is most visible for hfsplus, because the fallback to buffered I/O doesn't happen and the write fails with EIO. This is in part the fault of the module, because it gives a wrong return value on ->get_block(); that will be fixed in a separate patch. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04Merge tag 'v4.20-rc5' into for-4.21/blockJens Axboe1-2/+2
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2018-11-30fs: fix lost error code in dio_completeMaximilian Heyne1-2/+2
commit e259221763a40403d5bb232209998e8c45804ab8 ("fs: simplify the generic_write_sync prototype") reworked callers of generic_write_sync(), and ended up dropping the error return for the directio path. Prior to that commit, in dio_complete(), an error would be bubbled up the stack, but after that commit, errors passed on to dio_complete were eaten up. This was reported on the list earlier, and a fix was proposed in https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but never followed up with. We recently hit this bug in our testing where fencing io errors, which were previously erroring out with EIO, were being returned as success operations after this commit. The fix proposed on the list earlier was a little short -- it would have still called generic_write_sync() in case `ret` already contained an error. This fix ensures generic_write_sync() is only called when there's no pending error in the write. Additionally, transferred is replaced with ret to bring this code in line with other callers. Fixes: e259221763a4 ("fs: simplify the generic_write_sync prototype") Reported-by: Ravi Nankani <rnankani@amazon.com> Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Torsten Mehlan <tomeh@amazon.de> CC: Uwe Dannowski <uwed@amazon.de> CC: Amit Shah <aams@amazon.de> CC: David Woodhouse <dwmw@amazon.co.uk> CC: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: make blk_poll() take a parameter on whether to spin or notJens Axboe1-1/+1
blk_poll() has always kept spinning until it found an IO. This is fine for SYNC polling, since we need to find one request we have pending, but in preparation for ASYNC polling it can be beneficial to just check if we have any entries available or not. Existing callers are converted to pass in 'spin == true', to retain the old behavior. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: add REQ_HIPRI and inherit it from IOCB_HIPRIJens Axboe1-0/+2
We use IOCB_HIPRI to poll for IO in the caller instead of scheduling. This information is not available for (or after) IO submission. The driver may make different queue choices based on the type of IO, so make the fact that we will poll for this IO known to the lower layers as well. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-24iov_iter: Use accessor functionDavid Howells1-1/+1
Use accessor functions to access an iterator's type and direction. This allows for the possibility of using some other method of determining the type of iterator than if-chains with bitwise-AND conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14block: consistently use GFP_NOIO instead of __GFP_NORECLAIMChristoph Hellwig1-2/+2
Same numerical value (for now at least), but a much better documentation of intent. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-5/+4
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - the v9fs maintainers have been missing for a long time. I've taken over v9fs patch slinging. - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits) mm,oom_reaper: check for MMF_OOM_SKIP before complaining mm/ksm: fix interaction with THP mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t headers: untangle kmemleak.h from mm.h include/linux/mmdebug.h: make VM_WARN* non-rvals mm/page_isolation.c: make start_isolate_page_range() fail if already isolated mm: change return type to vm_fault_t mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory kernel/fork.c: detect early free of a live mm mm: make counting of list_lru_one::nr_items lockless mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static block_invalidatepage(): only release page if the full page was invalidated mm: kernel-doc: add missing parameter descriptions mm/swap.c: remove @cold parameter description for release_pages() mm/nommu: remove description of alloc_vm_area zram: drop max_zpage_size and use zs_huge_class_size() zsmalloc: introduce zs_huge_class_size() mm: fix races between swapoff and flush dcache fs/direct-io.c: minor cleanups in do_blockdev_direct_IO ...
2018-04-05fs/direct-io.c: minor cleanups in do_blockdev_direct_IONikolay Borisov1-5/+4
We already get the block counts and calculate the end block at the beginning of the function. Let's use the local variables for consistency and readability. No functional changes [akpm@linux-foundation.org: constify the locals to prevent future slipups] Link: http://lkml.kernel.org/r/1519638870-17756-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-12direct-io: Remove unused DIO_SKIP_DIO_COUNT logicNikolay Borisov1-4/+2
This flag was added by fe0f07d08ee3 ("direct-io: only inc/deci inode->i_dio_count for file systems") as means to optimise the atomic modificaiton of the variable for blockdevices. However with the advent of 542ff7bf18c6 ("block: new direct I/O implementation") it became unused. So let's remove it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-12direct-io: Remove unused DIO_ASYNC_EXTEND flagNikolay Borisov1-2/+1
This flag was added by 6039257378e4 ("direct-io: add flag to allow aio writes beyond i_size") to support XFS. However, with the rework of XFS' DIO's path to use iomap in acdda3aae146 ("xfs: use iomap_dio_rw") it became redundant. So let's remove it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26direct-io: Fix sleep in atomic due to sync AIOJan Kara1-2/+1
Commit e864f39569f4 "fs: add RWF_DSYNC aand RWF_SYNC" added additional way for direct IO to become synchronous and thus trigger fsync from the IO completion handler. Then commit 9830f4be159b "fs: Use RWF_* flags for AIO operations" allowed these flags to be set for AIO as well. However that commit forgot to update the condition checking whether the IO completion handling should be defered to a workqueue and thus AIO DIO with RWF_[D]SYNC set will call fsync() from IRQ context resulting in sleep in atomic. Fix the problem by checking directly iocb flags (the same way as it is done in dio_complete()) instead of checking all conditions that could lead to IO being synchronous. CC: Christoph Hellwig <hch@lst.de> CC: Goldwyn Rodrigues <rgoldwyn@suse.com> CC: stable@vger.kernel.org Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9830f4be159b29399d107bffb99e0132bc5aedd4 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08iomap: report collisions between directio and buffered writes to userspaceDarrick J. Wong1-1/+23
If two programs simultaneously try to write to the same part of a file via direct IO and buffered IO, there's a chance that the post-diowrite pagecache invalidation will fail on the dirty page. When this happens, the dio write succeeded, which means that the page cache is no longer coherent with the disk! Programs are not supposed to mix IO types and this is a clear case of data corruption, so store an EIO which will be reflected to userspace during the next fsync. Replace the WARN_ON with a ratelimited pr_crit so that the developers have /some/ kind of breadcrumb to track down the offending program(s) and file(s) involved. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-03block: add a poll_fn callback to struct request_queueChristoph Hellwig1-1/+1
That we we can also poll non blk-mq queues. Mostly needed for the NVMe multipath code, but could also be useful elsewhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-1/+1
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-18Merge tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-8/+12
Pull xfs fixes from Darrick Wong: - fix some more CONFIG_XFS_RT related build problems - fix data loss when writeback at eof races eofblocks gc and loses - invalidate page cache after fs finishes a dio write - remove dirty page state when invalidating pages so releasepage does the right thing when handed a dirty page * tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: move two more RT specific functions into CONFIG_XFS_RT xfs: trim writepage mapping to within eof fs: invalidate page cache after end_io() in dio completion xfs: cancel dirty pages on invalidation
2017-10-18Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-6/+13
Pull block fixes from Jens Axboe: "Three small fixes: - A fix for skd, it was using kfree() to free a structure allocate with kmem_cache_alloc(). - Stable fix for nbd, fixing a regression using the normal ioctl based tools. - Fix for a previous fix in this series, that fixed up inconsistencies between buffered and direct IO" * 'for-linus' of git://git.kernel.dk/linux-block: fs: Avoid invalidation in interrupt context in dio_complete() nbd: don't set the device size until we're connected skd: Use kmem_cache_free
2017-10-17fs: Avoid invalidation in interrupt context in dio_complete()Lukas Czerner1-6/+13
Currently we try to defer completion of async DIO to the process context in case there are any mapped pages associated with the inode so that we can invalidate the pages when the IO completes. However the check is racy and the pages can be mapped afterwards. If this happens we might end up calling invalidate_inode_pages2_range() in dio_complete() in interrupt context which could sleep. This can be reproduced by generic/451. Fix this by passing the information whether we can or can't invalidate to the dio_complete(). Thanks Eryu Guan for reporting this and Jan Kara for suggesting a fix. Fixes: 332391a9935d ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO") Reported-by: Eryu Guan <eguan@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16fs: invalidate page cache after end_io() in dio completionEryu Guan1-8/+12
Commit 332391a9935d ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO") moved page cache invalidation from iomap_dio_rw() to iomap_dio_complete() for iomap based direct write path, but before the dio->end_io() call, and it re-introdued the bug fixed by commit c771c14baa33 ("iomap: invalidate page caches should be after iomap_dio_complete() in direct write"). I found this because fstests generic/418 started failing on XFS with v4.14-rc3 kernel, which is the regression test for this specific bug. So similarly, fix it by moving dio->end_io() (which does the unwritten extent conversion) before page cache invalidation, to make sure next buffer read reads the final real allocations not unwritten extents. I also add some comments about why should end_io() go first in case we get it wrong again in the future. Note that, there's no such problem in the non-iomap based direct write path, because we didn't remove the page cache invalidation after the ->direct_IO() in generic_file_direct_write() call, but I decided to fix dio_complete() too so we don't leave a landmine there, also be consistent with iomap_dio_complete(). Fixes: 332391a9935d ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO") Signed-off-by: Eryu Guan <eguan@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2017-10-10direct-io: Prevent NULL pointer access in submit_page_sectionAndreas Gruenbacher1-1/+2
In the code added to function submit_page_section by commit b1058b981, sdio->bio can currently be NULL when calling dio_bio_submit. This then leads to a NULL pointer access in dio_bio_submit, so check for a NULL bio in submit_page_section before trying to submit it instead. Fixes xfstest generic/250 on gfs2. Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-25fs: Fix page cache inconsistency when mixing buffered and AIO DIOLukas Czerner1-6/+43
Currently when mixing buffered reads and asynchronous direct writes it is possible to end up with the situation where we have stale data in the page cache while the new data is already written to disk. This is permanent until the affected pages are flushed away. Despite the fact that mixing buffered and direct IO is ill-advised it does pose a thread for a data integrity, is unexpected and should be fixed. Fix this by deferring completion of asynchronous direct writes to a process context in the case that there are mapped pages to be found in the inode. Later before the completion in dio_complete() invalidate the pages in question. This ensures that after the completion the pages in the written area are either unmapped, or populated with up-to-date data. Also do the same for the iomap case which uses iomap_dio_complete() instead. This has a side effect of deferring the completion to a process context for every AIO DIO that happens on inode that has pages mapped. However since the consensus is that this is ill-advised practice the performance implication should not be a problem. This was based on proposal from Jeff Moyer, thanks! Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-4/+4
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27fs: add O_DIRECT and aio support for sending down write life time hintsJens Axboe1-0/+2
Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20block: return on congested block deviceGoldwyn Rodrigues1-2/+8
A new bio operation flag REQ_NOWAIT is introduced to identify bio's orignating from iocb with IOCB_NOWAIT. This flag indicates to return immediately if a request cannot be made instead of retrying. Stacked devices such as md (the ones with make_request_fn hooks) currently are not supported because it may block for housekeeping. For example, an md can have a part of the device suspended. For this reason, only request based devices are supported. In the future, this feature will be expanded to stacked devices by teaching them how to handle the REQ_NOWAIT flags. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig1-4/+4
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09fs: simplify dio_bio_completeChristoph Hellwig1-4/+2
Only read bio->bi_error once in the common path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09fs: remove the unused error argument to dio_end_io()Christoph Hellwig1-2/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-27fs: add i_blocksize()Fabian Frederick1-1/+1
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs branch. This patch also fixes multiple checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Thanks to Andrew Morton for suggesting more appropriate function instead of macro. [geliangtang@gmail.com: truncate: use i_blocksize()] Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10do_direct_IO: Use inode->i_blkbits to compute block count to be cleanedChandan Rajendra1-1/+2
The code currently uses sdio->blkbits to compute the number of blocks to be cleaned. However sdio->blkbits is derived from the logical block size of the underlying block device (Refer to the definition of do_blockdev_direct_IO()). Due to this, generic/299 test would rarely fail when executed on an ext4 filesystem with 64k as the block size and when using a virtio based disk (having 512 byte as the logical block size) inside a kvm guest. This commit fixes the bug by using inode->i_blkbits to compute the number of blocks to be cleaned. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixed up by Jeff Moyer to only use/evaluate inode->i_blkbits once, to avoid issues with block size changes with IO in flight. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-14Merge tag 'xfs-for-linus-4.10-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs updates from Dave Chinner: "There is quite a varied bunch of stuff in this update, and some of it you will have already merged through the ext4 tree which imported the dax-4.10-iomap-pmd topic branch from the XFS tree. There is also a new direct IO implementation that uses the iomap infrastructure. It's much simpler, faster, and has lower IO latency than the existing direct IO infrastructure. Summary: - DAX PMD faults via iomap infrastructure - Direct-io support in iomap infrastructure - removal of now-redundant XFS inode iolock, replaced with VFS i_rwsem - synchronisation with fixes and changes in userspace libxfs code - extent tree lookup helpers - lots of little corruption detection improvements to verifiers - optimised CRC calculations - faster buffer cache lookups - deprecation of barrier/nobarrier mount options - we always use REQ_FUA/REQ_FLUSH where appropriate for data integrity now - cleanups to speculative preallocation - miscellaneous minor bug fixes and cleanups" * tag 'xfs-for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (63 commits) xfs: nuke unused tracepoint definitions xfs: use GPF_NOFS when allocating btree cursors xfs: use xfs_vn_setattr_size to check on new size xfs: deprecate barrier/nobarrier mount option xfs: Always flush caches when integrity is required xfs: ignore leaf attr ichdr.count in verifier during log replay xfs: use rhashtable to track buffer cache xfs: optimise CRC updates xfs: make xfs btree stats less huge xfs: don't cap maximum dedupe request length xfs: don't allow di_size with high bit set xfs: error out if trying to add attrs and anextents > 0 xfs: don't crash if reading a directory results in an unexpected hole xfs: complain if we don't get nextents bmap records xfs: check for bogus values in btree block headers xfs: forbid AG btrees with level == 0 xfs: several xattr functions can be void xfs: handle cow fork in xfs_bmap_trace_exlist xfs: pass state not whichfork to trace_xfs_extlist xfs: Move AGI buffer type setting to xfs_read_agi ...
2016-12-14Merge branch 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-blockLinus Torvalds1-21/+7
Pull fs meta data unmap optimization from Jens Axboe: "A series from Jan Kara, providing a more efficient way for unmapping meta data from in the buffer cache than doing it block-by-block. Provide a general helper that existing callers can use" * 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block: fs: Remove unmap_underlying_metadata fs: Add helper to clean bdev aliases under a bh and use it ext2: Use clean_bdev_aliases() instead of iteration ext4: Use clean_bdev_aliases() instead of iteration direct-io: Use clean_bdev_aliases() instead of handmade iteration fs: Provide function to unmap metadata for a range of blocks
2016-11-30fs: make sb_init_dio_done_wq available outside of direct-io.cChristoph Hellwig1-1/+1
We want to use the per-sb completion workqueue from the new iomap direct I/O code. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Jens Axboe <axboe@fb.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-11block: move poll code to blk-mqJens Axboe1-1/+1
The poll code is blk-mq specific, let's move it to blk-mq.c. This is a prep patch for improving the polling code. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-11-04direct-io: Use clean_bdev_aliases() instead of handmade iterationJan Kara1-21/+7
Use new provided function instead of an iteration through all allocated blocks. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01block,fs: use REQ_* flags directlyChristoph Hellwig1-1/+1
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-03consistent treatment of EFAULT on O_DIRECT read/writeAl Viro1-0/+3
Make local filesystems treat a fault as shortened IO, returning -EFAULT only if nothing had been transferred. That's how everything else (NFS, FUSE, ceph, Lustre) behaves. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-07direct-io: use bio set/get op accessorsMike Christie1-14/+20
This patch has the dio code use a REQ_OP for the op and rq_flag_bits for bi_rw flags. To set/get the op it uses the bio_set_op_attrs/bio_op accssors. It also begins to convert btrfs's dio_submit_t because of the dio submit_io callout use. The next patches will completely convert this code and the reset of the btrfs code paths. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie1-1/+2
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-27direct-io: fix direct write stale data exposure from concurrent buffered readEryu Guan1-7/+7
Currently direct writes inside i_size on a DIO_SKIP_HOLES filesystem are not allowed to allocate blocks(get_more_blocks() sets 'create' to 0 before calling get_block() callback), if it's a sparse file, direct writes fall back to buffered writes to avoid stale data exposure from concurrent buffered read. But there're two cases that can result in stale data exposure are not correctly detected. 1. The detection for "writing inside i_size" is not sufficient, writes can be treated as "extending writes" wrongly. For example, direct write 1FSB (file system block) to a 1FSB sparse file on ext2/3/4, starting from offset 0, in this case it's writing inside i_size, but 'create' is non-zero, because 'block_in_file' and '(i_size_read(inode) >> blkbits' are both zero. 2. Direct writes starting from or beyong i_size (not inside i_size) also could trigger block allocation and expose stale data. For example, consider a sparse file with i_size of 2k, and a write to offset 2k or 3k into the file, with a filesystem block size of 4k. (Thanks to Jeff Moyer for pointing this case out in his review.) The first problem can be demostrated by running ltp-aiodio test ADSP045 many times. When testing on extN filesystems, I see test failures occasionally, buffered read could read non-zero (stale) data. ADSP045: dio_sparse -a 4k -w 4k -s 2k -n 1 dio_sparse 0 TINFO : Dirtying free blocks dio_sparse 0 TINFO : Starting I/O tests non zero buffer at buf[0] => 0xffffffaa,ffffffaa,ffffffaa,ffffffaa non-zero read at offset 0 dio_sparse 0 TINFO : Killing childrens(s) dio_sparse 1 TFAIL : dio_sparse.c:191: 1 children(s) exited abnormally The second problem can also be reproduced easily by a hacked dio_sparse program, which accepts an option to specify the write offset. What we should really do is to disable block allocation for writes that could result in filling holes inside i_size. Link: http://lkml.kernel.org/r/1463156728-13357-1-git-send-email-guaneryu@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-01fs: simplify the generic_write_sync prototypeChristoph Hellwig1-8/+9
The kiocb already has the new position, so use that. The only interesting case is AIO, where we currently don't bother updating ki_pos. We're about to free the kiocb after we're done, so we might as well update it to make everyone's life simpler. While we're at it also return the bytes written argument passed in if we were successful so that the boilerplate error switch code in the callers can go away. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01fs: add IOCB_SYNC and IOCB_DSYNCChristoph Hellwig1-1/+1
This will allow us to do per-I/O sync file writes, as required by a lot of fileservers or storage targets. XXX: Will need a few additional audits for O_DSYNC Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01direct-io: remove the offset argument to dio_completeChristoph Hellwig1-5/+5
It has to be identical to ki_pos of the iocb, so use that instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01direct-io: eliminate the offset argument to ->direct_IOChristoph Hellwig1-3/+4
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually work, so eliminate the superflous argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-13/+13
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-21Merge tag 'xfs-for-linus-4.6-rc1' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs updates from Dave Chinner: "There's quite a lot in this request, and there's some cross-over with ext4, dax and quota code due to the nature of the changes being made. As for the rest of the XFS changes, there are lots of little things all over the place, which add up to a lot of changes in the end. The major changes are that we've reduced the size of the struct xfs_inode by ~100 bytes (gives an inode cache footprint reduction of >10%), the writepage code now only does a single set of mapping tree lockups so uses less CPU, delayed allocation reservations won't overrun under random write loads anymore, and we added compile time verification for on-disk structure sizes so we find out when a commit or platform/compiler change breaks the on disk structure as early as possible. Change summary: - error propagation for direct IO failures fixes for both XFS and ext4 - new quota interfaces and XFS implementation for iterating all the quota IDs in the filesystem - locking fixes for real-time device extent allocation - reduction of duplicate information in the xfs and vfs inode, saving roughly 100 bytes of memory per cached inode. - buffer flag cleanup - rework of the writepage code to use the generic write clustering mechanisms - several fixes for inode flag based DAX enablement - rework of remount option parsing - compile time verification of on-disk format structure sizes - delayed allocation reservation overrun fixes - lots of little error handling fixes - small memory leak fixes - enable xfsaild freezing again" * tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits) xfs: always set rvalp in xfs_dir2_node_trim_free xfs: ensure committed is initialized in xfs_trans_roll xfs: borrow indirect blocks from freed extent when available xfs: refactor delalloc indlen reservation split into helper xfs: update freeblocks counter after extent deletion xfs: debug mode forced buffered write failure xfs: remove impossible condition xfs: check sizes of XFS on-disk structures at compile time xfs: ioends require logically contiguous file offsets xfs: use named array initializers for log item dumping xfs: fix computation of inode btree maxlevels xfs: reinitialise per-AG structures if geometry changes during recovery xfs: remove xfs_trans_get_block_res xfs: fix up inode32/64 (re)mount handling xfs: fix format specifier , should be %llx and not %llu xfs: sanitize remount options xfs: convert mount option parsing to tokens xfs: fix two memory leaks in xfs_attr_list.c error paths xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared ...
2016-03-19Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: - Preparations of parallel lookups (the remaining main obstacle is the need to move security_d_instantiate(); once that becomes safe, the rest will be a matter of rather short series local to fs/*.c - preadv2/pwritev2 series from Christoph - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits) splice: handle zero nr_pages in splice_to_pipe() vfs: show_vfsstat: do not ignore errors from show_devname method dcache.c: new helper: __d_add() don't bother with __d_instantiate(dentry, NULL) untangle fsnotify_d_instantiate() a bit uninline d_add() replace d_add_unique() with saner primitive quota: use lookup_one_len_unlocked() cifs_get_root(): use lookup_one_len_unlocked() nfs_lookup: don't bother with d_instantiate(dentry, NULL) kill dentry_unhash() ceph_fill_trace(): don't bother with d_instantiate(dn, NULL) autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup() configfs: move d_rehash() into configfs_create() for regular files ceph: don't bother with d_rehash() in splice_dentry() namei: teach lookup_slow() to skip revalidate namei: massage lookup_slow() to be usable by lookup_one_len_unlocked() lookup_one_len_unlocked(): use lookup_dcache() namei: simplify invalidation logics in lookup_dcache() namei: change calling conventions for lookup_{fast,slow} and follow_managed() ...
2016-03-04direct-io: only use block polling if explicitly requestedChristoph Hellwig1-1/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stephen Bates <stephen.bates@pmcs.com> Tested-by: Stephen Bates <stephen.bates@pmcs.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-02-08direct-io: always call ->end_io if non-NULLChristoph Hellwig1-2/+7
This way we can pass back errors to the file system, and allow for cleanup required for all direct I/O invocations. Also allow the ->end_io handlers to return errors on their own, so that I/O completion errors can be passed on to the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-30block: fix use-after-free in dio_bio_completeMike Krinkin1-1/+1
kasan reported the following error when i ran xfstest: [ 701.826854] ================================================================== [ 701.826864] BUG: KASAN: use-after-free in dio_bio_complete+0x41a/0x600 at addr ffff880080b95f94 [ 701.826870] Read of size 4 by task loop2/3874 [ 701.826879] page:ffffea000202e540 count:0 mapcount:0 mapping: (null) index:0x0 [ 701.826890] flags: 0x100000000000000() [ 701.826895] page dumped because: kasan: bad access detected [ 701.826904] CPU: 3 PID: 3874 Comm: loop2 Tainted: G B W L 4.5.0-rc1-next-20160129 #83 [ 701.826910] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013 [ 701.826917] ffff88008fadf800 ffff88008fadf758 ffffffff81ca67bb 0000000041b58ab3 [ 701.826941] ffffffff830d1e74 ffffffff81ca6724 ffff88008fadf748 ffffffff8161c05c [ 701.826963] 0000000000000282 ffff88008fadf800 ffffed0010172bf2 ffffea000202e540 [ 701.826987] Call Trace: [ 701.826997] [<ffffffff81ca67bb>] dump_stack+0x97/0xdc [ 701.827005] [<ffffffff81ca6724>] ? _atomic_dec_and_lock+0xc4/0xc4 [ 701.827014] [<ffffffff8161c05c>] ? __dump_page+0x32c/0x490 [ 701.827023] [<ffffffff816b0d03>] kasan_report_error+0x5f3/0x8b0 [ 701.827033] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600 [ 701.827040] [<ffffffff816b1119>] __asan_report_load4_noabort+0x59/0x80 [ 701.827048] [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600 [ 701.827053] [<ffffffff817c302a>] dio_bio_complete+0x41a/0x600 [ 701.827057] [<ffffffff81bd19c8>] ? blk_queue_exit+0x108/0x270 [ 701.827060] [<ffffffff817c32b0>] dio_bio_end_aio+0xa0/0x4d0 [ 701.827063] [<ffffffff817c3210>] ? dio_bio_complete+0x600/0x600 [ 701.827067] [<ffffffff81bd2806>] ? blk_account_io_completion+0x316/0x5d0 [ 701.827070] [<ffffffff81bafe89>] bio_endio+0x79/0x200 [ 701.827074] [<ffffffff81bd2c9f>] blk_update_request+0x1df/0xc50 [ 701.827078] [<ffffffff81c02c27>] blk_mq_end_request+0x57/0x120 [ 701.827081] [<ffffffff81c03670>] __blk_mq_complete_request+0x310/0x590 [ 701.827084] [<ffffffff812348d8>] ? set_next_entity+0x2f8/0x2ed0 [ 701.827088] [<ffffffff8124b34d>] ? put_prev_entity+0x22d/0x2a70 [ 701.827091] [<ffffffff81c0394b>] blk_mq_complete_request+0x5b/0x80 [ 701.827094] [<ffffffff821e2a33>] loop_queue_work+0x273/0x19d0 [ 701.827098] [<ffffffff811f6578>] ? finish_task_switch+0x1c8/0x8e0 [ 701.827101] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0 [ 701.827104] [<ffffffff821e27c0>] ? lo_read_simple+0x890/0x890 [ 701.827108] [<ffffffff8129dd60>] ? debug_check_no_locks_freed+0x350/0x350 [ 701.827111] [<ffffffff811f63b0>] ? __hrtick_start+0x130/0x130 [ 701.827115] [<ffffffff82a0c8f6>] ? __schedule+0x936/0x20b0 [ 701.827118] [<ffffffff811dd6bd>] ? kthread_worker_fn+0x3ed/0x8d0 [ 701.827121] [<ffffffff811dd4ed>] ? kthread_worker_fn+0x21d/0x8d0 [ 701.827125] [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0 [ 701.827128] [<ffffffff811dd57f>] kthread_worker_fn+0x2af/0x8d0 [ 701.827132] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827135] [<ffffffff82a1ea46>] ? _raw_spin_unlock_irqrestore+0x36/0x60 [ 701.827138] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827141] [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170 [ 701.827144] [<ffffffff811dd00b>] kthread+0x24b/0x3a0 [ 701.827148] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827151] [<ffffffff8129d70d>] ? trace_hardirqs_on+0xd/0x10 [ 701.827155] [<ffffffff8116d41d>] ? do_group_exit+0xdd/0x350 [ 701.827158] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827161] [<ffffffff82a1f52f>] ret_from_fork+0x3f/0x70 [ 701.827165] [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0 [ 701.827167] Memory state around the buggy address: [ 701.827170] ffff880080b95e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827172] ffff880080b95f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827175] >ffff880080b95f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827177] ^ [ 701.827179] ffff880080b96000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827182] ffff880080b96080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 701.827183] ================================================================== The problem is that bio_check_pages_dirty calls bio_put, so we must not access bio fields after bio_check_pages_dirty. Fixes: 9b81c842355ac96097ba ("block: don't access bio->bi_error after bio_put()"). Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>