| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
|
|
cfids will soon keep a list of cached fids so we should not access this
directly from outside of cached_dir.c
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
and move the structure definitions into cached_dir.h
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
same file.
Solution is to send lease break ack immediately even in case of
deferred close handles to avoid lease break request timing out
and let deferred closed handle gets closed as scheduled.
Later patches could optimize cases where we then close some
of these handles sooner for the cases where lease break is to 'none'
Cc: stable@kernel.org
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Deferred close can be a very useful feature for allowing
caching data for read, and for minimizing the number of
reopens needed for a file that is repeatedly opened and
close but there are workloads where its default (1 second,
similar to actimeo/acregmax) is much too small.
Allow the user to configure the amount of time we can
defer sending the final smb3 close when we have a
handle lease on the file (rather than forcing it to depend
on value of actimeo which is often unrelated, and less safe).
Adds new mount parameter "closetimeo=" which is the maximum
number of seconds we can wait before sending an SMB3
close when we have a handle lease for it. Default value
also is set to slightly larger at 5 seconds (although some
other clients use larger default this should still help).
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
They are the same right now but tcon-> will later point to a different
type of struct containing a list of cfids.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Also rename crfid to cfid to have consistent naming for this variable.
This commit does not change any logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove {cifs,nfs}_fscache_release_page() from fs/cifs/fscache.h. This
functionality got built directly into cifs_release_folio() and will
hopefully be replaced with netfs_release_folio() at some point.
The "nfs_" version is a copy and paste error and should've been altered to
read "cifs_". That can also be removed.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The lock length was wrongly set to 0 when fl_end == OFFSET_MAX, thus
failing to lock the whole file when l_start=0 and l_len=0.
This fixes test 2 from cthon04.
Before patch:
$ ./cthon04/lock/tlocklfs -t 2 /mnt
Creating parent/child synchronization pipes.
Test #1 - Test regions of an unlocked file.
Parent: 1.1 - F_TEST [ 0, 1] PASSED.
Parent: 1.2 - F_TEST [ 0, ENDING] PASSED.
Parent: 1.3 - F_TEST [ 0,7fffffffffffffff] PASSED.
Parent: 1.4 - F_TEST [ 1, 1] PASSED.
Parent: 1.5 - F_TEST [ 1, ENDING] PASSED.
Parent: 1.6 - F_TEST [ 1,7fffffffffffffff] PASSED.
Parent: 1.7 - F_TEST [7fffffffffffffff, 1] PASSED.
Parent: 1.8 - F_TEST [7fffffffffffffff, ENDING] PASSED.
Parent: 1.9 - F_TEST [7fffffffffffffff,7fffffffffffffff] PASSED.
Test #2 - Try to lock the whole file.
Parent: 2.0 - F_TLOCK [ 0, ENDING] PASSED.
Child: 2.1 - F_TEST [ 0, 1] FAILED!
Child: **** Expected EACCES, returned success...
Child: **** Probably implementation error.
** CHILD pass 1 results: 0/0 pass, 0/0 warn, 1/1 fail (pass/total).
Parent: Child died
** PARENT pass 1 results: 10/10 pass, 0/0 warn, 0/0 fail (pass/total).
After patch:
$ ./cthon04/lock/tlocklfs -t 2 /mnt
Creating parent/child synchronization pipes.
Test #2 - Try to lock the whole file.
Parent: 2.0 - F_TLOCK [ 0, ENDING] PASSED.
Child: 2.1 - F_TEST [ 0, 1] PASSED.
Child: 2.2 - F_TEST [ 0, ENDING] PASSED.
Child: 2.3 - F_TEST [ 0,7fffffffffffffff] PASSED.
Child: 2.4 - F_TEST [ 1, 1] PASSED.
Child: 2.5 - F_TEST [ 1, ENDING] PASSED.
Child: 2.6 - F_TEST [ 1,7fffffffffffffff] PASSED.
Child: 2.7 - F_TEST [7fffffffffffffff, 1] PASSED.
Child: 2.8 - F_TEST [7fffffffffffffff, ENDING] PASSED.
Child: 2.9 - F_TEST [7fffffffffffffff,7fffffffffffffff] PASSED.
Parent: 2.10 - F_ULOCK [ 0, ENDING] PASSED.
** PARENT pass 1 results: 2/2 pass, 0/0 warn, 0/0 fail (pass/total).
** CHILD pass 1 results: 9/9 pass, 0/0 warn, 0/0 fail (pass/total).
Fixes: d80c69846ddf ("cifs: fix signed integer overflow when fl_end is OFFSET_MAX")
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
|
|
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
To 2.38
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is only used in transport.c.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Rename generic mid functions to same style, i.e. without "cifs_"
prefix.
cifs_{init,destroy}_mids() -> {init,destroy}_mids()
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
DeleteMidQEntry() was just a proxy for cifs_mid_q_entry_release().
- remove DeleteMidQEntry()
- rename cifs_mid_q_entry_release() to release_mid()
- rename kref_put() callback _cifs_mid_q_entry_release to __release_mid
- rename AllocMidQEntry() to alloc_mid()
- rename cifs_delete_mid() to delete_mid()
Update callers to use new names.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently much of the smb1 code is built even when
CONFIG_CIFS_ALLOW_INSECURE_LEGACY is disabled.
Move cifssmb.c to only be compiled when insecure legacy is disabled,
and move various SMB1/CIFS helper functions to that ifdef. Some
functions that were not SMB1/CIFS specific needed to be moved out of
cifssmb.c
This shrinks cifs.ko by more than 10% which is good - but also will
help with the eventual movement of the legacy code to a distinct
module. Follow on patches can shrink the number of ifdefs by
code restructuring where smb1 code is wedged in functions that
should be calling dialect specific helper functions instead,
and also by moving some functions from file.c/dir.c/inode.c into
smb1 specific c files.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
missing blank line after declaration
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It should unlock 'tcon->tc_lock' before return from cifs_tree_connect().
Fixes: fe67bd563ec2 ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
During analysis of multichannel perf, it was seen that
the global locks cifs_tcp_ses_lock and GlobalMid_Lock, which
were shared between various data structures were causing a
lot of contention points.
With this change, we're breaking down the use of these locks
by introducing new locks at more granular levels. i.e.
server->srv_lock, ses->ses_lock and tcon->tc_lock to protect
the unprotected fields of server, session and tcon structs;
and server->mid_lock to protect mid related lists and entries
at server level.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Removed remaining warnings related to externs. These warnings
although harmless could be distracting e.g.
fs/cifs/cifsfs.c: note: in included file:
fs/cifs/cifsglob.h:1968:24: warning: symbol 'sesInfoAllocCount' was not declared. Should it be static?
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace list_for_each() by list_for_each_entr() where appropriate.
Remove no longer used list_head stack variables.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the command is SMB2_IOCTL, OutputLength and OutputContext are
optional and can be zero, so return early and skip calculated length
check.
Move the mismatched length message to the end of the check, to avoid
unnecessary logs when the check was not a real miscalculation.
Also change the pr_warn_once() to a pr_warn() so we're sure to get a
log for the real mismatches.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we hit the 'index == next_cached' case, we leak a refcount on the
struct page. Fix this by using readahead_folio() which takes care of
the refcount for you.
Fixes: 0174ee9947bd ("cifs: Implement cache I/O by accessing the cache directly")
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The build warning:
warning: symbol 'cifs_tcp_ses_lock' was not declared. Should it be static?
can be distracting. Fix two of these.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove warnings for five global variables. For example:
fs/cifs/cifsglob.h:1984:24: warning: symbol 'midCount' was not declared. Should it be static?
Also change them from camelCase (e.g. "midCount" to "mid_count")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
One more.
remove unnecessary void* type castings.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
remove unnecessary void* type castings.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Variable mnt_sign_enabled is being initialized with a value that
is never read, it is being reassigned later on with a different
value. The initialization is redundant and can be removed.
Cleans up clang scan-build warning:
fs/cifs/cifssmb.c:465:7: warning: Value stored to 'mnt_sign_enabled
during its initialization is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB. Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.
Addresses-Coverity: 1467704 ("Speculative execution data leak")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Mount can now fail to older Samba servers due to a server
bug handling padding at the end of the last negotiate
context (negotiate contexts typically are rounded up to 8
bytes by adding padding if needed). This server bug can
be avoided by switching the order of negotiate contexts,
placing a negotiate context at the end that does not
require padding (prior to the recent netname context fix
this was the case on the client).
Fixes: 73130a7b1ac9 ("smb3: fix empty netname context on secondary channels")
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol+github@gmail.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cifs_put_smb_ses, when we're freeing the last ref count to
the session, we need to free up each channel. At this point,
it is unnecessary to take chan_lock, since we have the last
reference to the ses.
Picking up this lock also introduced a deadlock because it calls
cifs_put_tcp_ses, which locks cifs_tcp_ses_lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On failure to create a new channel, first cancel the
delayed threads, which could try to search for this
channel, and not find it.
The other option was to put the tcp session for the
channel first, before decrementing chan_count. But
that would leave a reference to the tcp session, when
it has been freed already.
So going with the former option and cancelling the
delayed works first, before rolling back the channel.
Fixes: aa45dadd34e4 ("cifs: change iface_list from array to sorted linked list")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_ses::ip_addr wasn't being updated in cifs_session_setup() when
reconnecting SMB sessions thus returning wrong value in
/proc/fs/cifs/DebugData.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We use cifs_tcp_ses_lock to protect a lot of things.
Not only does it protect the lists of connections, sessions,
tree connects, open file lists, etc., we also use it to
protect some fields in each of it's entries.
In this case, cifs_mark_ses_for_reconnect takes the
cifs_tcp_ses_lock to traverse the lists, and then calls
cifs_update_iface. However, that can end up calling
cifs_put_tcp_session, which picks up the same lock again.
Avoid this by taking a ref for the session, drop the lock,
and then call update iface.
Also, in cifs_update_iface, avoid nested locking of iface_lock
and chan_lock, as much as possible. When unavoidable, we need
to pick iface_lock first.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, we only query the server for network interfaces
information at the time of mount, and never afterwards.
This can be a problem, especially for services like Azure,
where the IP address of the channel endpoints can change
over time.
With this change, we schedule a 600s polling of this info
from the server for each tree connect.
An alternative for periodic polling was to do this only at
the time of reconnect. But this could delay the reconnect
time slightly. Also, there are some challenges w.r.t how
we have cifs_reconnect implemented today.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Going forward, the plan is to periodically query the server
for it's interfaces (when multichannel is enabled).
This change allows checking for inactive interfaces during
reconnect, and reconnect to a new interface if necessary.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A server's published interface list can change over time, and needs
to be updated. We've storing iface_list as a simple array, which
makes it difficult to manipulate an existing list.
With this change, iface_list is modified into a linked list of
interfaces, which is kept sorted by speed.
Also added a reference counter for an iface entry, so that each
channel can maintain a backpointer to the iface and drop it
easily when needed.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB). The previous patch fixed that by avoiding
incorrectly sending the netname context when there would be a null
hostname sent in the netname context, while this patch fixes the null
hostname for the secondary channel by using the hostname of the
primary channel for the secondary channel.
Fixes: 4c14d7043fede ("cifs: populate empty hostnames for extra channels")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB).
Fixes: 4c14d7043fede ("cifs: populate empty hostnames for extra channels")
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In order to debug problems with file size being reported incorrectly
temporarily (in this case xfstest generic/584 intermittent failure)
we need to add trace point for the non-compounded code path where
we set the file size (SMB2_set_eof). The new trace point is:
"smb3_set_eof"
Here is sample output from the tracepoint:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
xfs_io-75403 [002] ..... 95219.189835: smb3_set_eof: xid=221 sid=0xeef1cbd2 tid=0x27079ee6 fid=0x52edb58c offset=0x100000
aio-dio-append--75418 [010] ..... 95219.242402: smb3_set_eof: xid=226 sid=0xeef1cbd2 tid=0x27079ee6 fid=0xae89852d offset=0x0
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull cifs client fixes from Steve French:
"Three reconnect fixes, all for stable as well.
One of these three reconnect fixes does address a problem with
multichannel reconnect, but this does not include the additional
fix (still being tested) for dynamically detecting multichannel
adapter changes which will improve those reconnect scenarios even
more"
* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: populate empty hostnames for extra channels
cifs: return errors during session setup during reconnects
cifs: fix reconnect on smb3 mount types
|
|
Currently, the secondary channels of a multichannel session
also get hostname populated based on the info in primary channel.
However, this will end up with a wrong resolution of hostname to
IP address during reconnect.
This change fixes this by not populating hostname info for all
secondary channels.
Fixes: 5112d80c162f ("cifs: populate server_hostname for extra channels")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up. For
type safety, it's better not to do that (and it's less typing too).
Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer. Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.
netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.
Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/
|
|
While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:
In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.
Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).
Most of the changes were done with:
perl -p -i -e 's/vfs_inode/netfs.inode/'g \
`git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]`
Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.
Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].
Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.
[ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]
Fixes: bc899ee1c898 ("netfs: Add a netfs inode context")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Jonathan Corbet <corbet@lwn.net>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: William Kucharski <william.kucharski@oracle.com>
cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
cc: Dave Chinner <david@fromorbit.com>
cc: linux-doc@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3]
Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4]
Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During reconnects, we check the return value from
cifs_negotiate_protocol, and have handlers for both success
and failures. But if that passes, and cifs_setup_session
returns any errors other than -EACCES, we do not handle
that. This fix adds a handler for that, so that we don't
go ahead and try a tree_connect on a failed session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs.ko defines two file system types: cifs & smb3, and
__cifs_get_super() was not including smb3 file system type when
looking up superblocks, therefore failing to reconnect tcons in
cifs_tree_connect().
Fix this by calling iterate_supers_type() on both file system types.
Link: https://lore.kernel.org/r/CAFrh3J9soC36+BVuwHB=g9z_KB5Og2+p2_W+BBoBOZveErz14w@mail.gmail.com
Cc: stable@vger.kernel.org
Tested-by: Satadru Pramanik <satadru@gmail.com>
Reported-by: Satadru Pramanik <satadru@gmail.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Set default value of ppath to null.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
During DFS failover, prefix paths may change, so make sure to not
leave trailing separators when parsing thew in
dfs_cache_get_tgt_share(). The separators of prefix paths are already
handled by build_path_from_dentry_optional_prefix().
Consider the following DFS link:
//dom/dfs/link: [\srv1\share\dir1, \srv2\share\dir1]
Before commit:
mount.cifs //dom/dfs/link
tree connect to \\srv1\share; prefix_path=dir1
disconnect srv1; failover to srv2
tree connect to \\srv2\share; prefix_path=dir1\
mv foo bar
...
SMB2 430 Create Request File: dir1\\foo;GetInfo Request FILE_INFO/SMB2_FILE_ALL_INFO;Close Request
SMB2 582 Create Response File: dir1\\foo;GetInfo Response;Close Response
SMB2 430 Create Request File: dir1\\bar;GetInfo Request FILE_INFO/SMB2_FILE_ALL_INFO;Close Request
SMB2 286 Create Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;GetInfo Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;Close Response, Error: STATUS_OBJECT_NAME_NOT_FOUND
SMB2 462 Create Request File: dir1\\foo;SetInfo Request FILE_INFO/SMB2_FILE_RENAME_INFO NewName:dir1\\bar;Close Request
SMB2 478 Create Response File: dir1\\foo;SetInfo Response, Error: STATUS_OBJECT_NAME_INVALID;Close Response
After commit:
mount.cifs //dom/dfs/link
tree connect to \\srv1\share; prefix_path=dir1
disconnect srv1; failover to srv2
tree connect to \\srv2\share; prefix_path=dir1
mv foo bar
...
SMB2 430 Create Request File: dir1\foo;GetInfo Request FILE_INFO/SMB2_FILE_ALL_INFO;Close Request
SMB2 582 Create Response File: dir1\foo;GetInfo Response;Close Response
SMB2 430 Create Request File: dir1\bar;GetInfo Request FILE_INFO/SMB2_FILE_ALL_INFO;Close Request
SMB2 286 Create Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;GetInfo Response, Error: STATUS_OBJECT_NAME_NOT_FOUND;Close Response, Error: STATUS_OBJECT_NAME_NOT_FOUND
SMB2 462 Create Request File: dir1\foo;SetInfo Request FILE_INFO/SMB2_FILE_RENAME_INFO NewName:dir1\bar;Close Request
SMB2 478 Create Response File: dir1\foo;SetInfo Response;Close Response
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
