summaryrefslogtreecommitdiffstats
path: root/fs/cifs
AgeCommit message (Collapse)AuthorFilesLines
2018-12-07CIFS: Avoid returning EBUSY to upper layer VFSLong Li1-25/+6
EBUSY is not handled by VFS, and will be passed to user-mode. This is not correct as we need to wait for more credits. This patch also fixes a bug where rsize or wsize is used uninitialized when the call to server->ops->wait_mtu_credits() fails. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-12-06cifs: Fix separator when building path from dentryPaulo Alcantara1-1/+1
Make sure to use the CIFS_DIR_SEP(cifs_sb) as path separator for prefixpath too. Fixes a bug with smb1 UNIX extensions. Fixes: a6b5058fafdf ("fs/cifs: make share unaccessible at root level mountable") Signed-off-by: Paulo Alcantara <palcantara@suse.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2018-12-06cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)Steve French1-1/+1
Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-11-02cifs: fix signed/unsigned mismatch on aio_read patchSteve French1-6/+11
The patch "CIFS: Add support for direct I/O read" had a signed/unsigned mismatch (ssize_t vs. size_t) in the return from one function. Similar trivial change in aio_write Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr>
2018-11-02cifs: don't dereference smb_file_target before null checkColin Ian King1-2/+5
There is a null check on dst_file->private data which suggests it can be potentially null. However, before this check, pointer smb_file_target is derived from dst_file->private and dereferenced in the call to tlink_tcon, hence there is a potential null pointer deference. Fix this by assigning smb_file_target and target_tcon after the null pointer sanity checks. Detected by CoverityScan, CID#1475302 ("Dereference before null check") Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02CIFS: Add direct I/O functions to file_operationsLong Li1-6/+4
With direct read/write functions implemented, add them to file_operations. Dircet I/O is used under two conditions: 1. When mounting with "cache=none", CIFS uses direct I/O for all user file data transfer. 2. When opening a file with O_DIRECT, CIFS uses direct I/O for all data transfer on this file. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-11-02CIFS: Add support for direct I/O writeLong Li2-41/+164
With direct I/O write, user supplied buffers are pinned to the memory and data are transferred directly from user buffers to the transport layer. Change in v3: add support for kernel AIO Change in v4: Refactor common write code to __cifs_writev for direct and non-direct I/O. Retry on direct I/O failure. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02CIFS: Add support for direct I/O readLong Li3-39/+192
With direct I/O read, we transfer the data directly from transport layer to the user data buffer. Change in v3: add support for kernel AIO Change in v4: Refactor common read code to __cifs_readv for direct and non-direct I/O. Retry on direct I/O failure. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02smb3: missing defines and structs for reparse point handlingSteve French2-0/+38
We were missing some structs from MS-FSCC relating to reparse point handling. Add them to protocol defines in smb2pdu.h Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-11-02smb3: allow more detailed protocol info on open files for debuggingSteve French4-0/+65
In order to debug complex problems it is often helpful to have detailed information on the client and server view of the open file information. Add the ability for root to view the list of smb3 open files and dump the persistent handle and other info so that it can be more easily correlated with server logs. Sample output from "cat /proc/fs/cifs/open_files" # Version:1 # Format: # <tree id> <persistent fid> <flags> <count> <pid> <uid> <filename> <mid> 0x5 0x800000378 0x8000 1 7704 0 some-file 0x14 0xcb903c0c 0x84412e67 0x8000 1 7754 1001 rofile 0x1a6d 0xcb903c0c 0x9526b767 0x8000 1 7720 1000 file 0x1a5b 0xcb903c0c 0x9ce41a21 0x8000 1 7715 0 smallfile 0xd67 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-11-02smb3: on kerberos mount if server doesn't specify auth type use krb5Steve French1-2/+4
Some servers (e.g. Azure) do not include a spnego blob in the SMB3 negotiate protocol response, so on kerberos mounts ("sec=krb5") we can fail, as we expected the server to list its supported auth types (OIDs in the spnego blob in the negprot response). Change this so that on krb5 mounts we default to trying krb5 if the server doesn't list its supported protocol mechanisms. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org>
2018-11-02smb3: add trace point for tree connectionSteve French2-1/+44
In debugging certain scenarios, especially reconnect cases, it can be helpful to have a dynamic trace point for the result of tree connect. See sample output below from a reconnect event. The new event is 'smb3_tcon' TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | cifsd-6071 [001] .... 2659.897923: smb3_reconnect: server=localhost current_mid=0xa kworker/1:1-71 [001] .... 2666.026342: smb3_cmd_done: sid=0x0 tid=0x0 cmd=0 mid=0 kworker/1:1-71 [001] .... 2666.026576: smb3_cmd_err: sid=0xc49e1787 tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5 kworker/1:1-71 [001] .... 2666.031677: smb3_cmd_done: sid=0xc49e1787 tid=0x0 cmd=1 mid=2 kworker/1:1-71 [001] .... 2666.031921: smb3_cmd_done: sid=0xc49e1787 tid=0x6e78f05f cmd=3 mid=3 kworker/1:1-71 [001] .... 2666.031923: smb3_tcon: xid=0 sid=0xc49e1787 tid=0x0 unc_name=\\localhost\test rc=0 kworker/1:1-71 [001] .... 2666.032097: smb3_cmd_done: sid=0xc49e1787 tid=0x6e78f05f cmd=11 mid=4 kworker/1:1-71 [001] .... 2666.032265: smb3_cmd_done: sid=0xc49e1787 tid=0x7912332f cmd=3 mid=5 kworker/1:1-71 [001] .... 2666.032266: smb3_tcon: xid=0 sid=0xc49e1787 tid=0x0 unc_name=\\localhost\IPC$ rc=0 kworker/1:1-71 [001] .... 2666.032386: smb3_cmd_done: sid=0xc49e1787 tid=0x7912332f cmd=11 mid=6 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-11-02cifs: fix spelling mistake, EACCESS -> EACCESColin Ian King2-3/+3
Trivial fix to a spelling mistake of the error access name EACCESS, rename to EACCES Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-11-02cifs: fix return value for cifs_listxattrRonnie Sahlberg1-5/+6
If the application buffer was too small to fit all the names we would still count the number of bytes and return this for listxattr. This would then trigger a BUG in usercopy.c Fix the computation of the size so that we return -ERANGE correctly when the buffer is too small. This fixes the kernel BUG for xfstest generic/377 Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-11-02Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-10/+14
Pull vfs dedup fixes from Dave Chinner: "This reworks the vfs data cloning infrastructure. We discovered many issues with these interfaces late in the 4.19 cycle - the worst of them (data corruption, setuid stripping) were fixed for XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all the problems was needed. That rework is the contents of this pull request. Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use a common .remap_file_range method and supply generic bounds and sanity checking functions that are shared with the data write path. The current VFS infrastructure has problems with rlimit, LFS file sizes, file time stamps, maximum filesystem file sizes, stripping setuid bits, etc and so they are addressed in these commits. We also introduce the ability for the ->remap_file_range methods to return short clones so that clones for vfs_copy_file_range() don't get rejected if the entire range can't be cloned. It also allows filesystems to sliently skip deduplication of partial EOF blocks if they are not capable of doing so without requiring errors to be thrown to userspace. Existing filesystems are converted to user the new remap_file_range method, and both XFS and ocfs2 are modified to make use of the new generic checking infrastructure" * tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits) xfs: remove [cm]time update from reflink calls xfs: remove xfs_reflink_remap_range xfs: remove redundant remap partial EOF block checks xfs: support returning partial reflink results xfs: clean up xfs_reflink_remap_blocks call site xfs: fix pagecache truncation prior to reflink ocfs2: remove ocfs2_reflink_remap_range ocfs2: support partial clone range and dedupe range ocfs2: fix pagecache truncation prior to reflink ocfs2: truncate page cache for clone destination file before remapping vfs: clean up generic_remap_file_range_prep return value vfs: hide file range comparison function vfs: enable remap callers that can handle short operations vfs: plumb remap flags through the vfs dedupe functions vfs: plumb remap flags through the vfs clone functions vfs: make remap_file_range functions take and return bytes completed vfs: remap helper should update destination inode metadata vfs: pass remap flags to generic_remap_checks vfs: pass remap flags to generic_remap_file_range_prep vfs: combine the clone and dedupe into a single remap_file_range ...
2018-11-01Merge branch 'work.afs' of ↵Linus Torvalds6-17/+24
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-30vfs: make remap_file_range functions take and return bytes completedDarrick J. Wong1-3/+3
Change the remap_file_range functions to take a number of bytes to operate upon and return the number of bytes they operated on. This is a requirement for allowing fs implementations to return short clone/dedupe results to the user, which will enable us to obey resource limits in a graceful manner. A subsequent patch will enable copy_file_range to signal to the ->clone_file_range implementation that it can handle a short length, which will be returned in the function's return value. For now the short return is not implemented anywhere so the behavior won't change -- either copy_file_range manages to clone the entire range or it tries an alternative. Neither clone ioctl can take advantage of this, alas. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: combine the clone and dedupe into a single remap_file_rangeDarrick J. Wong1-9/+13
Combine the clone_file_range and dedupe_file_range operations into a single remap_file_range file operation dispatch since they're fundamentally the same operation. The differences between the two can be made in the prep functions. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-24cifs: update internal module version number for cifs.ko to 2.14Steve French1-1/+1
Update version reported in "modinfo cifs" Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-24smb3: add debug for unexpected mid cancellationSteve French1-2/+2
We have hit this intermittently, increase the verbosity of warning message on unexpected mid cancellation. Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-24cifs: allow calling SMB2_xxx_free(NULL)Ronnie Sahlberg1-7/+12
Change these free functions to allow passing NULL as the argument and treat it as a no-op just like free(NULL) would. Or, if rqst->rq_iov is NULL. The second scenario could happen for smb2_queryfs() if the call to SMB2_query_info_init() fails and we go to qfs_exit to clean up and free all resources. In that case we have not yet assigned rqst[2].rq_iov and thus the rq_iov dereference in SMB2_close_free() will cause a NULL pointer dereference. Fixes: 1eb9fb52040f ("cifs: create SMB2_open_init()/SMB2_open_free() helpers") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org>
2018-10-23smb3 - clean up debug output displaying network interfacesSteve French1-2/+2
Make the output of /proc/fs/cifs/DebugData a little easier to read by cleaning up the listing of network interfaces removing a wasted line break. Here is a comparison of the network interface information that from be viewed at the end of output from "cat /proc/fs/cifs/DebugData" Before: Server interfaces: 8 0) Speed: 10000000000 bps Capabilities: rss IPv6: fe80:0000:0000:0000:2cf5:407e:84b0:21dd 1) Speed: 1000000000 bps Capabilities: IPv6: fe80:0000:0000:0000:61cd:6147:3d0c:f484 vs. after: Server interfaces: 11 0) Speed: 10000000000 bps Capabilities: rss IPv6: fe80:0000:0000:0000:2cf5:407e:84b0:21dd 1) Speed: 2000000000 bps Capabilities: IPv6: fe80:0000:0000:0000:3d76:2d05:dcf8:ed10 Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23smb3: show number of current open files in /proc/fs/cifs/StatsSteve French5-1/+13
To allow better debugging (for example applications with handle leaks, or complex reconnect scenarios) display the number of open files (on the client) and number of open server file handles for each tcon in /proc/fs/cifs/Stats. Note that open files on server is one larger than local due to handle caching (in this case of the root of the share). In this example there are two local open files, and three (two file and one directory handle) open on the server. Sample output: $ cat /proc/fs/cifs/Stats Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 36 maximum at one time: 2 1) \\localhost\test SMBs: 69 Bytes read: 27 Bytes written: 0 Open files: 2 total (local), 3 open on server TreeConnects: 1 total 0 failed TreeDisconnects: 0 total 0 failed Creates: 19 total 0 failed Closes: 16 total 0 failed ... Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23cifs: add support for ioctl on directoriesRonnie Sahlberg3-30/+102
We do not call cifs_open_file() for directories and thus we do not have a pSMBFile we can extract the FIDs from. Solve this by instead always using a compounded open/query/close for the passthrough ioctl. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23cifs: fallback to older infolevels on findfirst queryinfo retrySteve French1-30/+37
In cases where queryinfo fails, we have cases in cifs (vers=1.0) where with backupuid mounts we retry the query info with findfirst. This doesn't work to some NetApp servers which don't support WindowsXP (and later) infolevel 261 (SMB_FIND_FILE_ID_FULL_DIR_INFO) so in this case use other info levels (in this case it will usually be level 257, SMB_FIND_FILE_DIRECTORY_INFO). (Also fixes some indentation) See kernel bugzilla 201435 Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23smb3: do not attempt cifs operation in smb3 query info error pathSteve French1-1/+9
If backupuid mount option is sent, we can incorrectly retry (on access denied on query info) with a cifs (FindFirst) operation on an smb3 mount which causes the server to force the session close. We set backup intent on open so no need for this fallback. See kernel bugzilla 201435 Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23smb3: send backup intent on compounded query infoSteve French1-2/+7
When mounting with backupuid set, we should be setting CREATE_OPEN_BACKUP_INTENT flag on compounded opens as well, especially the case of compounded smb2_query_path_info. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23cifs: track writepages in vfs operation countersSteve French1-1/+10
writepages and readpages operations did not call get/free_xid so the statistics for file copy could get confusing with "vfs operations" not increasing. Add get_xid and free_xid to cifs readpages and writepages functions. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23smb2: fix uninitialized variable bug in smb2_ioctl_query_infoGustavo A. R. Silva1-1/+1
There is a potential execution path in which variable *resp_buftype* is passed as an argument to function free_rsp_buf(), in which it is used in a comparison without being properly initialized previously. Fix this by initializing variable *resp_buftype* to CIFS_NO_BUFFER in order to avoid unpredictable or unintended results. Addresses-Coverity-ID: 1473971 ("Uninitialized scalar variable") Fixes: c5d25bdb2967 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23cifs: add IOCTL for QUERY_INFO passthrough to userspaceRonnie Sahlberg7-11/+134
This allows userspace tools to query the raw info levels for cifs files and process the response in userspace. In particular this is useful for many of those data where there is no corresponding native data structure in linux. For example querying the security descriptor for a file and extract the SIDs. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23cifs: minor clarification in commentsSteve French2-2/+16
Clarify meaning (in comments) meaning of various options for debug messages in cifs.ko. Also fixed trivial formatting/style issue with previous patch. Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23CIFS: Print message when attempting a mountRodrigo Freire2-2/+7
Currently, no messages are printed when mounting a CIFS filesystem and no debug configuration is enabled. However, a CIFS mount information is valuable when troubleshooting and/or forensic analyzing a system and finding out if was a CIFS endpoint mount attempted. Other filesystems such as XFS, EXT* does issue a printk() when mounting their filesystems. A terse log message is printed only if cifsFYI is not enabled. Otherwise, the default full debug message is printed. In order to not clutter and classify correctly the event messages, these are logged as KERN_INFO level. Sample mount operations: [root@corinthians ~]# mount -o user=administrator //172.25.250.18/c$ /mnt (non-existent system) [root@corinthians ~]# mount -o user=administrator //172.25.250.19/c$ /mnt (Valid system) Kernel message log for the mount operations: [ 450.464543] CIFS: Attempting to mount //172.25.250.18/c$ [ 456.478186] CIFS VFS: Error connecting to socket. Aborting operation. [ 456.478381] CIFS VFS: cifs_mount failed w/return code = -113 [ 467.688866] CIFS: Attempting to mount //172.25.250.19/c$ Signed-off-by: Rodrigo Freire <rfreire@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23CIFS: Adds information-level logging functionRodrigo Freire1-0/+16
Currently, CIFS lacks a internal logging function that prints out data when CIFS_DEBUG=n. When CIFS_DEBUG=y, the only message level for CIFS events are KERN_ERR or KERN_DEBUG. This patch creates cifs_info(), which is useful for printing non-critical event messges, at either CIFS_DEBUG state. Signed-off-by: Rodrigo Freire <rfreire@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23cifs: OFD locks do not conflict with eachothersRonnie Sahlberg3-15/+25
RHBZ 1484130 Update cifs_find_fid_lock_conflict() to recognize that ODF locks do not conflict with eachother. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23CIFS: SMBD: Do not call ib_dereg_mr on invalidated memory registrationLong Li1-19/+19
It is not necessary to deregister a memory registration after it has been successfully invalidated. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23CIFS: pass page offsets on SMB1 read/writeLong Li1-0/+2
When issuing SMB1 read/write, pass the page offset to transport. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-23fs/cifs: fix uninitialised variable warningsGarry McNulty1-3/+3
In some error conditions, resp_buftype can be passed uninitialised to free_rsp_buf(), potentially resulting in a spurious debug message. If resp_buftype randomly had the value 1 (CIFS_SMALL_BUFFER) then this would log a debug message. The rsp pointer is initialised to NULL so there is no other side-effect. Detected by CoverityScan, CID 1438585 ("Uninitialized scalar variable") Detected by CoverityScan, CID 1438667 ("Uninitialized scalar variable") Detected by CoverityScan, CID 1438764 ("Uninitialized scalar variable") Signed-off-by: Garry McNulty <garrmcnu@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-10-23smb3: add tracepoint for sending lease break responses to serverSteve French2-1/+88
Be able to log a ftrace message on success and/or failure of sending a lease break response to the server. Example output: TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | kworker/1:1-5681 [001] .... 11123.530457: smb3_lease_done: sid=0x291e3e0f tid=0x8ba43071 lease_key=0x1852ca0d3ecd9b55847750a86716fde lease_state=0x0 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-10-23cifs: do not return atime less than mtimeSteve French3-3/+12
In network file system it is fairly easy for server and client atime vs. mtime to get confused (and atime updated less frequently) which we noticed broke some apps which expect atime >= mtime Also ignore relatime mount option (rather than error on it) since relatime is basically what some network server fs are doing (relatime). Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23smb3: update default requested iosize to 4MB from 1MB for recent dialectsSteve French2-4/+55
Modern servers often support 8MB as maximum i/o size, and we see some performance benefits (my testing showed 1 to 13% on write paths, and 1 to 3% on read paths for increasing the default to 4MB). If server doesn't support larger i/o size, during negotiate protocol it is already set correctly to the server's maximum if lower than 4MB. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23smb3: Add debug message later in smb2/smb3 reconnect pathSteve French2-1/+4
As we reset credits later in the reconnect path, useful to have optional (cifsFYI) debug message. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-10-23CIFS: make 'nodfs' mount opt a superblock flagAurelien Aptel4-5/+14
tcon->Flags is only used by SMB1 code and changing it is not permanent (you lose the setting on tcon reconnect). * Move the setting to superblock flags (per mount-points). * Make automount callback exit early when flag present * Make dfs resolving happening in mount syscall exit early if flag present Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-10-23smb3: track the instance of each session for debuggingSteve French4-4/+10
Each time we reconnect to the same server, bump an instance counter (and display in /proc/fs/cifs/DebugData) to make it easier to debug. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-10-23smb3: minor missing defines relating to reparse pointsSteve French1-1/+3
Previously reserved dpen response field changed in smb3 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-10-23smb3: add way to control slow response threshold for logging and statsSteve French3-3/+26
/proc/fs/cifs/Stats when CONFIG_CIFS_STATS2 is enabled logs 'slow' responses, but depending on the server you are debugging a one second timeout may be too fast, so allow setting it to a larger number of seconds via new module parameter /sys/module/cifs/parameters/slow_rsp_threshold or via modprobe: slow_rsp_threshold:Amount of time (in seconds) to wait before logging that a response is delayed. Default: 1 (if set to 0 disables msg). (uint) Recommended values are 0 (disabled) to 32767 (9 hours) with the default remaining as 1 second. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-10-23cifs: minor updates to module description for cifs.koSteve French1-3/+3
note smb3 (and common more modern servers) in the module description Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23cifs: protect against server returning invalid file system block sizeSteve French1-0/+21
For a network file system we generally prefer large i/o, but if the server returns invalid file system block/sector sizes in cifs (vers=1.0) QFSInfo then set block size to a default of a reasonable minimum (4K). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-10-23smb3: allow stats which track session and share reconnects to be resetSteve French1-0/+3
Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats except the session and share reconnect counts. Fix it to reset those as well. CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-10-23SMB3: Backup intent flag missing from compounded opsSteve French1-0/+2
When "backup intent" is requested on the mount (e.g. backupuid or backupgid mount options), the corresponding flag was missing from some of the new compounding operations as well (now that open_query_close is gone). Related to kernel bugzilla #200953 Reported-and-tested-by: <whh@rubrik.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-10-23cifs: create a define for the max number of iov we need for a SMB2 set_infoRonnie Sahlberg2-1/+10
So we don't overflow the io vector arrays accidentally Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 08:07:07 +0000