summaryrefslogtreecommitdiffstats
path: root/fs/cifs
AgeCommit message (Collapse)AuthorFilesLines
2012-07-16cifs: always update the inode cache with the results from a FIND_*Jeff Layton1-2/+5
When we get back a FIND_FIRST/NEXT result, we have some info about the dentry that we use to instantiate a new inode. We were ignoring and discarding that info when we had an existing dentry in the cache. Fix this by updating the inode in place when we find an existing dentry and the uniqueid is the same. Cc: <stable@vger.kernel.org> # .31.x Reported-and-Tested-by: Andrew Bartlett <abartlet@samba.org> Reported-by: Bill Robertson <bill_robertson@debortoli.com.au> Reported-by: Dion Edwards <dion_edwards@debortoli.com.au> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-16cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmapsJeff Layton1-1/+29
Jian found that when he ran fsx on a 32 bit arch with a large wsize the process and one of the bdi writeback kthreads would sometimes deadlock with a stack trace like this: crash> bt PID: 2789 TASK: f02edaa0 CPU: 3 COMMAND: "fsx" #0 [eed63cbc] schedule at c083c5b3 #1 [eed63d80] kmap_high at c0500ec8 #2 [eed63db0] cifs_async_writev at f7fabcd7 [cifs] #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs] #4 [eed63e50] do_writepages at c04f3e32 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a #6 [eed63ea4] filemap_fdatawrite at c04e1b3e #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs] #8 [eed63ecc] do_sync_write at c052d202 #9 [eed63f74] vfs_write at c052d4ee #10 [eed63f94] sys_write at c052df4c #11 [eed63fb0] ia32_sysenter_target at c0409a98 EAX: 00000004 EBX: 00000003 ECX: abd73b73 EDX: 012a65c6 DS: 007b ESI: 012a65c6 ES: 007b EDI: 00000000 SS: 007b ESP: bf8db178 EBP: bf8db1f8 GS: 0033 CS: 0073 EIP: 40000424 ERR: 00000004 EFLAGS: 00000246 Each task would kmap part of its address array before getting stuck, but not enough to actually issue the write. This patch fixes this by serializing the marshal_iov operations for async reads and writes. The idea here is to ensure that cifs aggressively tries to populate a request before attempting to fulfill another one. As soon as all of the pages are kmapped for a request, then we can unlock and allow another one to proceed. There's no need to do this serialization on non-CONFIG_HIGHMEM arches however, so optimize all of this out when CONFIG_HIGHMEM isn't set. Cc: <stable@vger.kernel.org> Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-16cifs: on CONFIG_HIGHMEM machines, limit the rsize/wsize to the kmap spaceJeff Layton1-0/+18
We currently rely on being able to kmap all of the pages in an async read or write request. If you're on a machine that has CONFIG_HIGHMEM set then that kmap space is limited, sometimes to as low as 512 slots. With 512 slots, we can only support up to a 2M r/wsize, and that's assuming that we can get our greedy little hands on all of them. There are other users however, so it's possible we'll end up stuck with a size that large. Since we can't handle a rsize or wsize larger than that currently, cap those options at the number of kmap slots we have. We could consider capping it even lower, but we currently default to a max of 1M. Might as well allow those luddites on 32 bit arches enough rope to hang themselves. A more robust fix would be to teach the send and receive routines how to contend with an array of pages so we don't need to marshal up a kvec array at all. That's a fairly significant overhaul though, so we'll need this limit in place until that's ready. Cc: <stable@vger.kernel.org> Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-16Initialise mid_q_entry before putting it on the pending queueSachin Prabhu1-12/+14
A user reported a crash in cifs_demultiplex_thread() caused by an incorrectly set mid_q_entry->callback() function. It appears that the callback assignment made in cifs_call_async() was not flushed back to memory suggesting that a memory barrier was required here. Changing the code to make sure that the mid_q_entry structure was completely initialised before it was added to the pending queue fixes the problem. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-03cifs: when server doesn't set CAP_LARGE_READ_X, cap default rsize at ↵Jeff Layton1-6/+3
MaxBufferSize When the server doesn't advertise CAP_LARGE_READ_X, then MS-CIFS states that you must cap the size of the read at the client's MaxBufferSize. Unfortunately, testing with many older servers shows that they often can't service a read larger than their own MaxBufferSize. Since we can't assume what the server will do in this situation, we must be conservative here for the default. When the server can't do large reads, then assume that it can't satisfy any read larger than its MaxBufferSize either. Luckily almost all modern servers can do large reads, so this won't affect them. This is really just for older win9x and OS/2 era servers. Also, note that this patch just governs the default rsize. The admin can always override this if he so chooses. Cc: <stable@vger.kernel.org> # 3.2 Reported-by: David H. Durgee <dhdurgee@acm.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steven French <sfrench@w500smf.(none)>
2012-06-12cifs: fix parsing of password mount optionSuresh Jayaraman1-15/+17
The double delimiter check that allows a comma in the password parsing code is unconditional. We set "tmp_end" to the end of the string and we continue to check for double delimiter. In the case where the password doesn't contain a comma we end up setting tmp_end to NULL and eventually setting "options" to "end". This results in the premature termination of the options string and hence the values of UNCip and UNC are being set to NULL. This results in mount failure with "Connecting to DFS root not implemented yet" error. This error is usually not noticable as we have password as the last option in the superblock mountdata. But when we call expand_dfs_referral() from cifs_mount() and try to compose mount options for the submount, the resulting mountdata will be of the form ",ver=1,user=foo,pass=bar,ip=x.x.x.x,unc=\\server\share" and hence results in the above error. This bug has been seen with older NAS servers running Samba 3.0.24. Fix this by moving the double delimiter check inside the conditional loop. Changes since -v1 - removed the wrong strlen() micro optimization. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Cc: stable@vger.kernel.org [3.1+] Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-06-01CIFS: Move get_next_mid to ops structPavel Shilovsky7-95/+103
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-06-01CIFS: Make accessing is_valid_oplock/dump_detail ops struct field safePavel Shilovsky1-2/+4
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-06-01CIFS: Improve identation in cifs_unlock_rangePavel Shilovsky1-40/+35
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-06-01CIFS: Fix possible wrong memory allocationPavel Shilovsky1-6/+25
when cifs_reconnect sets maxBuf to 0 and we try to calculate a size of memory we need to store locks. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-29Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds17-587/+1039
Pull CIFS updates from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (29 commits) cifs: fix oops while traversing open file list (try #4) cifs: Fix comment as d_alloc_root() is replaced by d_make_root() CIFS: Introduce SMB2 mounts as vers=2.1 CIFS: Introduce SMB2 Kconfig option CIFS: Move add/set_credits and get_credits_field to ops structure CIFS: Move protocol specific demultiplex thread calls to ops struct CIFS: Move protocol specific part from cifs_readv_receive to ops struct CIFS: Move header_size/max_header_size to ops structure CIFS: Move protocol specific part from SendReceive2 to ops struct cifs: Include backup intent search flags during searches {try #2) CIFS: Separate protocol specific part from setlk CIFS: Separate protocol specific part from getlk CIFS: Separate protocol specific lock type handling CIFS: Convert lock type to 32 bit variable CIFS: Move locks to cifsFileInfo structure cifs: convert send_nt_cancel into a version specific op cifs: add a smb_version_operations/values structures and a smb_version enum cifs: remove the vers= and version= synonyms for ver= cifs: add warning about change in default cache semantics in 3.7 cifs: display cache= option in /proc/mounts ...
2012-05-28Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds1-1/+1
Pull writeback tree from Wu Fengguang: "Mainly from Jan Kara to avoid iput() in the flusher threads." * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Avoid iput() from flusher thread vfs: Rename end_writeback() to clear_inode() vfs: Move waiting for inode writeback from end_writeback() to evict_inode() writeback: Refactor writeback_single_inode() writeback: Remove wb->list_lock from writeback_single_inode() writeback: Separate inode requeueing after writeback writeback: Move I_DIRTY_PAGES handling writeback: Move requeueing when I_SYNC set to writeback_sb_inodes() writeback: Move clearing of I_SYNC into inode_sync_complete() writeback: initialize global_dirty_limit fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds mm: page-writeback.c: local functions should not be exposed globally
2012-05-23cifs: fix oops while traversing open file list (try #4)Shirish Pargaonkar2-24/+34
While traversing the linked list of open file handles, if the identfied file handle is invalid, a reopen is attempted and if it fails, we resume traversing where we stopped and cifs can oops while accessing invalid next element, for list might have changed. So mark the invalid file handle and attempt reopen if no valid file handle is found in rest of the list. If reopen fails, move the invalid file handle to the end of the list and start traversing the list again from the begining. Repeat this four times before giving up and returning an error if file reopen keeps failing. Cc: <stable@vger.kernel.org> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23cifs: Fix comment as d_alloc_root() is replaced by d_make_root()Sedat Dilek1-1/+1
For more details see <file: Documentation/filesystems/porting>. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Introduce SMB2 mounts as vers=2.1Steve French4-1/+41
As with Linux nfs client, which uses "nfsvers=" or "vers=" to indicate which protocol to use for mount, specifying "vers=2.1" will force an SMB2 mount. When vers is not specified CIFS is used "vers=1" We can eventually autonegotiate down from SMB2 to CIFS when SMB2 is stable enough to make it the default, but this is for the future. At that time we could also implement a "maxprotocol" mount option as smbclient and Samba have today, but that would be premature until SMB2 is stable. Intially the SMB2 Kconfig option will depend on "BROKEN" until the merge is complete, and then be "EXPERIMENTAL" When it is no longer experimental we can consider changing the default protocol to attempt first. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Introduce SMB2 Kconfig optionSteve French1-0/+20
SMB2 is the followon to the CIFS (and SMB) protocols and the default for Windows since Windows Vista, and also now implemented by various non-Windows servers. SMB2 is more secure, has various performance advantages, including larger i/o sizes, flow control, better caching model and more. SMB2 also resolves some scalability limits in the CIFS protocol and adds many new features while being much simpler (only a few dozen commands instead of hundreds) and since the protocol is clearer it is also more consistently implemented across servers and thus easier to optimize. After much discussion with Jeff Layton, Jeremy Allison and others at Connectathon, we decided to move the SMB2 code from a distinct .ko and fstype into distinct C files that optionally build in cifs.ko. As a result the Kconfig gets simpler. To avoid destabilizing CIFS, the SMB2 code is going to be moved into its own experimental CONFIG_CIFS_SMB2 ifdef as it is merged and rereviewed. The changes to stable CIFS (builds with the SMB2 ifdef off) are expected to be fairly small. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move add/set_credits and get_credits_field to ops structurePavel Shilovsky7-50/+62
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move protocol specific demultiplex thread calls to ops structPavel Shilovsky5-27/+39
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move protocol specific part from cifs_readv_receive to ops structPavel Shilovsky3-27/+33
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move header_size/max_header_size to ops structurePavel Shilovsky4-23/+20
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move protocol specific part from SendReceive2 to ops structPavel Shilovsky4-3/+15
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-17cifs: Include backup intent search flags during searches {try #2)Shirish Pargaonkar3-11/+22
As observed and suggested by Tushar Gosavi... --------- readdir calls these function to send TRANS2_FIND_FIRST and TRANS2_FIND_NEXT command to the server. The current cifs module is not specifying CIFS_SEARCH_BACKUP_SEARCH flag while sending these command when backupuid/backupgid is specified. This can be resolved by specifying CIFS_SEARCH_BACKUP_SEARCH flag. --------- Cc: <stable@kernel.org> Reported-and-Tested-by: Tushar Gosavi <tugosavi@in.ibm.com> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-17CIFS: Separate protocol specific part from setlkPavel Shilovsky1-2/+2
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-17CIFS: Separate protocol specific part from getlkPavel Shilovsky3-22/+39
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-16CIFS: Separate protocol specific lock type handlingPavel Shilovsky3-16/+33
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-16CIFS: Convert lock type to 32 bit variablePavel Shilovsky2-7/+8
to handle SMB2 lock type field further. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-16CIFS: Move locks to cifsFileInfo structurePavel Shilovsky3-44/+58
CIFS brlock cache can be used by several file handles if we have a write-caching lease on the file that is supported by SMB2 protocol. Prepate the code to handle this situation correctly by sorting brlocks by a fid to easily push them in portions when lease break comes. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-16cifs: convert send_nt_cancel into a version specific opJeff Layton3-39/+54
For SMB2, this should be a no-op. Obviously if we wanted to do something for the SMB2 case, we could also define an operation here for it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-16cifs: add a smb_version_operations/values structures and a smb_version enumJeff Layton5-2/+89
We need a way to dispatch different operations for different versions. Behold the smb_version_operations/values structures. For now, those structures just hold the version enum value and nothing uses them. Eventually, we'll expand them to cover other operations/values as we change the callers to dispatch from here. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-05-16cifs: remove the vers= and version= synonyms for ver=Jeff Layton1-4/+1
We want these to mean something different entirely, and the mount.cifs helper only ever passed in ver= automatically. Also, don't allow ver=cifs anymore since that was never passed in by the mount helper. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: add warning about change in default cache semantics in 3.7Jeff Layton1-0/+13
Add a warning that will be displayed when there is no cache= option specified. We want to ensure that users are aware of the change in defaults coming in 3.7. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: display cache= option in /proc/mountsJeff Layton1-4/+14
...and deprecate the display of strictcache, forcedirectio, and fsc as separate options. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: add deprecation warnings to strictcache and forcedirectioJeff Layton1-0/+6
Leave them in for 2 releases and remove for 3.7. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: add a cache= option to better describe the different cache flavorsJeff Layton1-3/+54
Currently, we have several mount options that control cifs' cache behavior, but those options aren't considered to be mutually exclusive. The result is poorly-defined when someone specifies more than one of these options at mount time. Fix this by adding a new cache= mount option that will supercede "strictcache", and "forcedirectio". That will help make it clear that these options are mutually exclusive. Also, change the legacy options to be mutually exclusive too, to ensure that users don't get surprises. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: add a deprecation warning to CIFS_IOC_CHECKUMOUNT ioctlJeff Layton1-0/+8
This was used by an ancient version of umount.cifs and in nowhere else that I'm aware of. Let's add a warning now and dump it for 3.7. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: remove legacy MultiuserMount optionJeff Layton5-109/+1
We've now warned about this for two releases. Remove it for 3.5. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: convert cifs_iovec_read to use async readsJeff Layton2-60/+236
Convert cifs_iovec_read to use async I/O. This also raises the limit on the rsize for uncached reads. We first allocate a set of pages to hold the replies, then issue the reads in parallel and then collect the replies and copy the results into the iovec. A possible future optimization would be to kmap and inline the iovec buffers and read the data directly from the socket into that. That would require some rather complex conversion of the iovec into a kvec however. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: add wrapper for cifs_async_readv to retry opening fileJeff Layton1-9/+18
We'll need this same bit of code for the uncached case. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: add refcounting to cifs_readdata structuresJeff Layton3-7/+19
This isn't strictly necessary for the async readpages code, but the uncached version will need to be able to collect the replies after issuing the calls. Add a kref to cifs_readdata and use change the code to take and put references appropriately. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: abstract out function to marshal the iovec for readv receivesJeff Layton3-63/+74
Cached and uncached reads will need to do different things here to handle the difference when the pages are in pagecache and not. Abstract out the function that marshals the page list into a kvec array. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: make cifs_readdata_alloc take a work_func_t argJeff Layton3-53/+49
We'll need different completion routines for an uncached read. Allow the caller to set the one he needs at allocation time. Also, move most of these functions to file.c so we can make more of them static. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16cifs: fix misspelling of "forcedirectio"Jeff Layton1-1/+2
...and add a "directio" synonym since that's what the manpage has always advertised. Acked-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-09cifs: fix revalidation test in cifs_llseek()Dan Carpenter1-1/+1
This test is always true so it means we revalidate the length every time, which generates more network traffic. When it is SEEK_SET or SEEK_CUR, then we don't need to revalidate. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-06vfs: Rename end_writeback() to clear_inode()Jan Kara1-1/+1
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-03fs/cifs: fix parsing of dfs referralsStefan Metzmacher1-1/+5
The problem was that the first referral was parsed more than once and so the caller tried the same referrals multiple times. The problem was introduced partly by commit 066ce6899484d9026acd6ba3a8dbbedb33d7ae1b, where 'ref += le16_to_cpu(ref->Size);' got lost, but that was also wrong... Cc: <stable@vger.kernel.org> Signed-off-by: Stefan Metzmacher <metze@samba.org> Tested-by: Björn Jacke <bj@sernet.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-03cifs: make sure we ignore the credentials= and cred= optionsJeff Layton1-0/+2
Older mount.cifs programs passed this on to the kernel after parsing the file. Make sure the kernel ignores that option. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=43195 Cc: Sachin Prabhu <sprabhu@redhat.com> Reported-by: Ronald <ronald645@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-03[CIFS] Update cifs version to 1.78Steve French1-1/+1
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-03cifs - check S_AUTOMOUNT in revalidateIan Kent1-5/+12
When revalidating a dentry, if the inode wasn't known to be a dfs entry when the dentry was instantiated, such as when created via ->readdir(), the DCACHE_NEED_AUTOMOUNT flag needs to be set on the dentry in ->d_revalidate(). The false return from cifs_d_revalidate(), due to the inode now being marked with the S_AUTOMOUNT flag, might not invalidate the dentry if there is a concurrent unlazy path walk. This is because the dentry reference count will be at least 2 in this case causing d_invalidate() to return EBUSY. So the asumption that the dentry will be discarded then correctly instantiated via ->lookup() might not hold. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Layton <jlayton@redhat.com> Cc: Steve French <smfrench@gmail.com> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-01cifs: add missing initialization of server->req_lockJeff Layton1-0/+1
Cc: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-01cifs: don't cap ra_pages at the same level as default_backing_dev_infoJeff Layton1-17/+1
While testing, I've found that even when we are able to negotiate a much larger rsize with the server, on-the-wire reads often end up being capped at 128k because of ra_pages being capped at that level. Lifting this restriction gave almost a twofold increase in sequential read performance on my craptactular KVM test rig with a 1M rsize. I think this is safe since the actual ra_pages that the VM requests is run through max_sane_readahead() prior to submitting the I/O. Under memory pressure we should end up with large readahead requests being suppressed anyway. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 05:30:29 +0000