summaryrefslogtreecommitdiffstats
path: root/fs/cifs
AgeCommit message (Collapse)AuthorFilesLines
2014-04-16cif: fix dead codeMichael Opdenacker1-1/+1
This issue was found by Coverity (CID 1202536) This proposes a fix for a statement that creates dead code. The "rc < 0" statement is within code that is run with "rc > 0". It seems like "err < 0" was meant to be used here. This way, the error code is returned by the function. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-16cifs: fix error handling cifs_user_readvJeff Layton1-1/+1
Coverity says: *** CID 1202537: Dereference after null check (FORWARD_NULL) /fs/cifs/file.c: 2873 in cifs_user_readv() 2867 cur_len = min_t(const size_t, len - total_read, cifs_sb->rsize); 2868 npages = DIV_ROUND_UP(cur_len, PAGE_SIZE); 2869 2870 /* allocate a readdata struct */ 2871 rdata = cifs_readdata_alloc(npages, 2872 cifs_uncached_readv_complete); >>> CID 1202537: Dereference after null check (FORWARD_NULL) >>> Comparing "rdata" to null implies that "rdata" might be null. 2873 if (!rdata) { 2874 rc = -ENOMEM; 2875 goto error; 2876 } 2877 2878 rc = cifs_read_allocate_pages(rdata, npages); ...when we "goto error", rc will be non-zero, and then we end up trying to do a kref_put on the rdata (which is NULL). Fix this by replacing the "goto error" with a "break". Reported-by: <scan-admin@coverity.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-16fs: cifs: remove unused variable.Cyril Roelandt1-2/+0
In SMB2_set_compression(), the "res_key" variable is only initialized to NULL and later kfreed. It is therefore useless and should be removed. Found with the following semantic patch: <smpl> @@ identifier foo; identifier f; type T; @@ * f(...) { ... * T *foo = NULL; ... when forall when != foo * kfree(foo); ... } </smpl> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2014-04-16Return correct error on query of xattr on file with empty xattrsSteve French1-0/+3
xfstest 020 detected a problem with cifs xattr handling. When a file had an empty xattr list, we returned success (with an empty xattr value) on query of particular xattrs rather than returning ENODATA. This patch fixes it so that query of an xattr returns ENODATA when the xattr list is empty for the file. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com>
2014-04-16cifs: Wait for writebacks to complete before attempting write.Sachin Prabhu8-9/+164
Problem reported in Red Hat bz 1040329 for strict writes where we cache only when we hold oplock and write direct to the server when we don't. When we receive an oplock break, we first change the oplock value for the inode in cifsInodeInfo->oplock to indicate that we no longer hold the oplock before we enqueue a task to flush changes to the backing device. Once we have completed flushing the changes, we return the oplock to the server. There are 2 ways here where we can have data corruption 1) While we flush changes to the backing device as part of the oplock break, we can have processes write to the file. These writes check for the oplock, find none and attempt to write directly to the server. These direct writes made while we are flushing from cache could be overwritten by data being flushed from the cache causing data corruption. 2) While a thread runs in cifs_strict_writev, the machine could receive and process an oplock break after the thread has checked the oplock and found that it allows us to cache and before we have made changes to the cache. In that case, we end up with a dirty page in cache when we shouldn't have any. This will be flushed later and will overwrite all subsequent writes to the part of the file represented by this page. Before making any writes to the server, we need to confirm that we are not in the process of flushing data to the server and if we are, we should wait until the process is complete before we attempt the write. We should also wait for existing writes to complete before we process an oplock break request which changes oplock values. We add a version specific downgrade_oplock() operation to allow for differences in the oplock values set for the different smb versions. Cc: stable@vger.kernel.org Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-13cifs: Use min_t() when comparing "size_t" and "unsigned long"Geert Uytterhoeven1-1/+1
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the following warning when comparing with PAGE_SIZE, which is always "unsigned long": fs/cifs/file.c: In function ‘cifs_readdata_to_iov’: fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast Introduced by commit 7f25bba819a3 ("cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()"), which changed the signedness of "remaining" and the code from min_t() to min(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds2-77/+52
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-12cifs: fix the race in cifs_writev()Al Viro1-5/+18
O_APPEND handling there hadn't been completely fixed by Pavel's patch; it checks the right value, but it's racy - we can't really do that until i_mutex has been taken. Fix by switching to __generic_file_aio_write() (open-coding generic_file_aio_write(), actually) and pulling mutex_lock() above inode_size_read(). Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-07mm: implement ->map_pages for page cacheKirill A. Shutemov1-0/+1
filemap_map_pages() is generic implementation of ->map_pages() for filesystems who uses page cache. It should be safe to use filemap_map_pages() for ->map_pages() if filesystem use filemap_fault() for ->fault(). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Major changes for 3.14 include support for the newly added ZERO_RANGE and COLLAPSE_RANGE fallocate operations, and scalability improvements in the jbd2 layer and in xattr handling when the extended attributes spill over into an external block. Other than that, the usual clean ups and minor bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits) ext4: fix premature freeing of partial clusters split across leaf blocks ext4: remove unneeded test of ret variable ext4: fix comment typo ext4: make ext4_block_zero_page_range static ext4: atomically set inode->i_flags in ext4_set_inode_flags() ext4: optimize Hurd tests when reading/writing inodes ext4: kill i_version support for Hurd-castrated file systems ext4: each filesystem creates and uses its own mb_cache fs/mbcache.c: doucple the locking of local from global data fs/mbcache.c: change block and index hash chain to hlist_bl_node ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate ext4: refactor ext4_fallocate code ext4: Update inode i_size after the preallocation ext4: fix partial cluster handling for bigalloc file systems ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents ext4: only call sync_filesystm() when remounting read-only fs: push sync_filesystem() down to the file system's remount_fs() jbd2: improve error messages for inconsistent journal heads jbd2: minimize region locked by j_list_lock in jbd2_journal_forget() jbd2: minimize region locked by j_list_lock in journal_get_create_access() ...
2014-04-03mm + fs: store shadow entries in page cacheJohannes Weiner1-1/+1
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03fs/cifs/cifsfs.c: add __init to cifs_init_inodecache()Fabian Frederick1-1/+1
cifs_init_inodecache is only called by __init init_cifs. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-01fold cifs_iovec_read() into its (only) callerAl Viro1-18/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()Al Viro1-45/+17
... we are doing them on adjacent parts of file, so what happens is that each subsequent call works to rebuild the iov_iter to exact state it had been abandoned in by previous one. Just keep it through the entire cifs_iovec_read(). And use copy_page_to_iter() instead of doing kmap/copy_to_user/kunmap manually... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01cifs_iovec_read(): resubmit shouldn't restart the loopAl Viro1-8/+8
... by that point the request we'd just resent is in the head of the list anyway. Just return to the beginning of the loop body... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01cifs: ->rename() without ->lookup() makes no senseAl Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-13fs: push sync_filesystem() down to the file system's remount_fs()Theodore Ts'o1-0/+1
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-02-28cifs: mask off top byte in get_rfc1002_length()Jeff Layton1-1/+1
The rfc1002 length actually includes a type byte, which we aren't masking off. In most cases, it's not a problem since the RFC1002_SESSION_MESSAGE type is 0, but when doing a RFC1002 session establishment, the type is non-zero and that throws off the returned length. Signed-off-by: Jeff Layton <jlayton@redhat.com> Tested-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-23cifs: sanity check length of data to send before sendingJeff Layton1-0/+29
We had a bug discovered recently where an upper layer function (cifs_iovec_write) could pass down a smb_rqst with an invalid amount of data in it. The length of the SMB frame would be correct, but the rqst struct would cause smb_send_rqst to send nearly 4GB of data. This should never be the case. Add some sanity checking to the beginning of smb_send_rqst that ensures that the amount of data we're going to send agrees with the length in the RFC1002 header. If it doesn't, WARN() and return -EIO to the upper layers. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-23CIFS: Fix wrong pos argument of cifs_find_lock_conflictPavel Shilovsky1-18/+6
and use generic_file_aio_write rather than __generic_file_aio_write in cifs_writev. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-17Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds10-28/+78
Pull CIFS fixes from Steve French: "Three cifs fixes, the most important fixing the problem with passing bogus pointers with writev (CVE-2014-0069). Two additional cifs fixes are still in review (including the fix for an append problem which Al also discovered)" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix too big maxBuf size for SMB3 mounts cifs: ensure that uncached writes handle unmapped areas correctly [CIFS] Fix cifsacl mounts over smb2 to not call cifs
2014-02-14CIFS: Fix too big maxBuf size for SMB3 mountsPavel Shilovsky3-11/+10
SMB3 servers can respond with MaxTransactSize of more than 4M that can cause a memory allocation error returned from kmalloc in a lock codepath. Also the client doesn't support multicredit requests now and allows buffer sizes of 65536 bytes only. Set MaxTransactSize to this maximum supported value. Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-14cifs: ensure that uncached writes handle unmapped areas correctlyJeff Layton1-3/+34
It's possible for userland to pass down an iovec via writev() that has a bogus user pointer in it. If that happens and we're doing an uncached write, then we can end up getting less bytes than we expect from the call to iov_iter_copy_from_user. This is CVE-2014-0069 cifs_iovec_write isn't set up to handle that situation however. It'll blindly keep chugging through the page array and not filling those pages with anything useful. Worse yet, we'll later end up with a negative number in wdata->tailsz, which will confuse the sending routines and cause an oops at the very least. Fix this by having the copy phase of cifs_iovec_write stop copying data in this situation and send the last write as a short one. At the same time, we want to avoid sending a zero-length write to the server, so break out of the loop and set rc to -EFAULT if that happens. This also allows us to handle the case where no address in the iovec is valid. [Note: Marking this for stable on v3.4+ kernels, but kernels as old as v2.6.38 may have a similar problem and may need similar fix] Cc: <stable@vger.kernel.org> # v3.4+ Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-10[CIFS] Fix cifsacl mounts over smb2 to not call cifsSteve French7-14/+34
When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option, it was trying to get the mode by querying the acl over the cifs rather than smb2 protocol. This patch makes that protocol independent and makes cifsacl smb2 mounts return a more intuitive operation not supported error (until we add a worker function for smb2_get_acl). Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr which would unconditionally call cifs_get_acl and cifs_set_acl (even when mounted smb2). I made those protocol independent last week (new protocol version operations "get_acl" and "set_acl" but did not add an smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP which at least is better than sending cifs requests on smb2 mount) The previous patches did not fix the one remaining case though ie mounting with "cifsacl" when getting mode from acl would unconditionally end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol independent but to make that protocol independent had to make sure that the callers were passing the protocol independent handle structure (cifs_fid) instead of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid) Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl) to enable this. Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-10Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds10-39/+91
Pull CIFS fixes from Steve French: "Small fix from Jeff for writepages leak, and some fixes for ACLs and xattrs when SMB2 enabled. Am expecting another fix from Jeff and at least one more fix (for mounting SMB2 with cifsacl) in the next week" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] clean up page array when uncached write send fails cifs: use a flexarray in cifs_writedata retrieving CIFS ACLs when mounted with SMB2 fails dropping session Add protocol specific operation for CIFS xattrs
2014-02-09fix O_SYNC|O_APPEND syncing the wrong range on write()Al Viro1-2/+2
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support) when sync_page_range() had been introduced; generic_file_write{,v}() correctly synced pos_after_write - written .. pos_after_write - 1 but generic_file_aio_write() synced pos_before_write .. pos_before_write + written - 1 instead. Which is not the same thing with O_APPEND, obviously. A couple of years later correct variant had been killed off when everything switched to use of generic_file_aio_write(). All users of generic_file_aio_write() are affected, and the same bug has been copied into other instances of ->aio_write(). The fix is trivial; the only subtle point is that generic_write_sync() ought to be inlined to avoid calculations useless for the majority of calls. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-07[CIFS] clean up page array when uncached write send failsSteve French6-19/+33
In the event that a send fails in an uncached write, or we end up needing to reissue it (-EAGAIN case), we'll kfree the wdata but the pages currently leak. Fix this by adding a new kref release routine for uncached writedata that releases the pages, and have the uncached codepaths use that. [original patch by Jeff modified to fix minor formatting problems] Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-07cifs: use a flexarray in cifs_writedataJeff Layton2-8/+2
The cifs_writedata code uses a single element trailing array, which just adds unneeded complexity. Use a flexarray instead. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-07retrieving CIFS ACLs when mounted with SMB2 fails dropping sessionSteve French4-8/+43
The get/set ACL xattr support for CIFS ACLs attempts to send old cifs dialect protocol requests even when mounted with SMB2 or later dialects. Sending cifs requests on an smb2 session causes problems - the server drops the session due to the illegal request. This patch makes CIFS ACL operations protocol specific to fix that. Attempting to query/set CIFS ACLs for SMB2 will now return EOPNOTSUPP (until we add worker routines for sending query ACL requests via SMB2) instead of sending invalid (cifs) requests. A separate followon patch will be needed to fix cifs_acl_to_fattr (which takes a cifs specific u16 fid so can't be abstracted to work with SMB2 until that is changed) and will be needed to fix mount problems when "cifsacl" is specified on mount with e.g. vers=2.1 Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> CC: Stable <stable@kernel.org>
2014-02-07Add protocol specific operation for CIFS xattrsSteve French2-4/+13
Changeset 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 added protocol operations for get/setxattr to avoid calling cifs operations on smb2/smb3 mounts for xattr operations and this changeset adds the calls to cifs specific protocol operations for xattrs (in order to reenable cifs support for xattrs which was temporarily disabled by the previous changeset. We do not have SMB2/SMB3 worker function for setting xattrs yet so this only enables it for cifs. CCing stable since without these two small changsets (its small coreq 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 is also needed) calling getfattr/setfattr on smb2/smb3 mounts causes problems. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> CC: Stable <stable@kernel.org>
2014-01-31cifs: Fix check for regular file in couldbe_mf_symlink()Sachin Prabhu1-1/+1
MF Symlinks are regular files containing content in a specified format. The function couldbe_mf_symlink() checks the mode for a set S_IFREG bit as a test to confirm that it is a regular file. This bit is also set for other filetypes and simply checking for this bit being set may return false positives. We ensure that we are actually checking for a regular file by using the S_ISREG macro to test instead. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reported-by: Neil Brown <neilb@suse.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-26[CIFS] Fix SMB2 mounts so they don't try to set or get xattrs via cifsSteve French2-19/+36
When mounting with smb2 (or smb2.1 or smb3) we need to check to make sure that attempts to query or set extended attributes do not attempt to send the request with the older cifs protocol instead (eventually we also need to add the support in SMB2 to query/set extended attributes but this patch prevents us from using the wrong protocol for extended attribute operations). Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20CIFS: Cleanup cifs open codepathPavel Shilovsky8-100/+174
Rename CIFSSMBOpen to CIFS_open and make it take cifs_open_parms structure as a parm. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20CIFS: Remove extra indentation in cifs_sfu_typePavel Shilovsky1-47/+50
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20CIFS: Cleanup cifs_mknodPavel Shilovsky1-26/+22
Rename camel case variable and fix comment style. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20CIFS: Cleanup CIFSSMBOpenPavel Shilovsky2-72/+86
Remove indentation, fix comment style, rename camel case variables in preparation to make it work with cifs_open_parms structure as a parm. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Add support for follow_link on dfs shares under posix extensionsSachin Prabhu1-0/+32
When using posix extensions, dfs shares in the dfs root show up as symlinks resulting in userland tools such as 'ls' calling readlink() on these shares. Since these are dfs shares, we end up returning -EREMOTE. $ ls -l /mnt ls: cannot read symbolic link /mnt/test: Object is remote total 0 lrwxrwxrwx. 1 root root 19 Nov 6 09:47 test With added follow_link() support for dfs shares, when using unix extensions, we call GET_DFS_REFERRAL to obtain the DFS referral and return the first node returned. The dfs share in the dfs root is now displayed in the following manner. $ ls -l /mnt total 0 lrwxrwxrwx. 1 root root 19 Nov 6 09:47 test -> \vm140-31\test Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: move unix extension call to cifs_query_symlink()Sachin Prabhu2-10/+15
Unix extensions rigth now are only applicable to smb1 operations. Move the check and subsequent unix extension call to the smb1 specific call to query_symlink() ie. cifs_query_symlink(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Re-order M-F Symlink codeSachin Prabhu1-56/+68
This patch makes cosmetic changes. We group similar functions together and separate out the protocol specific functions. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Add create MFSymlinks to protocol ops structSachin Prabhu4-42/+54
Add a new protocol ops function create_mf_symlink and have create_mf_symlink() use it. This patchset moves the MFSymlink operations completely to the ops structure so that we only use the right protocol versions when querying or creating MFSymlinks. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: use protocol specific call for query_mf_symlink()Sachin Prabhu1-41/+20
We have an existing protocol specific call query_mf_symlink() created for check_mf_symlink which can also be used for query_mf_symlink(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Rename MF symlink function namesSachin Prabhu4-26/+24
Clean up camel case in functionnames. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20cifs: Rename and cleanup open_query_close_cifs_symlink()Sachin Prabhu4-31/+20
Rename open_query_close_cifs_symlink to cifs_query_mf_symlink() to make the name more consistent with other protocol version specific functions. We also pass tcon as an argument to the function. This is already available in the calling functions and we can avoid having to make an unnecessary lookup. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-19cifs: Fix memory leak in cifs_hardlink()Christian Engelmayer1-2/+4
Fix a potential memory leak in the cifs_hardlink() error handling path. Detected by Coverity: CID 728510, CID 728511. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Steve French <smfrench@gmail.com>
2013-12-27cifs: set FILE_CREATEDShirish Pargaonkar1-5/+6
Set FILE_CREATED on O_CREAT|O_EXCL. cifs code didn't change during commit 116cc0225381415b96551f725455d067f63a76a0 Kernel bugzilla 66251 Signed-off-by: Shirish Pargaonkar <spargaonkar@suse.com> Acked-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-12-27cifs: We do not drop reference to tlink in CIFSCheckMFSymlink()Sachin Prabhu3-20/+19
When we obtain tcon from cifs_sb, we use cifs_sb_tlink() to first obtain tlink which also grabs a reference to it. We do not drop this reference to tlink once we are done with the call. The patch fixes this issue by instead passing tcon as a parameter and avoids having to obtain a reference to the tlink. A lookup for the tcon is already made in the calling functions and this way we avoid having to re-run the lookup. This is also consistent with the argument list for other similar calls for M-F symlinks. We should also return an ENOSYS when we do not find a protocol specific function to lookup the MF Symlink data. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-12-27Add missing end of line termination to some cifs messagesSteve French1-3/+3
Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Gregor Beck <gbeck@sernet.de> Reviewed-by: Jeff Layton <jlayton@redhat.com>
2013-11-25[CIFS] Do not use btrfs refcopy ioctl for SMB2 copy offloadSteve French1-2/+4
Change cifs.ko to using CIFS_IOCTL_COPYCHUNK instead of BTRFS_IOC_CLONE to avoid confusion about whether copy-on-write is required or optional for this operation. SMB2/SMB3 copyoffload had used the BTRFS_IOC_CLONE ioctl since they both speed up copy by offloading the copy rather than passing many read and write requests back and forth and both have identical syntax (passing file handles), but for SMB2/SMB3 CopyChunk the server is not required to use copy-on-write to make a copy of the file (although some do), and Christoph has commented that since CopyChunk does not require copy-on-write we should not reuse BTRFS_IOC_CLONE. This patch renames the ioctl to use a cifs specific IOCTL CIFS_IOCTL_COPYCHUNK. This ioctl is particularly important for SMB2/SMB3 since large file copy over the network otherwise can be very slow, and with this is often more than 100 times faster putting less load on server and client. Note that if a copy syscall is ever introduced, depending on its requirements/format it could end up using one of the other three methods that CIFS/SMB2/SMB3 can do for copy offload, but this method is particularly useful for file copy and broadly supported (not just by Samba server). Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: David Disseldorp <ddiss@samba.org>
2013-11-19Check SMB3 dialects against downgrade attacksSteve French6-4/+90
When we are running SMB3 or SMB3.02 connections which are signed we need to validate the protocol negotiation information, to ensure that the negotiate protocol response was not tampered with. Add the missing FSCTL which is sent at mount time (immediately after the SMB3 Tree Connect) to validate that the capabilities match what we think the server sent. "Secure dialect negotiation is introduced in SMB3 to protect against man-in-the-middle attempt to downgrade dialect negotiation. The idea is to prevent an eavesdropper from downgrading the initially negotiated dialect and capabilities between the client and the server." For more explanation see 2.2.31.4 of MS-SMB2 or http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-18Removed duplicated (and unneeded) gotoSteve French1-4/+2
Remove an unneeded goto (and also was duplicated goto target name). Signed-off-by: Steve French <smfrench@gmail.com>