summaryrefslogtreecommitdiffstats
path: root/fs/cifs/transport.c
AgeCommit message (Collapse)AuthorFilesLines
2014-08-02CIFS: Use multicredits for SMB 2.1/3 writesPavel Shilovsky1-7/+18
If we negotiate SMB 2.1 and higher version of the protocol and a server supports large write buffer size, we need to consume 1 credit per 65536 bytes. So, we need to know how many credits we have and obtain the required number of them before constructing a writedata structure in writepages and iovec write. Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-23cifs: sanity check length of data to send before sendingJeff Layton1-0/+29
We had a bug discovered recently where an upper layer function (cifs_iovec_write) could pass down a smb_rqst with an invalid amount of data in it. The length of the SMB frame would be correct, but the rqst struct would cause smb_send_rqst to send nearly 4GB of data. This should never be the case. Add some sanity checking to the beginning of smb_send_rqst that ensures that the amount of data we're going to send agrees with the length in the RFC1002 header. If it doesn't, WARN() and return -EIO to the upper layers. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02cifs: Send a logoff request before removing a smb sessionShirish Pargaonkar1-2/+9
Send a smb session logoff request before removing smb session off of the list. On a signed smb session, remvoing a session off of the list before sending a logoff request results in server returning an error for lack of smb signature. Never seen an error during smb logoff, so as per MS-SMB2 3.2.5.1, not sure how an error during logoff should be retried. So for now, if a server returns an error to a logoff request, log the error and remove the session off of the list. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02cifs: Make big endian multiplex ID sequences monotonic on the wireTim Gardner1-1/+1
The multiplex identifier (MID) in the SMB header is only ever used by the client, in conjunction with PID, to match responses from the server. As such, the endianess of the MID is not important. However, When tracing packet sequences on the wire, protocol analyzers such as wireshark display MID as little endian. It is much more informative for the on-the-wire MID sequences to match debug information emitted by the CIFS driver. Therefore, one should write and read MID in the SMB header assuming it is always little endian. Observed from wireshark during the protocol negotiation and session setup: Multiplex ID: 256 Multiplex ID: 256 Multiplex ID: 512 Multiplex ID: 512 Multiplex ID: 768 Multiplex ID: 768 After this patch on-the-wire MID values begin at 1 and increase monotonically. Introduce get_next_mid64() for the internal consumers that use the full 64 bit multiplex identifier. Introduce the helpers get_mid() and compare_mid() to make the endian translation clear. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Tim Gardner <timg@tpi.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-10-06cifs: Avoid umount hangs with smb2 when server is unresponsiveShirish Pargaonkar1-2/+7
Do not send SMB2 Logoff command when reconnecting, the way smb1 code base works. Also, no need to wait for a credit for an echo command when one is already in flight. Without these changes, umount command hangs if the server is unresponsive e.g. hibernating. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@us.ibm.com>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-06-24cifs: track the enablement of signing in the TCP_Server_InfoJeff Layton1-2/+2
Currently, we determine this according to flags in the sec_mode, flags in the global_secflags and via other methods. That makes the semantics very hard to follow and there are corner cases where we don't handle this correctly. Add a new bool to the TCP_Server_Info that acts as a simple flag to tell us whether signing is enabled on this connection or not, and fix up the places that need to determine this to use that flag. This is a bit weird for the SMB2 case, where signing is per-session. SMB2 needs work in this area already though. The existing SMB2 code has similar logic to what we're using here, so there should be no real change in behavior. These changes should make it easier to implement per-session signing in the future though. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-12freezer: add unsafe versions of freezable helpers for CIFSColin Cross1-1/+1
CIFS calls wait_event_freezekillable_unsafe with a VFS lock held, which is unsafe and will cause lockdep warnings when 6aa9707 "lockdep: check that no locks held at freeze time" is reapplied (it was reverted in dbf520a). CIFS shouldn't be doing this, but it has long-running syscalls that must hold a lock but also shouldn't block suspend. Until CIFS freeze handling is rewritten to use a signal to exit out of the critical section, add a new wait_event_freezekillable_unsafe helper that will not run the lockdep test when 6aa9707 is reapplied, and call it from CIFS. In practice the likley result of holding the lock while freezing is that a second task blocked on the lock will never freeze, aborting suspend, but it is possible to manufacture a case using the cgroup freezer, the lock, and the suspend freezer to create a deadlock. Silencing the lockdep warning here will allow problems to be found in other drivers that may have a more serious deadlock risk, and prevent new problems from being added. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-04cifs: store the real expected sequence number in the midJeff Layton1-1/+1
Currently, the signing routines take a pointer to a place to store the expected sequence number for the mid response. It then stores a value that's one below what that sequence number should be, and then adds one to it when verifying the signature on the response. Increment the sequence number before storing the value in the mid, and eliminate the "+1" when checking the signature. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04cifs: on send failure, readjust server sequence number downwardJeff Layton1-0/+13
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04cifs: remove ENOSPC handling in smb_sendvJeff Layton1-7/+1
To my knowledge, no one ever reported seeing this pop. Acked-by: Suresh Jayaraman <sjayaraman@novell.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04[CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches1-30/+31
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-30cifs: move check for NULL socket into smb_send_rqstJeff Layton1-3/+3
Cai reported this oops: [90701.616664] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [90701.625438] IP: [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60 [90701.632167] PGD fea319067 PUD 103fda4067 PMD 0 [90701.637255] Oops: 0000 [#1] SMP [90701.640878] Modules linked in: des_generic md4 nls_utf8 cifs dns_resolver binfmt_misc tun sg igb iTCO_wdt iTCO_vendor_support lpc_ich pcspkr i2c_i801 i2c_core i7core_edac edac_core ioatdma dca mfd_core coretemp kvm_intel kvm crc32c_intel microcode sr_mod cdrom ata_generic sd_mod pata_acpi crc_t10dif ata_piix libata megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [90701.677655] CPU 10 [90701.679808] Pid: 9627, comm: ls Tainted: G W 3.7.1+ #10 QCI QSSC-S4R/QSSC-S4R [90701.688950] RIP: 0010:[<ffffffff814a343e>] [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60 [90701.698383] RSP: 0018:ffff88177b431bb8 EFLAGS: 00010206 [90701.704309] RAX: ffff88177b431fd8 RBX: 00007ffffffff000 RCX: ffff88177b431bec [90701.712271] RDX: 0000000000000003 RSI: 0000000000000006 RDI: 0000000000000000 [90701.720223] RBP: ffff88177b431bc8 R08: 0000000000000004 R09: 0000000000000000 [90701.728185] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 [90701.736147] R13: ffff88184ef92000 R14: 0000000000000023 R15: ffff88177b431c88 [90701.744109] FS: 00007fd56a1a47c0(0000) GS:ffff88105fc40000(0000) knlGS:0000000000000000 [90701.753137] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [90701.759550] CR2: 0000000000000028 CR3: 000000104f15f000 CR4: 00000000000007e0 [90701.767512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [90701.775465] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [90701.783428] Process ls (pid: 9627, threadinfo ffff88177b430000, task ffff88185ca4cb60) [90701.792261] Stack: [90701.794505] 0000000000000023 ffff88177b431c50 ffff88177b431c38 ffffffffa014fcb1 [90701.802809] ffff88184ef921bc 0000000000000000 00000001ffffffff ffff88184ef921c0 [90701.811123] ffff88177b431c08 ffffffff815ca3d9 ffff88177b431c18 ffff880857758000 [90701.819433] Call Trace: [90701.822183] [<ffffffffa014fcb1>] smb_send_rqst+0x71/0x1f0 [cifs] [90701.828991] [<ffffffff815ca3d9>] ? schedule+0x29/0x70 [90701.834736] [<ffffffffa014fe6d>] smb_sendv+0x3d/0x40 [cifs] [90701.841062] [<ffffffffa014fe96>] smb_send+0x26/0x30 [cifs] [90701.847291] [<ffffffffa015801f>] send_nt_cancel+0x6f/0xd0 [cifs] [90701.854102] [<ffffffffa015075e>] SendReceive+0x18e/0x360 [cifs] [90701.860814] [<ffffffffa0134a78>] CIFSFindFirst+0x1a8/0x3f0 [cifs] [90701.867724] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs] [90701.875601] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs] [90701.883477] [<ffffffffa01578e6>] cifs_query_dir_first+0x26/0x30 [cifs] [90701.890869] [<ffffffffa015480d>] initiate_cifs_search+0xed/0x250 [cifs] [90701.898354] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.904486] [<ffffffffa01554cb>] cifs_readdir+0x45b/0x8f0 [cifs] [90701.911288] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.917410] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.923533] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.929657] [<ffffffff81195848>] vfs_readdir+0xb8/0xe0 [90701.935490] [<ffffffff81195b9f>] sys_getdents+0x8f/0x110 [90701.941521] [<ffffffff815d3b99>] system_call_fastpath+0x16/0x1b [90701.948222] Code: 66 90 55 65 48 8b 04 25 f0 c6 00 00 48 89 e5 53 48 83 ec 08 83 fe 01 48 8b 98 48 e0 ff ff 48 c7 80 48 e0 ff ff ff ff ff ff 74 22 <48> 8b 47 28 ff 50 68 65 48 8b 14 25 f0 c6 00 00 48 89 9a 48 e0 [90701.970313] RIP [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60 [90701.977125] RSP <ffff88177b431bb8> [90701.981018] CR2: 0000000000000028 [90701.984809] ---[ end trace 24bd602971110a43 ]--- This is likely due to a race vs. a reconnection event. The current code checks for a NULL socket in smb_send_kvec, but that's too late. By the time that check is done, the socket will already have been passed to kernel_setsockopt. Move the check into smb_send_rqst, so that it's checked earlier. In truth, this is a bit of a half-assed fix. The -ENOTSOCK error return here looks like it could bubble back up to userspace. The locking rules around the ssocket pointer are really unclear as well. There are cases where the ssocket pointer is changed without holding the srv_mutex, but I'm not clear whether there's a potential race here yet or not. This code seems like it could benefit from some fundamental re-think of how the socket handling should behave. Until then though, this patch should at least fix the above oops in most cases. Cc: <stable@vger.kernel.org> # 3.7+ Reported-and-Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-10-07[CIFS] WARN_ON_ONCE if kernel_sendmsg() returns -ENOSPCSteve French1-0/+6
kernel_sendmsg() is less likely to return -ENOSPC and it might be a bug to do so. However, in the past there might have been cases where a -ENOSPC was returned from a low level driver. Add a WARN_ON_ONCE() to ensure that it is safe to assume that -ENOSPC is no longer returned. This -ENOSPC specific handling will be removed once we are sure it is no longer returned. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24cifs: change cifs_call_async to use smb_rqst structsJeff Layton1-28/+28
For now, none of the callers populate rq_pages. That will be done for writes in a later patch. While we're at it, change the prototype of setup_async_request not to need a return pointer argument. Just return the pointer to the mid_q_entry or an ERR_PTR. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24cifs: teach signing routines how to deal with arrays of pages in a smb_rqstJeff Layton1-1/+1
Use the smb_send_rqst helper function to kmap each page in the array and update the hash for that chunk. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24cifs: teach smb_send_rqst how to handle arrays of pagesJeff Layton1-2/+54
Add code that allows smb_send_rqst to send an array of pages after the initial kvec array has been sent. For now, we simply kmap the page array and send it using the standard smb_send_kvec function. Eventually, we may want to convert this code to use kernel_sendpage under the hood and avoid the kmap altogether for the page data. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24cifs: cork the socket before a send and uncork it afterwardJeff Layton1-0/+12
We want to send SMBs as "atomically" as possible. Prior to sending any data on the socket, cork it to make sure that no non-full frames go out. Afterward, uncork it to make sure all of the data gets pushed out to the wire. Note that this more or less renders the socket=TCP_NODELAY mount option obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket, TCP_NODELAY is essentially ignored. Acked-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24cifs: convert send code to use smb_rqst structsJeff Layton1-45/+90
Again, just a change in the arguments and some function renaming here. In later patches, we'll change this code to deal with page arrays. In this patch, we add a new smb_send_rqst wrapper and have smb_sendv call that. Then we move most of the existing smb_sendv code into a new function -- smb_send_kvec. This seems a little redundant, but later we'll flesh this out to deal with arrays of pages. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24cifs: change signing routines to deal with smb_rqst structsJeff Layton1-1/+3
We need a way to represent a call to be sent on the wire that does not require having all of the page data kmapped. Behold the smb_rqst struct. This new struct represents an array of kvecs immediately followed by an array of pages. Convert the signing routines to use these structs under the hood and turn the existing functions for this into wrappers around that. For now, we're just changing these functions to take different args. Later, we'll teach them how to deal with arrays of pages. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Enable signing in SMB2Pavel Shilovsky1-12/+12
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB. Signature field in SMB2 header is 16 bytes instead of 8 bytes. Automatically enable signing by client when requested by the server when signing ability is available to the client. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-08-19cifs: print error code if smb signature verification failsSteve French1-3/+6
While trying to debug a SMB signature related issue with Windows Servers figured out it might be easier to debug if we print the error code from cifs_verify_signature(). Also, fix indendation while at it. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24CIFS: Setup async request in ops structPavel Shilovsky1-2/+2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24CIFS: Make transport routines work with SMB2Pavel Shilovsky1-7/+6
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24CIFS: Extend credit mechanism to process request typePavel Shilovsky1-31/+39
Split all requests to echos, oplocks and others - each group uses its own credit slot. This is indicated by new flags CIFS_ECHO_OP and CIFS_OBREAK_OP that are not used now for CIFS. This change is required to support SMB2 protocol because of different processing of these commands. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-23cifs: rename cifs_sign_smb2 to cifs_sign_smbvJeff Layton1-2/+2
"smb2" makes me think of the SMB2.x protocol, which isn't at all what this function is for... Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-23cifs: remove bogus reset of smb_buf_length in smb_send routinesJeff Layton1-4/+0
There's a comment here about how we don't want to modify this length, but nothing in this function actually does. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-16Initialise mid_q_entry before putting it on the pending queueSachin Prabhu1-12/+14
A user reported a crash in cifs_demultiplex_thread() caused by an incorrectly set mid_q_entry->callback() function. It appears that the callback assignment made in cifs_call_async() was not flushed back to memory suggesting that a memory barrier was required here. Changing the code to make sure that the mid_q_entry structure was completely initialised before it was added to the pending queue fixes the problem. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-06-01CIFS: Move get_next_mid to ops structPavel Shilovsky1-1/+1
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move add/set_credits and get_credits_field to ops structurePavel Shilovsky1-11/+12
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23CIFS: Move protocol specific part from SendReceive2 to ops structPavel Shilovsky1-3/+4
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-16cifs: convert send_nt_cancel into a version specific opJeff Layton1-38/+8
For SMB2, this should be a no-op. Obviously if we wanted to do something for the SMB2 case, we could also define an operation here for it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23CIFS: Change mid_q_entry structure fieldsPavel Shilovsky1-26/+26
to be protocol-unspecific and big enough to keep both CIFS and SMB2 values. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23CIFS: Separate protocol-specific code from demultiplex codePavel Shilovsky1-2/+2
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23CIFS: Separate protocol-specific code from transport routinesPavel Shilovsky1-72/+99
that lets us use this functions for SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-21CIFS: Prepare credits code for a slot reservationPavel Shilovsky1-8/+14
that is essential for CIFS/SMB/SMB2 oplock breaks and SMB2 echos. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-21CIFS: Make wait_for_free_request killablePavel Shilovsky1-1/+6
to let us kill the proccess if it hangs waiting for a credit when the session is down and echo is disabled. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-21CIFS: Introduce credit-based flow controlPavel Shilovsky1-24/+20
and send no more than credits value requests at once. For SMB/CIFS it's trivial: increment this value by receiving any message and decrement by sending one. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-21CIFS: Simplify inFlight logicPavel Shilovsky1-22/+23
by making it as unsigned integer and surround access with req_lock from server structure. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-20CIFS: Respect negotiated MaxMpxCountPavel Shilovsky1-2/+2
Some servers sets this value less than 50 that was hardcoded and we lost the connection if when we exceed this limit. Fix this by respecting this value - not sending more than the server allows. Cc: stable@kernel.org Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <stevef@smf-gateway.(none)>
2011-10-19cifs, freezer: add wait_event_freezekillable and have cifs use itJeff Layton1-1/+2
CIFS currently uses wait_event_killable to put tasks to sleep while they await replies from the server. That function though does not allow the freezer to run. In many cases, the network interface may be going down anyway, in which case the reply will never come. The client then ends up blocking the computer from suspending. Fix this by adding a new wait_event_freezable variant -- wait_event_freezekillable. The idea is to combine the behavior of wait_event_killable and wait_event_freezable -- put the task to sleep and only allow it to be awoken by fatal signals, but also allow the freezer to do its job. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2011-10-19cifs: add a callback function to receive the rest of the frameJeff Layton1-2/+3
In order to handle larger SMBs for readpages and other calls, we want to be able to read into a preallocated set of buffers. Rather than changing all of the existing code to preallocate buffers however, we instead add a receive callback function to the MID. cifsd will call this function once the mid_q_entry has been identified in order to receive the rest of the SMB. If the mid can't be identified or the receive pointer is unset, then the standard 3rd phase receive function will be called. Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2011-10-12cifs: consolidate signature generating codeJeff Layton1-3/+8
We have two versions of signature generating code. A vectorized and non-vectorized version. Eliminate a large chunk of cut-and-paste code by turning the non-vectorized version into a wrapper around the vectorized one. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-08-11[CIFS] Cleanup use of CONFIG_CIFS_STATS2 ifdef to make transport routines ↵Steve French1-34/+17
more readable Christoph had requested that the stats related code (in CONFIG_CIFS_STATS2) be moved into helpers to make code flow more readable. This patch should help. For example the following section from transport.c spin_unlock(&GlobalMid_Lock); atomic_inc(&ses->server->num_waiters); wait_event(ses->server->request_q, atomic_read(&ses->server->inFlight) < cifs_max_pending); atomic_dec(&ses->server->num_waiters); spin_lock(&GlobalMid_Lock); becomes simpler (with the patch below): spin_unlock(&GlobalMid_Lock); cifs_num_waiters_inc(server); wait_event(server->request_q, atomic_read(&server->inFlight) < cifs_max_pending); cifs_num_waiters_dec(server); spin_lock(&GlobalMid_Lock); Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Christoph Hellwig <hch@infradead.org> Signed-off-by: Steve French <sfrench@us.ibm.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
2011-08-03CIFS: Fix missing a decrement of inFlight valuePavel Shilovsky1-0/+2
if we failed on getting mid entry in cifs_call_async. Cc: stable@kernel.org Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-27[CIFS] Rename three structures to avoid camel caseSteve French1-10/+10
secMode to sec_mode and cifsTconInfo to cifs_tcon and cifsSesInfo to cifs_ses Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-24cifs: don't call mid_q_entry->callback under the Global_MidLock (try #5)Jeff Layton1-15/+8
Minor revision to the last version of this patch -- the only difference is the fix to the cFYI statement in cifs_reconnect. Holding the spinlock while we call this function means that it can't sleep, which really limits what it can do. Taking it out from under the spinlock also means less contention for this global lock. Change the semantics such that the Global_MidLock is not held when the callback is called. To do this requires that we take extra care not to have sync_mid_result remove the mid from the list when the mid is in a state where that has already happened. This prevents list corruption when the mid is sitting on a private list for reconnect or when cifsd is coming down. Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-23cifs: add ignore_pend flag to cifs_call_asyncJeff Layton1-2/+3
The current code always ignores the max_pending limit. Have it instead only optionally ignore the pending limit. For CIFSSMBEcho, we need to ignore it to make sure they always can go out. For async reads, writes and potentially other calls, we need to respect it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-23cifs: make cifs_send_async take a kvec arrayJeff Layton1-6/+7
We'll need this for async writes, so convert the call to take a kvec array. CIFSSMBEcho is changed to put a kvec on the stack and pass in the SMB buffer using that. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-23cifs: consolidate SendReceive response checksJeff Layton1-116/+41
Further consolidate the SendReceive code by moving the checks run over the packet into a separate function that all the SendReceive variants can call. We can also eliminate the check for a receive_len that's too big or too small. cifs_demultiplex_thread already checks that and disconnects the socket if that occurs, while setting the midStatus to MALFORMED. It'll never call this code if that's the case. Finally do a little cleanup. Use "goto out" on errors so that the flow of code in the normal case is more evident. Also switch the logErr variable in map_smb_to_linux_error to a bool. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 23:31:02 +0000