summaryrefslogtreecommitdiffstats
path: root/fs/cifs/smb2misc.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-16CIFS: keep FileInfo handle live during oplock breakAurelien Aptel1-3/+3
In the oplock break handler, writing pending changes from pages puts the FileInfo handle. If the refcount reaches zero it closes the handle and waits for any oplock break handler to return, thus causing a deadlock. To prevent this situation: * We add a wait flag to cifsFileInfo_put() to decide whether we should wait for running/pending oplock break handlers * We keep an additionnal reference of the SMB FileInfo handle so that for the rest of the handler putting the handle won't close it. - The ref is bumped everytime we queue the handler via the cifs_queue_oplock_break() helper. - The ref is decremented at the end of the handler This bug was triggered by xfstest 464. Also important fix to address the various reports of oops in smb2_push_mandatory_locks Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-03-04CIFS: Do not reset lease state to NONE on lease breakPavel Shilovsky1-3/+14
Currently on lease break the client sets a caching level twice: when oplock is detected and when oplock is processed. While the 1st attempt sets the level to the value provided by the server, the 2nd one resets the level to None unconditionally. This happens because the oplock/lease processing code was changed to avoid races between page cache flushes and oplock breaks. The commit c11f1df5003d534 ("cifs: Wait for writebacks to complete before attempting write.") fixed the races for oplocks but didn't apply the same changes for leases resulting in overwriting the server granted value to None. Fix this by properly processing lease breaks. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-03-04cifs: add credits from unmatched responses/messagesRonnie Sahlberg1-7/+0
We should add any credits granted to us from unmatched server responses. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-01-24smb3: add credits we receive from oplock/break PDUsRonnie Sahlberg1-0/+7
Otherwise we gradually leak credits leading to potential hung session. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-09-02smb3: minor debugging clarifications in rfc1001 len processingSteve French1-5/+9
I ran into some cases where server was returning the wrong length on frames but I couldn't easily match them to the command in the network trace (or server logs) since I need the command and/or multiplex id to find the offending SMB2/SMB3 command. Add these two fields to the log message. In the case of padding too much it may not be a problem in all cases but might have correlated to a network disconnect case in some problems we have been looking at. In the case of frame too short is even more important. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-08-23cifs: check if SMB2 PDU size has been padded and suppress the warningRonnie Sahlberg1-0/+7
Some SMB2/3 servers, Win2016 but possibly others too, adds padding not only between PDUs in a compound but also to the final PDU. This padding extends the PDU to a multiple of 8 bytes. Check if the unexpected length looks like this might be the case and avoid triggering the log messages for : "SMB2 server sent bad RFC1001 len %d not %d\n" Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-07smb3: simplify code by removing CONFIG_CIFS_SMB311Steve French1-10/+3
We really, really want to be encouraging use of secure dialects, and SMB3.1.1 offers useful security features, and will soon be the recommended dialect for many use cases. Simplify the code by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable it in the build, and create compatibility and/or security issues with modern servers - many of which have been supporting this dialect for multiple years. Also clarify some of the Kconfig text for cifs.ko about SMB3.1.1 and current supported features in the module. Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-06-15smb3: fix corrupt path in subdirs on smb311 with posixSteve French1-1/+2
Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-15cifs: add lease tracking to the cached root fidRonnie Sahlberg1-1/+15
Use a read lease for the cached root fid so that we can detect when the content of the directory changes (via a break) at which time we close the handle. On next access to the root the handle will be reopened and cached again. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-07CIFS: Fix NULL ptr derefAurelien Aptel1-1/+3
cifs->master_tlink is NULL against Win Server 2016 (which is strange.. not sure why) and is dereferenced in cifs_sb_master_tcon(). move master_tlink getter to cifsglob.h so it can be used from smb2misc.c Signed-off-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-06-02cifs: update multiplex loop to handle compounded responsesRonnie Sahlberg1-0/+1
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-06-01cifs: remove header_preamble_size where it is always 0Ronnie Sahlberg1-16/+12
Since header_preamble_size is 0 for SMB2+ we can remove it in those code paths that are only invoked from SMB2. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-01cifs: remove struct smb2_hdrRonnie Sahlberg1-1/+1
struct smb2_hdr is now just a wrapper for smb2_sync_hdr. We can thus get rid of smb2_hdr completely and access the sync header directly. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: change smb2_get_data_area_len to take a smb2_sync_hdr as argumentRonnie Sahlberg1-18/+19
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: update smb2_calc_size to use smb2_sync_hdr instead of smb2_hdrRonnie Sahlberg1-6/+4
smb2_hdr is just a wrapper around smb2_sync_hdr at this stage and smb2_hdr is going away. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: remove struct smb2_oplock_break_rspRonnie Sahlberg1-2/+2
The two structures smb2_oplock_breaq_req/rsp are now basically identical. Replace this with a single definition of a smb2_oplock_break structure. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31smb3: Add posix create context for smb3.11 posix mountsSteve French1-0/+6
Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30cifs: update smb2_check_message to handle PDUs without a 4 byte length headerRonnie Sahlberg1-30/+20
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-27cifs: update calc_size to take a server argumentRonnie Sahlberg1-7/+7
and change the smb2 version to take heder_preamble_size into account instead of hardcoding it as 4 bytes. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-04-12smb3.11: replace a 4 with server->vals->header_preamble_sizeSteve French1-4/+7
More cleanup of use of hardcoded 4 byte RFC1001 field size Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-04-12SMB3: Fix length checking of SMB3.11 negotiate requestSteve French1-0/+39
The length checking for SMB3.11 negotiate request includes "negotiate contexts" which caused a buffer validation problem and a confusing warning message on SMB3.11 mount e.g.: SMB2 server sent bad RFC1001 len 236 not 170 Fix the length checking for SMB3.11 negotiate to account for the new negotiate context so that we don't log a warning on SMB3.11 mount by default but do log warnings if lengths returned by the server are incorrect. CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-02cifs: fix sparse warning on previous patch in a few printksSteve French1-3/+3
Signed-off-by: Steve French <smfrench@gmail.com> CC: Ronnie Sahlberg <lsahlber@redhat.com>
2018-04-02cifs: add server->vals->header_preamble_sizeRonnie Sahlberg1-9/+10
This variable is set to 4 for all protocol versions and replaces the hardcoded constant 4 throughought the code. This will later be updated to reflect whether a response packet has a 4 byte length preamble or not once we start removing this field from the SMB2+ dialects. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-01CIFS: implement v3.11 preauth integrityAurelien Aptel1-0/+64
SMB3.11 clients must implement pre-authentification integrity. * new mechanism to certify requests/responses happening before Tree Connect. * supersedes VALIDATE_NEGOTIATE * fixes signing for SMB3.11 Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-24cifs: remove rfc1002 header from smb2_oplock_break we get from serverRonnie Sahlberg1-1/+1
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2017-05-03CIFS: fix oplock break deadlocksRabin Vincent1-2/+3
When the final cifsFileInfo_put() is called from cifsiod and an oplock break work is queued, lockdep complains loudly: ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #21 Not tainted --------------------------------------------- kworker/0:2/78 is trying to acquire lock: ("cifsiod"){++++.+}, at: flush_work+0x215/0x350 but task is already holding lock: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock("cifsiod"); lock("cifsiod"); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by kworker/0:2/78: #0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 #1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0 stack backtrace: CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21 Workqueue: cifsiod cifs_writev_complete Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? match_held_lock+0x20/0x2b0 ? trace_hardirqs_off_caller+0x86/0x130 ? mark_lock+0xa6/0x920 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? flush_work+0x215/0x350 flush_work+0x236/0x350 ? flush_work+0x215/0x350 ? destroy_worker+0x170/0x170 __cancel_work_timer+0x17d/0x210 ? ___preempt_schedule+0x16/0x18 cancel_work_sync+0x10/0x20 cifsFileInfo_put+0x338/0x7f0 cifs_writedata_release+0x2a/0x40 ? cifs_writedata_release+0x2a/0x40 cifs_writev_complete+0x29d/0x850 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 This is a real warning. Since the oplock is queued on the same workqueue this can deadlock if there is only one worker thread active for the workqueue (which will be the case during memory pressure when the rescuer thread is handling it). Furthermore, there is at least one other kind of hang possible due to the oplock break handling if there is only worker. (This can be reproduced without introducing memory pressure by having passing 1 for the max_active parameter of cifsiod.) cifs_oplock_break() can wait indefintely in the filemap_fdatawait() while the cifs_writev_complete() work is blocked: sysrq: SysRq : Show Blocked State task PC stack pid father kworker/0:1 D 0 16 2 0x00000000 Workqueue: cifsiod cifs_oplock_break Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x4a/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 cifs_oplock_break+0x651/0x710 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 dd D 0 683 171 0x00000000 Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x29/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 filemap_write_and_wait+0x4e/0x70 cifs_flush+0x6a/0xb0 filp_close+0x52/0xa0 __close_fd+0xdc/0x150 SyS_close+0x33/0x60 entry_SYSCALL_64_fastpath+0x1f/0xbe Showing all locks held in the system: 2 locks held by kworker/0:1/16: #0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0 #1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0 Showing busy workqueues and worker pools: workqueue cifsiod: flags=0xc pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1 in-flight: 16:cifs_oplock_break delayed: cifs_writev_complete, cifs_echo_request pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3 Fix these problems by creating a a new workqueue (with a rescuer) for the oplock break work. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org>
2017-04-07Handle mismatched open callsSachin Prabhu1-0/+46
A signal can interrupt a SendReceive call which result in incoming responses to the call being ignored. This is a problem for calls such as open which results in the successful response being ignored. This results in an open file resource on the server. The patch looks into responses which were cancelled after being sent and in case of successful open closes the open fids. For this patch, the check is only done in SendReceive2() RH-bz: 1403319 Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Cc: Stable <stable@vger.kernel.org>
2017-02-01CIFS: Separate SMB2 header structurePavel Shilovsky1-28/+33
In order to support compounding and encryption we need to separate RFC1001 length field and SMB2 header structure because the protocol treats them differently. This change will allow to simplify parsing of such complex SMB2 packets further. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-10-12Clarify locking of cifs file and tcon structures and make more granularSteve French1-8/+8
Remove the global file_list_lock to simplify cifs/smb3 locking and have spinlocks that more closely match the information they are protecting. Add new tcon->open_file_lock and file->file_info_lock spinlocks. Locks continue to follow a heirachy, cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file where global tcp_ses_lock still protects socket and cifs_ses, while the the newer locks protect the lower level structure's information (tcon and cifs_file respectively). CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <steve.french@primarydata.com> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Germano Percossi <germano.percossi@citrix.com>
2016-01-14Prepare for encryption support (first part). Add decryption and encryption ↵Steve French1-6/+30
key generation. Thanks to Metze for helping with this. Reviewed-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <steve.french@primarydata.com>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells1-2/+2
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-01Fix coverity warningSteve French1-1/+1
Coverity reports a warning for referencing the beginning of the SMB2/SMB3 frame using the ProtocolId field as an array. Although it works the same either way, this patch should quiet the warning and might be a little clearer. Reported by Coverity (CID 741269) Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
2014-12-14Convert MessageID in smb2_hdr to LESachin Prabhu1-5/+7
We have encountered failures when When testing smb2 mounts on ppc64 machines when using both Samba as well as Windows 2012. On poking around, the problem was determined to be caused by the high endian MessageID passed in the header for smb2. On checking the corresponding MID for smb1 is converted to LE before being sent on the wire. We have tested this patch successfully on a ppc64 machine. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
2014-12-10fs/cifs: remove obsolete __constantFabian Frederick1-19/+19
Replace all __constant_foo to foo() except in smb2status.h (1700 lines to update). Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steve French <sfrench@samba.org> Cc: Jeff Layton <jlayton@poochiereds.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-16Allow conversion of characters in Mac remap range (part 2)Steve French1-3/+9
The previous patch allowed remapping reserved characters from directory listenings, this patch adds conversion the other direction, allowing opening of files with any of the seven reserved characters. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
2014-08-15[CIFS] Workaround MacOS server problem with SMB2.1 writeSteve French1-1/+16
response Writes fail to Mac servers with SMB2.1 mounts (works with cifs though) due to them sending an incorrect RFC1001 length for the SMB2.1 Write response. Workaround this problem. MacOS server sends a write response with 3 bytes of pad beyond the end of the SMB itself. The RFC1001 length is 3 bytes more than the sum of the SMB2.1 header length + the write reponse. Incorporate feedback from Jeff and JRA to allow servers to send a tcp frame that is even more than three bytes too long (ie much longer than the SMB2/SMB3 request that it contains) but we do log it once now. In the earlier version of the patch I had limited how far off the length field could be before we fail the request. Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-02[CIFS] Fix incorrect hex vs. decimal in some debug print statementsSteve French1-3/+3
Joe Perches and Hans Wennborg noticed that various places in the kernel were printing decimal numbers with 0x prefix. printk("0x%d") or equivalent This fixes the instances of this in the cifs driver. CC: Hans Wennborg <hans@hanshq.net> CC: Joe Perches <joe@perches.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-16cifs: Wait for writebacks to complete before attempting write.Sachin Prabhu1-3/+15
Problem reported in Red Hat bz 1040329 for strict writes where we cache only when we hold oplock and write direct to the server when we don't. When we receive an oplock break, we first change the oplock value for the inode in cifsInodeInfo->oplock to indicate that we no longer hold the oplock before we enqueue a task to flush changes to the backing device. Once we have completed flushing the changes, we return the oplock to the server. There are 2 ways here where we can have data corruption 1) While we flush changes to the backing device as part of the oplock break, we can have processes write to the file. These writes check for the oplock, find none and attempt to write directly to the server. These direct writes made while we are flushing from cache could be overwritten by data being flushed from the cache causing data corruption. 2) While a thread runs in cifs_strict_writev, the machine could receive and process an oplock break after the thread has checked the oplock and found that it allows us to cache and before we have made changes to the cache. In that case, we end up with a dirty page in cache when we shouldn't have any. This will be flushed later and will overwrite all subsequent writes to the part of the file represented by this page. Before making any writes to the server, we need to confirm that we are not in the process of flushing data to the server and if we are, we should wait until the process is complete before we attempt the write. We should also wait for existing writes to complete before we process an oplock break request which changes oplock values. We add a version specific downgrade_oplock() operation to allow for differences in the oplock values set for the different smb versions. Cc: stable@vger.kernel.org Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Respect epoch value from create lease context v2Pavel Shilovsky1-2/+4
that force a client to purge cache pages when a server requests it. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Store lease state itself rather than a mapped oplock valuePavel Shilovsky1-19/+11
and separate smb20_operations struct. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Replace clientCanCache* bools with an integerPavel Shilovsky1-3/+3
that prepare the code to handle different types of SMB2 leases. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Fix missing lease breakPavel Shilovsky1-69/+80
If a server sends a lease break to a connection that doesn't have opens with a lease key specified in the server response, we can't find an open file to send an ack. Fix this by walking through all connections we have. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Fix a memory leak when a lease break comesPavel Shilovsky1-0/+1
This happens when we receive a lease break from a server, then find an appropriate lease key in opened files and schedule the oplock_break slow work. lw pointer isn't freed in this case. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Implement follow_link for SMB2Pavel Shilovsky1-0/+4
that allows to access files through symlink created on a server. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-26SMB2 FSCTL and IOCTL worker functionSteve French1-0/+4
This worker function is needed to send SMB2 fsctl (and ioctl) requests including: validating negotiation info (secure negotiate) querying the servers network interfaces copy offload (refcopy) Followon patches for the above three will use this. This patch also does general validation of the response. In the future, as David Disseldorp notes, for the copychunk ioctl case, we will want to enhance the response processing to allow returning the chunk request limits to the caller (even though the server returns an error, in that case we would return data that the caller could use - see 2.2.32.1). See MS-SMB2 Section 2.2.31 for more details on format of fsctl. Acked-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04[CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches1-48/+48
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24Trivial endian fixesSteve French1-2/+3
Some trivial endian fixes for the SMB2 code. One warning remains which I asked Pavel to look at. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Fix fast lease break after open problemPavel Shilovsky1-5/+69
Now we walk though cifsFileInfo's list for every incoming lease break and look for an equivalent there. That approach misses lease breaks that come just after an open response - we don't have time to populate new cifsFileInfo structure to the list. Fix this by adding new list of pending opens and look for a lease there if we didn't find it in the list of cifsFileInfo structures. Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24CIFS: Add SMB2.1 lease break supportPavel Shilovsky1-1/+89
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24CIFS: Add oplock break support for SMB2Pavel Shilovsky1-2/+74
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 11:18:11 +0000