summaryrefslogtreecommitdiffstats
path: root/fs/ceph/mds_client.c
AgeCommit message (Collapse)AuthorFilesLines
2021-09-02ceph: drop the mdsc_get_session/put_session dout messagesJeff Layton1-9/+2
These are very chatty, racy, and not terribly useful. Just remove them. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: don't WARN if we're forcibly removing the session capsXiubo Li1-1/+1
For example in the case of a forced umount, we'll remove all the session caps even if they are dirty. Move the warning to a wrapper function and make most of the callers use it. Call the core function when removing caps due to a forced umount. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: don't WARN if we're force umountingXiubo Li1-2/+5
Force umount will try to close the sessions by setting the session state to _CLOSING. We don't want to WARN in this situation, since it's expected. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: remove the capsnaps when removing capsXiubo Li1-1/+30
capsnaps will take inode references via ihold when queueing to flush. When force unmounting, the client will just close the sessions and may never get a flush reply, causing a leak and inode ref leak. Fix this by removing the capsnaps for an inode when removing the caps. URL: https://tracker.ceph.com/issues/52295 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: reconnect to the export targets on new mdsmapsXiubo Li1-1/+56
In the case where the export MDS has crashed just after the EImportStart journal is flushed, a standby MDS takes over for it and when replaying the EImportStart journal the MDS will wait the client to reconnect. That may never happen because the client may not have registered or opened the sessions yet. When receiving a new map, ensure we reconnect to valid export targets as well if their sessions don't exist yet. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: remove redundant initializations from mdsc and sessionJeff Layton1-19/+0
The ceph_mds_client and ceph_mds_session structures are kzalloc'ed so there's no need to explicitly initialize either of their fields to 0. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: cancel delayed work instead of flushing on mdsc teardownJeff Layton1-1/+0
The first thing metric_delayed_work does is check mdsc->stopping, and then return immediately if it's set. That's good since we would have already torn down the metric structures at this point, otherwise, but there is no locking around mdsc->stopping. It's possible that the ceph_metric_destroy call could race with the delayed_work, in which case we could end up with the delayed_work accessing destroyed percpu variables. At this point in the mdsc teardown, the "stopping" flag has already been set, so there's no benefit to flushing the work. Move the work cancellation in ceph_metric_destroy ahead of the percpu variable destruction, and eliminate the flush_delayed_work call in ceph_mdsc_destroy. Fixes: 18f473b384a6 ("ceph: periodically send perf metrics to MDSes") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: flush mdlog before umountingXiubo Li1-0/+25
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: make iterate_sessions a global symbolXiubo Li1-17/+32
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: make ceph_create_session_msg a global symbolXiubo Li1-7/+9
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-25ceph: correctly handle releasing an embedded cap flushXiubo Li1-3/+4
The ceph_cap_flush structures are usually dynamically allocated, but the ceph_cap_snap has an embedded one. When force umounting, the client will try to remove all the session caps. During this, it will free them, but that should not be done with the ones embedded in a capsnap. Fix this by adding a new boolean that indicates that the cap flush is embedded in a capsnap, and skip freeing it if that's set. At the same time, switch to using list_del_init() when detaching the i_list and g_list heads. It's possible for a forced umount to remove these objects but then handle_cap_flushsnap_ack() races in and does the list_del_init() again, corrupting memory. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/52283 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-04ceph: reduce contention in ceph_check_delayed_caps()Luis Henriques1-9/+16
Function ceph_check_delayed_caps() is called from the mdsc->delayed_work workqueue and it can be kept looping for quite some time if caps keep being added back to the mdsc->cap_delay_list. This may result in the watchdog tainting the kernel with the softlockup flag. This patch breaks this loop if the caps have been recently (i.e. during the loop execution). Any new caps added to the list will be handled in the next run. Also, allow schedule_delayed() callers to explicitly set the delay value instead of defaulting to 5s, so we can ensure that it runs soon afterward if it looks like there is more work. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/46284 Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-07-20ceph: don't WARN if we're still opening a session to an MDSLuis Henriques1-1/+1
If MDSs aren't available while mounting a filesystem, the session state will transition from SESSION_OPENING to SESSION_CLOSING. And in that scenario check_session_state() will be called from delayed_work() and trigger this WARN. Avoid this by only WARNing after a session has already been established (i.e., the s_ttl will be different from 0). Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq") Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: take reference to req->r_parent at point of assignmentJeff Layton1-1/+0
Currently, we set the r_parent pointer but then don't take a reference to it until we submit the request. If we end up freeing the req before that point, then we'll do a iput when we shouldn't. Instead, take the inode reference in the callers, so that it's always safe to call ceph_mdsc_put_request on the req, even before submission. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: eliminate ceph_async_iput()Jeff Layton1-19/+11
Now that we don't need to hold session->s_mutex or the snap_rwsem when calling ceph_check_caps, we can eliminate ceph_async_iput and just use normal iput calls. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: eliminate session->s_gen_ttl_lockJeff Layton1-11/+6
Turn s_cap_gen field into an atomic_t, and just rely on the fact that we hold the s_mutex when changing the s_cap_ttl field. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: allow ceph_put_mds_session to take NULL or ERR_PTRJeff Layton1-2/+4
...to simplify some error paths. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-27ceph: don't allow access to MDS-private inodesJeff Layton1-0/+7
The MDS reserves a set of inodes for its own usage, and these should never be accessible to clients. Add a new helper to vet a proposed inode number against that range, and complain loudly and refuse to create or look it up if it's in it. Also, ensure that the MDS doesn't try to delegate inodes that are in that range or lower. Print a warning if it does, and don't save the range in the xarray. URL: https://tracker.ceph.com/issues/49922 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-27ceph: fix up some bare fetches of i_sizeJeff Layton1-1/+1
We need to use i_size_read(), which properly handles the torn read case on 32-bit arches. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-27ceph: support getting ceph.dir.rsnaps vxattrYanhu Cao1-1/+8
Add support for grabbing the rsnaps value out of the inode info in traces, and exposing that via ceph.dir.rsnaps xattr. Signed-off-by: Yanhu Cao <gmayyyha@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-27ceph: rename the metric helpersXiubo Li1-1/+1
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-01-04libceph, ceph: disambiguate ceph_connection_operations handlersIlya Dryomov1-17/+17
Since a few years, kernel addresses are no longer included in oops dumps, at least on x86. All we get is a symbol name with offset and size. This is a problem for ceph_connection_operations handlers, especially con->ops->dispatch(). All three handlers have the same name and there is little context to disambiguate between e.g. monitor and OSD clients because almost everything is inlined. gdb sneakily stops at the first matching symbol, so one has to resort to nm and addr2line. Some of these are already prefixed with mon_, osd_ or mds_. Let's do the same for all others. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org>
2020-12-28ceph: reencode gid_list when reconnectingIlya Dryomov1-31/+22
On reconnect, cap and dentry releases are dropped and the fields that follow must be reencoded into the freed space. Currently these are timestamp and gid_list, but gid_list isn't reencoded. This results in failed to decode message of type 24 v4: End of buffer errors on the MDS. While at it, make a change to encode gid_list unconditionally, without regard to what head/which version was used as a result of checking whether CEPH_FEATURE_FS_BTIME is supported or not. URL: https://tracker.ceph.com/issues/48618 Fixes: 4f1ddb1ea874 ("ceph: implement updated ceph_mds_request_head structure") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-12-14libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1Ilya Dryomov1-16/+5
This shouldn't cause any functional changes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: implement msgr2.1 protocol (crc and secure modes)Ilya Dryomov1-1/+79
Implement msgr2.1 wire protocol, available since nautilus 14.2.11 and octopus 15.2.5. msgr2.0 wire protocol is not implemented -- it has several security, integrity and robustness issues and therefore considered deprecated. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: get and handle cluster maps with addrvecsIlya Dryomov1-1/+1
In preparation for msgr2, make the cluster send us maps with addrvecs including both LEGACY and MSGR2 addrs instead of a single LEGACY addr. This means advertising support for SERVER_NAUTILUS and also some older features: SERVER_MIMIC, MONENC and MONNAMES. MONNAMES and MONENC are actually pre-argonaut, we just never updated ceph_monmap_decode() for them. Decoding is unconditional, see commit 23c625ce3065 ("libceph: assume argonaut on the server side"). SERVER_MIMIC doesn't bear any meaning for the kernel client. Since ceph_decode_entity_addrvec() is guarded by encoding version checks (and in msgr2 case it is guarded implicitly by the fact that server is speaking msgr2), we assume MSG_ADDR2 for it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14libceph, ceph: incorporate nautilus cephx changesIlya Dryomov1-1/+4
- request service tickets together with auth ticket. Currently we get auth ticket via CEPHX_GET_AUTH_SESSION_KEY op and then request service tickets via CEPHX_GET_PRINCIPAL_SESSION_KEY op in a separate message. Since nautilus, desired service tickets are shared togther with auth ticket in CEPHX_GET_AUTH_SESSION_KEY reply. - propagate session key and connection secret, if any. In preparation for msgr2, update handle_reply() and verify_authorizer_reply() auth ops to propagate session key and connection secret. Since nautilus, if secure mode is negotiated, connection secret is shared either in CEPHX_GET_AUTH_SESSION_KEY reply (for mons) or in a final authorizer reply (for osds and mdses). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: implement updated ceph_mds_request_head structureJeff Layton1-13/+62
When we added the btime feature in mainline ceph, we had to extend struct ceph_mds_request_args so that it could be set. Implement the same in the kernel client. Rename ceph_mds_request_head with a _old extension, and a union ceph_mds_request_args_ext to allow for the extended size of the new header format. Add the appropriate code to handle both formats in struct create_request_message and key the behavior on whether the peer supports CEPH_FEATURE_FS_BTIME. The gid_list field in the payload is now populated from the saved credential. For now, we don't add any support for setting the btime via setattr, but this does enable us to add that in the future. [ idryomov: break unnecessarily long lines ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: clean up argument lists to __prepare_send_request and __send_requestJeff Layton1-9/+9
We can always get the mdsc from the session, so there's no need to pass it in as a separate argument. Pass the session to __prepare_send_request as well, to prepare for later patches that will need to access it. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: take a cred reference instead of tracking individual uid/gidJeff Layton1-4/+6
Replace req->r_uid/r_gid with an r_cred pointer and take a reference to that at the point where we previously would sample the two. Use that to populate the uid and gid in the header and release the reference when the request is freed. This should enable us to later add support for sending supplementary group lists in MDS requests. [ idryomov: break unnecessarily long lines ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: set osdmap epoch for setxattrXiubo Li1-1/+1
When setting the file/dir layout, it may need data pool info. So in mds server, it needs to check the osdmap. At present, if mds doesn't find the data pool specified, it will try to get the latest osdmap. Now if pass the osd epoch for setxattr, the mds server can only check this epoch of osdmap. URL: https://tracker.ceph.com/issues/48504 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: remove redundant assignment to variable iColin Ian King1-1/+1
The variable i is being initialized with a value that is never read and it is being updated later with a new value in a for-loop. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: when filling trace, call ceph_get_inode outside of mutexesJeff Layton1-0/+17
Geng Jichao reported a rather complex deadlock involving several moving parts: 1) readahead is issued against an inode and some of its pages are locked while the read is in flight 2) the same inode is evicted from the cache, and this task gets stuck waiting for the page lock because of the above readahead 3) another task is processing a reply trace, and looks up the inode being evicted while holding the s_mutex. That ends up waiting for the eviction to complete 4) a write reply for an unrelated inode is then processed in the ceph_con_workfn job. It calls ceph_check_caps after putting wrbuffer caps, and that gets stuck waiting on the s_mutex held by 3. The reply to "1" is stuck behind the write reply in "4", so we deadlock at that point. This patch changes the trace processing to call ceph_get_inode outside of the s_mutex and snap_rwsem, which should break the cycle above. [ idryomov: break unnecessarily long lines ] URL: https://tracker.ceph.com/issues/47998 Reported-by: Geng Jichao <gengjichao@jd.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: fix up some warnings on W=1 buildsJeff Layton1-19/+6
Convert some decodes into unused variables into skips, and fix up some non-kerneldoc comment headers to not start with "/**". Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: queue MDS requests to REJECTED sessions when CLEANRECOVER is setJeff Layton1-4/+14
Ilya noticed that the first access to a blacklisted mount would often get back -EACCES, but then subsequent calls would be OK. The problem is in __do_request. If the session is marked as REJECTED, a hard error is returned instead of waiting for a new session to come into being. When the session is REJECTED and the mount was done with recover_session=clean, queue the request to the waiting_for_map queue, which will be awoken after tearing down the old session. We can only do this for sync requests though, so check for async ones first and just let the callers redrive a sync request. URL: https://tracker.ceph.com/issues/47385 Reported-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: remove timeout on allowing reconnect after blocklistingJeff Layton1-5/+0
30 minutes is a long time to wait, and this makes it difficult to test the feature by manually blocklisting clients. Remove the timeout infrastructure and just allow the client to reconnect at will. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-14ceph: add new RECOVER mount_state when recovering sessionJeff Layton1-2/+2
When recovering a session (a'la recover_session=clean), we want to do all of the operations that we do on a forced umount, but changing the mount state to SHUTDOWN is can cause queued MDS requests to fail when the session comes back. Most of those can idle until the session is recovered in this situation. Reserve SHUTDOWN state for forced umount, and make a new RECOVER state for the forced reconnect situation. Change several tests for equality with SHUTDOWN to test for that or RECOVER. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-11-04ceph: check session state after bumping session->s_seqJeff Layton1-15/+35
Some messages sent by the MDS entail a session sequence number increment, and the MDS will drop certain types of requests on the floor when the sequence numbers don't match. In particular, a REQUEST_CLOSE message can cross with one of the sequence morphing messages from the MDS which can cause the client to stall, waiting for a response that will never come. Originally, this meant an up to 5s delay before the recurring workqueue job kicked in and resent the request, but a recent change made it so that the client would never resend, causing a 60s stall unmounting and sometimes a blockisting event. Add a new helper for incrementing the session sequence and then testing to see whether a REQUEST_CLOSE needs to be resent, and move the handling of CEPH_MDS_SESSION_CLOSING into that function. Change all of the bare sequence counter increments to use the new helper. Reorganize check_session_state with a switch statement. It should no longer be called when the session is CLOSING, so throw a warning if it ever is (but still handle that case sanely). [ idryomov: whitespace, pr_err() call fixup ] URL: https://tracker.ceph.com/issues/47563 Fixes: fa9967734227 ("ceph: fix potential mdsc use-after-free crash") Reported-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: add a note explaining session reject error stringIlya Dryomov1-0/+4
error_string key in the metadata map of MClientSession message is intended for humans, but unfortunately became part of the on-wire format with the introduction of recover_session=clean mode in commit 131d7eb4faa1 ("ceph: auto reconnect after blacklisted"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph, rbd, ceph: "blacklist" -> "blocklist"Ilya Dryomov1-8/+8
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: encode inodes' parent/d_name in cap reconnect messageYan, Zheng1-28/+61
Since nautilus, MDS tracks dirfrags whose child inodes have caps in open file table. When MDS recovers, it prefetches all of these dirfrags. This avoids using backtrace to load inodes. But dirfrags prefetch may load lots of useless inodes into cache, and make MDS run out of memory. Recent MDS adds an option that disables dirfrags prefetch. When dirfrags prefetch is disabled. Recovering MDS only prefetches corresponding dir inodes. Including inodes' parent/d_name in cap reconnect message can help MDS to load inodes into its cache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-05ceph: handle zero-length feature mask in session messagesJeff Layton1-2/+4
Most session messages contain a feature mask, but the MDS will routinely send a REJECT message with one that is zero-length. Commit 0fa8263367db ("ceph: fix endianness bug when handling MDS session feature bits") fixed the decoding of the feature mask, but failed to account for the MDS sending a zero-length feature mask. This causes REJECT message decoding to fail. Skip trying to decode a feature mask if the word count is zero. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/46823 Fixes: 0fa8263367db ("ceph: fix endianness bug when handling MDS session feature bits") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-04ceph: use frag's MDS in either modeYanhu Cao1-2/+1
When doing some tests with multiple mds, we were seeing many mds forwarding requests between them, causing clients to resend. If the request is a modification operation and the mode is set to USE_AUTH_MDS, then the auth mds should be selected to handle the request. If auth mds for frag is already set, then it should be returned directly without further processing. The current logic is wrong because it only returns directly if mode is USE_AUTH_MDS, but we want to do that for all modes. If we don't, then when the frag's mds is not equal to cap session's mds, the request will get sent to the wrong MDS needlessly. Drop the mode check in this condition. Signed-off-by: Yanhu Cao <gmayyyha@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: fix use-after-free for fsc->mdscXiubo Li1-1/+2
If the ceph_mdsc_init() fails, it will free the mdsc already. Reported-by: syzbot+b57f46d8d6ea51960b8c@syzkaller.appspotmail.com Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: send client provided metric flags in client metadataXiubo Li1-2/+58
Send metric flags to the MDS, indicating what metrics the client supports. Currently that consists of cap statistics, and read, write and metadata latencies. URL: https://tracker.ceph.com/issues/43435 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: periodically send perf metrics to MDSesXiubo Li1-0/+3
This will send the caps/read/write/metadata metrics to any available MDS once per second, which will be the same as the userland client. It will skip the MDS sessions which don't support the metric collection, as the MDSs will close socket connections when they get an unknown type message. We can disable the metric sending via the disable_send_metrics module parameter. [ jlayton: fix up endianness bug in ceph_mdsc_send_metrics() ] URL: https://tracker.ceph.com/issues/43215 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: check the sesion state and return false in case it is closedXiubo Li1-0/+1
If the session is already in closed state, we should skip it. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: fix potential mdsc use-after-free crashXiubo Li1-1/+13
Make sure the delayed work stopped before releasing the resources. cancel_delayed_work_sync() will only guarantee that the work finishes executing if the work is already in the ->worklist. That means after the cancel_delayed_work_sync() returns, it will leave the work requeued if it was rearmed at the end. That can lead to a use after free once the work struct is freed. Fix it by flushing the delayed work instead of trying to cancel it, and ensure that the work doesn't rearm if the mdsc is stopping. URL: https://tracker.ceph.com/issues/46293 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: switch to WARN_ON_ONCE in encode_supported_features()Xiubo Li1-11/+35
...and let the errnos bubble up to the callers. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03ceph: add global total_caps to count the mdsc's total caps numberXiubo Li1-0/+1
This will help to reduce using the global mdsc->mutex lock in many places. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-20 21:47:09 +0000