summaryrefslogtreecommitdiffstats
path: root/fs/cachefiles
AgeCommit message (Collapse)AuthorFilesLines
2018-11-30fscache, cachefiles: remove redundant variable 'cache'Colin Ian King1-3/+0
Variable 'cache' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'cache' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-30cachefiles: avoid deprecated get_seconds()Arnd Bergmann1-1/+1
get_seconds() returns an unsigned long can overflow on some architectures and is deprecated because of that. In cachefs, we cast that number to a a 32-bit integer, which will overflow in year 2106 on all architectures. As confirmed by David Howells, the overflow probably isn't harmful in the end, since the timestamps are only used to make the file names unique, but they don't strictly have to be in monotonically increasing order since the files only exist in order to be deleted as quickly as possible. Moving to ktime_get_real_seconds() avoids the deprecated interface. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-30cachefiles: Explicitly cast enumerated type in put_objectNathan Chancellor1-2/+4
Clang warns when one enumerated type is implicitly converted to another. fs/cachefiles/namei.c:247:50: warning: implicit conversion from enumeration type 'enum cachefiles_obj_ref_trace' to different enumeration type 'enum fscache_obj_ref_trace' [-Wenum-conversion] cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_retry); Silence this warning by explicitly casting to fscache_obj_ref_trace, which is also done in put_object. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-28cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is activeKiran Kumar Modukuri1-0/+6
[Description] In a heavily loaded system where the system pagecache is nearing memory limits and fscache is enabled, pages can be leaked by fscache while trying read pages from cachefiles backend. This can happen because two applications can be reading same page from a single mount, two threads can be trying to read the backing page at same time. This results in one of the threads finding that a page for the backing file or netfs file is already in the radix tree. During the error handling cachefiles does not clean up the reference on backing page, leading to page leak. [Fix] The fix is straightforward, to decrement the reference when error is encountered. [dhowells: Note that I've removed the clearance and put of newpage as they aren't attested in the commit message and don't appear to actually achieve anything since a new page is only allocated is newpage!=NULL and any residual new page is cleared before returning.] [Testing] I have tested the fix using following method for 12+ hrs. 1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs 2) create 10000 files of 2.8MB in a NFS mount. 3) start a thread to simulate heavy VM presssure (while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)& 4) start multiple parallel reader for data set at same time find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & .. .. find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & 5) finally check using cat /proc/fs/fscache/stats | grep -i pages ; free -h , cat /proc/meminfo and page-types -r -b lru to ensure all pages are freed. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Shantanu Goel <sgoel01@yahoo.com> Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> [dja: forward ported to current upstream] Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-28cachefiles: Fix an assertion failure when trying to update a failed objectDavid Howells1-1/+2
If cachefiles gets an error other then ENOENT when trying to look up an object in the cache (in this case, EACCES), the object state machine will eventually transition to the DROP_OBJECT state. This state invokes fscache_drop_object() which tries to sync the auxiliary data with the cache (this is done lazily since commit 402cb8dda949d) on an incomplete cache object struct. The problem comes when cachefiles_update_object_xattr() is called to rewrite the xattr holding the data. There's an assertion there that the cache object points to a dentry as we're going to update its xattr. The assertion trips, however, as dentry didn't get set. Fix the problem by skipping the update in cachefiles if the object doesn't refer to a dentry. A better way to do it could be to skip the update from the DROP_OBJECT state handler in fscache, but that might deny the cache the opportunity to update intermediate state. If this error occurs, the kernel log includes lines that look like the following: CacheFiles: Lookup failed error -13 CacheFiles: CacheFiles: Assertion failed ------------[ cut here ]------------ kernel BUG at fs/cachefiles/xattr.c:138! ... Workqueue: fscache_object fscache_object_work_func [fscache] RIP: 0010:cachefiles_update_object_xattr.cold.4+0x18/0x1a [cachefiles] ... Call Trace: cachefiles_update_object+0xdd/0x1c0 [cachefiles] fscache_update_aux_data+0x23/0x30 [fscache] fscache_drop_object+0x18e/0x1c0 [fscache] fscache_object_work_func+0x74/0x2b0 [fscache] process_one_work+0x18d/0x340 worker_thread+0x2e/0x390 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Note that there are actually two issues here: (1) EACCES happened on a cache object and (2) an oops occurred. I think that the second is a consequence of the first (it certainly looks like it ought to be). This patch only deals with the second. Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie") Reported-by: Zhibin Li <zhibli@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-18cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)Al Viro1-1/+1
the victim might've been rmdir'ed just before the lock_rename(); unlike the normal callers, we do not look the source up after the parents are locked - we know it beforehand and just recheck that it's still the child of what used to be its parent. Unfortunately, the check is too weak - we don't spot a dead directory since its ->d_parent is unchanged, dentry is positive, etc. So we sail all the way to ->rename(), with hosting filesystems _not_ expecting to be asked renaming an rmdir'ed subdirectory. The fix is easy, fortunately - the lock on parent is sufficient for making IS_DEADDIR() on child safe. Cc: stable@vger.kernel.org Fixes: 9ae326a69004 (CacheFiles: A cache that backs onto a mounted filesystem) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25cachefiles: Wait rather than BUG'ing on "Unexpected object collision"Kiran Kumar Modukuri1-1/+0
If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in the active object tree, we have been emitting a BUG after logging information about it and the new object. Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared on the old object (or return an error). The ACTIVE flag should be cleared after it has been removed from the active object tree. A timeout of 60s is used in the wait, so we shouldn't be able to get stuck there. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flagKiran Kumar Modukuri1-1/+1
In cachefiles_mark_object_active(), the new object is marked active and then we try to add it to the active object tree. If a conflicting object is already present, we want to wait for that to go away. After the wait, we go round again and try to re-mark the object as being active - but it's already marked active from the first time we went through and a BUG is issued. Fix this by clearing the CACHEFILES_OBJECT_ACTIVE flag before we try again. Analysis from Kiran Kumar Modukuri: [Impact] Oops during heavy NFS + FSCache + Cachefiles CacheFiles: Error: Overlong wait for old active object to go away. BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 CacheFiles: Error: Object already active kernel BUG at fs/cachefiles/namei.c:163! [Cause] In a heavily loaded system with big files being read and truncated, an fscache object for a cookie is being dropped and a new object being looked. The new object being looked for has to wait for the old object to go away before the new object is moved to active state. [Fix] Clear the flag 'CACHEFILES_OBJECT_ACTIVE' for the new object when retrying the object lookup. [Testcase] Have run ~100 hours of NFS stress tests and have not seen this bug recur. [Regression Potential] - Limited to fscache/cachefiles. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25fscache: Fix reference overput in fscache_attach_object() error handlingKiran Kumar Modukuri1-1/+2
When a cookie is allocated that causes fscache_object structs to be allocated, those objects are initialised with the cookie pointer, but aren't blessed with a ref on that cookie unless the attachment is successfully completed in fscache_attach_object(). If attachment fails because the parent object was dying or there was a collision, fscache_attach_object() returns without incrementing the cookie counter - but upon failure of this function, the object is released which then puts the cookie, whether or not a ref was taken on the cookie. Fix this by taking a ref on the cookie when it is assigned in fscache_object_init(), even when we're creating a root object. Analysis from Kiran Kumar: This bug has been seen in 4.4.0-124-generic #148-Ubuntu kernel BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776277 fscache cookie ref count updated incorrectly during fscache object allocation resulting in following Oops. kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/internal.h:321! kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639! [Cause] Two threads are trying to do operate on a cookie and two objects. (1) One thread tries to unmount the filesystem and in process goes over a huge list of objects marking them dead and deleting the objects. cookie->usage is also decremented in following path: nfs_fscache_release_super_cookie -> __fscache_relinquish_cookie ->__fscache_cookie_put ->BUG_ON(atomic_read(&cookie->usage) <= 0); (2) A second thread tries to lookup an object for reading data in following path: fscache_alloc_object 1) cachefiles_alloc_object -> fscache_object_init -> assign cookie, but usage not bumped. 2) fscache_attach_object -> fails in cant_attach_object because the cookie's backing object or cookie's->parent object are going away 3) fscache_put_object -> cachefiles_put_object ->fscache_object_destroy ->fscache_cookie_put ->BUG_ON(atomic_read(&cookie->usage) <= 0); [NOTE from dhowells] It's unclear as to the circumstances in which (2) can take place, given that thread (1) is in nfs_kill_super(), however a conflicting NFS mount with slightly different parameters that creates a different superblock would do it. A backtrace from Kiran seems to show that this is a possibility: kernel BUG at/build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639! ... RIP: __fscache_cookie_put+0x3a/0x40 [fscache] Call Trace: __fscache_relinquish_cookie+0x87/0x120 [fscache] nfs_fscache_release_super_cookie+0x2d/0xb0 [nfs] nfs_kill_super+0x29/0x40 [nfs] deactivate_locked_super+0x48/0x80 deactivate_super+0x5c/0x60 cleanup_mnt+0x3f/0x90 __cleanup_mnt+0x12/0x20 task_work_run+0x86/0xb0 exit_to_usermode_loop+0xc2/0xd0 syscall_return_slowpath+0x4e/0x60 int_ret_from_sys_call+0x25/0x9f [Fix] Bump up the cookie usage in fscache_object_init, when it is first being assigned a cookie atomically such that the cookie is added and bumped up if its refcount is not zero. Remove the assignment in fscache_attach_object(). [Testcase] I have run ~100 hours of NFS stress tests and not seen this bug recur. [Regression Potential] - Limited to fscache/cachefiles. Fixes: ccc4fc3d11e9 ("FS-Cache: Implement the cookie management part of the netfs API") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25cachefiles: Fix refcounting bug in backing-file read monitoringKiran Kumar Modukuri1-5/+12
cachefiles_read_waiter() has the right to access a 'monitor' object by virtue of being called under the waitqueue lock for one of the pages in its purview. However, it has no ref on that monitor object or on the associated operation. What it is allowed to do is to move the monitor object to the operation's to_do list, but once it drops the work_lock, it's actually no longer permitted to access that object. However, it is trying to enqueue the retrieval operation for processing - but it can only do this via a pointer in the monitor object, something it shouldn't be doing. If it doesn't enqueue the operation, the operation may not get processed. If the order is flipped so that the enqueue is first, then it's possible for the work processor to look at the to_do list before the monitor is enqueued upon it. Fix this by getting a ref on the operation so that we can trust that it will still be there once we've added the monitor to the to_do list and dropped the work_lock. The op can then be enqueued after the lock is dropped. The bug can manifest in one of a couple of ways. The first manifestation looks like: FS-Cache: FS-Cache: Assertion failed FS-Cache: 6 == 5 is false ------------[ cut here ]------------ kernel BUG at fs/fscache/operation.c:494! RIP: 0010:fscache_put_operation+0x1e3/0x1f0 ... fscache_op_work_func+0x26/0x50 process_one_work+0x131/0x290 worker_thread+0x45/0x360 kthread+0xf8/0x130 ? create_worker+0x190/0x190 ? kthread_cancel_work_sync+0x10/0x10 ret_from_fork+0x1f/0x30 This is due to the operation being in the DEAD state (6) rather than INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through fscache_put_operation(). The bug can also manifest like the following: kernel BUG at fs/fscache/operation.c:69! ... [exception RIP: fscache_enqueue_operation+246] ... #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028 I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not entirely clear which assertion failed. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by: Lei Xue <carmark.dlut@gmail.com> Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Reported-by: Anthony DeRobertis <aderobertis@metrics.net> Reported-by: NeilBrown <neilb@suse.com> Reported-by: Daniel Axtens <dja@axtens.net> Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Daniel Axtens <dja@axtens.net>
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds1-17/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-05-21cachefiles: vfs_mkdir() might succeed leaving dentry negative unhashedAl Viro1-0/+10
That can (and does, on some filesystems) happen - ->mkdir() (and thus vfs_mkdir()) can legitimately leave its argument negative and just unhash it, counting upon the lookup to pick the object we'd created next time we try to look at that name. Some vfs_mkdir() callers forget about that possibility... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-16proc: introduce proc_create_seq{,_data}Christoph Hellwig1-17/+2
Variants of proc_create{,_data} that directly take a struct seq_operations argument and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-06fscache: Pass object size in rather than calling back for itDavid Howells2-5/+6
Pass the object size in to fscache_acquire_cookie() and fscache_write_page() rather than the netfs providing a callback by which it can be received. This makes it easier to update the size of the object when a new page is written that extends the object. The current object size is also passed by fscache to the check_aux function, obviating the need to store it in the aux data. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Anna Schumaker <anna.schumaker@netapp.com> Tested-by: Steve Dickson <steved@redhat.com>
2018-04-04fscache: Attach the index key and aux data to the cookieDavid Howells3-36/+37
Attach copies of the index key and auxiliary data to the fscache cookie so that: (1) The callbacks to the netfs for this stuff can be eliminated. This can simplify things in the cache as the information is still available, even after the cache has relinquished the cookie. (2) Simplifies the locking requirements of accessing the information as we don't have to worry about the netfs object going away on us. (3) The cache can do lazy updating of the coherency information on disk. As long as the cache is flushed before reboot/poweroff, there's no need to update the coherency info on disk every time it changes. (4) Cookies can be hashed or put in a tree as the index key is easily available. This allows: (a) Checks for duplicate cookies can be made at the top fscache layer rather than down in the bowels of the cache backend. (b) Caching can be added to a netfs object that has a cookie if the cache is brought online after the netfs object is allocated. A certain amount of space is made in the cookie for inline copies of the data, but if it won't fit there, extra memory will be allocated for it. The downside of this is that live cache operation requires more memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Anna Schumaker <anna.schumaker@netapp.com> Tested-by: Steve Dickson <steved@redhat.com>
2018-04-04fscache: Add tracepointsDavid Howells4-13/+50
Add some tracepoints to fscache: (*) fscache_cookie - Tracks a cookie's usage count. (*) fscache_netfs - Logs registration of a network filesystem, including the pointer to the cookie allocated. (*) fscache_acquire - Logs cookie acquisition. (*) fscache_relinquish - Logs cookie relinquishment. (*) fscache_enable - Logs enablement of a cookie. (*) fscache_disable - Logs disablement of a cookie. (*) fscache_osm - Tracks execution of states in the object state machine. and cachefiles: (*) cachefiles_ref - Tracks a cachefiles object's usage count. (*) cachefiles_lookup - Logs result of lookup_one_len(). (*) cachefiles_mkdir - Logs result of vfs_mkdir(). (*) cachefiles_create - Logs result of vfs_create(). (*) cachefiles_unlink - Logs calls to vfs_unlink(). (*) cachefiles_rename - Logs calls to vfs_rename(). (*) cachefiles_mark_active - Logs an object becoming active. (*) cachefiles_wait_active - Logs a wait for an old object to be destroyed. (*) cachefiles_mark_inactive - Logs an object becoming inactive. (*) cachefiles_mark_buried - Logs the burial of an object. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-04fscache, cachefiles: Fix checker warningsDavid Howells1-0/+1
Fix a couple of checker warnings in fscache and cachefiles: (1) fscache_n_op_requeue is never used, so get rid of it. (2) cachefiles_uncache_page() is passed in a lock that it releases, so this needs annotating. Signed-off-by: David Howells <dhowells@redhat.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-3/+3
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27fs: annotate ->poll() instancesAl Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-15mm: remove __GFP_COLDMel Gorman1-4/+2
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm, pagevec: remove cold parameter for pagevecsMel Gorman1-2/+2
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-1/+1
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-20sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list namingIngo Molnar1-1/+1
So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into ↵Ingo Molnar1-1/+1
<linux/wait_bit.h> The wait_bit*() types and APIs are mixed into wait.h, but they are a pretty orthogonal extension of wait-queues. Furthermore, only about 50 kernel files use these APIs, while over 1000 use the regular wait-queue functionality. So clean up the main wait.h by moving the wait-bit functionality out of it, into a separate .h and .c file: include/linux/wait_bit.h for types and APIs kernel/sched/wait_bit.c for the implementation Update all header dependencies. This reduces the size of wait.h rather significantly, by about 30%. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar3-3/+3
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-10-10Merge branch 'work.xattr' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs xattr updates from Al Viro: "xattr stuff from Andreas This completes the switch to xattr_handler ->get()/->set() from ->getxattr/->setxattr/->removexattr" * 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Remove {get,set,remove}xattr inode operations xattr: Stop calling {get,set,remove}xattr inode operations vfs: Check for the IOP_XATTR flag in listxattr xattr: Add __vfs_{get,set,remove}xattr helpers libfs: Use IOP_XATTR flag for empty directory handling vfs: Use IOP_XATTR flag for bad-inode handling vfs: Add IOP_XATTR inode operations flag vfs: Move xattr_resolve_name to the front of fs/xattr.c ecryptfs: Switch to generic xattr handlers sockfs: Get rid of getxattr iop sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names kernfs: Switch to generic xattr handlers hfs: Switch to generic xattr handlers jffs2: Remove jffs2_{get,set,remove}xattr macros xattr: Remove unnecessary NULL attribute name check
2016-10-07xattr: Add __vfs_{get,set,remove}xattr helpersAndreas Gruenbacher2-4/+4
Right now, various places in the kernel check for the existence of getxattr, setxattr, and removexattr inode operations and directly call those operations. Switch to helper functions and test for the IOP_XATTR flag instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]David Howells3-6/+13
An NULL-pointer dereference happens in cachefiles_mark_object_inactive() when it tries to read i_blocks so that it can tell the cachefilesd daemon how much space it's making available. The problem is that cachefiles_drop_object() calls cachefiles_mark_object_inactive() after calling cachefiles_delete_object() because the object being marked active staves off attempts to (re-)use the file at that filename until after it has been deleted. This means that d_inode is NULL by the time we come to try to access it. To fix the problem, have the caller of cachefiles_mark_object_inactive() supply the number of blocks freed up. Without this, the following oops may occur: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 IP: [<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] ... CPU: 11 PID: 527 Comm: kworker/u64:4 Tainted: G I ------------ 3.10.0-470.el7.x86_64 #1 Hardware name: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.19 03/11/2011 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880035edaf10 ti: ffff8800b77c0000 task.ti: ffff8800b77c0000 RIP: 0010:[<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] RSP: 0018:ffff8800b77c3d70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800bf6cc400 RCX: 0000000000000034 RDX: 0000000000000000 RSI: ffff880090ffc710 RDI: ffff8800bf761ef8 RBP: ffff8800b77c3d88 R08: 2000000000000000 R09: 0090ffc710000000 R10: ff51005d2ff1c400 R11: 0000000000000000 R12: ffff880090ffc600 R13: ffff8800bf6cc520 R14: ffff8800bf6cc400 R15: ffff8800bf6cc498 FS: 0000000000000000(0000) GS:ffff8800bb8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000098 CR3: 00000000019ba000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880090ffc600 ffff8800bf6cc400 ffff8800867df140 ffff8800b77c3db0 ffffffffa06c48cb ffff880090ffc600 ffff880090ffc180 ffff880090ffc658 ffff8800b77c3df0 ffffffffa085d846 ffff8800a96b8150 ffff880090ffc600 Call Trace: [<ffffffffa06c48cb>] cachefiles_drop_object+0x6b/0xf0 [cachefiles] [<ffffffffa085d846>] fscache_drop_object+0xd6/0x1e0 [fscache] [<ffffffffa085d615>] fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff810a605b>] process_one_work+0x17b/0x470 [<ffffffff810a6e96>] worker_thread+0x126/0x410 [<ffffffff810a6d70>] ? rescuer_thread+0x460/0x460 [<ffffffff810ae64f>] kthread+0xcf/0xe0 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81695418>] ret_from_fork+0x58/0x90 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 The oopsing code shows: callq 0xffffffff810af6a0 <wake_up_bit> mov 0xf8(%r12),%rax mov 0x30(%rax),%rax mov 0x98(%rax),%rax <---- oops here lock add %rax,0x130(%rbx) where this is: d_backing_inode(object->dentry)->i_blocks Fixes: a5b3a80b899bda0f456f1246c4c5a1191ea01519 (CacheFiles: Provide read-and-reset release counters for cachefilesd) Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27fs: rename "rename2" i_op to "rename"Miklos Szeredi1-1/+1
Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27vfs: remove unused i_op->renameMiklos Szeredi1-2/+1
No in-tree uses remain. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-03cachefiles: Fix race between inactivating and culling a cache objectDavid Howells1-2/+3
There's a race between cachefiles_mark_object_inactive() and cachefiles_cull(): (1) cachefiles_cull() can't delete a backing file until the cache object is marked inactive, but as soon as that's the case it's fair game. (2) cachefiles_mark_object_inactive() marks the object as being inactive and *only then* reads the i_blocks on the backing inode - but cachefiles_cull() might've managed to delete it by this point. Fix this by making sure cachefiles_mark_object_inactive() gets any data it needs from the backing inode before deactivating the object. Without this, the following oops may occur: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 IP: [<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] ... CPU: 11 PID: 527 Comm: kworker/u64:4 Tainted: G I ------------ 3.10.0-470.el7.x86_64 #1 Hardware name: Hewlett-Packard HP Z600 Workstation/0B54h, BIOS 786G4 v03.19 03/11/2011 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880035edaf10 ti: ffff8800b77c0000 task.ti: ffff8800b77c0000 RIP: 0010:[<ffffffffa06c5cc1>] cachefiles_mark_object_inactive+0x61/0xb0 [cachefiles] RSP: 0018:ffff8800b77c3d70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800bf6cc400 RCX: 0000000000000034 RDX: 0000000000000000 RSI: ffff880090ffc710 RDI: ffff8800bf761ef8 RBP: ffff8800b77c3d88 R08: 2000000000000000 R09: 0090ffc710000000 R10: ff51005d2ff1c400 R11: 0000000000000000 R12: ffff880090ffc600 R13: ffff8800bf6cc520 R14: ffff8800bf6cc400 R15: ffff8800bf6cc498 FS: 0000000000000000(0000) GS:ffff8800bb8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000098 CR3: 00000000019ba000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880090ffc600 ffff8800bf6cc400 ffff8800867df140 ffff8800b77c3db0 ffffffffa06c48cb ffff880090ffc600 ffff880090ffc180 ffff880090ffc658 ffff8800b77c3df0 ffffffffa085d846 ffff8800a96b8150 ffff880090ffc600 Call Trace: [<ffffffffa06c48cb>] cachefiles_drop_object+0x6b/0xf0 [cachefiles] [<ffffffffa085d846>] fscache_drop_object+0xd6/0x1e0 [fscache] [<ffffffffa085d615>] fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff810a605b>] process_one_work+0x17b/0x470 [<ffffffff810a6e96>] worker_thread+0x126/0x410 [<ffffffff810a6d70>] ? rescuer_thread+0x460/0x460 [<ffffffff810ae64f>] kthread+0xcf/0xe0 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81695418>] ret_from_fork+0x58/0x90 [<ffffffff810ae580>] ? kthread_create_on_node+0x140/0x140 The oopsing code shows: callq 0xffffffff810af6a0 <wake_up_bit> mov 0xf8(%r12),%rax mov 0x30(%rax),%rax mov 0x98(%rax),%rax <---- oops here lock add %rax,0x130(%rbx) where this is: d_backing_inode(object->dentry)->i_blocks Fixes: a5b3a80b899bda0f456f1246c4c5a1191ea01519 (CacheFiles: Provide read-and-reset release counters for cachefilesd) Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-30Merge branch 'd_real' of ↵Al Viro1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into work.misc
2016-06-01FS-Cache: make check_consistency callback return intYan, Zheng1-1/+1
__fscache_check_consistency() calls check_consistency() callback and return the callback's return value. But the return type of check_consistency() is bool. So __fscache_check_consistency() return 1 if the cache is inconsistent. This is inconsistent with the document. Signed-off-by: Yan, Zheng <zyan@redhat.com> Acked-by: David Howells <dhowells@redhat.com>
2016-05-29drop redundant ->owner initializationsAl Viro1-1/+0
it's not needed for file_operations of inodes located on fs defined in the hosting module and for file_operations that go into procfs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-19/+19
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-01CacheFiles: Provide read-and-reset release counters for cachefilesdDavid Howells4-17/+39
Provide read-and-reset objects- and blocks-released counters for cachefilesd to use to work out whether there's anything new that can be culled. One of the problems cachefilesd has is that if all the objects in the cache are pinned by inodes lying dormant in the kernel inode cache, there isn't anything for it to cull. In such a case, it just spins around walking the filesystem tree and scanning for something to cull. This eats up a lot of CPU time. By telling cachefilesd if there have been any releases, the daemon can sleep until there is the possibility of something to do. cachefilesd finds this information by the following means: (1) When the control fd is read, the kernel presents a list of values of interest. "freleased=N" and "breleased=N" are added to this list to indicate the number of files released and number of blocks released since the last read call. At this point the counters are reset. (2) POLLIN is signalled if the number of files released becomes greater than 0. Note that by 'released' it just means that the kernel has released its interest in those files for the moment, not necessarily that the files should be deleted from the cache. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22wrappers for ->i_mutex accessAl Viro2-22/+22
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro1-9/+3
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-16FS-Cache: Add missing initialization of ret in cachefiles_write_page()Geert Uytterhoeven1-1/+1
fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’: fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in this function If the jump to label "error" is taken, "ret" will indeed be uninitialized, and random stack data may be printed by the debug code. Fixes: 102f4d900c9c8f5e ("FS-Cache: Handle a write to the page immediately beyond the EOF marker") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11FS-Cache: Handle a write to the page immediately beyond the EOF markerDavid Howells1-30/+37
Handle a write being requested to the page immediately beyond the EOF marker on a cache object. Currently this gets an assertion failure in CacheFiles because the EOF marker is used there to encode information about a partial page at the EOF - which could lead to an unknown blank spot in the file if we extend the file over it. The problem is actually in fscache where we check the index of the page being written against store_limit. store_limit is set to the number of pages that we're allowed to store by fscache_set_store_limit() - which means it's one more than the index of the last page we're allowed to store. The problem is that we permit writing to a page with an index _equal_ to the store limit - when we should reject that case. Whilst we're at it, change the triggered assertion in CacheFiles to just return -ENOBUFS instead. The assertion failure looks something like this: CacheFiles: Assertion failed 1000 < 7b1 is false ------------[ cut here ]------------ kernel BUG at fs/cachefiles/rdwr.c:962! ... RIP: 0010:[<ffffffffa02c9e83>] [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles] Cc: stable@vger.kernel.org # v2.6.31+; earlier - that + backport of a17754f (at least) Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11cachefiles: perform test on s_blocksize when opening cache file.NeilBrown2-6/+2
cachefiles requires that s_blocksize in the cache is not greater than PAGE_SIZE, and performs the check every time a block is accessed. Move the test to the place where the file is "opened", where other file-validity tests are performed. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-06mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman1-1/+1
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-23Merge branch 'fscache-fixes' into for-nextAl Viro2-13/+21
2015-04-15VFS: fs/cachefiles: d_backing_inode() annotationsDavid Howells6-62/+62
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: Cachefiles should perform fs modifications on the top layer onlyDavid Howells2-28/+28
Cachefiles should perform fs modifications (eg. vfs_unlink()) on the top layer only and should not attempt to alter the lower layer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-24FS-Cache: Count culled objects and objects rejected due to lack of spaceDavid Howells2-13/+21
Count the number of objects that get culled by the cache backend and the number of objects that the cache backend declines to instantiate due to lack of space in the cache. These numbers are made available through /proc/fs/fscache/stats Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Steve Dickson <steved@redhat.com> Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-02-22Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversionsDavid Howells4-9/+9
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>