Age | Commit message (Collapse) | Author | Files | Lines |
|
Add a netfs_cache_ops method by which a network filesystem can ask the
cache about what data it has available and where so that it can make a
multipage read more efficient.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a check that the backing filesystem supports the creation of
tmpfiles[1].
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/568749bd7cc02908ecf6f3d6a611b6f9cf5c4afd.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/164251406558.3435901.1249023136670058162.stgit@warthog.procyon.org.uk/ # v1
|
|
Add a comment to explain the checks that cachefiles is making of the
backing filesystem[1].
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/568749bd7cc02908ecf6f3d6a611b6f9cf5c4afd.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/164251405621.3435901.771439791811515914.stgit@warthog.procyon.org.uk/ # v1
|
|
Add a tracepoint to log failure to apply an active mark to a file in
addition to tracing successfully setting and unsetting the mark.
Also include the backing file inode number in the message logged to dmesg.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/164251404666.3435901.17331742792401482190.stgit@warthog.procyon.org.uk/ # v1
|
|
Make some adjustments to tracepoints to make the tracing a bit more
followable:
(1) Standardise on displaying the backing inode number as "B=<hex>" with
no leading zeros.
(2) Make the cachefiles_lookup tracepoint log the directory inode number
as well as the looked-up inode number.
(3) Add a cachefiles_lookup tracepoint into cachefiles_get_directory() to
log directory lookup.
(4) Add a new cachefiles_mkdir tracepoint and use that to log a successful
mkdir from cachefiles_get_directory().
(5) Make the cachefiles_unlink and cachefiles_rename tracepoints log the
inode number of the affected file/dir rather than dentry struct
pointers.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/164251403694.3435901.9797725381831316715.stgit@warthog.procyon.org.uk/ # v1
|
|
fscache_acquire_cache() requires a non-empty name, while 'tag <name>'
command is optional for cachefilesd.
Thus set default tag name if it's unspecified to avoid the regression of
cachefilesd. The logic is the same with that before rewritten.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/164251399914.3435901.4761991152407411408.stgit@warthog.procyon.org.uk/ # v1
|
|
Cachefiles keeps track of how much space is available on the backing
filesystem and refuses new writes permission to start if there isn't enough
(we especially don't want ENOSPC happening). It also tracks the amount of
data pending in DIO writes (cache->b_writing) and reduces the amount of
free space available by this amount before deciding if it can set up a new
write.
However, the old fscache I/O API was very much page-granularity dependent
and, as such, cachefiles's cache->bshift was meant to be a multiplier to
get from PAGE_SIZE to block size (ie. a blocksize of 512 would give a shift
of 3 for a 4KiB page) - and this was incorrectly being used to turn the
number of bytes in a DIO write into a number of blocks, leading to a
massive over estimation of the amount of data in flight.
Fix this by changing cache->bshift to be a multiplier from bytes to
blocksize and deal with quantities of blocks, not quantities of pages.
Fix also the rounding in the calculation in cachefiles_write() which needs
a "- 1" inserting.
Fixes: 047487c947e8 ("cachefiles: Implement the I/O routines")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/164251398954.3435901.7138806620218474123.stgit@warthog.procyon.org.uk/ # v1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache rewrite from David Howells:
"This is a set of patches that rewrites the fscache driver and the
cachefiles driver, significantly simplifying the code compared to
what's upstream, removing the complex operation scheduling and object
state machine in favour of something much smaller and simpler.
The series is structured such that the first few patches disable
fscache use by the network filesystems using it, remove the cachefiles
driver entirely and as much of the fscache driver as can be got away
with without causing build failures in the network filesystems.
The patches after that recreate fscache and then cachefiles,
attempting to add the pieces in a logical order. Finally, the
filesystems are reenabled and then the very last patch changes the
documentation.
[!] Note: I have dropped the cifs patch for the moment, leaving local
caching in cifs disabled. I've been having trouble getting that
working. I think I have it done, but it needs more testing (there
seem to be some test failures occurring with v5.16 also from
xfstests), so I propose deferring that patch to the end of the
merge window.
WHY REWRITE?
============
Fscache's operation scheduling API was intended to handle sequencing
of cache operations, which were all required (where possible) to run
asynchronously in parallel with the operations being done by the
network filesystem, whilst allowing the cache to be brought online and
offline and to interrupt service for invalidation.
With the advent of the tmpfile capacity in the VFS, however, an
opportunity arises to do invalidation much more simply, without having
to wait for I/O that's actually in progress: Cachefiles can simply
create a tmpfile, cut over the file pointer for the backing object
attached to a cookie and abandon the in-progress I/O, dismissing it
upon completion.
Future work here would involve using Omar Sandoval's vfs_link() with
AT_LINK_REPLACE[1] to allow an extant file to be displaced by a new
hard link from a tmpfile as currently I have to unlink the old file
first.
These patches can also simplify the object state handling as I/O
operations to the cache don't all have to be brought to a stop in
order to invalidate a file. To that end, and with an eye on to writing
a new backing cache model in the future, I've taken the opportunity to
simplify the indexing structure.
I've separated the index cookie concept from the file cookie concept
by C type now. The former is now called a "volume cookie" (struct
fscache_volume) and there is a container of file cookies. There are
then just the two levels. All the index cookie levels are collapsed
into a single volume cookie, and this has a single printable string as
a key. For instance, an AFS volume would have a key of something like
"afs,example.com,1000555", combining the filesystem name, cell name
and volume ID. This is freeform, but must not have '/' chars in it.
I've also eliminated all pointers back from fscache into the network
filesystem. This required the duplication of a little bit of data in
the cookie (cookie key, coherency data and file size), but it's not
actually that much. This gets rid of problems with making sure we keep
netfs data structures around so that the cache can access them.
These patches mean that most of the code that was in the drivers
before is simply gone and those drivers are now almost entirely new
code. That being the case, there doesn't seem any particular reason to
try and maintain bisectability across it. Further, there has to be a
point in the middle where things are cut over as there's a single
point everything has to go through (ie. /dev/cachefiles) and it can't
be in use by two drivers at once.
ISSUES YET OUTSTANDING
======================
There are some issues still outstanding, unaddressed by this patchset,
that will need fixing in future patchsets, but that don't stop this
series from being usable:
(1) The cachefiles driver needs to stop using the backing filesystem's
metadata to store information about what parts of the cache are
populated. This is not reliable with modern extent-based
filesystems.
Fixing this is deferred to a separate patchset as it involves
negotiation with the network filesystem and the VM as to how much
data to download to fulfil a read - which brings me on to (2)...
(2) NFS (and CIFS with the dropped patch) do not take account of how
the cache would like I/O to be structured to meet its granularity
requirements. Previously, the cache used page granularity, which
was fine as the network filesystems also dealt in page
granularity, and the backing filesystem (ext4, xfs or whatever)
did whatever it did out of sight. However, we now have folios to
deal with and the cache will now have to store its own metadata to
track its contents.
The change I'm looking at making for cachefiles is to store
content bitmaps in one or more xattrs and making a bit in the map
correspond to something like a 256KiB block. However, the size of
an xattr and the fact that they have to be read/updated in one go
means that I'm looking at covering 1GiB of data per 512-byte map
and storing each map in an xattr. Cachefiles has the potential to
grow into a fully fledged filesystem of its very own if I'm not
careful.
However, I'm also looking at changing things even more radically
and going to a different model of how the cache is arranged and
managed - one that's more akin to the way, say, openafs does
things - which brings me on to (3)...
(3) The way cachefilesd does culling is very inefficient for large
caches and it would be better to move it into the kernel if I can
as cachefilesd has to keep asking the kernel if it can cull a
file. Changing the way the backend works would allow this to be
addressed.
BITS THAT MAY BE CONTROVERSIAL
==============================
There are some bits I've added that may be controversial:
(1) I've provided a flag, S_KERNEL_FILE, that cachefiles uses to check
if a files is already being used by some other kernel service
(e.g. a duplicate cachefiles cache in the same directory) and
reject it if it is. This isn't entirely necessary, but it helps
prevent accidental data corruption.
I don't want to use S_SWAPFILE as that has other effects, but
quite possibly swapon() should set S_KERNEL_FILE too.
Note that it doesn't prevent userspace from interfering, though
perhaps it should. (I have made it prevent a marked directory from
being rmdir-able).
(2) Cachefiles wants to keep the backing file for a cookie open whilst
we might need to write to it from network filesystem writeback.
The problem is that the network filesystem unuses its cookie when
its file is closed, and so we have nothing pinning the cachefiles
file open and it will get closed automatically after a short time
to avoid EMFILE/ENFILE problems.
Reopening the cache file, however, is a problem if this is being
done due to writeback triggered by exit(). Some filesystems will
oops if we try to open a file in that context because they want to
access current->fs or suchlike.
To get around this, I added the following:
(A) An inode flag, I_PINNING_FSCACHE_WB, to be set on a network
filesystem inode to indicate that we have a usage count on the
cookie caching that inode.
(B) A flag in struct writeback_control, unpinned_fscache_wb, that
is set when __writeback_single_inode() clears the last dirty
page from i_pages - at which point it clears
I_PINNING_FSCACHE_WB and sets this flag.
This has to be done here so that clearing I_PINNING_FSCACHE_WB
can be done atomically with the check of PAGECACHE_TAG_DIRTY
that clears I_DIRTY_PAGES.
(C) A function, fscache_set_page_dirty(), which if it is not set,
sets I_PINNING_FSCACHE_WB and calls fscache_use_cookie() to
pin the cache resources.
(D) A function, fscache_unpin_writeback(), to be called by
->write_inode() to unuse the cookie.
(E) A function, fscache_clear_inode_writeback(), to be called when
the inode is evicted, before clear_inode() is called. This
cleans up any lingering I_PINNING_FSCACHE_WB.
The network filesystem can then use these tools to make sure that
fscache_write_to_cache() can write locally modified data to the
cache as well as to the server.
For the future, I'm working on write helpers for netfs lib that
should allow this facility to be removed by keeping track of the
dirty regions separately - but that's incomplete at the moment and
is also going to be affected by folios, one way or another, since
it deals with pages"
Link: https://lore.kernel.org/all/510611.1641942444@warthog.procyon.org.uk/
Tested-by: Dominique Martinet <asmadeus@codewreck.org> # 9p
Tested-by: kafs-testing@auristor.com # afs
Tested-by: Jeff Layton <jlayton@kernel.org> # ceph
Tested-by: Dave Wysochanski <dwysocha@redhat.com> # nfs
Tested-by: Daire Byrne <daire@dneg.com> # nfs
* tag 'fscache-rewrite-20220111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (67 commits)
9p, afs, ceph, nfs: Use current_is_kswapd() rather than gfpflags_allow_blocking()
fscache: Add a tracepoint for cookie use/unuse
fscache: Rewrite documentation
ceph: add fscache writeback support
ceph: conversion to new fscache API
nfs: Implement cache I/O by accessing the cache directly
nfs: Convert to new fscache volume/cookie API
9p: Copy local writes to the cache when writing to the server
9p: Use fscache indexing rewrite and reenable caching
afs: Skip truncation on the server of data we haven't written yet
afs: Copy local writes to the cache when writing to the server
afs: Convert afs to use the new fscache API
fscache, cachefiles: Display stat of culling events
fscache, cachefiles: Display stats of no-space events
cachefiles: Allow cachefiles to actually function
fscache, cachefiles: Store the volume coherency data
cachefiles: Implement the I/O routines
cachefiles: Implement cookie resize for truncate
cachefiles: Implement begin and end I/O operation
cachefiles: Implement backing file wrangling
...
|
|
Add a stat counter of culling events whereby the cache backend culls a file
to make space (when asked by cachefilesd in this case) and display in
/proc/fs/fscache/stats.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819654165.215744.3797804661644212436.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906961387.143852.9291157239960289090.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967168266.1823006.14436200166581605746.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021567619.640689.4339228906248763197.stgit@warthog.procyon.org.uk/ # v4
|
|
Add stat counters of no-space events that caused caching not to happen and
display in /proc/fs/fscache/stats.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819653216.215744.17210522251617386509.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906958369.143852.7257100711818401748.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967166917.1823006.14842444049198947892.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021566184.640689.4417328329632709265.stgit@warthog.procyon.org.uk/ # v4
|
|
Remove the block that allowed cachefiles to be compiled but prevented it
from actually starting a cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819649497.215744.2872504990762846767.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906956491.143852.4951522864793559189.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967165374.1823006.14248189932202373809.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021564379.640689.7921380491176827442.stgit@warthog.procyon.org.uk/ # v4
|
|
Store the volume coherency data in an xattr and check it when we rebind the
volume. If it doesn't match the cache volume is moved to the graveyard and
rebuilt anew.
Changes
=======
ver #4:
- Remove a couple of debugging prints.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/163967164397.1823006.2950539849831291830.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021563138.640689.15851092065380543119.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement the I/O routines for cachefiles. There are two sets of routines
here: preparation and actual I/O.
Preparation for read involves looking to see whether there is data present,
and how much. Netfslib tells us what it wants us to do and we have the
option of adjusting shrinking and telling it whether to read from the
cache, download from the server or simply clear a region.
Preparation for write involves checking for space and defending against
possibly running short of space, if necessary punching out a hole in the
file so that we don't leave old data in the cache if we update the
coherency information.
Then there's a read routine and a write routine. They wait for the cookie
state to move to something appropriate and then start a potentially
asynchronous direct I/O operation upon it.
Changes
=======
ver #2:
- Fix a misassigned variable[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/YaZOCk9zxApPattb@archlinux-ax161/ [1]
Link: https://lore.kernel.org/r/163819647945.215744.17827962047487125939.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906954666.143852.1504887120569779407.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967163110.1823006.9206718511874339672.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021562168.640689.8802250542405732391.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement resizing an object, using truncate and/or fallocate to adjust the
object.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819646631.215744.13819016478175576761.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906952877.143852.4140962906331914859.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967162168.1823006.5941985259926902274.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021560394.640689.9972155785508094960.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement the methods for beginning and ending an I/O operation.
When called to begin an I/O operation, we are guaranteed that the cookie
has reached a certain stage (we're called by fscache after it has done a
suitable wait).
If a file is available, we paste a ref over into the cache resources for
the I/O routines to use. This means that the object can be invalidated
whilst the I/O is ongoing without the need to synchronise as the file
pointer in the object is replaced, but the file pointer in the cache
resources is unaffected.
Ending the operation just requires ditching any refs we have and dropping
the access guarantee that fscache got for us on the cookie.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819645033.215744.2199344081658268312.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906951916.143852.9531384743995679857.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967161222.1823006.4461476204800357263.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021559030.640689.3684291785218094142.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement the wrangling of backing files, including the following pieces:
(1) Lookup and creation of a file on disk, using a tmpfile if the file
isn't yet present. The file is then opened, sized for DIO and the
file handle is attached to the cachefiles_object struct. The inode is
marked to indicate that it's in use by a kernel service.
(2) Invalidation of an object, creating a tmpfile and switching the file
pointer in the cachefiles object.
(3) Committing a file to disk, including setting the coherency xattr on it
and, if necessary, creating a hard link to it.
Note that this would be a good place to use Omar Sandoval's vfs_link()
with AT_LINK_REPLACE[1] as I may have to unlink an old file before I
can link a tmpfile into place.
(4) Withdrawal of open objects when a cache is being withdrawn or a cookie
is relinquished. This involves committing or discarding the file.
Changes
=======
ver #2:
- Fix logging of wrong error[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/20211203094950.GA2480@kili/ [1]
Link: https://lore.kernel.org/r/163819644097.215744.4505389616742411239.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906949512.143852.14222856795032602080.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967158526.1823006.17482695321424642675.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021557060.640689.16373541458119269871.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement the ability for the userspace daemon to try and cull a file or
directory in the cache. Two daemon commands are implemented:
(1) The "inuse" command. This queries if a file is in use or whether it
can be deleted. It checks the S_KERNEL_FILE flag on the inode
referred to by the specified filename.
(2) The "cull" command. This asks for a file or directory to be removed,
where removal means either unlinking it or moving it to the graveyard
directory for userspace to dismantle.
Changes
=======
ver #2:
- Fix logging of wrong error[1].
- Need to unmark an inode we've moved to the graveyard before unlocking.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/20211203094950.GA2480@kili/ [1]
Link: https://lore.kernel.org/r/163819643179.215744.13641580295708315695.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906945705.143852.8177595531814485350.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967155792.1823006.1088936326902550910.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021555037.640689.9472627499842585255.stgit@warthog.procyon.org.uk/ # v4
|
|
Use an inode flag, S_KERNEL_FILE, to mark that a backing file is in use by
the kernel to prevent cachefiles or other kernel services from interfering
with that file.
Using S_SWAPFILE instead isn't really viable as that has other effects in
the I/O paths.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819642273.215744.6414248677118690672.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906943215.143852.16972351425323967014.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967154118.1823006.13227551961786743991.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021541207.640689.564689725898537127.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/164021552299.640689.10578652796777392062.stgit@warthog.procyon.org.uk/ # v4
|
|
Use an xattr on each backing file in the cache to store some metadata, such
as the content type and the coherency data.
Five content types are defined:
(0) No content stored.
(1) The file contains a single monolithic blob and must be all or nothing.
This would be used for something like an AFS directory or a symlink.
(2) The file is populated with content completely up to a point with
nothing beyond that.
(3) The file has a map attached and is sparsely populated. This would be
stored in one or more additional xattrs.
(4) The file is dirty, being in the process of local modification and the
contents are not necessarily represented correctly by the metadata.
The file should be deleted if this is seen on binding.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819641320.215744.16346770087799536862.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906942248.143852.5423738045012094252.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967151734.1823006.9301249989443622576.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021550471.640689.553853918307994335.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement a function to encode a binary cookie key as something that can be
used as a filename. Four options are considered:
(1) All printable chars with no '/' characters. Prepend a 'D' to indicate
the encoding but otherwise use as-is.
(2) Appears to be an array of __be32. Encode as 'S' plus a list of
hex-encoded 32-bit ints separated by commas. If a number is 0, it is
rendered as "" instead of "0".
(3) Appears to be an array of __le32. Encoded as (2) but with a 'T'
encoding prefix.
(4) Encoded as base64 with an 'E' prefix plus a second char indicating how
much padding is involved. A non-standard base64 encoding is used
because '/' cannot be used in the encoded form.
If (1) is not possible, whichever of (2), (3) or (4) produces the shortest
string is selected (hex-encoding a number may be less dense than base64
encoding it).
Note that the prefix characters have to be selected from the set [DEIJST@]
lest cachefilesd remove the files because it recognise the name.
Changes
=======
ver #2:
- Fix a short allocation that didn't allow for a string terminator[1]
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/bcefb8f2-576a-b3fc-cc29-89808ebfd7c1@linux.alibaba.com/ [1]
Link: https://lore.kernel.org/r/163819640393.215744.15212364106412961104.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906940529.143852.17352132319136117053.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967149827.1823006.6088580775428487961.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021549223.640689.14762875188193982341.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement allocate, get, see and put functions for the cachefiles_object
struct. The members of the struct we're going to need are also added.
Additionally, implement a lifecycle tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819639457.215744.4600093239395728232.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906939569.143852.3594314410666551982.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967148857.1823006.6332962598220464364.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021547762.640689.8422781599594931000.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement support for creating the directory layout for a volume on disk
and setting up and withdrawing volume caching.
Each volume has a directory named for the volume key under the root of the
cache (prefixed with an 'I' to indicate to cachefilesd that it's an index)
and then creates a bunch of hash bucket subdirectories under that (named as
'@' plus a hex number) in which cookie files will be created.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819635314.215744.13081522301564537723.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906936397.143852.17788457778396467161.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967143860.1823006.7185205806080225038.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021545212.640689.5064821392307582927.stgit@warthog.procyon.org.uk/ # v4
|
|
Do the following:
(1) Fill out cachefiles_daemon_add_cache() so that it sets up the cache
directories and registers the cache with cachefiles.
(2) Add a function to do the top-level part of cache withdrawal and
unregistration.
(3) Add a function to sync a cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819633175.215744.10857127598041268340.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906935445.143852.15545194974036410029.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967142904.1823006.244055483596047072.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021543872.640689.14370017789605073222.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement a function to get/create structural directories in the cache.
This is used for setting up a cache and creating volume substructures. The
directory in memory are marked with the S_KERNEL_FILE inode flag whilst
they're in use to tell rmdir to reject attempts to remove them.
Changes
=======
ver #3:
- Return an indication as to whether the directory was freshly created.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819631182.215744.3322471539523262619.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906933130.143852.962088616746509062.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967141952.1823006.7832985646370603833.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021542169.640689.18266858945694357839.stgit@warthog.procyon.org.uk/ # v4
|
|
Use an inode flag, S_KERNEL_FILE, to mark that a backing file is in use by
the kernel to prevent cachefiles or other kernel services from interfering
with that file.
Alter rmdir to reject attempts to remove a directory marked with this flag.
This is used by cachefiles to prevent cachefilesd from removing them.
Using S_SWAPFILE instead isn't really viable as that has other effects in
the I/O paths.
Changes
=======
ver #3:
- Check for the object pointer being NULL in the tracepoints rather than
the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819630256.215744.4815885535039369574.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906931596.143852.8642051223094013028.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967141000.1823006.12920680657559677789.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021541207.640689.564689725898537127.stgit@warthog.procyon.org.uk/ # v4
|
|
Provide a function to check how much space there is. This also flips the
state on the cache and will signal the daemon to inform it of the change
and to ask it to do some culling if necessary.
We will also need to subtract the amount of data currently being written to
the cache (cache->b_writing) from the amount of available space to avoid
hitting ENOSPC accidentally.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819629322.215744.13457425294680841213.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906930100.143852.1681026700865762069.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967140058.1823006.7781243664702837128.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021539957.640689.12477177372616805706.stgit@warthog.procyon.org.uk/ # v4
|
|
Register a misc device with which to talk to the daemon. The misc device
holds a cache set up through it around and closing the device kills the
cache.
cachefilesd communicates with the kernel by passing it single-line text
commands. Parse these and use them to parameterise the cache state. This
does not implement the command to actually bring a cache online. That's
left for later.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819628388.215744.17712097043607299608.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906929128.143852.14065207858943654011.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967139085.1823006.3514846391807454287.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021538400.640689.9172006906288062041.stgit@warthog.procyon.org.uk/ # v4
|
|
Implement code to derive a new set of creds for the cachefiles to use when
making VFS or I/O calls and to change the auditing info since the
application interacting with the network filesystem is not accessing the
cache directly. Cachefiles uses override_creds() to change the effective
creds temporarily.
set_security_override_from_ctx() is called to derive the LSM 'label' that
the cachefiles driver will act with. set_create_files_as() is called to
determine the LSM 'label' that will be applied to files and directories
created in the cache. These functions alter the new creds.
Also implement a couple of functions to wrap the calls to begin/end cred
overriding.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819627469.215744.3603633690679962985.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906928172.143852.15886637013364286786.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967138138.1823006.7620933448261939504.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021537001.640689.4081334436031700558.stgit@warthog.procyon.org.uk/ # v4
|
|
Add a macro to report a cache I/O error and to tell fscache that the cache
is in trouble.
Also add a pointer to the fscache cache cookie from the cachefiles_cache
struct as we need that to pass to fscache_io_error().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819626562.215744.1503690975344731661.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906927235.143852.13694625647880837563.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967137158.1823006.2065038830569321335.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021536053.640689.5306822604644352548.stgit@warthog.procyon.org.uk/ # v4
|
|
Add two trace points to log errors, one for vfs operations like mkdir or
create, and one for I/O operations, like read, write or truncate.
Also add the beginnings of a struct that is going to represent a data file
and place a debugging ID in it for the tracepoints to record.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819625632.215744.17907340966178411033.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906926297.143852.18267924605548658911.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967135390.1823006.2512120406360156424.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021534029.640689.1875723624947577095.stgit@warthog.procyon.org.uk/ # v4
|
|
Add support for injecting ENOSPC or EIO errors. This needs to be enabled
by CONFIG_CACHEFILES_ERROR_INJECTION=y. Once enabled, ENOSPC on things
like write and mkdir can be triggered by:
echo 1 >/proc/sys/cachefiles/error_injection
and EIO can be triggered on most operations by:
echo 2 >/proc/sys/cachefiles/error_injection
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819624706.215744.6911916249119962943.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906925343.143852.5465695512984025812.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967134412.1823006.7354285948280296595.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021532340.640689.18209494225772443698.stgit@warthog.procyon.org.uk/ # v4
|
|
Define the cachefiles_cache struct that's going to carry the cache-level
parameters and state of a cache.
Define the beginning of the cachefiles_object struct that's going to carry
the state for a data storage object. For the moment this is just a
debugging ID for logging purposes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819623690.215744.2824739137193655547.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906924292.143852.15881439716653984905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967131405.1823006.4480555941533935597.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021530610.640689.846094074334176928.stgit@warthog.procyon.org.uk/ # v4
|
|
Introduce basic skeleton of the rewritten cachefiles driver including
config options so that it can be enabled for compilation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819622766.215744.9108359326983195047.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906923341.143852.3856498104256721447.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967130320.1823006.15791456613198441566.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021528993.640689.9069695476048171884.stgit@warthog.procyon.org.uk/ # v4
|
|
Delete the code from the cachefiles driver to make it easier to rewrite and
resubmit in a logical manner.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819577641.215744.12718114397770666596.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906883770.143852.4149714614981373410.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967076066.1823006.7175712134577687753.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021483619.640689.7586546280515844702.stgit@warthog.procyon.org.uk/ # v4
|
|
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.
Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Pull kiocb->ki_complete() cleanup from Jens Axboe:
"This removes the res2 argument from kiocb->ki_complete().
Only the USB gadget code used it, everybody else passes 0. The USB
guys checked the user gadget code they could find, and everybody just
uses res as expected for the async interface"
* tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block:
fs: get rid of the res2 iocb->ki_complete argument
usb: remove res2 argument from gadget code completions
|
|
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reinforce that page flags are actually in the head page by changing the
type from page to folio. Increases the size of cachefiles by two bytes,
but the kernel core is unchanged in size.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: David Howells <dhowells@redhat.com>
|
|
Change plain %p in format strings in cachefiles code to something more
useful, since %p is now hashed before printing and thus no longer matches
the contents of an oops register dump.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/160588476042.3465195.6837847445880367183.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/162431200692.2908479.9253374494073633778.stgit@warthog.procyon.org.uk/
|
|
Remove the histogram stuff as it's mostly going to be outdated.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431195953.2908479.16770977195634296638.stgit@warthog.procyon.org.uk/
|
|
Use the file_inode() helper rather than accessing ->f_inode directly.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431192403.2908479.4590814090994846904.stgit@warthog.procyon.org.uk/
|
|
Move the cookie debug ID from struct netfs_read_request to struct
netfs_cache_resources and drop the 'cookie_' prefix. This makes it
available for things that want to use netfs_cache_resources without having
a netfs_read_request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431190784.2908479.13386972676539789127.stgit@warthog.procyon.org.uk/
|
|
Add an alternate API by which the cache can be accessed through a kiocb,
doing async DIO, rather than using the current API that tells the cache
where all the pages are.
The new API is intended to be used in conjunction with the netfs helper
library. A filesystem must pick one or the other and not mix them.
Filesystems wanting to use the new API must #define FSCACHE_USE_NEW_IO_API
before #including the header. This prevents them from continuing to use
the old API at the same time as there are incompatibilities in how the
PG_fscache page bit is used.
Changes:
v6:
- Provide a routine to shape a write so that the start and length can be
aligned for DIO[3].
v4:
- Use the vfs_iocb_iter_read/write() helpers[1]
- Move initial definition of fscache_begin_read_operation() here.
- Remove a commented-out line[2]
- Combine ki->term_func calls in cachefiles_read_complete()[2].
- Remove explicit NULL initialiser[2].
- Remove extern on func decl[2].
- Put in param names on func decl[2].
- Remove redundant else[2].
- Fill out the kdoc comment for fscache_begin_read_operation().
- Rename fs/fscache/page2.c to io.c to match later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216102614.GA27555@lst.de/ [1]
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [2]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161118142558.1232039.17993829899588971439.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161037850.2537118.8819808229350326503.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340402057.1303470.8038373593844486698.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539545919.286939.14573472672781434757.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653801477.2770958.10543270629064934227.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789084517.6155.12799689829859169640.stgit@warthog.procyon.org.uk/ # v6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull cachefiles and afs fixes from David Howells:
"Fixes from Matthew Wilcox for page waiting-related issues in
cachefiles and afs as extracted from his folio series[1]:
- In cachefiles, remove the use of the wait_bit_key struct to access
something that's actually in wait_page_key format. The proper
struct is now available in the header, so that should be used
instead.
- Add a proper wait function for waiting killably on the page
writeback flag. This includes a recent bugfix[2] that's not in the
afs code.
- In afs, use the function added in (2) rather than using
wait_on_page_bit_killable() which doesn't provide the
aforementioned bugfix"
Link: https://lore.kernel.org/r/20210320054104.1300774-1-willy@infradead.org[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [2]
Link: https://lore.kernel.org/r/20210323120829.GC1719932@casper.infradead.org/ # v1
* tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use wait_on_page_writeback_killable
mm/writeback: Add wait_on_page_writeback_killable
fs/cachefiles: Remove wait_bit_key layout dependency
|
|
Based on discussions (e.g. in [1]) my understanding of cachefiles and
the cachefiles userspace daemon is that it creates a cache on a local
filesystem (e.g. ext4, xfs etc.) for a network filesystem. The way this
is done is by writing "bind" to /dev/cachefiles and pointing it to the
directory to use as the cache.
Currently this directory can technically also be an idmapped mount but
cachefiles aren't yet fully aware of such mounts and thus don't take the
idmapping into account when creating cache entries. This could leave
users confused as the ownership of the files wouldn't match to what they
expressed in the idmapping. Block cache files on idmapped mounts until
the fscache rework is done and we have ported it to support idmapped
mounts.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/lkml/20210303161528.n3jzg66ou2wa43qb@wittgenstein [1]
Link: https://lore.kernel.org/r/20210316112257.2974212-1-christian.brauner@ubuntu.com/ # v1
Link: https://listman.redhat.com/archives/linux-cachefs/2021-March/msg00044.html # v2
Link: https://lore.kernel.org/r/20210319114146.410329-1-christian.brauner@ubuntu.com/ # v3
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cachefiles was relying on wait_page_key and wait_bit_key being the
same layout, which is fragile. Now that wait_page_key is exposed in
the pagemap.h header, we can remove that fragility
A comment on the need to maintain structure layout equivalence was added by
Linus[1] and that is no longer applicable.
Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-cachefs@redhat.com
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-2-willy@infradead.org/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3510ca20ece0150af6b10c77a74ff1b5c198e3e2 [1]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
The various vfs_*() helpers are called by filesystems or by the vfs
itself to perform core operations such as create, link, mkdir, mknod, rename,
rmdir, tmpfile and unlink. Enable them to handle idmapped mounts. If the
inode is accessed through an idmapped mount map it into the
mount's user namespace and pass it down. Afterwards the checks and
operations are identical to non-idmapped mounts. If the initial user
namespace is passed nothing changes so non-idmapped mounts will see
identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-15-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
In order to handle idmapped mounts we will extend the vfs rename helper
to take two new arguments in follow up patches. Since this operations
already takes a bunch of arguments add a simple struct renamedata and
make the current helper use it before we extend it.
Link: https://lore.kernel.org/r/20210121131959.646623-14-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.
Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|