summaryrefslogtreecommitdiffstats
path: root/fs/btrfs
AgeCommit message (Collapse)AuthorFilesLines
2017-09-29Merge branch 'for-4.14-rc3' of ↵Linus Torvalds11-27/+72
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We've collected a bunch of isolated fixes, for crashes, user-visible behaviour or missing bits from other subsystem cleanups from the past. The overall number is not small but I was not able to make it significantly smaller. Most of the patches are supposed to go to stable" * 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: log csums for all modified extents Btrfs: fix unexpected result when dio reading corrupted blocks btrfs: Report error on removing qgroup if del_qgroup_item fails Btrfs: skip checksum when reading compressed data if some IO have failed Btrfs: fix kernel oops while reading compressed data Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block Btrfs: do not backup tree roots when fsync btrfs: remove BTRFS_FS_QUOTA_DISABLING flag btrfs: propagate error to btrfs_cmp_data_prepare caller btrfs: prevent to set invalid default subvolid Btrfs: send: fix error number for unknown inode types btrfs: fix NULL pointer dereference from free_reloc_roots() btrfs: finish ordered extent cleaning if no progress is found btrfs: clear ordered flag on cleaning up ordered extents Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO Btrfs: do not reset bio->bi_ops while writing bio Btrfs: use the new helper wbc_to_write_flags
2017-09-26btrfs: log csums for all modified extentsJosef Bacik1-2/+10
Amir reported a bug discovered by his cleaned up version of my dm-log-writes xfstests where we were missing csums at certain replay points. This is because fsx was doing an msync(), which essentially fsync()'s a specific range of a file. We will log all modified extents, but only search for the checksums in the range we are being asked to sync. We cannot simply log the extents in the range we're being asked because we are logging the inode item as it is currently, which if it has had a i_size update before the msync means we will miss extents when replaying. We could possibly get around this by marking the inode with the transaction that extended the i_size to see if we have this case, but this would be racy and we'd have to lock the whole range of the inode to make sure we didn't have an ordered extent outside of our range that was in the middle of completing. Fix this simply by keeping track of the modified extents range and logging the csums for the entire range of extents that we are logging. This makes the xfstest pass. Reported-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: fix unexpected result when dio reading corrupted blocksLiu Bo1-5/+2
commit 4246a0b63bd8 ("block: add a bi_error field to struct bio") changed the logic of how dio read endio reports errors. For single stripe dio read, %bio->bi_status reflects the error before verifying checksum, and now we're updating it when data block matches with its checksum, while in the mismatching case, %bio->bi_status is not updated to relfect that. When some blocks in a file have been corrupted on disk, reading such a file ends up with 1) checksum errors are reported in kernel log 2) read(2) returns successfully with some content being 0x01. In order to fix it, we need to report its checksum mismatch error to the upper layer (dio layer in this case) as well. Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reported-by: Goffredo Baroncelli <kreijack@inwind.it> Tested-by: Goffredo Baroncelli <kreijack@inwind.it> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: Report error on removing qgroup if del_qgroup_item failsSargun Dhillon1-0/+2
Previously, we were calling del_qgroup_item, and ignoring the return code resulting in a potential to have divergent in-memory state without an error. Perhaps, it makes sense to handle this error code, and put the filesystem into a read only, or similar state. This patch only adds reporting of the error if the error is fatal, (any error other than qgroup not found). Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: skip checksum when reading compressed data if some IO have failedLiu Bo1-1/+8
Currently even if the underlying disk reports failure on IO, compressed read endio still gets to verify checksum and reports it as a checksum error. In fact, if some IO have failed during reading a compressed data extent , there's no way the checksum could match, therefore, we can skip that in order to return error quickly to the upper layer. Please note that we need to do this after recording the failed mirror index so that read-repair in the upper layer's endio can work properly. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Tested-by: Paul Jones <paul@pauljones.id.au> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: fix kernel oops while reading compressed dataLiu Bo1-0/+9
The kernel oops happens at kernel BUG at fs/btrfs/extent_io.c:2104! ... RIP: clean_io_failure+0x263/0x2a0 [btrfs] It's showing that read-repair code is using an improper mirror index. This is due to the fact that compression read's endio hasn't recorded the failed mirror index in %cb->orig_bio. With this, btrfs's read-repair can work properly on reading compressed data. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reported-by: Paul Jones <paul@pauljones.id.au> Tested-by: Paul Jones <paul@pauljones.id.au> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: use btrfs_op instead of bio_op in __btrfs_map_blockLiu Bo1-1/+1
This seems to be a leftover of commit cf8cddd38bab ("btrfs: don't abuse REQ_OP_* flags for btrfs_map_block"). It should use btrfs_op() helper to provide one of 'enum btrfs_map_op' types. Fixes: cf8cddd38bab ("btrfs: don't abuse REQ_OP_* flags for btrfs_map_block") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: do not backup tree roots when fsyncLiu Bo1-1/+8
It doesn't make sense to backup tree roots when doing fsync, since during fsync those tree roots have not been consistent on disk. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: remove BTRFS_FS_QUOTA_DISABLING flagMisono, Tomohiro2-5/+0
Currently, "btrfs quota enable" would fail after "btrfs quota disable" on the first time with syslog output "qgroup_rescan_init failed with -22", but it would succeed on the second time. When "quota disable" is called, BTRFS_FS_QUOTA_DISABLING flag bit will be set in fs_info->flags in btrfs_quota_disable(), but it will not be droppd in btrfs_run_qgroups() (which is called in btrfs_commit_transaction()) because quota_root has already been freed. If "quota enable" is called after that, both BTRFS_FS_QUOTA_DISABLING and BTRFS_FS_QUOTA_ENABLED flag would be dropped in the btrfs_run_qgroups() since quota_root is not NULL. This leads to the failure of "quota enable" on the first time. BTRFS_FS_QUOTA_DISABLING flag is not used outside of "quota disable" context and is equivalent to whether quota_root is NULL or not. btrfs_run_qgroups() checks whether quota_root is NULL or not in the first place. So, let's remove BTRFS_FS_QUOTA_DISABLING flag. Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: propagate error to btrfs_cmp_data_prepare callerNaohiro Aota1-1/+1
btrfs_cmp_data_prepare() (almost) always returns 0 i.e. ignoring errors from gather_extent_pages(). While the pages are freed by btrfs_cmp_data_free(), cmp->num_pages still has > 0. Then, btrfs_extent_same() try to access the already freed pages causing faults (or violates PageLocked assertion). This patch just return the error as is so that the caller stop the process. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Fixes: f441460202cb ("btrfs: fix deadlock with extent-same and readpage") Cc: <stable@vger.kernel.org> # 4.2 Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: prevent to set invalid default subvolidsatoru takeuchi1-0/+4
`btrfs sub set-default` succeeds to set an ID which isn't corresponding to any fs/file tree. If such the bad ID is set to a filesystem, we can't mount this filesystem without specifying `subvol` or `subvolid` mount options. Fixes: 6ef5ed0d386b ("Btrfs: add ioctl and incompat flag to set the default mount subvol") Cc: <stable@vger.kernel.org> Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: send: fix error number for unknown inode typesTsutomu Itoh1-1/+1
ENOTSUPP should not be returned to the user program. (cf. include/linux/errno.h) Therefore, EOPNOTSUPP is used instead of ENOTSUPP. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: fix NULL pointer dereference from free_reloc_roots()Naohiro Aota1-1/+1
__del_reloc_root should be called before freeing up reloc_root->node. If not, calling __del_reloc_root() dereference reloc_root->node, causing the system BUG. Fixes: 6bdf131fac23 ("Btrfs: don't leak reloc root nodes on error") Cc: <stable@vger.kernel.org> # 4.9 Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: finish ordered extent cleaning if no progress is foundNaohiro Aota1-0/+8
__endio_write_update_ordered() repeats the search until it reaches the end of the specified range. This works well with direct IO path, because before the function is called, it's ensured that there are ordered extents filling whole the range. It's not the case, however, when it's called from run_delalloc_range(): it is possible to have error in the midle of the loop in e.g. run_delalloc_nocow(), so that there exisits the range not covered by any ordered extents. By cleaning such "uncomplete" range, __endio_write_update_ordered() stucks at offset where there're no ordered extents. Since the ordered extents are created from head to tail, we can stop the search if there are no offset progress. Fixes: 524272607e88 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang") Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26btrfs: clear ordered flag on cleaning up ordered extentsNaohiro Aota1-0/+12
Commit 524272607e88 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang") introduced btrfs_cleanup_ordered_extents() to cleanup submitted ordered extents. However, it does not clear the ordered bit (Private2) of corresponding pages. Thus, the following BUG occurs from free_pages_check_bad() (on btrfs/125 with nospace_cache). BUG: Bad page state in process btrfs pfn:3fa787 page:ffffdf2acfe9e1c0 count:0 mapcount:0 mapping: (null) index:0xd flags: 0x8000000000002008(uptodate|private_2) raw: 8000000000002008 0000000000000000 000000000000000d 00000000ffffffff raw: ffffdf2acf5c1b20 ffffb443802238b0 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x2000(private_2) This patch clears the flag same as other places calling btrfs_dec_test_ordered_pending() for every page in the specified range. Fixes: 524272607e88 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang") Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFOOmar Sandoval1-3/+3
fs_info->super_copy->{node,sector}size are little-endian, but the ioctl should return the values in native endianness. Use the cached values in btrfs_fs_info instead. Found with sparse. Fixes: 80a773fbfc2d ("btrfs: retrieve more info from FS_INFO ioctl") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: do not reset bio->bi_ops while writing bioLiu Bo1-3/+0
flush_epd_write_bio() sets bio->bi_opf by itself to honor REQ_SYNC, but it's not needed at all since bio->bi_opf has set up properly in both __extent_writepage() and write_one_eb(), and in the case of write_one_eb(), it also sets REQ_META, which we will lose in flush_epd_write_bio(). This remove this unnecessary bio->bi_opf setting. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-26Btrfs: use the new helper wbc_to_write_flagsLiu Bo1-3/+2
This updates btrfs to use the helper wbc_to_write_flags which has been applied in ext4/xfs/f2fs/block. Please note that, with this, btrfs's dirty pages written by a writeback job will carry the flag REQ_BACKGROUND, which is currently used by writeback-throttle to determine whether it should go to get a request or wait. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-14Merge branch 'work.read_write' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull nowait read support from Al Viro: "Support IOCB_NOWAIT for buffered reads and block devices" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: block_dev: support RFW_NOWAIT on block device nodes fs: support RWF_NOWAIT for buffered reads fs: support IOCB_NOWAIT in generic_file_buffered_read fs: pass iocb to do_generic_file_read
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds9-22/+21
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds1-14/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-14Merge branch 'zstd-minimal' of ↵Linus Torvalds11-4/+466
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull zstd support from Chris Mason: "Nick Terrell's patch series to add zstd support to the kernel has been floating around for a while. After talking with Dave Sterba, Herbert and Phillip, we decided to send the whole thing in as one pull request. zstd is a big win in speed over zlib and in compression ratio over lzo, and the compression team here at FB has gotten great results using it in production. Nick will continue to update the kernel side with new improvements from the open source zstd userland code. Nick has a number of benchmarks for the main zstd code in his lib/zstd commit: I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is 211,988,480 B large. Run the following commands for the benchmark: sudo modprobe zstd_compress_test sudo mknod zstd_compress_test c 245 0 sudo cp silesia.tar zstd_compress_test The time is reported by the time of the userland `cp`. The MB/s is computed with 1,536,217,008 B / time(buffer size, hash) which includes the time to copy from userland. The Adjusted MB/s is computed with 1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)). The memory reported is the amount of memory the compressor requests. | Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) | |----------|----------|----------|-------|---------|----------|----------| | none | 11988480 | 0.100 | 1 | 2119.88 | - | - | | zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 | | zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 | | zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 | | zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 | | zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 | | zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 | | zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 | | zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 | | zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 | | zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 | I benchmarked zstd decompression using the same method on the same machine. The benchmark file is located in the upstream zstd repo under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is the amount of memory required to decompress data compressed with the given compression level. If you know the maximum size of your input, you can reduce the memory usage of decompression irrespective of the compression level. | Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) | |----------|----------|---------|---------------|-------------| | none | 0.025 | 8479.54 | - | - | | zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 | | zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 | | zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 | | zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 | | zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 | | zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 | | zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 | | zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 | I ran a long series of tests and benchmarks on the btrfs side and the gains are very similar to the core benchmarks Nick ran" * 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: squashfs: Add zstd support btrfs: Add zstd support lib: Add zstd modules lib: Add xxhash module
2017-09-09Merge branch 'for-4.14' of ↵Linus Torvalds39-1409/+1502
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "The changes range through all types: cleanups, core chagnes, sanity checks, fixes, other user visible changes, detailed list below: - deprecated: user transaction ioctl - mount option ssd does not change allocation alignments - degraded read-write mount is allowed if all the raid profile constraints are met, now based on more accurate check - defrag: do not reset compression afterwards; the NOCOMPRESS flag can be now overriden by defrag - prep work for better extent reference tracking (related to the qgroup slowness with balance) - prep work for compression heuristics - memory allocation reductions (may help latencies on a loaded system) - better accounting for io waiting states - error handling improvements (removed BUGs) - added more sanity checks for shared refs - fix readdir vs pagefault deadlock under some circumstances - fix for 'no-hole' mode, certain combination of compressed and inline extents - send: fix emission of invalid clone operations - fixup file mode if setting acls fail - more fixes from fuzzing - oher cleanups" * 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits) btrfs: submit superblock io with REQ_META and REQ_PRIO btrfs: remove unnecessary memory barrier in btrfs_direct_IO btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent btrfs: pass fs_info to btrfs_del_root instead of tree_root Btrfs: add one more sanity check for shared ref type Btrfs: remove BUG_ON in __add_tree_block Btrfs: remove BUG() in add_data_reference Btrfs: remove BUG() in print_extent_item Btrfs: remove BUG() in btrfs_extent_inline_ref_size Btrfs: convert to use btrfs_get_extent_inline_ref_type Btrfs: add a helper to retrive extent inline ref type btrfs: scrub: simplify scrub worker initialization btrfs: scrub: clean up division in scrub_find_csum btrfs: scrub: clean up division in __scrub_mark_bitmap btrfs: scrub: use bool for flush_all_writes btrfs: preserve i_mode if __btrfs_set_acl() fails btrfs: Remove extraneous chunk_objectid variable btrfs: Remove chunk_objectid argument from btrfs_make_block_group btrfs: Remove extra parentheses from condition in copy_items() ...
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds6-37/+34
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-04btrfs: switch write_buf to kernel_writeChristoph Hellwig1-14/+4
Instead of playing with the addressing limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04fs: support RWF_NOWAIT for buffered readsChristoph Hellwig1-1/+5
This is based on the old idea and code from Milosz Tanski. With the aio nowait code it becomes mostly trivial now. Buffered writes continue to return -EOPNOTSUPP if RWF_NOWAIT is passed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-24Btrfs: fix blk_status_t/errno confusionOmar Sandoval5-60/+64
This fixes several instances of blk_status_t and bare errno ints being mixed up, some of which are real bugs. In the normal case, 0 matches BLK_STS_OK, so we don't observe any effects of the missing conversion, but in case of errors or passes through the repair/retry paths, the errors get mixed up. The changes were identified using 'sparse', we don't have reports of the buggy behaviour. Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig6-20/+22
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23btrfs: index check-integrity state hash by a dev_tChristoph Hellwig1-18/+13
We won't have the struct block_device available in the bio soon, so switch to the numerical dev_t instead of the block_device pointer for looking up the check-integrity state. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-22btrfs: submit superblock io with REQ_META and REQ_PRIODavid Sterba1-2/+3
The superblock is also metadata of the filesystem so the relevant IO should be tagged as such. We also tag it as high priority, as it's the last block committed for metadata from a given transaction. Any delays would effectively block the whole transaction, also blocking any other operation holding the device_list_mutex. Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: remove unnecessary memory barrier in btrfs_direct_IONikolay Borisov1-1/+0
Commit 38851cc19adb ("Btrfs: implement unlocked dio write") implemented unlocked dio write, allowing multiple dio writers to write to non-overlapping, and non-eof-extending regions. In doing so it also introduced a broken memory barrier. It is broken due to 2 things: 1. Memory barriers _MUST_ always be paired, this is clearly not the case here 2. Checkpatch actually produces a warning if a memory barrier is introduced that doesn't have a comment explaining how it's being paired. Specifically for inode::i_dio_count that's wrapped inside inode_dio_begin, there is no explicit barrier semantics attached, so removing is fine as the atomic is used in common the waiter/wakeup pattern. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ enhance changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extentNikolay Borisov1-7/+5
Currently this function is always called with the object id of the root key of the chunk_tree, which is always BTRFS_CHUNK_TREE_OBJECTID. So let's subsume it straight into the function itself. No functional change. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extentNikolay Borisov1-4/+4
THe function is always called with chunk_objectid set to BTRFS_FIRST_CHUNK_TREE_OBJECTID. Let's collapse the parameter in the function itself. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: pass fs_info to btrfs_del_root instead of tree_rootJeff Mahoney5-9/+9
btrfs_del_roots always uses the tree_root. Let's pass fs_info instead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: add one more sanity check for shared ref typeLiu Bo2-10/+46
Every shared ref has a parent tree block, which can be get from btrfs_extent_inline_ref_offset(). And the tree block must be aligned to the nodesize, so we'd know this inline ref is not valid if this block's bytenr is not aligned to the nodesize, in which case, most likely the ref type has been misused. This adds the above mentioned check and also updates print_extent_item() called by btrfs_print_leaf() to point out the invalid ref while printing the tree structure. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: remove BUG_ON in __add_tree_blockLiu Bo1-1/+11
The BUG_ON() can be triggered when the caller is processing an invalid extent inline ref, e.g. a shared data ref is offered instead of an extent data ref, such that it tries to find a non-existent tree block and then btrfs_search_slot returns 1 for no such item. This replaces the BUG_ON() with a WARN() followed by calling btrfs_print_leaf() to show more details about what's going on and returning -EINVAL to upper callers. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: remove BUG() in add_data_referenceLiu Bo1-1/+4
Now that we have a helper to report invalid value of extent inline ref type, we need to quit gracefully instead of throwing out a kernel panic. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: remove BUG() in print_extent_itemLiu Bo1-1/+4
btrfs_print_leaf() is used in btrfs_get_extent_inline_ref_type, so here we really want to print the invalid value of ref type instead of causing a kernel panic. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: remove BUG() in btrfs_extent_inline_ref_sizeLiu Bo1-1/+0
Now that btrfs_get_extent_inline_ref_type() can report if type is a valid one and all callers can gracefully deal with that, we don't need to crash here. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: convert to use btrfs_get_extent_inline_ref_typeLiu Bo3-10/+50
Since we have a helper which can do sanity check, this converts all btrfs_extent_inline_ref_type to it. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21Btrfs: add a helper to retrive extent inline ref typeLiu Bo2-0/+48
An invalid value of extent inline ref type may be read from a malicious image which may force btrfs to crash. This adds a helper which does sanity check for the ref type, so we can know if it's sane, return he type, otherwise return an error. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ minimal tweak const types, causing warnings due to other cleanup patches ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: scrub: simplify scrub worker initializationDavid Sterba1-8/+2
Minor simplification, merge calls to one. Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: scrub: clean up division in scrub_find_csumDavid Sterba1-1/+3
Use proper helpers for 64bit division. Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: scrub: clean up division in __scrub_mark_bitmapDavid Sterba1-2/+6
Use proper helpers for 64bit division and then cast to narrower type. Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: scrub: use bool for flush_all_writesDavid Sterba1-10/+8
flush_all_writes is an atomic but does not use the semantics at all, it's just on/off indicator, we can use bool. Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: preserve i_mode if __btrfs_set_acl() failsErnesto A. Fernández1-1/+5
When changing a file's acl mask, btrfs_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by restoring the original mode bits if __btrfs_set_acl fails. Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove extraneous chunk_objectid variableNikolay Borisov1-10/+6
BTRFS_FIRST_CHUNK_TREE_OBJECTIS id the only objectid being used in the chunk_tree. So remove a variable which is always set to that value and collapse its usage in callees which are passed this variable. No functional changes Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove chunk_objectid argument from btrfs_make_block_groupNikolay Borisov3-8/+5
btrfs_make_block_group is always called with chunk_objectid set to BTRFS_FIRST_CHUNK_TREE_OBJECTID. There's no reason why this behavior will change anytime soon, so let's remove the argument and decrease the cognitive load when reading the code path. No functional change Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove extra parentheses from condition in copy_items()Matthias Kaehlcke1-1/+1
There is no need for the extra pair of parentheses, remove it. This fixes the following warning when building with clang: fs/btrfs/tree-log.c:3694:10: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((i == (nr - 1))) ~~^~~~~~~~~~~ Also remove the unnecessary parentheses around the substraction. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove redundant setting of uuid in btrfs_block_headerNikolay Borisov1-2/+0
btrfs_alloc_dev_extent currently unconditionally sets the uuid in the leaf block header the function is working with. This is unnecessary since this operation is peformed by the core btree handling code (splitting a node, allocating a new btree block etc). So let's remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 21:23:38 +0000