summaryrefslogtreecommitdiffstats
path: root/fs/btrfs/disk-io.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-25btrfs: properly track when rescan worker is runningJeff Mahoney1-0/+1
The qgroup_flags field is overloaded such that it reflects the on-disk status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN flag is used to indicate that a rescan operation is in progress, but if the file system is unmounted while a rescan is running, the rescan operation is paused. If the file system is then mounted read-only, the flag will still be present but the rescan operation will not have been resumed. When we go to umount, btrfs_qgroup_wait_for_completion will see the flag and interpret it to mean that the rescan worker is still running and will wait for a completion that will never come. This patch uses a separate flag to indicate when the worker is running. The locking and state surrounding the qgroup rescan worker needs a lot of attention beyond this patch but this is enough to avoid a hung umount. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by; Jeff Mahoney <jeffm@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: fix memory leak of reloc_rootLiu Bo1-1/+8
When some critical errors occur and FS would be flipped into RO, if we have an on-going balance, we can end up with a memory leak of root->reloc_root since btrfs_drop_snapshots() bails out without freeing reloc_root at the very early start. However, we're not able to free reloc_root in btrfs_drop_snapshots() because its caller, merge_reloc_roots(), still needs to access it to cleanup reloc_root's rbtree. This makes us free reloc_root when we're going to free fs/file roots. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe1-1/+1
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04Merge branch 'for-linus-4.8' of ↵Linus Torvalds1-47/+54
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull more btrfs updates from Chris Mason: "This is part two of my btrfs pull, which is some cleanups and a batch of fixes. Most of the code here is from Jeff Mahoney, making the pointers we pass around internally more consistent and less confusing overall. I noticed a small problem right before I sent this out yesterday, so I fixed it up and re-tested overnight" * 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (40 commits) Btrfs: fix __MAX_CSUM_ITEMS btrfs: btrfs_abort_transaction, drop root parameter btrfs: add btrfs_trans_handle->fs_info pointer btrfs: btrfs_relocate_chunk pass extent_root to btrfs_end_transaction btrfs: convert nodesize macros to static inlines btrfs: introduce BTRFS_MAX_ITEM_SIZE btrfs: cleanup, remove prototype for btrfs_find_root_ref btrfs: copy_to_sk drop unused root parameter btrfs: simpilify btrfs_subvol_inherit_props btrfs: tests, use BTRFS_FS_STATE_DUMMY_FS_INFO instead of dummy root btrfs: tests, require fs_info for root btrfs: tests, move initialization into tests/ btrfs: btrfs_test_opt and friends should take a btrfs_fs_info btrfs: prefix fsid to all trace events btrfs: plumb fs_info into btrfs_work btrfs: remove obsolete part of comment in statfs btrfs: hide test-only member under ifdef btrfs: Ratelimit "no csum found" info message btrfs: Add ratelimit to btrfs printing Btrfs: fix unexpected balance crash due to BUG_ON ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-24/+19
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-26btrfs: tests, use BTRFS_FS_STATE_DUMMY_FS_INFO instead of dummy rootJeff Mahoney1-2/+1
Now that we have a dummy fs_info associated with each test that uses a root, we don't need the DUMMY_ROOT bit anymore. This lets us make choices without needing an actual root like in e.g. btrfs_find_create_tree_block. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26btrfs: tests, require fs_info for rootJeff Mahoney1-5/+10
This allows the upcoming patchset to push nodesize and sectorsize into fs_info. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26btrfs: btrfs_test_opt and friends should take a btrfs_fs_infoJeff Mahoney1-11/+11
btrfs_test_opt and friends only use the root pointer to access the fs_info. Let's pass the fs_info directly in preparation to eliminate similar patterns all over btrfs. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26btrfs: plumb fs_info into btrfs_workJeff Mahoney1-19/+28
In order to provide an fsid for trace events, we'll need a btrfs_fs_info pointer. The most lightweight way to do that for btrfs_work structures is to associate it with the __btrfs_workqueue structure. Each queued btrfs_work structure has a workqueue associated with it, so that's a natural fit. It's a privately defined structures, so we add accessors to retrieve the fs_info pointer. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26btrfs: Fix slab accounting flagsNikolay Borisov1-1/+1
BTRFS is using a variety of slab caches to satisfy internal needs. Those slab caches are always allocated with the SLAB_RECLAIM_ACCOUNT, meaning allocations from the caches are going to be accounted as SReclaimable. At the same time btrfs is not registering any shrinkers whatsoever, thus preventing memory from the slabs to be shrunk. This means those caches are not in fact reclaimable. To fix this remove the SLAB_RECLAIM_ACCOUNT on all caches apart from the inode cache, since this one is being freed by the generic VFS super_block shrinker. Also set the transaction related caches as SLAB_TEMPORARY, to better document the lifetime of the objects (it just translates to SLAB_RECLAIM_ACCOUNT). Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26Btrfs: fix double free of fs rootLiu Bo1-9/+3
I got this warning while mounting a btrfs image, [ 3020.509606] ------------[ cut here ]------------ [ 3020.510107] WARNING: CPU: 3 PID: 5581 at lib/idr.c:1051 ida_remove+0xca/0x190 [ 3020.510853] ida_remove called for id=42 which is not allocated. [ 3020.511466] Modules linked in: [ 3020.511802] CPU: 3 PID: 5581 Comm: mount Not tainted 4.7.0-rc5+ #274 [ 3020.512438] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 [ 3020.513385] 0000000000000286 0000000021295d86 ffff88006c66b8f0 ffffffff8182ba5a [ 3020.514153] 0000000000000000 0000000000000009 ffff88006c66b930 ffffffff810e0ed7 [ 3020.514928] 0000041b00000000 ffffffff8289a8c0 ffff88007f437880 0000000000000000 [ 3020.515717] Call Trace: [ 3020.515965] [<ffffffff8182ba5a>] dump_stack+0xc9/0x13f [ 3020.516487] [<ffffffff810e0ed7>] __warn+0x147/0x160 [ 3020.517005] [<ffffffff810e0f4f>] warn_slowpath_fmt+0x5f/0x80 [ 3020.517572] [<ffffffff8182e6ca>] ida_remove+0xca/0x190 [ 3020.518075] [<ffffffff813a2bcc>] free_anon_bdev+0x2c/0x60 [ 3020.518609] [<ffffffff81657a9f>] free_fs_root+0x13f/0x160 [ 3020.519138] [<ffffffff8165c679>] btrfs_get_fs_root+0x379/0x3d0 [ 3020.519710] [<ffffffff81e6e975>] ? __mutex_unlock_slowpath+0x155/0x2c0 [ 3020.520366] [<ffffffff816615b1>] open_ctree+0x2e91/0x3200 [ 3020.520965] [<ffffffff8161ede2>] btrfs_mount+0x1322/0x15b0 [ 3020.521536] [<ffffffff81e60e74>] ? kmemleak_alloc_percpu+0x44/0x170 [ 3020.522167] [<ffffffff8115f5e1>] ? lockdep_init_map+0x61/0x210 [ 3020.522780] [<ffffffff813a4f59>] mount_fs+0x49/0x2c0 [ 3020.523305] [<ffffffff813d840c>] vfs_kern_mount+0xac/0x1b0 [ 3020.523872] [<ffffffff8161dee1>] btrfs_mount+0x421/0x15b0 [ 3020.524402] [<ffffffff81e60e74>] ? kmemleak_alloc_percpu+0x44/0x170 [ 3020.525045] [<ffffffff8115f5e1>] ? lockdep_init_map+0x61/0x210 [ 3020.525657] [<ffffffff8115f5e1>] ? lockdep_init_map+0x61/0x210 [ 3020.526289] [<ffffffff813a4f59>] mount_fs+0x49/0x2c0 [ 3020.526803] [<ffffffff813d840c>] vfs_kern_mount+0xac/0x1b0 [ 3020.527365] [<ffffffff813dc27a>] do_mount+0x41a/0x1770 [ 3020.527899] [<ffffffff812e800d>] ? strndup_user+0x6d/0xc0 [ 3020.528447] [<ffffffff812e7f68>] ? memdup_user+0x78/0xb0 [ 3020.528987] [<ffffffff813ddad0>] SyS_mount+0x150/0x160 [ 3020.529493] [<ffffffff81e72b7c>] entry_SYSCALL_64_fastpath+0x1f/0xbd It turns out that we free fs root twice, btrfs_init_fs_root() calls free_anon_bdev(root->anon_dev) and later then btrfs_get_fs_root() cals free_fs_root which does another free_anon_bdev() and it ends up with the above warning. Instead of reset root->anon_dev to 0 after free_anon_bdev(), we can let btrfs_init_fs_root() return directly since its callers have already done the free job by calling free_fs_root(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-23Btrfs: Force stripesize to the value of sectorsizeChandan Rajendra1-4/+2
Btrfs code currently assumes stripesize to be same as sectorsize. However Btrfs-progs (until commit df05c7ed455f519e6e15e46196392e4757257305) has been setting btrfs_super_block->stripesize to a value of 4096. This commit makes sure that the value of btrfs_super_block->stripesize is a power of 2. Later, it unconditionally sets btrfs_root->stripesize to sectorsize. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-06-17Btrfs: btrfs_check_super_valid: Allow 4096 as stripesizeChandan Rajendra1-1/+2
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence restricting stripesize to be equal to sectorsize would cause super block validation to return an error on architectures where PAGE_SIZE is not equal to 4096. Hence as a workaround, this commit allows stripesize to be set to 4096 bytes. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17btrfs: avoid blocking open_ctree from cleaner_kthreadZygo Blaxell1-15/+10
This fixes a problem introduced in commit 2f3165ecf103599f82bf0ea254039db335fb5005 "btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes". open_ctree eventually calls btrfs_replay_log which in turn calls btrfs_commit_super which tries to lock the cleaner_mutex, causing a recursive mutex deadlock during mount. Instead of playing whack-a-mole trying to keep up with all the functions that may want to lock cleaner_mutex, put all the cleaner_mutex lockers back where they were, and attack the problem more directly: keep cleaner_kthread asleep until the filesystem is mounted. When filesystems are mounted read-only and later remounted read-write, open_ctree did not set fs_info->open and neither does anything else. Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs nor cleaner_kthread get confused by the common case of "/" filesystem read-only mount followed by read-write remount. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17Btrfs: check if extent buffer is aligned to sectorsizeLiu Bo1-4/+4
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer via alloc_extent_buffer(). An unaligned eb can have more pages than it should have, which ends up extent buffer's leak or some corrupted content in extent buffer. This adds a warning to let us quickly know what was happening. Now that alloc_extent_buffer() no more returns NULL, this changes its caller and callers of its caller to match with the new error handling. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-08Merge branch 'misc-fixes-4.7' of ↵Chris Mason1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
2016-06-07btrfs: use bio fields for op and flagsMike Christie1-18/+12
The bio REQ_OP and bi_rw rq_flag_bits are now always setup, so there is no need to pass around the rq_flag_bits bits too. btrfs users should should access the bio insead. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07btrfs: use bio op accessorsMike Christie1-4/+4
This should be the easier cases to convert btrfs to bio_set_op_attrs/bio_op. They are mostly just cut and replace type of changes. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie1-2/+2
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie1-1/+2
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-06Btrfs: self-tests: Use macros instead of constants and add missing newlineFeifei Xu1-1/+2
This commit replaces numerical constants with appropriate preprocessor macros. Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-06Btrfs: add more validation checks for superblockLiu Bo1-0/+11
This adds validation checks for super_total_bytes, super_bytes_used and super_stripesize, super_num_devices. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-02Btrfs: self-tests: Support non-4k page sizeFeifei Xu1-3/+5
self-tests code assumes 4k as the sectorsize and nodesize. This commit fix hardcoded 4K. Enables the self-tests code to be executed on non-4k page sized systems (e.g. ppc64). Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-25Merge branch 'cleanups-4.7' into for-chris-4.7-20160525David Sterba1-7/+7
2016-05-25btrfs: fix string and comment grammatical issues and typosNicholas D Steeves1-5/+5
Signed-off-by: Nicholas D Steeves <nsteeves@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-16Merge branch 'cleanups-4.7' into for-chris-4.7-20160516David Sterba1-57/+55
2016-05-10btrfs: GFP_NOFS does not GFP_HIGHMEMDavid Sterba1-1/+1
Masking HIGHMEM out of NOFS does not make sense. Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-10btrfs: switch to common message helpers in open_ctree, adjust messagesDavid Sterba1-52/+50
Currently we lack the identification of the filesystem in most if not all mount messages, done via printk/pr_* functions. We can use the btrfs_* helpers in open_ctree, as the fs_info <-> sb link is established at the beginning of the function. The messages have been updated at the same time to be more consistent: * dropped sb->s_id, as it's not available via btrfs_* * added %d for return code where appropriate * wording changed * %Lx replaced by %llx Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06btrfs: don't force mounts to wait for cleaner_kthread to delete one or more ↵Zygo Blaxell1-3/+15
subvolumes During a mount, we start the cleaner kthread first because the transaction kthread wants to wake up the cleaner kthread. We start the transaction kthread next because everything in btrfs wants transactions. We do reloc recovery in the thread that was doing the original mount call once the transaction kthread is running. This means that the cleaner kthread could already be running when reloc recovery happens (e.g. if a snapshot delete was started before a crash). Relocation does not play well with the cleaner kthread, so a mutex was added in commit 5f3164813b90f7dbcb5c3ab9006906222ce471b7 "Btrfs: fix race between balance recovery and root deletion" to prevent both from being active at the same time. If the cleaner kthread is already holding the mutex by the time we get to btrfs_recover_relocation, the mount will be blocked until at least one deleted subvolume is cleaned (possibly more if the mount process doesn't get the lock right away). During this time (which could be an arbitrarily long time on a large/slow filesystem), the mount process is stuck and the filesystem is unnecessarily inaccessible. Fix this by locking cleaner_mutex before we start cleaner_kthread, and unlocking the mutex after mount no longer requires it. This ensures that the mounting process will not be blocked by the cleaner kthread. The cleaner kthread is already prepared for mutex contention and will just go to sleep until the mutex is available. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29btrfs: sink gfp parameter to clear_extent_dirtyDavid Sterba1-1/+1
Callers pass GFP_NOFS. No need to pass the flags around. Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29btrfs: sink gfp parameter to clear_extent_bitsDavid Sterba1-1/+1
Callers pass GFP_NOFS and GFP_KERNEL. No need to pass the flags around. Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-28btrfs: rename btrfs_std_error to btrfs_handle_fs_errorAnand Jain1-4/+4
btrfs_std_error() handles errors, puts FS into readonly mode (as of now). So its good idea to rename it to btrfs_handle_fs_error(). Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ edit changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-04Merge branch 'PAGE_CACHE_SIZE-removal'Linus Torvalds1-7/+7
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov: "PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. Let's stop pretending that pages in page cache are special. They are not. The first patch with most changes has been done with coccinelle. The second is manual fixups on top. The third patch removes macros definition" [ I was planning to apply this just before rc2, but then I spaced out, so here it is right _after_ rc2 instead. As Kirill suggested as a possibility, I could have decided to only merge the first two patches, and leave the old interfaces for compatibility, but I'd rather get it all done and any out-of-tree modules and patches can trivially do the converstion while still also working with older kernels, so there is little reason to try to maintain the redundant legacy model. - Linus ] * PAGE_CACHE_SIZE-removal: mm: drop PAGE_CACHE_* and page_cache_{get,release} definition mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-7/+7
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01Merge branch 'for-linus-4.6' of ↵Linus Torvalds1-20/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has a few fixes Dave Sterba had queued up. These are all pretty small, but since they were tested I decided against waiting for more" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: transaction_kthread() is not freezable btrfs: cleaner_kthread() doesn't need explicit freeze btrfs: do not write corrupted metadata blocks to disk btrfs: csum_tree_block: return proper errno value
2016-03-24Merge branch 'misc-4.6' of ↵Chris Mason1-20/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.6
2016-03-22btrfs: transaction_kthread() is not freezableJiri Kosina1-9/+6
transaction_kthread() is calling try_to_freeze(), but that's just an expeinsive no-op given the fact that the thread is not marked freezable. After removing this, disk-io.c is now independent on freezer API. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-22btrfs: cleaner_kthread() doesn't need explicit freezeJiri Kosina1-1/+1
cleaner_kthread() is not marked freezable, and therefore calling try_to_freeze() in its context is a pointless no-op. In addition to that, as has been clearly demonstrated by 80ad623edd2d ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"), it's perfectly valid / legal for cleaner_kthread() to stay scheduled out in an arbitrary place during suspend (in that particular example that was waiting for reading of extent pages), so there is no need to leave any traces of freezer in this kthread. Fixes: 80ad623edd2d ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()") Fixes: 696249132158 ("btrfs: clear PF_NOFREEZE in cleaner_kthread()") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-22btrfs: do not write corrupted metadata blocks to diskAlex Lyakas1-2/+13
csum_dirty_buffer was issuing a warning in case the extent buffer did not look alright, but was still returning success. Let's return error in this case, and also add an additional sanity check on the extent buffer header. The caller up the chain may BUG_ON on this, for example flush_epd_write_bio will, but it is better than to have a silent metadata corruption on disk. Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-22btrfs: csum_tree_block: return proper errno valueAlex Lyakas1-8/+5
Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-21Merge branch 'for-linus-4.6' of ↵Linus Torvalds1-30/+41
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "We have a good sized cleanup of our internal read ahead code, and the first series of commits from Chandan to enable PAGE_SIZE > sectorsize Otherwise, it's a normal series of cleanups and fixes, with many thanks to Dave Sterba for doing most of the patch wrangling this time" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits) btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums btrfs: Fix misspellings in comments. btrfs: Print Warning only if ENOSPC_DEBUG is enabled btrfs: scrub: silence an uninitialized variable warning btrfs: move btrfs_compression_type to compression.h btrfs: rename btrfs_print_info to btrfs_print_mod_info Btrfs: Show a warning message if one of objectid reaches its highest value Documentation: btrfs: remove usage specific information btrfs: use kbasename in btrfsic_mount Btrfs: do not collect ordered extents when logging that inode exists Btrfs: fix race when checking if we can skip fsync'ing an inode Btrfs: fix listxattrs not listing all xattrs packed in the same item Btrfs: fix deadlock between direct IO reads and buffered writes Btrfs: fix extent_same allowing destination offset beyond i_size Btrfs: fix file loss on log replay after renaming a file and fsync Btrfs: fix unreplayable log after snapshot delete + parent dir fsync Btrfs: fix lockdep deadlock warning due to dev_replace btrfs: drop unused argument in btrfs_ioctl_get_supported_features btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls btrfs: change max_inline default to 2048 ...
2016-03-14btrfs: Fix misspellings in comments.Adam Buchbinder1-1/+1
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11btrfs: move btrfs_compression_type to compression.hAnand Jain1-0/+1
So that its better organized. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-26Merge branch 'cleanups-4.6' into for-chris-4.6David Sterba1-2/+1
2016-02-26Merge branch 'foreign/liubo/replace-lockup' into for-chris-4.6David Sterba1-2/+4
2016-02-26Merge branch 'foreign/zhaolei/reada' into for-chris-4.6David Sterba1-11/+12
2016-02-26Merge branch 'foreign/qu/norecovery-v7' into for-chris-4.6David Sterba1-4/+11
2016-02-23Btrfs: fix lockdep deadlock warning due to dev_replaceLiu Bo1-2/+4
Xfstests btrfs/011 complains about a deadlock warning, [ 1226.649039] ========================================================= [ 1226.649039] [ INFO: possible irq lock inversion dependency detected ] [ 1226.649039] 4.1.0+ #270 Not tainted [ 1226.649039] --------------------------------------------------------- [ 1226.652955] kswapd0/46 just changed the state of lock: [ 1226.652955] (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1226.652955] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1226.652955] other info that might help us debug this: [ 1226.652955] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1226.652955] Possible interrupt unsafe locking scenario: [ 1226.652955] CPU0 CPU1 [ 1226.652955] ---- ---- [ 1226.652955] lock(&fs_info->dev_replace.lock); [ 1226.652955] local_irq_disable(); [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] lock(&found->groups_sem); [ 1226.652955] <Interrupt> [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] *** DEADLOCK *** Commit 084b6e7c7607 ("btrfs: Fix a lockdep warning when running xfstest.") tried to fix a similar one that has the exactly same warning, but with that, we still run to this. The above lock chain comes from btrfs_commit_transaction ->btrfs_run_delayed_items ... ->__btrfs_update_delayed_inode ... ->__btrfs_cow_block ... ->find_free_extent ->cache_block_group ->load_free_space_cache ->btrfs_readpages ->submit_one_bio ... ->__btrfs_map_block ->btrfs_dev_replace_lock However, with high memory pressure, tasks which hold dev_replace.lock can be interrupted by kswapd and then kswapd is intended to release memory occupied by superblock, inodes and dentries, where we may call evict_inode, and it comes to [ 1226.652955] [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30 [ 1226.652955] [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700 delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads to a ABBA deadlock. To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but things are simpler here since we only needs read's spinlock to blocking lock. With this, btrfs/011 no more produces warnings in dmesg. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-18btrfs: drop null testing before destroy functionsKinglong Mee1-2/+1
Cleanup. kmem_cache_destroy has support NULL argument checking, so drop the double null testing before calling it. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-18btrfs: reada: limit max works countZhao Lei1-0/+1
Reada creates 2 works for each level of tree recursively. In case of a tree having many levels, the number of created works is 2^level_of_tree. Actually we don't need so many works in parallel, this patch limits max works to BTRFS_MAX_MIRRORS * 2. The per-fs works_counter will be also used for btrfs_reada_wait() to check is there are background workers. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>