summaryrefslogtreecommitdiffstats
path: root/fs/btrfs/compression.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-18btrfs: drop bio_set_dev where not neededDavid Sterba1-10/+0
bio_set_dev sets a bdev to a bio and is not only setting a pointer bug also changing some state bits if there was a different bdev set before. This is one thing that's not needed. Another thing is that setting a bdev at bio allocation time is too early and actually does not work with plain redundancy profiles, where each time we submit a bio to a device, the bdev is set correctly. In many places the bio bdev is set to latest_bdev that seems to serve as a stub pointer "just to put something to bio". But we don't have to do that. Where do we know which bdev to set: * for regular IO: submit_stripe_bio that's called by btrfs_map_bio * repair IO: repair_io_failure, read or write from specific device * super block write (using buffer_heads but uses raw bdev) and barriers * scrub: this does not use all regular IO paths as it needs to reach all copies, verify and fixup eventually, and for that all bdev management is independent * raid56: rbio_add_io_page, for the RMW write * integrity-checker: does it's own low-level block tracking Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: remove ops pointer from workspace_managerDavid Sterba1-4/+2
We can infer the ops from the type that is now passed to all functions that would need it, this makes workspace_manager::ops redundant and can be removed. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: inline free_workspaceDavid Sterba1-3/+18
Replace indirect calls to free_workspace by switch and calls to the specific callbacks. This is mainly to get rid of the indirection due to spectre vulnerability mitigations. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: pass type to btrfs_put_workspaceDavid Sterba1-7/+6
We can infer the workspace_manager from type and the type will be used in the following patch to call a common helper for free_workspace. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: inline alloc_workspaceDavid Sterba1-3/+18
Replace indirect calls to alloc_workspace by switch and calls to the specific callbacks. This is mainly to get rid of the indirection due to spectre vulnerability mitigations. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: pass type to btrfs_get_workspaceDavid Sterba1-7/+5
We can infer the workspace_manager from type and the type will be used in the following patch to call a common helper for alloc_workspace. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: inline put_workspaceDavid Sterba1-9/+15
Similar to get_workspace, majority of the callbacks is trivial, we don't gain anything by the indirection, so replace them by a switch function. Trivial callback implementations use the helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: inline get_workspaceDavid Sterba1-8/+15
Majority of the callbacks is trivial, we don't gain anything by the indirection, so replace them by a switch function. ZLIB needs to adjust level in the callback and ZSTD workspace management is complex, the rest is call to the helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: export alloc/free/get/put callbacks of all algosDavid Sterba1-0/+12
The indirect calls will be replaced by a switch in compression.c. (Switch is faster than indirect calls with when Spectre mitigations are enabled). Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: inline cleanup_workspace_managerDavid Sterba1-11/+6
Replace loop calling to all algos with a list of direct calls to the cleanup manager callback. When that becomes trivial it is replaced by direct call to the helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: let workspace manager cleanup take only the typeDavid Sterba1-2/+4
With the access to the workspace structures, we can look it up together with the compression ops inside the workspace manager cleanup helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: inline init_workspace_managerDavid Sterba1-11/+6
Replace loop calling to all algos with a list of direct calls to the init manager callback. When that becomes trivial it is replaced by direct call to the helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: let workspace manager init take only the typeDavid Sterba1-3/+4
With the access to the workspace structures, we can look it up together with the compression ops inside the workspace manager init helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: compression: attach workspace manager to the opsDavid Sterba1-0/+1
There's a lot of indirection when the generic code calls into algo-specific callbacks to reach the private workspace manager structure and back to the generic code. To simplify that, export the workspace manager for heuristic, LZO and ZLIB, while ZSTD is going to use it's own manager. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: switch compression callbacks to direct callsDavid Sterba1-8/+69
The indirect calls bring some overhead due to spectre vulnerability mitigations. The number of cases is small and below the threshold (10-20) where indirect call would be better. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: export compression and decompression callbacksDavid Sterba1-0/+24
Export compress_pages, decompress_bio and decompress callbacks for all compression algos. The indirect calls will be replaced by a switch. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: use better definition of number of compression typeChengguang Xu1-0/+2
The compression type upper limit constant is the same as the last value and this is confusing. In order to keep coding style consistent, use BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of 'NR' being one more than the last value. Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18Btrfs: use REQ_CGROUP_PUNT for worker thread submitted biosChris Mason1-1/+7
Async CRCs and compression submit IO through helper threads, which means they have IO priority inversions when cgroup IO controllers are in use. This flags all of the writes submitted by btrfs helper threads as REQ_CGROUP_PUNT. submit_bio() will punt these to dedicated per-blkcg work items to avoid the priority inversion. For the compression code, we take a reference on the wbc's blkg css and pass it down to the async workers. For the async CRCs, the bio already has the correct css, we just need to tell the block layer to use REQ_CGROUP_PUNT. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Chris Mason <clm@fb.com> Modified-and-reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18Btrfs: stop using btrfs_schedule_bio()Chris Mason1-4/+4
btrfs_schedule_bio() hands IO off to a helper thread to do the actual submit_bio() call. This has been used to make sure async crc and compression helpers don't get stuck on IO submission. To maintain good performance, over time the IO submission threads duplicated some IO scheduler characteristics such as high and low priority IOs and they also made some ugly assumptions about request allocation batch sizes. All of this cost at least one extra context switch during IO submission, and doesn't fit well with the modern blkmq IO stack. So, this commit stops using btrfs_schedule_bio(). We may need to adjust the number of async helper threads for crcs and compression, but long term it's a better path. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: move cond_wake_up functions out of ctreeDavid Sterba1-0/+1
The file ctree.h serves as a header for everything and has become quite bloated. Split some helpers that are generic and create a new file that should be the catch-all for code that's not btrfs-specific. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: compression: replace set_level callbacks by a common helperDavid Sterba1-2/+18
The set_level callbacks do not do anything special and can be replaced by a helper that uses the levels defined in the tables. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-02btrfs: lift bio_set_dev from bio allocation helpersDavid Sterba1-4/+8
The block device is passed around for the only purpose to set it in new bios. Move the assignment one level up. This is a preparatory patch for further bdev cleanups. Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-02btrfs: correctly validate compression typeJohannes Thumshirn1-0/+16
Nikolay reported the following KASAN splat when running btrfs/048: [ 1843.470920] ================================================================== [ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0 [ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979 [ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536 [ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1843.476322] Call Trace: [ 1843.476674] dump_stack+0x7c/0xbb [ 1843.477132] ? strncmp+0x66/0xb0 [ 1843.477587] print_address_description+0x114/0x320 [ 1843.478256] ? strncmp+0x66/0xb0 [ 1843.478740] ? strncmp+0x66/0xb0 [ 1843.479185] __kasan_report+0x14e/0x192 [ 1843.479759] ? strncmp+0x66/0xb0 [ 1843.480209] kasan_report+0xe/0x20 [ 1843.480679] strncmp+0x66/0xb0 [ 1843.481105] prop_compression_validate+0x24/0x70 [ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160 [ 1843.482509] __vfs_setxattr+0x71/0x90 [ 1843.483012] __vfs_setxattr_noperm+0x84/0x130 [ 1843.483606] vfs_setxattr+0xac/0xb0 [ 1843.484085] setxattr+0x18c/0x230 [ 1843.484546] ? vfs_setxattr+0xb0/0xb0 [ 1843.485048] ? __mod_node_page_state+0x1f/0xa0 [ 1843.485672] ? _raw_spin_unlock+0x24/0x40 [ 1843.486233] ? __handle_mm_fault+0x988/0x1290 [ 1843.486823] ? lock_acquire+0xb4/0x1e0 [ 1843.487330] ? lock_acquire+0xb4/0x1e0 [ 1843.487842] ? mnt_want_write_file+0x3c/0x80 [ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40 [ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70 [ 1843.489707] ? __sb_start_write+0x158/0x200 [ 1843.490278] ? mnt_want_write_file+0x3c/0x80 [ 1843.490855] ? __mnt_want_write+0x98/0xe0 [ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1843.493201] do_syscall_64+0x6c/0x230 [ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.495041] RIP: 0033:0x7fa7a8a7707a [ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48 [ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be [ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a [ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003 [ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000 [ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91 [ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff [ 1843.505268] Allocated by task 3979: [ 1843.505771] save_stack+0x19/0x80 [ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0 [ 1843.506836] setxattr+0xeb/0x230 [ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.507886] do_syscall_64+0x6c/0x230 [ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.509558] Freed by task 0: [ 1843.510188] (stack is not available) [ 1843.511309] The buggy address belongs to the object at ffff888111e369e0 which belongs to the cache kmalloc-8 of size 8 [ 1843.514095] The buggy address is located 2 bytes inside of 8-byte region [ffff888111e369e0, ffff888111e369e8) [ 1843.516524] The buggy address belongs to the page: [ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0 [ 1843.519993] flags: 0x4404000010200(slab|head) [ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300 [ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000 [ 1843.524281] page dumped because: kasan: bad access detected [ 1843.525936] Memory state around the buggy address: [ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc [ 1843.531877] ^ [ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.536468] ================================================================== This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read. Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values. Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01btrfs: remove assumption about csum type form btrfs_print_data_csum_error()Johannes Thumshirn1-2/+1
btrfs_print_data_csum_error() still assumed checksums to be 32 bit in size. Make it size agnostic. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01btrfs: directly call into crypto framework for checksummingJohannes Thumshirn1-6/+11
Currently btrfs_csum_data() relied on the crc32c() wrapper around the crypto framework for calculating the CRCs. As we have our own crypto_shash structure in the fs_info now, we can directly call into the crypto framework without going trough the wrapper. This way we can even remove the btrfs_csum_data() and btrfs_csum_final() wrappers. The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre: crc32c"), which was previously provided by LIBCRC32C config option doing the same. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01btrfs: don't assume compressed_bio sums to be 4 bytesJohannes Thumshirn1-10/+17
BTRFS has the implicit assumption that a checksum in compressed_bio is 4 bytes. While this is true for CRC32C, it is not for any other checksum. Change the data type to be a byte array and adjust loop index calculation accordingly. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01btrfs: don't assume ordered sums to be 4 bytesJohannes Thumshirn1-2/+2
BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums is 4 bytes. While this is true for CRC32C, it is not for any other checksum. Change the data type to be a byte array and adjust loop index calculation accordingly. This includes moving the adjustment of 'index' by 'ins_size' in btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum size, because before this patch the 'sums' member of 'struct btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one byte. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-05-20Merge tag 'for-5.2-rc1-tag' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Notable highlights: - fixes for some long-standing bugs in fsync that were quite hard to catch but now finaly fixed - some fixups to error handling paths that did not properly clean up (locking, memory) - fix to space reservation for inheriting properties" * tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: tree-checker: detect file extent items with overlapping ranges Btrfs: fix race between ranged fsync and writeback of adjacent ranges Btrfs: avoid fallback to transaction commit during fsync of files with holes btrfs: extent-tree: Fix a bug that btrfs is unable to add pinned bytes btrfs: sysfs: don't leak memory when failing add fsid btrfs: sysfs: Fix error path kobject memory leak Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path btrfs: use the existing reserved items for our first prop for inheritance btrfs: don't double unlock on error in btrfs_punch_hole btrfs: Check the compression level before getting a workspace
2019-05-07Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-03btrfs: Check the compression level before getting a workspaceJohnny Chang1-0/+1
When a file's compression property is set as zlib or zstd but leave the compression mount option not be set, that means btrfs will try to compress the file with default compression level. But in btrfs_compress_pages(), it calls get_workspace() with level = 0. This will return a workspace with a wrong compression level. For zlib, the compression level in the workspace will be 0 (that means "store only"). And for zstd, the compression in the workspace will be 1, not the default level 3. How to reproduce: mkfs -t btrfs /dev/sdb mount /dev/sdb /mnt/ mkdir /mnt/zlib btrfs property set /mnt/zlib/ compression zlib dd if=/dev/zero of=/mnt/zlib/compression-friendly-file-10M bs=1M count=10 sync btrfs-debugfs -f /mnt/zlib/compression-friendly-file-10M btrfs-debugfs output: * before: ... (258 9961472): ram 524288 disk 1106247680 disk_size 524288 file: ... extents 20 disk size 10485760 logical size 10485760 ratio 1.00 * after: ... (258 10354688): ram 131072 disk 14217216 disk_size 4096 file: ... extents 80 disk size 327680 logical size 10485760 ratio 32.00 The steps for zstd are similar, but need to put a debugging message to show the level of the return workspace in zstd_get_workspace(). This commit adds a check of the compression level before getting a workspace by set_level(). CC: stable@vger.kernel.org # 5.1+ Signed-off-by: Johnny Chang <johnnyc@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig1-2/+1
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-29btrfs: Use less confusing condition for uptodate parameter to ↵Nikolay Borisov1-1/+1
btrfs_writepage_endio_finish_ordered The uptodate parameter of btrfs_writepage_endio_finish_ordered is used to signal whether an error has occured while writing the given page. 0 signals an error, which is propagated to callees and 1 signifies success. In end_compressed_bio_write the ->bi_status is checked and based on it either BLK_STS_OK (0) or BLK_STS_NOTSUPP (1) are used. While from functional point of view this is ok it's a for the poor reader of the code, since the block layer values are conflated with the semantics of the parameter. Just use plain 0 or 1. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-08Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull block layer updates from Jens Axboe: "Not a huge amount of changes in this round, the biggest one is that we finally have Mings multi-page bvec support merged. Apart from that, this pull request contains: - Small series that avoids quiescing the queue for sysfs changes that match what we currently have (Aleksei) - Series of bcache fixes (via Coly) - Series of lightnvm fixes (via Mathias) - NVMe pull request from Christoph. Nothing major, just SPDX/license cleanups, RR mp policy (Hannes), and little fixes (Bart, Chaitanya). - BFQ series (Paolo) - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection for the fast path (Jianchao) - fops->iopoll() added for async IO polling, this is a feature that the upcoming io_uring interface will use (Christoph, me) - Partition scan loop fixes (Dongli) - mtip32xx conversion from managed resource API (Christoph) - cdrom registration race fix (Guenter) - MD pull from Song, two minor fixes. - Various documentation fixes (Marcos) - Multi-page bvec feature. This brings a lot of nice improvements with it, like more efficient splitting, larger IOs can be supported without growing the bvec table size, and so on. (Ming) - Various little fixes to core and drivers" * tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits) block: fix updating bio's front segment size block: Replace function name in string with __func__ nbd: propagate genlmsg_reply return code floppy: remove set but not used variable 'q' null_blk: fix checking for REQ_FUA block: fix NULL pointer dereference in register_disk fs: fix guard_bio_eod to check for real EOD errors blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map block: optimize bvec iteration in bvec_iter_advance block: introduce mp_bvec_for_each_page() for iterating over page block: optimize blk_bio_segment_split for single-page bvec block: optimize __blk_segment_map_sg() for single-page bvec block: introduce bvec_nth_page() iomap: wire up the iopoll method block: add bio_set_polled() helper block: wire up block device iopoll method fs: add an iopoll method to struct file_operations loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part() loop: do not print warn message if partition scan is successful block: bounce: make sure that bvec table is updated ...
2019-02-25btrfs: change set_level() to bound the level passed inDennis Zhou1-8/+17
Currently, the only user of set_level() is zlib which sets an internal workspace parameter. As level is now plumbed into get_workspace(), this can be handled there rather than separately. This repurposes set_level() to bound the level passed in so it can be used when setting the mounts compression level and as well as verifying the level before getting a workspace. The other benefit is this divides the meaning of compress(0) and get_workspace(0). The former means we want to use the default compression level of the compression type. The latter means we can use any workspace available. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: plumb level through the compression interfaceDennis Zhou1-15/+16
Zlib compression supports multiple levels, but doesn't require changing in how a workspace itself is created and managed. Zstd introduces a different memory requirement such that higher levels of compression require more memory. This requires changes in how the alloc()/get() methods work for zstd. This pach plumbs compression level through the interface as a parameter in preparation for zstd compression levels. This gives the compression types opportunity to create/manage based on the compression level. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: move to function pointers for get/put workspacesDennis Zhou1-45/+56
The previous patch added generic helpers for get_workspace() and put_workspace(). Now, we can migrate ownership of the workspace_manager to be in the compression type code as the compression code itself doesn't care beyond being able to get a workspace. The init/cleanup and get/put methods are abstracted so each compression algorithm can decide how they want to manage their workspaces. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: add compression interface in (get/put)_workspaceDennis Zhou1-23/+34
There are two levels of workspace management. First, alloc()/free() which are responsible for actually creating and destroy workspaces. Second, at a higher level, get()/put() which is the compression code asking for a workspace from a workspace_manager. The compression code shouldn't really care how it gets a workspace, but that it got a workspace. This adds get_workspace() and put_workspace() to be the higher level interface which is responsible for indexing into the appropriate compression type. It also introduces btrfs_put_workspace() and btrfs_get_workspace() to be the generic implementations of the higher interface. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: add helper methods for workspace manager init and cleanupDennis Zhou1-39/+43
Workspace manager init and cleanup code is open coded inside a for loop over the compression types. This forces each compression type to rely on the same workspace manager implementation. This patch creates helper methods that will be the generic implementation for btrfs workspace management. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: unify compression ops with workspace_managerDennis Zhou1-4/+7
Make the workspace_manager own the interface operations rather than managing index-paired arrays for the workspace_manager and compression operations. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: manage heuristic workspace as index 0Dennis Zhou1-82/+30
While the heuristic workspaces aren't really compression workspaces, they use the same interface for managing them. So rather than branching, let's just handle them once again as the index 0 compression type. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: rename workspaces_list to workspace_managerDennis Zhou1-23/+23
This is in preparation for zstd compression levels. As each level will require different size of workspace, workspaces_list is no longer a really fitting name. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-25btrfs: add helpers for compression type and levelDennis Zhou1-1/+1
It is very easy to miss places that rely on a certain bitshifting for decoding the type_level overloading. Add helpers to do this instead. Cc: Omar Sandoval <osandov@osandov.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-15block: allow bio_for_each_segment_all() to iterate over multi-page bvecMing Lei1-1/+2
This patch introduces one extra iterator variable to bio_for_each_segment_all(), then we can allow bio_for_each_segment_all() to iterate over multi-page bvec. Given it is just one mechannical & simple change on all bio_for_each_segment_all() users, this patch does tree-wide change in one single patch, so that we can avoid to use a temporary helper for this conversion. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17btrfs: Fix typos in comments and stringsAndrea Gelmini1-2/+2
The typos accumulate over time so once in a while time they get fixed in a large patch. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: use PAGE_ALIGNED instead of open-coding itJohannes Thumshirn1-1/+1
When using a 'var & (PAGE_SIZE - 1)' construct one is checking for a page alignment and thus should use the PAGE_ALIGNED() macro instead of open-coding it. Convert all open-coded occurrences of PAGE_ALIGNED(). Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: use offset_in_page instead of open-coding itJohannes Thumshirn1-1/+1
Constructs like 'var & (PAGE_SIZE - 1)' or 'var & ~PAGE_MASK' can denote an offset into a page. So replace them by the offset_in_page() macro instead of open-coding it if they're not used as an alignment check. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: Refactor btrfs_merge_bio_hookNikolay Borisov1-3/+4
This function really checks whether adding more data to the bio will straddle a stripe/chunk. So first let's give it a more appropraite name - btrfs_bio_fits_in_stripe. Secondly, the offset parameter was never used to just remove it. Thirdly, pages are submitted to either btree or data inodes so it's guaranteed that tree->ops is set so replace the check with an ASSERT. Finally, document the parameters of the function. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: Remove unused extent_state argument from ↵Nikolay Borisov1-1/+1
btrfs_writepage_endio_finish_ordered This parameter was never used, yet was part of the interface of the function ever since its introduction as extent_io_ops::writepage_end_io_hook in e6dcd2dc9c48 ("Btrfs: New data=ordered implementation"). Now that NULL is passed everywhere as a value for this parameter let's remove it for good. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: Remove extent_io_ops::writepage_end_io_hookNikolay Borisov1-8/+3
This callback is ony ever called for data page writeout so there is no need to actually abstract it via extent_io_ops. Lets just export it, remove the definition of the callback and call it directly in the functions that invoke the callback. Also rename the function to btrfs_writepage_endio_finish_ordered since what it really does is account finished io in the ordered extent data structures. No functional changes. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-10-28Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-4/+2
Pull XArray conversion from Matthew Wilcox: "The XArray provides an improved interface to the radix tree data structure, providing locking as part of the API, specifying GFP flags at allocation time, eliminating preloading, less re-walking the tree, more efficient iterations and not exposing RCU-protected pointers to its users. This patch set 1. Introduces the XArray implementation 2. Converts the pagecache to use it 3. Converts memremap to use it The page cache is the most complex and important user of the radix tree, so converting it was most important. Converting the memremap code removes the only other user of the multiorder code, which allows us to remove the radix tree code that supported it. I have 40+ followup patches to convert many other users of the radix tree over to the XArray, but I'd like to get this part in first. The other conversions haven't been in linux-next and aren't suitable for applying yet, but you can see them in the xarray-conv branch if you're interested" * 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits) radix tree: Remove multiorder support radix tree test: Convert multiorder tests to XArray radix tree tests: Convert item_delete_rcu to XArray radix tree tests: Convert item_kill_tree to XArray radix tree tests: Move item_insert_order radix tree test suite: Remove multiorder benchmarking radix tree test suite: Remove __item_insert memremap: Convert to XArray xarray: Add range store functionality xarray: Move multiorder_check to in-kernel tests xarray: Move multiorder_shrink to kernel tests xarray: Move multiorder account test in-kernel radix tree test suite: Convert iteration test to XArray radix tree test suite: Convert tag_tagged_items to XArray radix tree: Remove radix_tree_clear_tags radix tree: Remove radix_tree_maybe_preload_order radix tree: Remove split/join code radix tree: Remove radix_tree_update_node_t page cache: Finish XArray conversion dax: Convert page fault handlers to XArray ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:40:24 +0000