summaryrefslogtreecommitdiffstats
path: root/fs/binfmt_misc.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-13fs/binfmt_misc.c: node could be NULL when evicting inodeEryu Guan1-1/+1
inode->i_private is assigned by a Node pointer only after registering a new binary format, so it could be NULL if inode was created by bm_fill_super() (or iput() was called by the error path in bm_register_write()), and this could result in NULL pointer dereference when evicting such an inode. e.g. mount binfmt_misc filesystem then umount it immediately: mount -t binfmt_misc binfmt_misc /proc/sys/fs/binfmt_misc umount /proc/sys/fs/binfmt_misc will result in BUG: unable to handle kernel NULL pointer dereference at 0000000000000013 IP: bm_evict_inode+0x16/0x40 [binfmt_misc] ... Call Trace: evict+0xd3/0x1a0 iput+0x17d/0x1d0 dentry_unlink_inode+0xb9/0xf0 __dentry_kill+0xc7/0x170 shrink_dentry_list+0x122/0x280 shrink_dcache_parent+0x39/0x90 do_one_tree+0x12/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_litter_super+0x29/0x40 deactivate_locked_super+0x43/0x70 deactivate_super+0x45/0x60 cleanup_mnt+0x3f/0x70 __cleanup_mnt+0x12/0x20 task_work_run+0x86/0xa0 exit_to_usermode_loop+0x6d/0x99 syscall_return_slowpath+0xba/0xf0 entry_SYSCALL_64_fastpath+0xa3/0xa Fix it by making sure Node (e) is not NULL. Link: http://lkml.kernel.org/r/20171010100642.31786-1-eguan@redhat.com Fixes: 83f918274e4b ("exec: binfmt_misc: shift filp_close(interp_file) from kill_node() to bm_evict_inode()") Signed-off-by: Eryu Guan <eguan@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] arrayOleg Nesterov1-9/+5
After the previous change "fmt" can't go away, we can kill iname/iname_addr and use fmt->interpreter. Link: http://lkml.kernel.org/r/20170922143653.GA17232@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ben Woodard <woodard@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jim Foraker <foraker1@llnl.gov> Cc: <tdhooge@llnl.gov> Cc: Travis Gummels <tgummels@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03exec: binfmt_misc: fix race between load_misc_binary() and kill_node()Oleg Nesterov1-4/+8
load_misc_binary() makes a local copy of fmt->interpreter under entries_lock to avoid the race with kill_node() but this is not enough; the whole Node can be freed after we drop entries_lock, not only the ->interpreter string. Add dget/dput(fmt->dentry) to ensure bm_evict_inode() can't destroy/free this Node. Link: http://lkml.kernel.org/r/20170922143650.GA17227@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ben Woodard <woodard@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jim Foraker <foraker1@llnl.gov> Cc: Travis Gummels <tgummels@redhat.com> Cc: <tdhooge@llnl.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03exec: binfmt_misc: remove the confusing e->interp_file != NULL checksOleg Nesterov1-2/+2
If MISC_FMT_OPEN_FILE flag is set e->interp_file must be valid or we have a bug which should not be silently ignored. Link: http://lkml.kernel.org/r/20170922143647.GA17222@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ben Woodard <woodard@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jim Foraker <foraker1@llnl.gov> Cc: <tdhooge@llnl.gov> Cc: Travis Gummels <tgummels@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03exec: binfmt_misc: shift filp_close(interp_file) from kill_node() to ↵Oleg Nesterov1-6/+6
bm_evict_inode() To ensure that load_misc_binary() can't use the partially destroyed Node, see also the next patch. The current logic looks wrong in any case, once we close interp_file it doesn't make any sense to delay kfree(inode->i_private), this Node is no longer valid. Even if the MISC_FMT_OPEN_FILE/interp_file checks were not racy (they are), load_misc_binary() should not try to reopen ->interpreter if MISC_FMT_OPEN_FILE is set but ->interp_file is NULL. And I can't understand why do we use filp_close(), not fput(). Link: http://lkml.kernel.org/r/20170922143644.GA17216@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ben Woodard <woodard@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jim Foraker <foraker1@llnl.gov> Cc: <tdhooge@llnl.gov> Cc: Travis Gummels <tgummels@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03exec: binfmt_misc: don't nullify Node->dentry in kill_node()Oleg Nesterov1-13/+9
kill_node() nullifies/checks Node->dentry to avoid double free. This complicates the next changes and this is very confusing: - we do not need to check dentry != NULL under entries_lock, kill_node() is always called under inode_lock(d_inode(root)) and we rely on this inode_lock() anyway, without this lock the MISC_FMT_OPEN_FILE cleanup could race with itself. - if kill_inode() was already called and ->dentry == NULL we should not even try to close e->interp_file. We can change bm_entry_write() to simply check !list_empty(list) before kill_node. Again, we rely on inode_lock(), in particular it saves us from the race with bm_status_write(), another caller of kill_node(). Link: http://lkml.kernel.org/r/20170922143641.GA17210@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ben Woodard <woodard@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jim Foraker <foraker1@llnl.gov> Cc: <tdhooge@llnl.gov> Cc: Travis Gummels <tgummels@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04fs: fix kernel_read prototypeChristoph Hellwig1-1/+4
Use proper ssize_t and size_t types for the return value and count argument, move the offset last and make it an in/out argument like all other read/write helpers, and make the buf argument a void pointer to get rid of lots of casts in the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26fs: constify tree_descr arrays passed to simple_fill_super()Eric Biggers1-1/+1
simple_fill_super() is passed an array of tree_descr structures which describe the files to create in the filesystem's root directory. Since these arrays are never modified intentionally, they should be 'const' so that they are placed in .rodata and benefit from memory protection. This patch updates the function signature and all users, and also constifies tree_descr.name. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-02sched/headers: Prepare to remove the <linux/mm_types.h> dependency from ↵Ingo Molnar1-1/+1
<linux/sched.h> Update code that relied on sched.h including various MM types for them. This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-27fs: Replace current_fs_time() with current_time()Deepa Dinamani1-1/+1
current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-08-07Merge tag 'binfmt-for-linus' of ↵Linus Torvalds1-2/+39
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API
2016-05-29binfmt_misc: ->s_root is not going anywhereAl Viro1-8/+4
... no need to dget/dput it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-30binfmt_misc: add persistent opened binary handler for containersJames Bottomley1-2/+39
This patch adds a new flag 'F' to the binfmt handlers. If you pass in 'F' the binary that runs the emulation will be opened immediately and in future, will be cloned from the open file. The net effect is that the handler survives both changeroots and mount namespace changes, making it easy to work with foreign architecture containers without contaminating the container image with the emulator. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2016-01-22wrappers for ->i_mutex accessAl Viro1-6/+6
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-26Merge branch 'for-linus' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-17fs/binfmt_misc.c: simplify entry_status()Rasmus Villemoes1-21/+9
sprintf() reliably returns the number of characters printed, so we don't need to ask strlen() where we are. Also replace calling sprintf("%02x") in a loop with the much simpler bin2hex(). [akpm@linux-foundation.org: it's odd to include kernel.h after everything else] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15VFS: assorted weird filesystems: d_inode() annotationsDavid Howells1-8/+8
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-17unfuck binfmt_misc.c (broken by commit e6084d4)Al Viro1-4/+3
scanarg(s, del) never returns s; the empty field results in s + 1. Restore the correct checks, and move NUL-termination into scanarg(), while we are at it. Incidentally, mixing "coding style cleanups" (for small values of cleanup) with functional changes is a Bad Idea(tm)... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-13syscalls: implement execveat() system callDavid Drysdale1-0/+4
This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10fs/binfmt_misc.c: use GFP_KERNEL instead of GFP_USERAndrew Morton1-2/+2
GFP_USER means "honour cpuset nodes-allowed beancounting". These are regular old kernel objects and there seems no reason to give them this treatment. Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10binfmt_misc: clean up code style a bitMike Frysinger1-148/+145
Clean up various coding style issues that checkpatch complains about. No functional changes here. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10binfmt_misc: add comments & debug logsMike Frysinger1-15/+121
When trying to develop a custom format handler, the errors returned all effectively get bucketed as EINVAL with no kernel messages. The other errors (ENOMEM/EFAULT) are internal/obvious and basic. Thus any time a bad handler is rejected, the developer has to walk the dense code and try to guess where it went wrong. Needing to dive into kernel code is itself a fairly high barrier for a lot of people. To improve this situation, let's deploy extensive pr_debug markers at logical parse points, and add comments to the dense parsing logic. It let's you see exactly where the parsing aborts, the string the kernel received (useful when dealing with shell code), how it translated the buffers to binary data, and how it will apply the mask at runtime. Some example output: $ echo ':qemu-foo:M::\x7fELF\xAD\xAD\x01\x00:\xff\xff\xff\xff\xff\x00\xff\x00:/usr/bin/qemu-foo:POC' > register $ dmesg binfmt_misc: register: received 92 bytes binfmt_misc: register: delim: 0x3a {:} binfmt_misc: register: name: {qemu-foo} binfmt_misc: register: type: M (magic) binfmt_misc: register: offset: 0x0 binfmt_misc: register: magic[raw]: 5c 78 37 66 45 4c 46 5c 78 41 44 5c 78 41 44 5c \x7fELF\xAD\xAD\ binfmt_misc: register: magic[raw]: 78 30 31 5c 78 30 30 00 x01\x00. binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 66 66 5c 78 66 66 5c 78 66 66 \xff\xff\xff\xff binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 30 30 5c 78 66 66 5c 78 30 30 \xff\x00\xff\x00 binfmt_misc: register: mask[raw]: 00 . binfmt_misc: register: magic/mask length: 8 binfmt_misc: register: magic[decoded]: 7f 45 4c 46 ad ad 01 00 .ELF.... binfmt_misc: register: mask[decoded]: ff ff ff ff ff 00 ff 00 ........ binfmt_misc: register: magic[masked]: 7f 45 4c 46 ad 00 01 00 .ELF.... binfmt_misc: register: interpreter: {/usr/bin/qemu-foo} binfmt_misc: register: flag: P (preserve argv0) binfmt_misc: register: flag: O (open binary) binfmt_misc: register: flag: C (preserve creds) The [raw] lines show us exactly what was received from userspace. The lines after that show us how the kernel has decoded things. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10binfmt_misc: replace get_unused_fd() with get_unused_fd_flags(0)Yann Droneaud1-1/+1
This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14binfmt_misc: work around gcc-4.9 warningArnd Bergmann1-2/+2
gcc-4.9 on ARM gives us a mysterious warning about the binfmt_misc parse_command function: fs/binfmt_misc.c: In function 'parse_command.part.3': fs/binfmt_misc.c:405:7: warning: array subscript is above array bounds [-Warray-bounds] I've managed to trace this back to the ARM implementation of memset, which is called from copy_from_user in case of a fault and which does #define memset(p,v,n) \ ({ \ void *__p = (p); size_t __n = n; \ if ((__n) != 0) { \ if (__builtin_constant_p((v)) && (v) == 0) \ __memzero((__p),(__n)); \ else \ memset((__p),(v),(__n)); \ } \ (__p); \ }) Apparently gcc gets confused by the check for "size != 0" and believes that the size might be zero when it gets to the line that does "if (s[count-1] == '\n')", so it would access data outside of the array. gcc is clearly wrong here, since this condition was already checked earlier in the function and the 'size' value can not change in the meantime. Fortunately, we can work around it and get rid of the warning by rearranging the function to check for zero size after doing the copy_from_user. It is still safe to pass a zero size into copy_from_user, so it does not cause any side effects. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14binfmt_misc: expand the register format limit to 1920 bytesMike Frysinger1-2/+17
The current code places a 256 byte limit on the registration format. This ends up being fairly limited when you try to do matching against a binary format like ELF: - the magic & mask formats cannot have any embedded NUL chars (string_unescape_inplace halts at the first NUL) - each escape sequence quadruples the size: \x00 is needed for NUL - trying to match bytes at the start of the file as well as further on leads to a lot of \x00 sequences in the mask - magic & mask have to be the same length (when decoded) - still need bytes for the other fields - impossible! Let's look at a concrete (and common) example: using QEMU to run MIPS ELFs. The name field uses 11 bytes "qemu-mipsel". The interp uses 20 bytes "/usr/bin/qemu-mipsel". The type & flags takes up 4 bytes. We need 7 bytes for the delimiter (usually ":"). We can skip offset. So already we're down to 107 bytes to use with the magic/mask instead of the real limit of 128 (BINPRM_BUF_SIZE). If people use shell code to register (which they do the majority of the time), they're down to ~26 possible bytes since the escape sequence must be \x##. The ELF format looks like (both 32 & 64 bit): e_ident: 16 bytes e_type: 2 bytes e_machine: 2 bytes Those 20 bytes are enough for most architectures because they have so few formats in the first place, thus they can be uniquely identified. That also means for shell users, since 20 is smaller than 26, they can sanely register a handler. But for some targets (like MIPS), we need to poke further. The ELF fields continue on: e_entry: 4 or 8 bytes e_phoff: 4 or 8 bytes e_shoff: 4 or 8 bytes e_flags: 4 bytes We only care about e_flags here as that includes the bits to identify whether the ELF is O32/N32/N64. But now we have to consume another 16 bytes (for 32 bit ELFs) or 28 bytes (for 64 bit ELFs) just to match the flags. If every byte is escaped, we send 288 more bytes to the kernel ((20 {e_ident,e_type,e_machine} + 12 {e_entry,e_phoff,e_shoff} + 4 {e_flags}) * 2 {mask,magic} * 4 {escape}) and we've clearly blown our budget. Even if we try to be clever and do the decoding ourselves (rather than relying on the kernel to process \x##), we still can't hit the mark -- string_unescape_inplace treats mask & magic as C strings so NUL cannot be embedded. That leaves us with having to pass \x00 for the 12/24 entry/phoff/shoff bytes (as those will be completely random addresses), and that is a minimum requirement of 48/96 bytes for the mask alone. Add up the rest and we blow through it (this is for 64 bit ELFs): magic: 20 {e_ident,e_type,e_machine} + 24 {e_entry,e_phoff,e_shoff} + 4 {e_flags} = 48 # ^^ See note below. mask: 20 {e_ident,e_type,e_machine} + 96 {e_entry,e_phoff,e_shoff} + 4 {e_flags} = 120 Remember above we had 107 left over, and now we're at 168. This is of course the *best* case scenario -- you'll also want to have NUL bytes in the magic & mask too to match literal zeros. Note: the reason we can use 24 in the magic is that we can work off of the fact that for bytes the mask would clobber, we can stuff any value into magic that we want. So when mask is \x00, we don't need the magic to also be \x00, it can be an unescaped raw byte like '!'. This lets us handle more formats (barely) under the current 256 limit, but that's a pretty tall hoop to force people to jump through. With all that said, let's bump the limit from 256 bytes to 1920. This way we support escaping every byte of the mask & magic field (which is 1024 bytes by themselves -- 128 * 4 * 2), and we leave plenty of room for other fields. Like long paths to the interpreter (when you have source in your /really/long/homedir/qemu/foo). Since the current code stuffs more than one structure into the same buffer, we leave a bit of space to easily round up to 2k. 1920 is just as arbitrary as 256 ;). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03binfmt_misc: add missing 'break' statementLuis Henriques1-0/+1
A missing 'break' statement in bm_status_write() results in a user program receiving '3' when doing the following: write(fd, "-1", 2); Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30binfmt_misc: reuse string_unescape_inplace()Andy Shevchenko1-20/+4
There is string_unescape_inplace() function which decodes strings in generic way. Let's use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman1-0/+1
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-22new helper: file_inode(file)Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-20exec: do not leave bprm->interp on stackKees Cook1-1/+4
If a series of scripts are executed, each triggering module loading via unprintable bytes in the script header, kernel stack contents can leak into the command line. Normally execution of binfmt_script and binfmt_misc happens recursively. However, when modules are enabled, and unprintable bytes exist in the bprm->buf, execution will restart after attempting to load matching binfmt modules. Unfortunately, the logic in binfmt_script and binfmt_misc does not expect to get restarted. They leave bprm->interp pointing to their local stack. This means on restart bprm->interp is left pointing into unused stack memory which can then be copied into the userspace argv areas. After additional study, it seems that both recursion and restart remains the desirable way to handle exec with scripts, misc, and modules. As such, we need to protect the changes to interp. This changes the logic to require allocation for any changes to the bprm->interp. To avoid adding a new kmalloc to every exec, the default value is left as-is. Only when passing through binfmt_script or binfmt_misc does an allocation take place. For a proof of concept, see DoTest.sh from: http://www.halfdog.net/Security/2012/LinuxKernelBinfmtScriptStackDataDisclosure/ Signed-off-by: Kees Cook <keescook@chromium.org> Cc: halfdog <me@halfdog.net> Cc: P J P <ppandit@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17exec: use -ELOOP for max recursion depthKees Cook1-6/+0
To avoid an explosion of request_module calls on a chain of abusive scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon as maximum recursion depth is hit, the error will fail all the way back up the chain, aborting immediately. This also has the side-effect of stopping the user's shell from attempting to reexecute the top-level file as a shell script. As seen in the dash source: if (cmd != path_bshell && errno == ENOEXEC) { *argv-- = cmd; *argv = cmd = path_bshell; goto repeat; } The above logic was designed for running scripts automatically that lacked the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC, things continue to behave as the shell expects. Additionally, when tracking recursion, the binfmt handlers should not be involved. The recursion being tracked is the depth of calls through search_binary_handler(), so that function should be exclusively responsible for tracking the depth. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: halfdog <me@halfdog.net> Cc: P J P <ppandit@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-28get rid of pt_regs argument of ->load_binary()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28get rid of pt_regs argument of search_binary_handler()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-06vfs: Rename end_writeback() to clear_inode()Jan Kara1-1/+1
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-03-23magic.h: move some FS magic numbers into magic.hMuthu Kumar1-1/+2
- Move open-coded filesystem magic numbers into magic.h - Rearrange magic.h so that the filesystem-related constants are grouped together. Signed-off-by: Muthukumar R <muthur@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20__register_binfmt() made voidAl Viro1-5/+2
Just don't pass NULL to it - nobody does, anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06vfs: prefer ->dentry->d_sb to ->mnt->mnt_sbAl Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-02filesystems: add missing nlink wrappersMiklos Szeredi1-1/+1
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-07-20consolidate BINPRM_FLAGS_ENFORCE_NONDUMP handlingAl Viro1-2/+1
new helper: would_dump(bprm, file). Checks if we are allowed to read the file and if we are not - sets ENFORCE_NODUMP. Exported, used in places that previously open-coded the same logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_single() usersAl Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25fs: do not assign default i_ino in new_inodeChristoph Hellwig1-0/+1
Instead of always assigning an increasing inode number in new_inode move the call to assign it into those callers that actually need it. For now callers that need it is estimated conservatively, that is the call is added to all filesystems that do not assign an i_ino by themselves. For a few more filesystems we can avoid assigning any inode number given that they aren't user visible, and for others it could be done lazily when an inode number is actually needed, but that's left for later patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+3
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-09binfmt_misc: fix binfmt_misc priorityJan Sembera1-1/+1
Commit 74641f584da ("alpha: binfmt_aout fix") (May 2009) introduced a regression - binfmt_misc is now consulted after binfmt_elf, which will unfortunately break ia32el. ia32 ELF binaries on ia64 used to be matched using binfmt_misc and executed using wrapper. As 32bit binaries are now matched by binfmt_elf before bindmt_misc kicks in, the wrapper is ignored. The fix increases precedence of binfmt_misc to the original state. Signed-off-by: Jan Sembera <jsembera@suse.cz> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net Cc: <stable@kernel.org> [2.6.everything.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17Make do_execve() take a const filename pointerDavid Howells1-1/+1
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09convert remaining ->clear_inode() to ->evict_inode()Al Viro1-2/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-06fs/binfmt_misc.c: add terminating newline to /proc/sys/fs/binfmt_misc/statusQinghuang Feng1-1/+1
The following is what it looks like before patching. It is not much readable. user@ubuntu:/proc/sys/fs/binfmt_misc$ cat status enableduser@ubuntu:/proc/sys/fs/binfmt_misc$ Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05zero i_uid/i_gid on inode allocationAl Viro1-3/+0
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-16Allow recursion in binfmt_script and binfmt_miscKirill A. Shutemov1-2/+2
binfmt_script and binfmt_misc disallow recursion to avoid stack overflow using sh_bang and misc_bang. It causes problem in some cases: $ echo '#!/bin/ls' > /tmp/t0 $ echo '#!/tmp/t0' > /tmp/t1 $ echo '#!/tmp/t1' > /tmp/t2 $ chmod +x /tmp/t* $ /tmp/t2 zsh: exec format error: /tmp/t2 Similar problem with binfmt_misc. This patch introduces field 'recursion_depth' into struct linux_binprm to track recursion level in binfmt_misc and binfmt_script. If recursion level more then BINPRM_MAX_RECURSION it generates -ENOEXEC. [akpm@linux-foundation.org: make linux_binprm.recursion_depth a uint] Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20binfmt_misc: fix false -ENOEXEC when coupled with other binary handlersPavel Emelyanov1-2/+2
In case the binfmt_misc binary handler is registered *before* the e.g. script one (when for example being compiled as a module) the following situation may occur: 1. user launches a script, whose interpreter is a misc binary; 2. the load_misc_binary sets the misc_bang and returns -ENOEVEC, since the binary is a script; 3. the load_script_binary loads one and calls for search_binary_hander to run the interpreter; 4. the load_misc_binary is called again, but refuses to load the binary due to misc_bang bit set. The fix is to move the misc_bang setting lower - prior to the actual call to the search_binary_handler. Caused by the commit 3a2e7f47 (binfmt_misc.c: avoid potential kernel stack overflow) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24binfmt_misc: use simple_read_from_buffer()Akinobu Mita1-17/+3
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>