| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rui Salvaterra reported that Aisleroit solitaire crashes with "Wrong
__data_start/_end pair" assertion from libgc after update to v5.17-rc1.
Bisection pointed to commit 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD
p_align values for static PIE") that fixed handling of static PIEs, but
made the condition that guards load_bias calculation to exclude loader
binaries.
Restoring the check for presence of interpreter fixes the problem.
Link: https://lkml.kernel.org/r/20220202121433.3697146-1-rppt@kernel.org
Fixes: 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extend commit ce81bb256a22 ("fs/binfmt_elf: use PT_LOAD p_align values
for suitable start address") which fixed PIE binaries built with
-Wl,-z,max-page-size=0x200000, to cover static PIE binaries. This
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=215275
Tested by verifying static PIE binaries with -Wl,-z,max-page-size=0x200000 loading.
Link: https://lkml.kernel.org/r/20211209174052.370537-1-hjl.tools@gmail.com
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is better to use get_task_comm() instead of the open coded string
copy as we do in other places.
struct elf_prpsinfo is used to dump the task information in userspace
coredump or kernel vmcore. Below is the verification of vmcore,
crash> ps
PID PPID CPU TASK ST %MEM VSZ RSS COMM
0 0 0 ffffffff9d21a940 RU 0.0 0 0 [swapper/0]
> 0 0 1 ffffa09e40f85e80 RU 0.0 0 0 [swapper/1]
> 0 0 2 ffffa09e40f81f80 RU 0.0 0 0 [swapper/2]
> 0 0 3 ffffa09e40f83f00 RU 0.0 0 0 [swapper/3]
> 0 0 4 ffffa09e40f80000 RU 0.0 0 0 [swapper/4]
> 0 0 5 ffffa09e40f89f80 RU 0.0 0 0 [swapper/5]
0 0 6 ffffa09e40f8bf00 RU 0.0 0 0 [swapper/6]
> 0 0 7 ffffa09e40f88000 RU 0.0 0 0 [swapper/7]
> 0 0 8 ffffa09e40f8de80 RU 0.0 0 0 [swapper/8]
> 0 0 9 ffffa09e40f95e80 RU 0.0 0 0 [swapper/9]
> 0 0 10 ffffa09e40f91f80 RU 0.0 0 0 [swapper/10]
> 0 0 11 ffffa09e40f93f00 RU 0.0 0 0 [swapper/11]
> 0 0 12 ffffa09e40f90000 RU 0.0 0 0 [swapper/12]
> 0 0 13 ffffa09e40f9bf00 RU 0.0 0 0 [swapper/13]
> 0 0 14 ffffa09e40f98000 RU 0.0 0 0 [swapper/14]
> 0 0 15 ffffa09e40f9de80 RU 0.0 0 0 [swapper/15]
It works well as expected.
Some comments are added to explain why we use the hard-coded 16.
Link: https://lkml.kernel.org/r/20211120112738.45980-5-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
"A -= B; A" is equivalent to "A -= B".
Link: https://lkml.kernel.org/r/YVmcP256fRMqCwgK@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf
executable mappings") reverted back to using MAP_FIXED to map ELF LOAD
segments because it was found that the segments in some binaries overlap
and can cause MAP_FIXED_NOREPLACE to fail.
The original intent of MAP_FIXED_NOREPLACE in the ELF loader was to
prevent the silent clobbering of an existing mapping (e.g. stack) by
the ELF image, which could lead to exploitable conditions. Quoting
commit 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map"),
which originally introduced the use of MAP_FIXED_NOREPLACE in the
loader:
Both load_elf_interp and load_elf_binary rely on elf_map to map
segments [to a specific] address and they use MAP_FIXED to enforce
that. This is however [a] dangerous thing prone to silent data
corruption which can be even exploitable.
...
Let's take CVE-2017-1000253 as an example ... we could end up mapping
[the executable] over the existing stack ... The [stack layout] issue
has been fixed since then ... So we should be safe and any [similar]
attack should be impractical. On the other hand this is just too
subtle [an] assumption ... it can break quite easily and [be] hard to
spot.
...
Address this [weakness] by changing MAP_FIXED to the newly added
MAP_FIXED_NOREPLACE. This will mean that mmap will fail if there is
an existing mapping clashing with the requested one [instead of
silently] clobbering it.
Then processing ET_DYN binaries the loader already calculates a total
size for the image when the first segment is mapped, maps the entire
image, and then unmaps the remainder before the remaining segments are
then individually mapped.
To avoid the earlier problems (legitimate overlapping LOAD segments
specified in the ELF), apply the same logic to ET_EXEC binaries as well.
For both ET_EXEC and ET_DYN+INTERP use MAP_FIXED_NOREPLACE for the
initial total size mapping and then use MAP_FIXED to build the final
(possibly legitimately overlapping) mappings. For ET_DYN w/out INTERP,
continue to map at a system-selected address in the mmap region.
Link: https://lkml.kernel.org/r/20210916215947.3993776-1-keescook@chromium.org
Link: https://lore.kernel.org/lkml/1595869887-23307-2-git-send-email-anthony.yznaga@oracle.com
Co-developed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Chen Jingwen <chenjingwen6@huawei.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull per signal_struct coredumps from Eric Biederman:
"Current coredumps are mixed up with the exit code, the signal handling
code, and the ptrace code making coredumps much more complicated than
necessary and difficult to follow.
This series of changes starts with ptrace_stop and cleans it up,
making it easier to follow what is happening in ptrace_stop. Then
cleans up the exec interactions with coredumps. Then cleans up the
coredump interactions with exit. Finally the coredump interactions
with the signal handling code is cleaned up.
The first and last changes are bug fixes for minor bugs.
I believe the fact that vfork followed by execve can kill the process
the called vfork if exec fails is sufficient justification to change
the userspace visible behavior.
In previous discussions some of these changes were organized
differently and individually appeared to make the code base worse. As
currently written I believe they all stand on their own as cleanups
and bug fixes.
Which means that even if the worst should happen and the last change
needs to be reverted for some unimaginable reason, the code base will
still be improved.
If the worst does not happen there are a more cleanups that can be
made. Signals that generate coredumps can easily become eligible for
short circuit delivery in complete_signal. The entire rendezvous for
generating a coredump can move into get_signal. The function
force_sig_info_to_task be written in a way that does not modify the
signal handling state of the target task (because coredumps are
eligible for short circuit delivery). Many of these future cleanups
can be done another way but nothing so cleanly as if coredumps become
per signal_struct"
* 'per_signal_struct_coredumps-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
coredump: Limit coredumps to a single thread group
coredump: Don't perform any cleanups before dumping core
exit: Factor coredump_exit_mm out of exit_mm
exec: Check for a pending fatal signal instead of core_state
ptrace: Remove the unnecessary arguments from arch_ptrace_stop
signal: Remove the bogus sigkill_pending in ptrace_stop
|
|
Today when a signal is delivered with a handler of SIG_DFL whose
default behavior is to generate a core dump not only that process but
every process that shares the mm is killed.
In the case of vfork this looks like a real world problem. Consider
the following well defined sequence.
if (vfork() == 0) {
execve(...);
_exit(EXIT_FAILURE);
}
If a signal that generates a core dump is received after vfork but
before the execve changes the mm the process that called vfork will
also be killed (as the mm is shared).
Similarly if the execve fails after the point of no return the kernel
delivers SIGSEGV which will kill both the exec'ing process and because
the mm is shared the process that called vfork as well.
As far as I can tell this behavior is a violation of people's
reasonable expectations, POSIX, and is unnecessarily fragile when the
system is low on memory.
Solve this by making a userspace visible change to only kill a single
process/thread group. This is possible because Jann Horn recently
modified[1] the coredump code so that the mm can safely be modified
while the coredump is happening. With LinuxThreads long gone I don't
expect anyone to have a notice this behavior change in practice.
To accomplish this move the core_state pointer from mm_struct to
signal_struct, which allows different thread groups to coredump
simultatenously.
In zap_threads remove the work to kill anything except for the current
thread group.
v2: Remove core_state from the VM_BUG_ON_MM print to fix
compile failure when CONFIG_DEBUG_VM is enabled.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
[1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3")
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133
Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf
executable mappings") we still leave MAP_FIXED_NOREPLACE in place for
load_elf_interp.
Unfortunately, this will cause kernel to fail to start with:
1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already
Failed to execute /init (error -17)
The reason is that the elf interpreter (ld.so) has overlapping segments.
readelf -l ld-2.31.so
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x000000000002c94c 0x000000000002c94c R E 0x10000
LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0
0x00000000000021e8 0x0000000000002320 RW 0x10000
LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00
0x00000000000011ac 0x0000000000001328 RW 0x10000
The reason for this problem is the same as described in commit
ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments").
Not only executable binaries, elf interpreters (e.g. ld.so) can have
overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go
back to MAP_FIXED in load_elf_interp.
Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map")
Cc: <stable@vger.kernel.org> # v4.19
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At exec time when we mmap the new executable via MAP_DENYWRITE we have it
opened via do_open_execat() and already deny_write_access()'ed the file
successfully. Once exec completes, we allow_write_acces(); however,
we set mm->exe_file in begin_new_exec() via set_mm_exe_file() and
also deny_write_access() as long as mm->exe_file remains set. We'll
effectively deny write access to our executable via mm->exe_file
until mm->exe_file is changed -- when the process is removed, on new
exec, or via sys_prctl(PR_SET_MM_MAP/EXE_FILE).
Let's remove all usage of MAP_DENYWRITE, it's no longer necessary for
mm->exe_file.
In case of an elf interpreter, we'll now only deny write access to the file
during exec. This is somewhat okay, because the interpreter behaves
(and sometime is) a shared library; all shared libraries, especially the
ones loaded directly in user space like via dlopen() won't ever be mapped
via MAP_DENYWRITE, because we ignore that from user space completely;
these shared libraries can always be modified while mapped and executed.
Let's only special-case the main executable, denying write access while
being executed by a process. This can be considered a minor user space
visible change.
While this is a cleanup, it also fixes part of a problem reported with
VM_DENYWRITE on overlayfs, as VM_DENYWRITE is effectively unused with
this patch and will be removed next:
"Overlayfs did not honor positive i_writecount on realfile for
VM_DENYWRITE mappings." [1]
[1] https://lore.kernel.org/r/YNHXzBgzRrZu1MrD@miu.piliscsaba.redhat.com/
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
uselib() is the legacy systemcall for loading shared libraries.
Nowadays, applications use dlopen() to load shared libraries, completely
implemented in user space via mmap().
For example, glibc uses MAP_COPY to mmap shared libraries. While this
maps to MAP_PRIVATE | MAP_DENYWRITE on Linux, Linux ignores any
MAP_DENYWRITE specification from user space in mmap.
With this change, all remaining in-tree users of MAP_DENYWRITE use it
to map an executable. We will be able to open shared libraries loaded
via uselib() writable, just as we already can via dlopen() from user
space.
This is one step into the direction of removing MAP_DENYWRITE from the
kernel. This can be considered a minor user space visible change.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
Ever since commit e9714acf8c43 ("mm: kill vma flag VM_EXECUTABLE and
mm->num_exe_file_vmas"), VM_EXECUTABLE is gone and MAP_EXECUTABLE is
essentially completely ignored. Let's remove all usage of MAP_EXECUTABLE.
[akpm@linux-foundation.org: fix blooper in fs/binfmt_aout.c. per David]
Link: https://lkml.kernel.org/r/20210421093453.6904-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
|
|
have dump_skip() just remember how much needs to be skipped,
leave actual seeks/writing zeroes to the next dump_emit()
or the end of coredump output, whichever comes first.
And instead of playing with do_truncate() in the end, just
write one NUL at the end of the last gap (if any).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Optimize parisc page table locks by using the existing
page_table_lock
- Export argv0-preserve flag in binfmt_misc for usage in qemu-user
- Fix interrupt table (IVT) checksum so firmware will call crash
handler (HPMC)
- Increase IRQ stack to 64kb on 64-bit kernel
- Switch to common devmem_is_allowed() implementation
- Minor fix to get_whan()
* 'parisc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
binfmt_misc: pass binfmt_misc flags to the interpreter
parisc: Optimize per-pagetable spinlocks
parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
parisc: Bump 64-bit IRQ stack size to 64 KB
parisc: Fix IVT checksum calculation wrt HPMC
parisc: Use the generic devmem_is_allowed()
parisc: Drop out of get_whan() if task is running again
|
|
It can be useful to the interpreter to know which flags are in use.
For instance, knowing if the preserve-argv[0] is in use would
allow to skip the pathname argument.
This patch uses an unused auxiliary vector, AT_FLAGS, to add a
flag to inform interpreter if the preserve-argv[0] is enabled.
Note by Helge Deller:
The real-world user of this patch is qemu-user, which needs to know
if it has to preserve the argv[0]. See Debian bug #970460.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: YunQiang Su <ysu@wavecomp.com>
URL: http://bugs.debian.org/970460
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Preparations to doing i386 compat elf_prstatus sanely - rather than duplicating
the beginning of compat_elf_prstatus, take these fields into a separate
structure (compat_elf_prstatus_common), so that it could be reused. Due to
the incestous relationship between binfmt_elf.c and compat_binfmt_elf.c we
need the same shape change done to native struct elf_prstatus, gathering the
fields prior to pr_reg into a new structure (struct elf_prstatus_common).
Fortunately, offset of pr_reg is always a multiple of 16 with no padding
right before it, so it's possible to turn all the stuff prior to it into
a single member without disturbing the layout.
[build fix from Geert Uytterhoeven folded in]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
On 64bit architectures that support 32bit processes there are
two possible layouts for NT_PRSTATUS note in ELF coredumps.
For one thing, several fields are 64bit for native processes
and 32bit for compat ones (pr_sigpend, etc.). For another,
the register dump is obviously different - the size and number
of registers are not going to be the same for 32bit and 64bit
variants of processor.
Usually that's handled by having two structures - elf_prstatus
for native layout and compat_elf_prstatus for 32bit one.
32bit processes are handled by fs/compat_binfmt_elf.c, which
defines a macro called 'elf_prstatus' that expands to compat_elf_prstatus.
Then it includes fs/binfmt_elf.c, which makes all references to
struct elf_prstatus to be textually replaced with struct
compat_elf_prstatus. Ugly and somewhat brittle, but it works.
However, amd64 is worse - there are _three_ possible layouts.
One for native 64bit processes, another for i386 (32bit) processes
and yet another for x32 (32bit address space with full 64bit
registers).
Both i386 and x32 processes are handled by fs/compat_binfmt_elf.c,
with usual compat_binfmt_elf.c trickery. However, the layouts
for i386 and x32 are not identical - they have the common beginning,
but the register dump part (pr_reg) is bigger on x32. Worse, pr_reg
is not the last field - it's followed by int pr_fpvalid, so that
field ends up at different offsets for i386 and x32 layouts.
Fortunately, there's not much code that cares about any of that -
it's all encapsulated in fill_thread_core_info(). Since x32
variant is bigger, we define compat_elf_prstatus to match that
layout. That way i386 processes have enough space to fit
their layout into.
Moreover, since these layouts are identical prior to pr_reg,
we don't need to distinguish x32 and i386 cases when we are
setting the fields prior to pr_reg.
Filling pr_reg itself is done by calling ->get() method of
appropriate regset, and that method knows what layout (and size)
to use.
We do need to distinguish x32 and i386 cases only for two
things: setting ->pr_fpvalid (offset differs for x32 and
i386) and choosing the right size for our note.
The way it's done is Not Nice, for the lack of more accurate
printable description. There are two macros (PRSTATUS_SIZE and
SET_PR_FPVALID), that default essentially to sizeof(struct elf_prstatus)
and (S)->pr_fpvalid = 1. On x86 asm/compat.h provides its own
variants.
Unfortunately, quite a few things go wrong there:
* PRSTATUS_SIZE doesn't use the normal test for process
being an x32 one; it compares the size reported by regset with
the size of pr_reg.
* it hardcodes the sizes of x32 and i386 variants (296 and 144
resp.), so if some change in includes leads to asm/compat.h pulled
in by fs/binfmt_elf.c we are in trouble - it will end up using
the size of x32 variant for 64bit processes.
* it's in the wrong place; asm/compat.h couldn't define
the structure for i386 layout, since it lacks quite a few types
needed for it. Hardcoded sizes are largely due to that.
The proper fix would be to have an explicitly defined i386 variant
of structure and have PRSTATUS_SIZE/SET_PR_FPVALID check for
TIF_X32 to choose the variant that should be used. Unfortunately,
that requires some manipulations of headers; we'll do that later
in the series, but for now let's go with the minimal variant -
rename PRSTATUS_SIZE in asm/compat.h to COMPAT_PRSTATUS_SIZE,
have fs/compat_binfmt_elf.c define PRSTATUS_SIZE to COMPAT_PRSTATUS_SIZE
and use the normal TIF_X32 check in that macro. The size of i386 variant
is kept hardcoded for now. Similar story for SET_PR_FPVALID.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve updates from Eric Biederman:
"This set of changes ultimately fixes the interaction of posix file
lock and exec. Fundamentally most of the change is just moving where
unshare_files is called during exec, and tweaking the users of
files_struct so that the count of files_struct is not unnecessarily
played with.
Along the way fcheck and related helpers were renamed to more
accurately reflect what they do.
There were also many other small changes that fell out, as this is the
first time in a long time much of this code has been touched.
Benchmarks haven't turned up any practical issues but Al Viro has
observed a possibility for a lot of pounding on task_lock. So I have
some changes in progress to convert put_files_struct to always rcu
free files_struct. That wasn't ready for the merge window so that will
have to wait until next time"
* 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
exec: Move io_uring_task_cancel after the point of no return
coredump: Document coredump code exclusively used by cell spufs
file: Remove get_files_struct
file: Rename __close_fd_get_file close_fd_get_file
file: Replace ksys_close with close_fd
file: Rename __close_fd to close_fd and remove the files parameter
file: Merge __alloc_fd into alloc_fd
file: In f_dupfd read RLIMIT_NOFILE once.
file: Merge __fd_install into fd_install
proc/fd: In fdinfo seq_show don't use get_files_struct
bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu
proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu
file: Implement task_lookup_next_fd_rcu
kcmp: In get_file_raw_ptr use task_lookup_fd_rcu
proc/fd: In tid_fd_mode use task_lookup_fd_rcu
file: Implement task_lookup_fd_rcu
file: Rename fcheck lookup_fd_rcu
file: Replace fcheck_files with files_lookup_fd_rcu
file: Factor files_lookup_fd_locked out of fcheck_files
file: Rename __fcheck_files to files_lookup_fd_raw
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"Another branch with a nicely negative diffstat, just the way I
like 'em:
- Remove all uses of TIF_IA32 and TIF_X32 and reclaim the two bits in
the end (Gabriel Krisman Bertazi)
- All kinds of minor cleanups all over the tree"
* tag 'x86_cleanups_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/ia32_signal: Propagate __user annotation properly
x86/alternative: Update text_poke_bp() kernel-doc comment
x86/PCI: Make a kernel-doc comment a normal one
x86/asm: Drop unused RDPID macro
x86/boot/compressed/64: Use TEST %reg,%reg instead of CMP $0,%reg
x86/head64: Remove duplicate include
x86/mm: Declare 'start' variable where it is used
x86/head/64: Remove unused GET_CR2_INTO() macro
x86/boot: Remove unused finalize_identity_maps()
x86/uaccess: Document copy_from_user_nmi()
x86/dumpstack: Make show_trace_log_lvl() static
x86/mtrr: Fix a kernel-doc markup
x86/setup: Remove unused MCA variables
x86, libnvdimm/test: Remove COPY_MC_TEST
x86: Reclaim TIF_IA32 and TIF_X32
x86/mm: Convert mmu context ia32_compat into a proper flags field
x86/elf: Use e_machine to check for x32/ia32 in setup_additional_pages()
elf: Expose ELF header on arch_setup_additional_pages()
x86/elf: Use e_machine to select start_thread for x32
elf: Expose ELF header in compat_start_thread()
...
|
|
Oleg Nesterov recently asked[1] why is there an unshare_files in
do_coredump. After digging through all of the callers of lookup_fd it
turns out that it is
arch/powerpc/platforms/cell/spufs/coredump.c:coredump_next_context
that needs the unshare_files in do_coredump.
Looking at the history[2] this code was also the only piece of coredump code
that required the unshare_files when the unshare_files was added.
Looking at that code it turns out that cell is also the only
architecture that implements elf_coredump_extra_notes_size and
elf_coredump_extra_notes_write.
I looked at the gdb repo[3] support for cell has been removed[4] in binutils
2.34. Geoff Levand reports he is still getting questions on how to
run modern kernels on the PS3, from people using 3rd party firmware so
this code is not dead. According to Wikipedia the last PS3 shipped in
Japan sometime in 2017. So it will probably be a little while before
everyone's hardware dies.
Add some comments briefly documenting the coredump code that exists
only to support cell spufs to make it easier to understand the
coredump code. Eventually the hardware will be dead, or their won't
be userspace tools, or the coredump code will be refactored and it
will be too difficult to update a dead architecture and these comments
make it easy to tell where to pull to remove cell spufs support.
[1] https://lkml.kernel.org/r/20201123175052.GA20279@redhat.com
[2] 179e037fc137 ("do_coredump(): make sure that descriptor table isn't shared")
[3] git://sourceware.org/git/binutils-gdb.git
[4] abf516c6931a ("Remove Cell Broadband Engine debugging support").
Link: https://lkml.kernel.org/r/87h7pdnlzv.fsf_-_@x220.int.ebiederm.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Like it is done for SET_PERSONALITY with ARM, which requires the ELF
header to select correct personality parameters, x86 requires the
headers when selecting which VDSO to load, instead of relying on the
going-away TIF_IA32/X32 flags.
Add an indirection macro to arch_setup_additional_pages(), that x86 can
reimplement to receive the extra parameter just for ELF files. This
requires no changes to other architectures, who can continue to use the
original arch_setup_additional_pages for ELF and non-ELF binaries.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201004032536.1229030-8-krisman@collabora.com
|
|
Like it is done for SET_PERSONALITY with x86, which requires the ELF header
to select correct personality parameters, x86 requires the headers on
compat_start_thread() to choose starting CS for ELF32 binaries, instead of
relying on the going-away TIF_IA32/X32 flags.
Add an indirection macro to ELF invocations of START_THREAD, that x86 can
reimplement to receive the extra parameter just for ELF files. This
requires no changes to other architectures who don't need the header
information, they can continue to use the original start_thread for ELF and
non-ELF binaries, and it prevents affecting non-ELF code paths for x86.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201004032536.1229030-6-krisman@collabora.com
|
|
create_elf_tables() runs after setup_new_exec(), so other tasks can
already access our new mm and do things like process_madvise() on it. (At
the time I'm writing this commit, process_madvise() is not in mainline
yet, but has been in akpm's tree for some time.)
While I believe that there are currently no APIs that would actually allow
another process to mess up our VMA tree (process_madvise() is limited to
MADV_COLD and MADV_PAGEOUT, and uring and userfaultfd cannot reach an mm
under which no syscalls have been executed yet), this seems like an
accident waiting to happen.
Let's make sure that we always take the mmap lock around GUP paths as long
as another process might be able to see the mm.
(Yes, this diff looks suspicious because we drop the lock before doing
anything with `vma`, but that's because we actually don't do anything with
it apart from the NULL check.)
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lkml.kernel.org/r/CAG48ez1-PBCdv3y8pn-Ty-b+FmBSLwDuVKFSt8h7wARLy0dF-Q@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In both binfmt_elf and binfmt_elf_fdpic, use a new helper
dump_vma_snapshot() to take a snapshot of the VMA list (including the gate
VMA, if we have one) while protected by the mmap_lock, and then use that
snapshot instead of walking the VMA list without locking.
An alternative approach would be to keep the mmap_lock held across the
entire core dumping operation; however, keeping the mmap_lock locked while
we may be blocked for an unbounded amount of time (e.g. because we're
dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock
blocks things like the ->release handler of userfaultfd, and we don't
really want critical system daemons to grind to a halt just because
someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or
something like that.
Since both the normal ELF code and the FDPIC ELF code need this
functionality (and if any other binfmt wants to add coredump support in
the future, they'd probably need it, too), implement this with a common
helper in fs/coredump.c.
A downside of this approach is that we now need a bigger amount of kernel
memory per userspace VMA in the normal ELF case, and that we need O(n)
kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't
be terribly bad.
There currently is a data race between stack expansion and anything that
reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to
mitigate that for core dumping, take the mmap_lock in write mode when
taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in
read mode, we could end up with a corrupted core dump if someone does
get_user_pages_remote() concurrently. Not really a major problem, but
taking the mmap_lock either way works here, so we might as well avoid the
issue.) (This doesn't do anything about the existing data races with stack
expansion in other mm code.)
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the moment, the binfmt_elf and binfmt_elf_fdpic code have slightly
different code to figure out which VMAs should be dumped, and if so,
whether the dump should contain the entire VMA or just its first page.
Eliminate duplicate code by reworking the binfmt_elf version into a
generic core dumping helper in coredump.c.
As part of that, change the heuristic for detecting executable/library
header pages to check whether the inode is executable instead of looking
at the file mode.
This is less problematic in terms of locking because it lets us avoid
get_user() under the mmap_sem. (And arguably it looks nicer and makes
more sense in generic code.)
Adjust a little bit based on the binfmt_elf_fdpic version: ->anon_vma is
only meaningful under CONFIG_MMU, otherwise we have to assume that the VMA
has been written to.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-5-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both fs/binfmt_elf.c and fs/binfmt_elf_fdpic.c need to dump ranges of
pages into the coredump file. Extract that logic into a common helper.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-4-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Selecting Load Addresses According to p_align", v3.
The current ELF loading mechancism provides page-aligned mappings. This
can lead to the program being loaded in a way unsuitable for file-backed,
transparent huge pages when handling PIE executables.
While specifying -z,max-page-size=0x200000 to the linker will generate
suitably aligned segments for huge pages on x86_64, the executable needs
to be loaded at a suitably aligned address as well. This alignment
requires the binary's cooperation, as distinct segments need to be
appropriately paddded to be eligible for THP.
For binaries built with increased alignment, this limits the number of
bits usable for ASLR, but provides some randomization over using fixed
load addresses/non-PIE binaries.
This patch (of 2):
The current ELF loading mechancism provides page-aligned mappings. This
can lead to the program being loaded in a way unsuitable for file-backed,
transparent huge pages when handling PIE executables.
For binaries built with increased alignment, this limits the number of
bits usable for ASLR, but provides some randomization over using fixed
load addresses/non-PIE binaries.
Tested by verifying program with -Wl,-z,max-page-size=0x200000 loading.
[akpm@linux-foundation.org: fix max() warning]
[ckennelly@google.com: augment comment]
Link: https://lkml.kernel.org/r/20200821233848.3904680-2-ckennelly@google.com
Signed-off-by: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/20200820170541.1132271-1-ckennelly@google.com
Link: https://lkml.kernel.org/r/20200820170541.1132271-2-ckennelly@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Two new helpers: given a process and regset, dump into a buffer.
regset_get() takes a buffer and size, regset_get_alloc() takes size
and allocates a buffer.
Return value in both cases is the amount of data actually dumped in
case of success or -E... on error.
In both cases the size is capped by regset->n * regset->size, so
->get() is called with offset 0 and size no more than what regset
expects.
binfmt_elf.c callers of ->get() are switched to using those; the other
caller (copy_regset_to_user()) will need some preparations to switch.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc uaccess updates from Al Viro:
"Assorted uaccess patches for this cycle - the stuff that didn't fit
into thematic series"
* 'uaccess.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bpf: make bpf_check_uarg_tail_zero() use check_zeroed_user()
x86: kvm_hv_set_msr(): use __put_user() instead of 32bit __clear_user()
user_regset_copyout_zero(): use clear_user()
TEST_ACCESS_OK _never_ had been checked anywhere
x86: switch cp_stat64() to unsafe_put_user()
binfmt_flat: don't use __put_user()
binfmt_elf_fdpic: don't use __... uaccess primitives
binfmt_elf: don't bother with __{put,copy_to}_user()
pselect6() and friends: take handling the combined 6th/7th args into helper
|
|
Merge yet more updates from Andrew Morton:
- More MM work. 100ish more to go. Mike Rapoport's "mm: remove
__ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue
- Various other little subsystems
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
lib/ubsan.c: fix gcc-10 warnings
tools/testing/selftests/vm: remove duplicate headers
selftests: vm: pkeys: fix multilib builds for x86
selftests: vm: pkeys: use the correct page size on powerpc
selftests/vm/pkeys: override access right definitions on powerpc
selftests/vm/pkeys: test correct behaviour of pkey-0
selftests/vm/pkeys: introduce a sub-page allocator
selftests/vm/pkeys: detect write violation on a mapped access-denied-key page
selftests/vm/pkeys: associate key on a mapped page and detect write violation
selftests/vm/pkeys: associate key on a mapped page and detect access violation
selftests/vm/pkeys: improve checks to determine pkey support
selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
selftests/vm/pkeys: fix number of reserved powerpc pkeys
selftests/vm/pkeys: introduce powerpc support
selftests/vm/pkeys: introduce generic pkey abstractions
selftests: vm: pkeys: use the correct huge page size
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
selftests/vm/pkeys: fix pkey_disable_clear()
selftests: vm: pkeys: add helpers for pkey bits
...
|
|
The ifndef was added a long time ago to support archs that would define
their own mapping function. The last user was the metag arch which was
removed from the tree, and as such there are no users left. Let's kill
it.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200402161543.4119-1-ailiop@suse.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve updates from Eric Biederman:
"Last cycle for the Nth time I ran into bugs and quality of
implementation issues related to exec that could not be easily be
fixed because of the way exec is implemented. So I have been digging
into exec and cleanup up what I can.
I don't think I have exec sorted out enough to fix the issues I
started with but I have made some headway this cycle with 4 sets of
changes.
- promised cleanups after introducing exec_update_mutex
- trivial cleanups for exec
- control flow simplifications
- remove the recomputation of bprm->cred
The net result is code that is a bit easier to understand and work
with and a decrease in the number of lines of code (if you don't count
the added tests)"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (24 commits)
exec: Compute file based creds only once
exec: Add a per bprm->file version of per_clear
binfmt_elf_fdpic: fix execfd build regression
selftests/exec: Add binfmt_script regression test
exec: Remove recursion from search_binary_handler
exec: Generic execfd support
exec/binfmt_script: Don't modify bprm->buf and then return -ENOEXEC
exec: Move the call of prepare_binprm into search_binary_handler
exec: Allow load_misc_binary to call prepare_binprm unconditionally
exec: Convert security_bprm_set_creds into security_bprm_repopulate_creds
exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds
exec: Teach prepare_exec_creds how exec treats uids & gids
exec: Set the point of no return sooner
exec: Move handling of the point of no return to the top level
exec: Run sync_mm_rss before taking exec_update_mutex
exec: Fix spelling of search_binary_handler in a comment
exec: Move the comment from above de_thread to above unshare_sighand
exec: Rename flush_old_exec begin_new_exec
exec: Move most of setup_new_exec into flush_old_exec
exec: In setup_new_exec cache current in the local variable me
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/coredump updates from Al Viro:
"set_fs() removal in coredump-related area - mostly Christoph's
stuff..."
* 'work.set_fs-exec' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump
binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump
binfmt_elf: remove the set_fs in fill_siginfo_note
signal: refactor copy_siginfo_to_user32
powerpc/spufs: simplify spufs core dumping
powerpc/spufs: stop using access_ok
powerpc/spufs: fix copy_to_user while atomic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
|
KMSAN reported uninitialized data being written to disk when dumping
core. As a result, several kilobytes of kmalloc memory may be written
to the core file and then read by a non-privileged user.
Reported-by: sam <sunhaoyl@outlook.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com
Link: https://github.com/google/kmsan/issues/76
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most of the support for passing the file descriptor of an executable
to an interpreter already lives in the generic code and in binfmt_elf.
Rework the fields in binfmt_elf that deal with executable file
descriptor passing to make executable file descriptor passing a first
class concept.
Move the fd_install from binfmt_misc into begin_new_exec after the new
creds have been installed. This means that accessing the file through
/proc/<pid>/fd/N is able to see the creds for the new executable
before allowing access to the new executables files.
Performing the install of the executables file descriptor after
the point of no return also means that nothing special needs to
be done on error. The exiting of the process will close all
of it's open files.
Move the would_dump from binfmt_misc into begin_new_exec right
after would_dump is called on the bprm->file. This makes it
obvious this case exists and that no nesting of bprm->file is
currently supported.
In binfmt_misc the movement of fd_install into generic code means
that it's special error exit path is no longer needed.
Link: https://lkml.kernel.org/r/87y2poyd91.fsf_-_@x220.int.ebiederm.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is and has been for a very long time been a lot more going on in
flush_old_exec than just flushing the old state. After the movement
of code from setup_new_exec there is a whole lot more going on than
just flushing the old executables state.
Rename flush_old_exec to begin_new_exec to more accurately reflect
what this function does.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The two functions are now always called one right after the
other so merge them together to make future maintenance easier.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is no logic in elf_core_dump itself or in the various arch helpers
called from it which use uaccess routines on kernel pointers except for
the file writes thate are nicely encapsulated by using __kernel_write in
dump_emit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The code in binfmt_elf.c is differnt from the rest of the code that
processes siginfo, as it sends siginfo from a kernel buffer to a file
rather than from kernel memory to userspace buffers. To remove it's
use of set_fs the code needs some different siginfo helpers.
Add the helper copy_siginfo_to_external to copy from the kernel's
internal siginfo layout to a buffer in the siginfo layout that
userspace expects.
Modify fill_siginfo_note to use copy_siginfo_to_external instead of
set_fs and copy_siginfo_to_user.
Update compat_binfmt_elf.c to use the previously added
copy_siginfo_to_external32 to handle the compat case.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Merge in user support for Branch Target Identification, which narrowly
missed the cut for 5.7 after a late ABI concern.
* for-next/bti-user:
arm64: bti: Document behaviour for dynamically linked binaries
arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY
arm64: BTI: Add Kconfig entry for userspace BTI
mm: smaps: Report arm64 guarded pages in smaps
arm64: mm: Display guarded pages in ptdump
KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: traps: Shuffle code to eliminate forward declarations
arm64: unify native/compat instruction skipping
arm64: BTI: Decode BYTPE bits when printing PSTATE
arm64: elf: Enable BTI at exec based on ELF program properties
elf: Allow arch to tweak initial mmap prot flags
arm64: Basic Branch Target Identification support
ELF: Add ELF program property parsing support
ELF: UAPI and Kconfig additions for ELF program properties
|
|
Static executables don't need to free NULL pointer.
It doesn't matter really because static executable is not common scenario
but do it anyway out of pedantry.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200219185330.GA4933@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PT_INTERP ELF header can be spared if executable is static.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200219185012.GB4871@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
"loc" variable became just a wrapper for PT_INTERP ELF header after main
ELF header was moved to "bprm->buf". Delete it.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200219184847.GA4871@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This replaces all remaining open encodings with is_vm_hugetlb_page().
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Will Deacon <will@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1582520593-30704-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
